summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2024-06-02libcamera: software_isp: Remove DebayerParams::kGain10Milan Zamazal
The constant is used in a single place internally and doesn't belong to DebayerParams anymore. Let's use 256 directly. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-02libcamera: software_isp: Move color mappings out of debayeringMilan Zamazal
Constructing the color mapping tables is related to stats rather than debayering, where they are applied. Let's move the corresponding code to stats processing. The same applies to the auxiliary gamma table. As the gamma value is currently fixed and used in a single place, with the temporary exception mentioned below, there is no need to share it anywhere anymore. It's necessary to initialize SoftwareIsp::debayerParams_ to default values. These initial values are used for the first two frames, before they are changed based on determined stats. To avoid sharing the gamma value constant in artificial ways, we use 0.5 directly in the initialization. This all is not a particularly elegant thing to do, such a code belongs conceptually to the similar code in stats processing, but doing better is left for larger refactoring. This is a preliminary step towards building this functionality on top of libipa/algorithm.h, which should follow. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-02libcamera: software_isp: Honor black level in AWBMilan Zamazal
The white balance computation didn't consider black level. This is wrong because then the computed ratios are off when they are computed from the whole brightness range rather than the sensor range. This patch adjusts white balance computation for the black level. There is no need to change white balance application in debayering as this is already applied after black level correction. Exposure computation already subtracts black level, no changes are needed there. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-02libcamera: software_isp: Use a specific integer type for black levelMilan Zamazal
The documented range of values corresponds to uint8_t, so let's use that type. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-31ipa: rkisp1: Add a helper to convert floating-point to fixed-pointPaul Elder
Add helper functions for converting between floating point and fixed point numbers. Also add tests for them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-27ipa: rpi: Make monoSensor() accessor constLaurent Pinchart
The ipa::RPi::IpaBase::monoSensor() function doesn't modify the class. Make it const. Fixes: 2031e2f29014 ("ipa: rpi: Add accessor function for monoSensor_") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-05-16ipa: rpi: Add accessor function for monoSensor_Naushir Patuck
The monoSensor_ member variable will be used by the derived IPAs in an upcoming commit, so add an accessor function for it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-16ipa: rpi: Add HDR supportNaushir Patuck
Add support for the following HDR modes in the Raspberry Pi IPA: - Night mode - Single exposure mode - Multi-exposure (merged and unmerged) The algorithm is updated to expect the HDR short channel to meter explicitly for highlights. This means that it will not in general under-expose the short channel more than is actually necessary. When images don't have much saturation, it's good to detect this so that some of the boost we want to apply to the dark areas can be implemented as regular gain. This means we can then adjust the tone curve less, leading to less flat looking images. The impact on the HDR algorithm is then that this determines how we build tonemaps dynamically. The highlights are more-or-less correct now, so we have to build a power-type curve that gives us the appropriately configured targets in the lower part of the histogram. We allow the tuning file to supply the maximum spatial gain value, rather than the whole curve (though it can supply this if it wants). Some parameter defaults are tweaked to be generally better across the range of our cameras. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14libcamera: pipeline: Rename pipelines to a shorter nameJulien Vuillaumier
The PipelineHandlerFactoryBase class has a name that is propagated to the PipelineHandler instance it creates. In present implementation, this name comes from the REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the stringified name of the PipelineHandler derived class. Therefore, PipelineHandler factories and instances names can be quite long such as "PipelineHandlerRkISP1". A libcamera user may have to explicitly refer to a PipelineHandler name for configuration purpose: one usage of the name can be to define a pipeline handlers match list and their priorities. It is desired, for user convenience, to use a short name to designate a pipeline handler. Reusing the short pipeline names already defined in the meson option files is an existing and consistent way of naming pipelines. This change adds an explicit name parameter to the REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to define the name of a pipeline handler factory, instead of the current pipeline handler class name. Each pipeline registration is updated accordingly. The short name assigned corresponds to the pipeline directory name in the source tree. It is consistent with pipelines names used in meson. Changing the pipeline name has an impact on the IPA modules: each module defines a IPAModuleInfo structure. This structure has a pipelineName member defining the pipeline handler name it shall match with. Therefore, each internal IPA module definition has to be changed to have its IPAModuleInfo pipelineName name updated with the short pipeline handler name. In addition to this pipelineName member, the IPAModuleInfo structure also has a name member, associated to the IPA module name. Having renamed the pipelines to a short name, the pipeline name and the IPA module names of the IPAModuleInfo structure are the same: for in-tree IPA, they correspond to the respective pipeline and IPA subdirectories in the source tree. However the IPA name could be different, for instance with a close source IPA implementation built out-of-tree. Thus, it makes sense to keep the IPA name in that structure, as the 2 definitions may not always be redundant. Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust for clang-format style fix, reformat commitmsg] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-13ipa: libipa: histogram: Fix documentation of constructorLaurent Pinchart
Commit 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") added a new constructor for the Histogram class. The implementation is inline in the header file, and the documentation was added in the corresponding .cpp file, but it missed the \fn directive. This causes Doxygen to complain: src/ipa/libipa/histogram.h:31: warning: Member Histogram(Span< const uint32_t > data, Transform transform) (function) of class libcamera::ipa::Histogram is not documented. src/ipa/libipa/histogram.cpp:59: warning: libcamera::ipa::Histogram::bins has @param documentation sections but no arguments Fix it. Fixes: 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-09libcamera: Drop remaining file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in all remaining locations that were not caught by the automated script as they are out of sync with the file name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09ipa: rkisp1: agc: Fix histogram constructionPaul Elder
This histogram reported by the rkisp1 hardware is 20 bits, where the upper 16 bits are meaningful integer data and the lower 4 bits are fractional and meant to be discarded. Remove these 4 bits when construction the histogram. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-09ipa: rpi: Fix for incorrectly reported max shutter speedNaushir Patuck
The maximum shutter speed calculation in the cam-helper relied on the frame duration limits being correctly set in the cam-helper's mode structure. This was not the case on first startup, so the maximum shutter speed reported back via the ControlInfo was incorrect. Fix this by setting up the camera mode in the cam-helper before querying for the max shutter value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09ipa: libipa: histogram: Add transform parameter to constructorPaul Elder
Add a parameter to the histogram constructor that takes a transformation function to apply to all the bins upon construction. This is necessary notably for the rkisp1, as the values reported from the hardware are 20 bits where the upper 16-bits are meaningful integer values and the lower 4 bits are fractional and meant to be discarded. As adding a right-shift parameter is probably too specialized, a generic function is added as a parameter instead. While at it, optimize the existing constructor to avoid push_back() into a vector with a known final size. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08ipa: rkisp1: Remove bespoke Agc functionsDaniel Scally
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc we can remove the bespoke functions from the IPA's class. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminanceDaniel Scally
Now that we have a AgcMeanLuminance class that centralises our AEGC algorithm, derive the RkISP1's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicities sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Remove bespoke AGC functions from IPU3Daniel Scally
Now that the IPU3's Agc is derived from MeanLuminanceAgc we can delete all the unecessary bespoke functions. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Derive ipu3::algorithms::Agc from AgcMeanLuminanceDaniel Scally
In preparation for switching to a derivation of AgcMeanLuminance, add a function to parse and store the statistics for easy retrieval in an overriding estimateLuminance() function. Now that we have a MeanLuminanceAgc class that centralises our AEGC algorithm, derive the IPU3's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicity's sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add AgcMeanLuminance base classDaniel Scally
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in very large part; following the Rpi IPA's algorithm in spirit with a few tunable values in that IPA being hardcoded in the libipa ones. Add a new base class for AgcMeanLuminance which implements the same algorithm and additionally parses yaml tuning files to inform an IPA module's Agc algorithm about valid constraint and exposure modes and their associated bounds. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add ExposureModeHelperPaul Elder
Add a helper for managing exposure modes and splitting exposure times into shutter and gain values. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Allow creation of empty HistogramDaniel Scally
For convenience's sake allow the creation of empty Histograms so they can be embedded within other Classes and filled out with data at some later point in time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX415 sensor propertiesAlexander Stein
Provide the Sony IMX415 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX415 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX335 sensor propertiesKieran Bingham
Provide the Sony IMX335 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX335 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX283 sensor propertiesKieran Bingham
Provide the IMX283 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX283 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-04-16libcamera: software_isp: Apply black level compensationMilan Zamazal
Black may not be represented as 0 pixel value for given hardware, it may be higher. If this is not compensated then various problems may occur such as low contrast or suboptimal exposure. The black pixel value can be either retrieved from a tuning file for the given hardware, or automatically on the fly. The former is the right and correct method, while the latter can be used when a tuning file is not available for the given hardware. Since there is currently no support for tuning files in software ISP, the automatic, hardware independent way, is always used. Support for tuning files should be added in future but it will require more work than this patch. The patch looks at the image histogram and assumes that black starts when pixel values start occurring on the left. A certain amount of the darkest pixels is ignored; it doesn't matter whether they represent various kinds of noise or are real, they are better to omit in any case to make the image looking better. It also doesn't matter whether the darkest pixels occur around the supposed black level or are spread between 0 and the black level, the difference is not important. An arbitrary threshold of 2% darkest pixels is applied; there is no magic about that value. The patch assumes that the black values for different colors are the same and doesn't attempt any other non-primitive enhancements. It cannot completely replace tuning files and simplicity, while providing visible benefit, is its goal. Anything more sophisticated is left for future patches. A possible cheap enhancement, if needed, could be setting exposure + gain to minimum values temporarily, before setting the black level. In theory, the black level should be fixed but it may not be reached in all images. For this reason, the patch updates black level only if the observed value is lower than the current one; it should be never increased. The purpose of the patch is to compensate for hardware properties. General image contrast enhancements are out of scope of this patch. Stats are still gathered as an uncorrected histogram, to avoid any confusion and to represent the raw image data. Exposure must be determined after the black level correction -- it has no influence on the sub-black area and must be correct after applying the black level correction. The granularity of the histogram is increased from 16 to 64 to provide a better precision (there is no theory behind either of those numbers). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: ipa: Add Soft IPAAndrey Konovalov
Define the Soft IPA main and event interfaces, add the Soft IPA implementation. The current src/ipa/meson.build assumes the IPA name to match the pipeline name. For this reason "-Dipas=simple" is used for the Soft IPA module. Auto exposure/gain and AWB implementation by Dennis, Toon and Martti. Auto exposure/gain targets a Mean Sample Value of 2.5 following the MSV calculation algorithm from: https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf Use CameraSensorHelper to convert the analogue gain code read from the camera sensor into real analogue gain value. In the future this makes it possible to use faster AE/AGC algorithm. Right now the CameraSensorHelper lets us use the full range of analogue gain values. If there is no CameraSensorHelper for the camera sensor in use, a warning log message is printed. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Marttico <g.martti@gmail.com> Signed-off-by: Marttico <g.martti@gmail.com> Co-developed-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-03-06ipa: rpi: cam_helper: Extend embedded data parsing to RAW14 modesNick Hollinghurst
Fix embedded data byte-skipping for 14-bit modes (4 out of 7 bytes carry register data), and allow 14-bit modes in IMX708 PDAF parsing. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-02-27libcamera: Use utils::to_underlying()Laurent Pinchart
Replace manual implementations of the utils::to_underlying() helper with calls to the function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2024-02-23ipa: rkisp1: Support the i.MX8MP ISP versionPaul Elder
Handle the RKISP1_V_IMX8MP version in the rkisp1 IPA. This enables basic support of the i.MX8MP, excluding the processing blocks specific to the new ISP version. Those will be supported later. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: Fix histogram weights configurationLaurent Pinchart
The histogram weights are initialized to hardcoded 1's for each histogram grid cell. The code uses the wrong variable for the grid size, resulting in some weights having a 0 value. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: Store hardware parameters in IPA contextLaurent Pinchart
Versions of the ISP differ in the processing blocks they include, as well as in the implementation of some of those blocks. In particular, they have different numbers of histogram bins oe AE statistics cells. The algorithms take these differences into account by checking the ISP version reported by the driver. These checks are currently scattered in multiple places. Centralize them in the IPARkISP1::init() function, and store the version-dependent hardware parameters in the IPA context, accessible by all algorithms. While at it, drop the IPASessionConfiguration::hw member that stores the revision number, unused by the algorithms. It can be added back laer to the IPAHwSettings structure if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: agc: Wrap variable length C arrays in spansLaurent Pinchart
The RkISP1 statistics structure contains multiple arrays whose length varies depending on the hardware revision. Accessing those arrays is error-prone, wrap them in spans at the top level to reduce risks of out-of-bound accesses. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-01-12libipa: camera_sensor_helper: Mark createInstance() with overrideLaurent Pinchart
The CameraSensorHelperFactory::createInstance() function overrides a virtual function from CameraSensorHelperFactoryBase. The function declaration doesn't mark it with the override keyword. This could cause issues in the future if the base class' function changes, as the compiler will not issue any warning in that case. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: data: Update tuning files for HDRDavid Plowman
All the Raspberry Pi official camera tuning files are updated for HDR. As stated previously, there is no mechanism in the hardware for combining images so all this does is enable multi-channel AGC to produce short and long exposure frames. It will be up to the application to deal with them. The changes are identical in every tuning file. 1. The existing AGC tuning is duplicated twice so that we have 3 AGC channels. 2. The first is left alone (the default AGC channel), the second is tweaked to under-expose significantly (ev -3) and the final one is tweaked to over-exposure slightly (ev +0.5) 3. Control parameters are provided to the "rpi.hdr" algorithm to associate these AGC channels correctly with the HDR modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Implement HDR controlDavid Plowman
Sufficient plumbing is added so that the HDR mode control can be used to engage HDR modes on platforms that support them. On the vc4 platform, this allows multi-channel AGC to run, though there is no image merging. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: Add OV64A40 tuning filesLee Jackson
Provide the OV64A40 tuning files for the Arducam Omnivision camera module to operate on the VC4 ISP architecture on Raspberry Pi 4 and below. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libipa: camera_sensor_helper: Add OV64A40 helperJacopo Mondi
Add a CameraSensorHelper for the OV64A40 camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Provide a Camera Helper for the OV64A40Jacopo Mondi
Support the OV64A40 sensor with a camera helper to manage the gain model, light sensitivity, and control delays. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: vc4: Implement the StatsOutputEnable vendor controlNaushir Patuck
Implement the StatsOutputEnable control for the VC4 IPA. When set, this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput metadata control. To get this working, IpaBase::libcameraMetadata_ is moved from a private to a protected member variable. This makes it accessable to the VC4 derived IPA class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: awb: Add an initialValues methodDavid Plowman
This allows the IPA to get reasonable default colour gains before AWB has run. This is particularly important on the PiSP platform where these numbers are helpful in programming the Front End statistics block in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: black_level: Add an initialValues methodDavid Plowman
This allows the IPA to discover the correct black level values even before any frames have been processed. This is important on the PiSP platform where the front end black level blocks must be programmed in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Allow the mean of an empty histogram intervalNick Hollinghurst
Don't assert when taking the weighted mean of a zero-width or zero-weight interval; return its upper bound. That is certainly correct in the zero-width case, and plausible otherwise. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-05ipa: rpi: Add hardware line rate constraintsNaushir Patuck
Advertise hardware constraints on the pixel processing rate through the Controller::HardwareConfig structure. When calculating the minimum line length during a configure() operation, ensure that we don't exceed this constraint. If we do exceed the hardware constraints, increase the modes's minimum line length so the pixel processing rate falls below the hardware limit. If this is not possible, throw a loud error message in the logs. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07meson: Tag all installed filesLaurent Pinchart
Meson uses tags to sort installed files in categories, and makes it possible to install a subset of the files using the '--tags' argument to 'meson install'. This is typically used by distributions to split the runtime, development and documentation files into separate packages. By default, meson tries to guess the correct tag for installed files, but can't always do so properly. Mark the install targets that meson can't guess with the correct install_tag. As the feature has been introduced in meson 0.60, bump the minimum meson version. The latest LTS release of all major distributions that libcamera currently targets ship a recent enough meson version. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-11-30ipa: rpi: cac: Minor code improvements and tidyingDavid Plowman
We make a few small improvements to the code: * The arrayToSet method is prevented from overwriting the end of the array if there are too many values in the input table. If you supply a table, it will force you to put the correct number of elements in it. * The arrayToSet and setStrength member functions are turned into static functions. (There may be a different public setStrength member function in future.) * When no tables at all are given, the configuration is flagged as being disabled, so that we can avoid copying tables full of zeroes around. As a consequence, the pipeline handler too will disable this hardware block rather than run it needlessly. (Note that the tuning tool will put in a completely empty "rpi.cac" block if no CAC tuning images are supplied, benefiting from this behaviour.) * The initialise member function is removed as it does nothing. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: agc: Fix bug where AeLocked was never getting setDavid Plowman
The recent change where time-filtering is done before sorting out the digital gain means that the target exposure without digital gain is no longer set, breaking the 'AeLocked' calculation. We can use the regular (full) target exposure instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain") Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30libcamera: controls: Use vendor tags for draft controls and propertiesNaushir Patuck
Label draft controls and properties through the "draft" vendor tag and deprecate the existing "draft: true" mechanism. This uses the new vendor tags mechanism to place draft controls in the same libcamera::controls::draft namespace and provide a defined control id range for these controls. This requires moving all draft controls from control_ids.yaml to control_ids_draft.yaml. One breaking change in this commit is that draft control ids also move to the libcamera::controls::draft namespace from the existing libcamera::controls namespace. This is desirable to avoid API breakages when adding new libcamera controls. So, for example, the use of controls::NOISE_REDUCTION_MODE will need to be replaced with controls::draft::NOISE_REDUCTION_MODE. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-22ipa: rpi: alsc: Do not allow zero colour ratio statisticsDavid Plowman
The algorithm computes R/G and B/G colour ratio statistics which we should not allow to go to zero because there is clearly no gain you could apply to R or B to equalise them. Instead flag such regions as having "insufficient data" in the normal manner. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-24ipa: rpi: agc: Make AGC controls affect all channelsDavid Plowman
We need to be able to do things like enable/disable AGC for all the channels, so most of the AGC controls are updated to be applied to all channels. There are a couple of exceptions, such as setting explicit shutter/gain values, which apply only to channel 0. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>