summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2022-05-18ipa: libipa: Add frame context pointer in process()Umang Jain
Currently we have a single structure of IPAFrameContext but subsequently, we shall have a ring buffer (or similar) container to keep IPAFrameContext structures for each frame. It would be a hassle to query out the frame context required for process() (since they will reside in a ring buffer) by the IPA for each process. Hence, prepare the process() libipa template to accept a particular IPAFrameContext early on. As for this patch, we shall pass in the pointer as nullptr, so that the changes compile and keep working as-is. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18ipa: ipu3: Rework IPAFrameContextUmang Jain
Currently, IPAFrameContext consolidates the values computed by the active state of the algorithms, along with the values applied on the sensor. Moving ahead, we want to have a frame context associated with each incoming request (or frame to be captured). This shouldn't necessarily be tied to "active state" of the algorithms hence: - Rename current IPAFrameContext -> IPAActiveState This will now reflect the latest active state of the algorithms and has nothing to do with any frame-related ops/values. - Re-instate IPAFrameContext with a sub-structure 'sensor' currently storing the exposure and gain value. Adapt the various access to the frame context to the new changes as described above. Subsequently, the re-instated IPAFrameContext will be extended to contain a frame number and ControlList to remember the incoming request controls provided by the application. A ring-buffer will be introduced to store these frame contexts for a certain number of frames. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-13libipa: camera_sensor_helper: Add OV5675 helperQuentin Schulz
The OV5675 is an OmniVision sensor with a linear gain model, expressed in 1/128 steps. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-10libcamera: raspberrypi: Fetch correct value for SensorSensitivityDavid Plowman
These changes retrieve the correct value for sensitivity of the mode selected for the sensor. This value is known to the CamHelper which passes it across to the pipeline handler so that it can be set correctly in the camera properties. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-09ipa: raspberrypi: Demote noisy message to DebugLaurent Pinchart
The message that prints all controls in a request in IPARPi::queueRequest() is noisy. Demote it from Info to Debug. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-04-14ipa: ipu3: af: A not initialized frame ignore counter fixingKate Hsuan
A not initialized frame ignore counter (ignoreCounter_) makes the AF function not work since the ignore counter may start from a random negative number. The counter was set to kIgnoreFrame when AF is in prepare stage. Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-14ipa: RPi: Move the IPA to the ipa::RPi namespaceJean-Michel Hautbois
Simplify name-spacing of the RPi components by placing it in the ipa::RPi namespace directly. It also aligns the RPi IPA with the other ones (ipa::ipu3 and ipa::rkisp1) which already have this applied. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-13ipa: vimc: Synchronise parameter buffer ops namingUmang Jain
Synchronise the names of the operations with respect to parameters buffer with the names used in other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-13ipa: vimc: Establish logical order of operationsUmang Jain
It is preferred that the interface definition should represent the logical order in which the operations will be called. The patch has no functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-09ipa: ipu3: af: Simplify accumulations of y_itemsKieran Bingham
Simplify the accumulation of the total and variance with a ternary operator. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use Span for y_table_item_tKieran Bingham
Convert the y_table_item_t to a Span and use that for iteration when estimating variance of the table. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Remove redundant memcpyKieran Bingham
The af statistics can be accessed directly from the mapped buffer. Remove the redundant memcpy, and simplify the call to afEstimateVariance(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use geometry classes to perform grid centeringKieran Bingham
Use our geometry classes for Rectangle, Size and Point to identify the region of interest for the autofocus, and center it on the BDS output. This will facilitate custom ROI being passed in through controls at a later time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Move constants to implementationKieran Bingham
A selection of constants are imported from ChromiumOS. Move these out of the header, and simplify their documentation. Further more, add a direct reference to the location they were obtained from. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: enforce grid size restrictionsKieran Bingham
Provide enforcement of the selection of the block_{width,height}_log2 parameters to the capabilities of the hardware. While this selection is currently hardcoded to the minimum, providing the restriction now allows for further dynamic sizing in the future and documents the restrictions directly in code, making use of the already existing constants. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-04-08ipa: ipu3: Inline parseStatistics() into processStatsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Inline fillParams() in fillParamsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Replace event-based ops with dedicated functionsUmang Jain
The IPAIPU3 interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of actions to signals are: ActionSetSensorControls => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadataReady => metadataReady The translated naming scheme of events to dedicated functions are: EventProcessControls => queueRequest() EventStatReady => processStatsBuffer() EventFillParams => fillParamsBuffer() The dedicated functions are called from pipeline-handler to the IPA using IPC. These functions run asynchronously and when completed, the IPA emits the respective signals as stated above in the translated naming scheme. The EventProcessControls is translated to queueRequest() to bring symmetry to the IPU3 interface with other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-06pipeline: raspberrypi: Add a Unicam dequeue timeoutNaushir Patuck
Enable the V4L2VideoDevice dequeue timeout for the Unicam Image node, and connect the timeout signal to a slot in the pipeline handler. This slot will log an error message informing the user of a possible hardware stall. The timeout is calculated as 2x the maximum frame length possible for a given mode, returned by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06ipa: raspberrypi: alsc: Limit the calculated lambda valuesNaushir Patuck
Under the right circumstances, the alsc calculations could spread the colour errors across the entire image as lambda remains unbound. This would cause the corrected image chroma values to slowly drift to incorrect values. This change adds a config parameter (alsc.lambda_bound) that provides an upper and lower bound to the lambda value at every stage of the calculation. With this change, we now adjust the lambda values so that the average across the entire grid is 1 instead of normalising to the minimum value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-02ipa: vimc: Rename processControls() to queueRequest()Umang Jain
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1) that uses queueRequest() to pass in the request controls to IPA. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-02ipa: rkisp1: Split queuing of request and parameter fillingUmang Jain
Queuing of request (i.e. passing of controls to the IPA) and filling of the parameters buffer are two separate operations. Treat them as such by splitting them into two functions in the rkisp1 IPA interface. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add OV5640 helperPaul Elder
The OV5640 is an OmniVision sensor with a linear gain model, expressed in 1/16 steps. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-01libipa: camera_sensor_helper: Add IMX296 helperLaurent Pinchart
The IMX296 is a Sony sensor that expresses its gain in 0.1dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add IMX290 helperLaurent Pinchart
The IMX290 is a Sony sensor that expresses its gain in 0.3dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Implement exponential gain modelLaurent Pinchart
The CameraSensorHelper specifies two gain models, linear and exponential. They are modelled after the MIPI CCS specification. Only the linear model has been implemented, the exponential model was left for later. We now need to support sensors that configure their gain in a hardware register with a value expressed in dB. This has similarities with the MIPI CCS exponential gain model, but is only has an exponential factor, while CCS also allows sensors to support a configurable linear factor. The full CCS exponential model needs two values (for the linear and exponential factors) to express a gain, while IPAs use a single linear gain value internally. However, the exponential gain model example in the CCS specification has a fixed linear factor, which may indicate that it could be common for sensors that implement the exponential gain model to only use the exponential factor. For this reason, implement the exponential gain model with a fixed linear factor, but with a sensor-specific coefficient for the exponential factor that allows expressing the gain in dB (or other logarithmical units) instead of limiting it to powers of 2 as in the MIPI CCS specification. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Reorganize gain constantsLaurent Pinchart
To prepare for other gain models than the linear model, store the gain constants in a union with per-model members. Due to the lack of designated initializer support in gcc with C++17, initializing a single complex structure that includes a union will be difficult. Split the gain model type to a separate variable to work around this issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-28ipa: ipu3: Ensure controls exists in before they are queriedUmang Jain
Add a validation check for sensor controls validateSensorControls() before they are queried in IPAIPU3::updateSessionConfiguration(). Fail the IPAIPU3::configure() if the required sensor controls are not found. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Drop sensor controls private members from IPAIPU3Umang Jain
Drop exposure, gain private members from IPAIPU3 because the values are handled directly via IPAFrameContext. Move the default vblank value from IPAIPU3 to IPASessionConfiguration structure as it is a default static value not expected to change for a session. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Consolidate querying of exposure and gain limitsUmang Jain
The exposure and gain limits are required for AGC configuration handled in IPAIPU3::updateSessionConfiguration(), which is happening already. Therefore the max/min private members in IPAIPU3 class for exposure/gain serve no use except setting initial values of exposure_ and gain_ members. Drop the max/min private members from IPAIPU3 class and set initial gain_ and exposure_ in IPAIPU3::updateSessionConfiguration(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Introduce AWBJean-Michel Hautbois
The RkISP1 ISP calculates a mean value for Y, Cr and Cb at each frame. There is a RGB mode which could theoretically give us the values for R, G and B directly, but it seems to be failing right now. Convert those values into R, G and B and estimate the gain to apply in a grey world. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: agc: Add a histogram-based gainJean-Michel Hautbois
As for the IPU3, we can estimate the histogram of the luminance. The RkISP1 can estimate multiple ones, the R, G and B ones, the Y only one and a combination of RGB. The one we are interested by in AGC is the Y histogram. Use the hardware revision to determine the number of bins of the produced histogram. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: libipa: Histogram: Constify the constructor spanJean-Michel Hautbois
The Histogram constructor does not modify the data. Pass it a Span<const uint32_t> instead of a Span<uint32_t>. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Introduce Black Level CorrectionJean-Michel Hautbois
In order to have the proper pixel levels, apply a fixed black level correction, based on the imx219 tuning file in RPi. The value is 4096 on 16 bits, and the pipeline for RkISP1 is on 12 bits, scale it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Use frame counter for the request queuedJean-Michel Hautbois
Introduce a frameCount variable in the IPAFrameContext which increments each time a request is queued. It is reset at configure call, when the camera is started. This will allow the frameCount to be used by other algorithms, without having to keep multiple private frame counters. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-23ipa: rkisp1: Replace event-based ops with dedicated functionsUmang Jain
The IPARkISP1Interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of operations to dedicated functions: ActionV4L2Set => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadata => metdataReady EventSignalStatBuffer => processStatsBuffer() EventQueueRequest => queueRequest() The lexical of IPARkISP1::metadataReady() will now conflict with the metadataReady Signal being introduced in this patch as part of the interface change. Hence, rename IPARkISP1::metadataReady() to IPARkISP1::prepareReady() to prevent the conflict. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: rkisp1: Drop private exposure and gain limitsUmang Jain
The private members of exposure and gain limits can be dropped from IPARkISP1 since they are not used class-wide and can be easily replaced by local counter-parts. In case they are required to be widely available, these should then sit in IPASessionConfiguration. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: raspberrypi: Add tuning file for IMX296 sensorNaushir Patuck
The Sony IMX296 exists in two versions, colour (Bayer) and monochrome. The tuning file corresponds to the monochrome version. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2022-03-23ipa: raspberrypi: Add camera helper for Sony IMX296 sensorNaushir Patuck
The Sony IMX296 sensor has an exponential gain model, and adds a fixed 14.26µs offset to the exposure time expressed in line units. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23ipa: raspberrypi: cam_helper: Make exposure conversion functions virtualNaushir Patuck
Some sensors (namely the Sony IMX296, whose support will be added shortly) require different conversion formulas between exposure time and exposure lines. Make the Exposure() and ExposureLines() functions virtual to allow this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23ipa: raspberrypi: awb: Fix typo in AWB mode conversion tableDavid Plowman
The AwbAuto mode is defined in all the JSON tuning files as "auto", not "normal". The effect of this was that you couldn't switch back to "auto" mode once you had switched away. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Use existing local short-hand variable in configure()Laurent Pinchart
The configure() function has a local configuration variable referencing context.configuration for the purpose of shortening lines. Use it instead of context.configuration in the remaining locations, and constify it while at it as the configuration isn't meant to be modified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Reset frame count when configuring AGCLaurent Pinchart
The frame count is used to skip the gain and exposure filtering when starting. It thus needs to be reset when configuring the algorithm, to avoid slower convergence when stopping and restarting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17libipa: Add CameraSensorHelper for OV2740Daniel Scally
The datasheet for the OV2740 gives 0x80 as 1x gain, so real gain is GainCode / 128. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: Send lens controls to pipeline handlerDaniel Scally
Pick up the focus value from the AF algorithm and send lens controls along in the frame context. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Rename ctrls_ memberDaniel Scally
Now that we have added lens controls, rename the existiing member of the class to clarify that it relates to the sensor's controls. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Add lens control member to ipu3 ipa interfaceDaniel Scally
Add further members to the ipu3 ipa interface that will hold lens controls passed in by configInfo Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: af: Auto focus for dw9719 Surface Go2 VCMKate Hsuan
Since VCM for surface Go 2 (dw9719) had been successfully driven, this Af module can be used to control the VCM and determine the focus value based on the IPU3 AF state. Based on the values from the IPU3 AF buffer, the variance of each focus step is determined and a greedy approach is used to find the maximum variance of the AF state and an appropriate focus value. The grid configuration is implemented as a context. Also, the grid parameter- AF_MIN_BLOCK_WIDTH is set to 4 (default is 3) since if the default value is used, x_start (x_start > 640) will be at an incorrect location of the image (rightmost of the sensor). Signed-off-by: Kate Hsuan <hpa@redhat.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-11ipa: ipu3: awb: Clamp gain valuesJean-Michel Hautbois
The gain values are coded as u3.13 fixed point values, ie they can not be more than 8. Clamp the values in order to avoid any off limits value which could make the IPU3 behave in a weird manner. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: agc: Introduce lineDuration in IPASessionConfigurationJean-Michel Hautbois
Instead of having a local cached value for line duration, store it in the IPASessionConfiguration::sensor structure. While at it, configure the default analogue gain and shutter speed to controlled fixed values. The latter is set to be 10ms as it will in most cases be close to the one needed, making the AGC faster to converge. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>