summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2024-01-09ipa: rpi: black_level: Add an initialValues methodDavid Plowman
This allows the IPA to discover the correct black level values even before any frames have been processed. This is important on the PiSP platform where the front end black level blocks must be programmed in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Allow the mean of an empty histogram intervalNick Hollinghurst
Don't assert when taking the weighted mean of a zero-width or zero-weight interval; return its upper bound. That is certainly correct in the zero-width case, and plausible otherwise. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-05ipa: rpi: Add hardware line rate constraintsNaushir Patuck
Advertise hardware constraints on the pixel processing rate through the Controller::HardwareConfig structure. When calculating the minimum line length during a configure() operation, ensure that we don't exceed this constraint. If we do exceed the hardware constraints, increase the modes's minimum line length so the pixel processing rate falls below the hardware limit. If this is not possible, throw a loud error message in the logs. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07meson: Tag all installed filesLaurent Pinchart
Meson uses tags to sort installed files in categories, and makes it possible to install a subset of the files using the '--tags' argument to 'meson install'. This is typically used by distributions to split the runtime, development and documentation files into separate packages. By default, meson tries to guess the correct tag for installed files, but can't always do so properly. Mark the install targets that meson can't guess with the correct install_tag. As the feature has been introduced in meson 0.60, bump the minimum meson version. The latest LTS release of all major distributions that libcamera currently targets ship a recent enough meson version. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-11-30ipa: rpi: cac: Minor code improvements and tidyingDavid Plowman
We make a few small improvements to the code: * The arrayToSet method is prevented from overwriting the end of the array if there are too many values in the input table. If you supply a table, it will force you to put the correct number of elements in it. * The arrayToSet and setStrength member functions are turned into static functions. (There may be a different public setStrength member function in future.) * When no tables at all are given, the configuration is flagged as being disabled, so that we can avoid copying tables full of zeroes around. As a consequence, the pipeline handler too will disable this hardware block rather than run it needlessly. (Note that the tuning tool will put in a completely empty "rpi.cac" block if no CAC tuning images are supplied, benefiting from this behaviour.) * The initialise member function is removed as it does nothing. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: agc: Fix bug where AeLocked was never getting setDavid Plowman
The recent change where time-filtering is done before sorting out the digital gain means that the target exposure without digital gain is no longer set, breaking the 'AeLocked' calculation. We can use the regular (full) target exposure instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain") Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30libcamera: controls: Use vendor tags for draft controls and propertiesNaushir Patuck
Label draft controls and properties through the "draft" vendor tag and deprecate the existing "draft: true" mechanism. This uses the new vendor tags mechanism to place draft controls in the same libcamera::controls::draft namespace and provide a defined control id range for these controls. This requires moving all draft controls from control_ids.yaml to control_ids_draft.yaml. One breaking change in this commit is that draft control ids also move to the libcamera::controls::draft namespace from the existing libcamera::controls namespace. This is desirable to avoid API breakages when adding new libcamera controls. So, for example, the use of controls::NOISE_REDUCTION_MODE will need to be replaced with controls::draft::NOISE_REDUCTION_MODE. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-22ipa: rpi: alsc: Do not allow zero colour ratio statisticsDavid Plowman
The algorithm computes R/G and B/G colour ratio statistics which we should not allow to go to zero because there is clearly no gain you could apply to R or B to equalise them. Instead flag such regions as having "insufficient data" in the normal manner. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-24ipa: rpi: agc: Make AGC controls affect all channelsDavid Plowman
We need to be able to do things like enable/disable AGC for all the channels, so most of the AGC controls are updated to be applied to all channels. There are a couple of exceptions, such as setting explicit shutter/gain values, which apply only to channel 0. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: agc: Fetch AWB status in the prepare methodDavid Plowman
AWB writes this out during prepare, so we may as well read it in AGC prepare as well. Reading it in process is wrong on the PiSP platform because process runs before prepare, so the AWB status won't be there (on vc4 it made no difference). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: vc4: Move denoise control handling into the VC4 derived IPANaushir Patuck
Since noise control handling differs between the VC4 and PiSP IPAs, move the current denoise control handler from ipa base into the vc4 IPA derived class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: agc: Allow AGC channels to avoid using "fast desaturation"David Plowman
"Fast desaturation" is a technique that can help the AGC algorithm to desaturate images more quickly when they are very over-exposed. However, it uses digital gain to do this which can confuse our HDR techniques. Therefore make it optional. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: alsc: Do not re-read the alsc.status metadataDavid Plowman
This was being re-read in order to determine what LSC gains had been applied. We can just retrieve these numbers from the prevAsyncResults_ instead. This will also enable other future algorithms to manipulate the LSC tables in the alsc.status, without it breaking the core ALSC algorithm here. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: hdr: Add the ability to alter the LSC tableDavid Plowman
We can perform some of the local contrast adjustment using global gains in the LSC table. We can vary the amount of gain according to the measured brightness of that image region. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: When AGC channels are changed, start with the 1st channelNaushir Patuck
Whenever the AGC active channels are changed, start with the first channel listed. This allows applications to rely on a particular channel being generated first. For example, multi-exposure HDR always wants the short channel first. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Avoid overwriting caller's statistics pointerDavid Plowman
The code was inadvertently overwriting the caller's StatisticsPtr, meaning that subsequent algorithms would get the wrong image statistics when AGC channels changed. This could be fix using std::ref, though I find the C-style pointer fix easier to understand! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: denoise: Support different denoise configurationsDavid Plowman
Some use cases may require stronger, or different, denosie settings to others. For example, the way frames are accumulated during single exposure HDR means that we may want stronger denoise. This commit adds such support for different configurations that can be defined in the tuning file. Older tuning files, or files where there is only a single configuration, load only the "normal" denoise configuration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: contrast: Allow adaptive contrast enhancement to be disabledDavid Plowman
The enableCe() function enables or disables adaptive contrast enhancement and the restoreCe() function sets it back to its normal state (which is what was read from the tuning file). In future, algorithms like HDR might want to take over tonemapping functions, so any dynamic behaviour here would upset them. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Add an AGC stable regionDavid Plowman
Add a small "stable region" parameter (defaulting to 2%) within which the AGC will not adjust the exposure it requests. It allows applications to configure the AGC to avoid continual micro-adjustments of exposure values if they are somehow sensitive to it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add new algorithms for PiSPNaushir Patuck
Add new CAC, HDR, Saturation and Tonemapping algorithms. Add a new Denoise algorithm that handles spatial/temporal/colour denoise through one interface. With this change, the old SDN algorithm is now considered deprecated and a warning message will be displayed if it is enabled. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare AWB for PiSP supportNaushir Patuck
Prepare the AWB algorithm to support the PiSP hardware. The key change is to factor in the LS correction in the AWB zone statistics. This is different from VC4 where the LS correction happens before statistics gathering. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare ALSC for PiSP supportNaushir Patuck
Prepare the ALSC algorithm to support the PiSP hardware. The key change is to avoid factoring out the WB correction in the AWB zone statistics. Add the ALSC correction to the global metadata so that AWB can use it to factor the gains back in for the AWB calculations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add PiSP definitions to the Controller hardware descriptionNaushir Patuck
Add an entry to Controller::HardwareConfig describing the PiSP hardware for the IPA and controller algorithms to use. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add statsInline to the Controller hardware descriptionNaushir Patuck
Add a new boolean field (statsInline) to Controller::HardwareConfigMap. This field indicates where the statistics are generated in the hardware ISP pipeline. For statsInline == true, statistics are generated before the frame is processed (e.g. the PiSP case), and statsInline == false indicates statistics are generated after the frame is processed (e.g. the VC4 case). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add try_lock() to RPiController::MetadataNaushir Patuck
Add the missing try_lock() member function to RPiController::Metadata. This will allow RPiController::Metadata to be used as a template parameter in std::scoped_lock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18mojom: pipeline: ipa: rpi: Add fields for PiSP objectsNaushir Patuck
Add the PiSP Frontend and Backend SharedMemObject file descriptors to the ipa::init() call. This will allow the pipeline handler to pass these objects to the IPA after construction. Add a flag to indicate if buffer swaps are needed when starting the ISP for the stitch block. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add IpaBase::platformStart() member functionNaushir Patuck
Add a virtual IpaBase::platformStart() member function that is called at the end of IpaBase::start(). For the IpaVc4 derived class, this function does nothing, but will be used in the PiSP derived class to reset internal state on startup. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-05ipa: rpi: Avoid skipping IPAs on the first frame after the drop framesDavid Plowman
We avoid skipping the IPAs while frameCount_ is less than dropFrameCount_, indicating that these frames will not be sent to the application. This means that when these numbers are equal then this is the first frame the application will get, so again, we must avoid skipping the IPAs. Consequently the test here must avoid the case of equality. Fixes: 51533fecae8d ("ipa: rpi: Fix frame count logic when running algorithms") Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-25pipeline: rpi: Reset the frame lengths queue during configureNaushir Patuck
The IPA stores a list of the last 10 frame lengths applied to the sensor for determining the timeout to use. This list gets reset on start(), but there is a path through the code that accesses this list in configure() which happens earlier, causing a logical error. Fix this by constructing the list with 10 initial values of 0s. Bug: https://github.com/raspberrypi/libcamera/issues/64 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-25ipa: rpi: Fix frame count logic when running algorithmsNaushir Patuck
The frame counter test to determine if we run the IPA algorithms has a logic bug where it treats dropFrameCount_ and mistrustCount_ as frame numbers, not counts of frames (which it is). The implication is that startup convergence and initial settings take one extra frame to apply. Fix this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-16ipa: rpi: Fix segfault when parsing invalid json fileNaushir Patuck
If the json file parsing failed due to a malformed file, the root pointer would be null. This was not tested and caused a segfault when trying to use the pointer to retrieve the version key. Fix this by bailing out early if the parser returns a null pointer. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-16ipa: rpi: agc: Use channel constraints in the AGC algorithmDavid Plowman
Whenever we run Agc::process(), we store the most recent total exposure requested for each channel. With these values we can apply the channel constraints after time-filtering the requested total exposure, but before working out how much digital gain is needed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-16ipa: rpi: agc: Add AgcChannelConstraint classDavid Plowman
A channel constraint is somewhat similar to the upper/lower bound constraints that we use elsewhere, but these constraints apply between multiple AGC channels. For example, it lets you say things like "don't let the channel 1 total exposure be more than 8x that of channel 0", and so on. By using both an upper and lower bound constraint, you could fix one AGC channel always to be a fixed ratio of another. Also read a vector of them (if present) when loading the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-16ipa: rpi: agc: Implementation of multi-channel AGCDavid Plowman
The switchMode, prepare and process methods are updated to implement multi-channel AGC correctly: * switchMode now invokes switchMode on all the channels (whether active or not). * prepare must find what channel the current frame is, and run on behalf of that channel. * process updates the most recent DeviceStatus and statistics for the channel of the frame that has just arrived, but generates updated values working through the active channels in round-robin fashion. One minor detail in process is that we don't want to change the DeviceStatus metadata of the current frame, so we now pass this to the AgcChannel's process method, rather than letting it find the DeviceStatus in the metadata. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-16ipa: rpi: agc: Reorganise code for multi-channel AGCDavid Plowman
This commit does the basic reorganisation of the code in order to implement multi-channel AGC. The main changes are: * The previous Agc class (in agc.cpp) has become the AgcChannel class in (agc_channel.cpp). * A new Agc class is introduced which is a wrapper round a number of AgcChannels. * The basic plumbing from ipa_base.cpp to Agc is updated to include a channel number. All the existing controls are hardwired to talk directly to channel 0. There are a couple of limitations which we expect to apply to multi-channel AGC. We're not allowing different frame durations to be applied to the channels, nor are we allowing separate metering modes. To be fair, supporting these things is not impossible, but there are reasons why it may be tricky so they remain "TBD" for now. This patch only includes the basic reorganisation and plumbing. It does not yet update the important methods (switchMode, prepare and process) to implement multi-channel AGC properly. This will appear in a subsequent commit. For now, these functions are hard-coded just to use channel 0, thereby preserving the existing behaviour. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-16ipa: rpi: histogram: Add interBinMean()Naushir Patuck
Add a new helper function Histogram::interBinMean() that essentially replaces the existing Histogram::interQuantileMean() logic but working on bins instead. Rework the interQuantileMean() to call into interBinMean() with the appropriate convertion from quatiles to bins. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-09-04ipa: rpi: vc4: Make the StatisticsPtr construction clearerDavid Plowman
StatisticsPtr is a shared pointer, so the use of std::make_unique to create it was a bit confusing. Use std::make_shared instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-04ipa: rpi: agc: Split AgcStatus into AgcStatus and AgcPrepareStatusDavid Plowman
The Agc::process() function returns an AgcStatus object in the metadata as before, but Agc::prepare() is changed to return the values it computes in a separate AgcPrepareStatus object (under the new tag "agc.prepare_status"). The "digitalGain" and "locked" fields are moved from AgcStatus to AgcPrepareStatus. This will be useful going forward as we can be more flexible about the order in which prepare() and process() are called, without them trampling on each other's results. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-04ipa: rpi: agc: Filter exposures before dealing with digital gainDavid Plowman
We now time-filter the exposure before sorting out how much digital gain is required. This is actually a little more natural and simplifies the code. It also prepares us for some future work where this arrangement will be helpful. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrpyi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-04ipa: rpi: agc: Fetch AWB status in process method, not prepareDavid Plowman
prepare() doesn't use the AWB status, so fetching it in process() is probably better. This change is preparatory to other changes, where we may find ourselves calling process() without having called prepare() previously. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-08-29ipa: rpi: imx290: Hide one frame on startupNaushir Patuck
The imx290 produces a single unusable frame on startup and mode switch. This is signalled to the IPA in the mode switch case, but not the startup case. Fix this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-07-28ipa: rpi: Fix the reporting of Focus FoMsDavid Plowman
The FocusFom metadata was no longer being reported back because the "focus.status" metadata was never being created. Additionally, the scaling of the focus FoMs was over-zealous, rounding just about everything down to zero. Fixes: ac7511dc4c59 ("ipa: raspberrypi: Generalise the focus reporting code") Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-07-28ipa: rpi: vc4: data: Updated color matrices for RPi CamerasBen Benson
Altered the color matrices for the tuning files for various cameras in order to make them more color accurate. Signed-off-by: Ben Benson <ben.benson@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
2023-07-25ipa: rpi: common: Handle AEC/AGC flicker controlsDavid Plowman
We handle the flicker modes by passing the correct period to the AEC/AGC algorithm which already contains the necessary code. The "Auto" mode, as well as reporting the detected flicker period via the "AeFlickerDetected" metadata, are unsupported for now. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
2023-07-10ipa: rpi: imx296_mono: Disable all colour shadingNaushir Patuck
Colour shading should be turned off for the mono variant of the IMX296 sensor. To do this, set all the colour gain coefficients to 1. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <daivd.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-10ipa: rpi: imx708: Fix mode switch drop frame countNaushir Patuck
The imx708 must drop a single frame on startup - but only when in HDR mode. Non-HDR modes do not need to drop frames. Fix the logic in hideFramesModeSwitch() which currently unconditionally advertises to drop one frame. Unfortunately there is no clear way to tell if the sensor is in the HDR mode. So for now, look the resolution and framerate to deduce this. Additionally ensure we override hideFramesStartup() and return the same number as hideFramesModeSwitch(). Bug: https://github.com/raspberrypi/libcamera-apps/issues/524 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-19ipa: rpi: agc: Do not switch to a default if a mode is unavailableNaushir Patuck
In commit 0ee9339331c6, a default metering/exposure/constraint mode is used if a control sets a mode that is not listed in the camera tuning file. Setting a default mode may be undesirable in these cases, so instead keep the agc mode unchanged. This also matches the behaviour for other IPA controls where no changes are made in error conditions. Fixes: 0ee9339331c6 ("ipa: rpi: agc: Gracefully handle missing agc modes") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2023-06-07ipa: rpi: agc: Gracefully handle missing agc modesNaushir Patuck
If a metering/exposure/constraint mode is not listed in the sensor tuning file, and a control for the missing mode is set on the agc, we terminate the application with a fatal log message. Instead of this fatal termination, log a warning message and switch to the appropriate default mode so that the application continues running. Bug: https://github.com/raspberrypi/libcamera/issues/59 Bug: https://github.com/ayufan/camera-streamer/issues/67 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-07ipa: rpi: agc: Use std::string instead of char arraysNaushir Patuck
Replace the char array strings in struct AgcStatus with std::string objects. This simplifies the string handling in the source code. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-07ipa: rpi: tunings: Add missing short and long exposure profilesNaushir Patuck
Some sensor tuning files were missing the short and/or long exposure mode profiles. Add the missing items to the relevant files. As a drive-by, rename the "sport" exposure profile to "short" for the IMX290 tuning. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>