summaryrefslogtreecommitdiff
path: root/src/ipa/rkisp1/ipa_context.h
AgeCommit message (Collapse)Author
2024-06-17ipa: rkisp1: agc: Rename maxShutterSpeed to maxFrameDurationLaurent Pinchart
The AGC active state and frame context both contain a variable named maxShutterSpeed. The variable is used to limit the maximum shutter speed when computing the exposure time and gains, but stores the maximum frame duration, not clamped by the sensor's maximum shutter speed. Rename it to maxFrameDuration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: algorithms: Add crosstalk algorithmPaul Elder
Add an algorithm module to the rkisp1 IPA for crosstalk correction. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-14ipa: rkisp1: agc: Plumb mode-selection and frame duration controlsPaul Elder
Plumb controls for setting metering mode, exposure mode, constraint mode, and frame duration limits. Also report them as available controls, as well as in metadata. While at it, add the missing #include for tuple, as a std::tie is used. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-11ipa: rkisp1: Add GammaOutCorrection algorithmStefan Klug
Add a gamma algorithm for the rkisp1. It defaults to a gamma of 2.2 which closely resembles sRGB. No seperate sRGB mode was implemented because the pwl that models the gamma curve is so coarse that there is basically no difference between srgb and gamma=2.2. The default can be overridden within the tuning file or set at runtime using the gamma control. The gamma algorithm is not enabled by default. This will be done in future tuning file updates. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminanceDaniel Scally
Now that we have a AgcMeanLuminance class that centralises our AEGC algorithm, derive the RkISP1's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicities sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-02-23ipa: rkisp1: Store hardware parameters in IPA contextLaurent Pinchart
Versions of the ISP differ in the processing blocks they include, as well as in the implementation of some of those blocks. In particular, they have different numbers of histogram bins oe AE statistics cells. The algorithms take these differences into account by checking the ISP version reported by the driver. These checks are currently scattered in multiple places. Centralize them in the IPARkISP1::init() function, and store the version-dependent hardware parameters in the IPA context, accessible by all algorithms. While at it, drop the IPASessionConfiguration::hw member that stores the revision number, unused by the algorithms. It can be added back laer to the IPAHwSettings structure if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2022-11-25ipa: rkisp1: Add support for manual gain and exposurePaul Elder
Add support for manual gain and exposure in the rkisp1 IPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-11-25ipa: rkisp1: Support raw capture in IPA operationsLaurent Pinchart
The RkISP1 can capture raw frames by bypassing the ISP. In that mode, the ISP will not produce statistics nor consume parameters. Most algorithms will thus be unable to run, with one exception: the AGC will still be able to configure the sensor exposure time and analog gain in manual mode. To prepare for this, add the ability to disable algorithms for the duration of the capture session based on the camera configuration. Individual algorithms report whether they support raw formats at construction time, and the IPA module disables algorithms in configure() based on the stream configurations. Disabled algorithms are skipped during the capture session in the processStatsBuffer() operation. As the ISP doesn't produce statistics, don't try to access the stats buffer. There is no need for similar logic in fillParamsBuffer() as that operation won't be called for raw capture. All algorithms report not supporting raw capture by default. Raw support in AGC will be added separately. The feature is implemented in the RkISP1 module without any support from libipa at this point to avoid designing a generic API based on a single user. This may be changed in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-09ipa: rkisp1: Move shutter speed and analogue gain limits from agc to sensorLaurent Pinchart
The limits for the shutter speed and analogue gain are stored in IPASessionConfiguration::agc. While they're related to the AGC, they are properties of the sensor, and are stored in the session configuration by the IPA module, not the AGC algorithm. Move them to the IPASessionConfiguration::sensor structure where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-24ipa: rkisp1: Fill AGC and AWB metadataLaurent Pinchart
Fill the frame metadata in the AGC and AWB algorithm's prepare() function. Additional metadata for other algorithms will be addressed later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Freeze AWB when means are too smallLaurent Pinchart
When the RGB means are too small, gains and color temperature can't be meaningfully calculated. Freeze the AWB in that case, using the previously calculated values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Store color temperature as an integerLaurent Pinchart
The color temperature doesn't need floating point precision, and is calculated by Awb::estimateCCT() as an unsigned integer. Store it with the same data type in the frame context. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: filter: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: dpf: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: cproc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state and frame context to store data in the right place. The active state stores two distinct categories of information: - The consolidated value of all algorithm controls. Requests passed to the queueRequest() function store values for controls that the application wants to modify for that particular frame, and the queueRequest() function updates the active state with those values. The active state thus contains a consolidated view of the value of all controls handled by the algorithm. - The value of parameters computed by the algorithm when running in auto mode. Algorithms running in auto mode compute new parameters every time statistics buffers are received (either synchronously, or possibly in a background thread). The latest computed value of those parameters is stored in the active state in the process() function. The frame context also stores two categories of information: - The value of the controls to be applied to the frame. These values are typically set in the queueRequest() function, from the consolidated control values stored in the active state. The frame context thus stores values for all controls related to the algorithm, not limited to the controls specified in the corresponding request, but consolidated from all requests that have been queued so far. For controls that can be specified manually or computed by the algorithm depending on the operation mode (such as the colour gains), the control value will be stored in the frame context in queueRequest() only when operating in manual mode. When operating in auto mode, the values are computed by the algorithm and stored in the frame context in prepare(), just before being stored in the ISP parameters buffer. The queueRequest() function can also store ancillary data in the frame context, such as flags to indicate if (and what) control values have changed compared to the previous request. - Status information computed by the algorithm for a frame. For instance, the colour temperature estimated by the algorithm from ISP statistics calculated on a frame is stored in the frame context for that frame in the process() function. The active state and frame context thus both contain identical members for most control values, but store values that have a different meaning. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-09-28ipa: rkisp1: agc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The frame context is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Use frame number passed to Algorithm::prepare()Laurent Pinchart
Now that the Algorithm::prepare() function takes a frame number, we can use it to replace the IPAActiveState::frameCount member. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Convert to use the FCQueueKieran Bingham
Establish a queue of FrameContexts using the new FCQueue and use it to supply the FrameContext to the algorithms. The algorithms on the RKISP1 do not use this yet themselves, but are able to do so after the introduction of this patch. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-09-28ipa: rkisp1: Use base FrameContext classLaurent Pinchart
Inherit from the base FrameContext class in the RkISP1 IPAFrameContext. As the IPAFrameContext is currently unused, this change is a no-op, but it prepares the RkISP1 IPA module for frame context queue support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Rename frameContext to activeStateKieran Bingham
The RkISP1 IPA module creates a single instance of its IPAFrameContext structure, effectively using it more as an active state than a per-frame context. To prepare for the introduction of a real per-frame context, move all the members of the IPAFrameContext structure to a new IPAActiveState structure. The IPAFrameContext becomes effectively unused at runtime, and will be populated back with per-frame data after converting the RkISP1 IPA module to using a frame context queue. The IPAActiveState structure will slowly morph into a different entity as individual algorithm get later ported to the frame context API. While at it, fix a typo in the documentation of the Agc::computeExposure() function that incorrectly refers to the frame context instead of the global context. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-21ipa: rkisp1: Add support of Denoise Pre-Filter controlFlorian Sylvestre
The denoise pre-filter algorithm is a bilateral filter which combines a range filter and a domain filter. The denoise pre-filter is applied before demosaicing. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for LSC algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the lsc struct in IPASessionConfiguration which indicates if the LSC hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for AWB algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the awb struct in IPASessionConfiguration which indicates if the AWB hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-19ipa: rkisp1: Add manual color gainsPaul Elder
Add support for manually controlling the color gains on the rkisp1 IPA. To that end, add and plumb the AwbEnable and ColourGains controls. As per-frame controls aren't supported yet in the rkisp1 IPA, simply apply and perform checks on the controls immediately. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of ColorProcessing controlFlorian Sylvestre
Add ColorProcessing algorithm that is in charge to manage brightness, contrast and saturation controls. These controls are currently based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Filter controlFlorian Sylvestre
Denoise and Sharpness filters will be applied by RkISP1 during the demosaicing step. The denoise filter is responsible for removing noise from the image, while the sharpness filter will enhance its acutance. Add filter algorithm with denoise and sharpness values based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Lens Shading Correction controlFlorian Sylvestre
The Lens Shading Correction algorithm applies multipliers to all pixels to compensate for the lens shading effect. The coefficients are specified in a downscaled table in the YAML tuning file. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Introduce AWBJean-Michel Hautbois
The RkISP1 ISP calculates a mean value for Y, Cr and Cb at each frame. There is a RGB mode which could theoretically give us the values for R, G and B directly, but it seems to be failing right now. Convert those values into R, G and B and estimate the gain to apply in a grey world. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: agc: Add a histogram-based gainJean-Michel Hautbois
As for the IPU3, we can estimate the histogram of the luminance. The RkISP1 can estimate multiple ones, the R, G and B ones, the Y only one and a combination of RGB. The one we are interested by in AGC is the Y histogram. Use the hardware revision to determine the number of bins of the produced histogram. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Use frame counter for the request queuedJean-Michel Hautbois
Introduce a frameCount variable in the IPAFrameContext which increments each time a request is queued. It is reset at configure call, when the camera is started. This will allow the frameCount to be used by other algorithms, without having to keep multiple private frame counters. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-11-29ipa: rkisp1: Introduce AGCJean-Michel Hautbois
Now that we have IPAContext and Algorithm, we can implement a simple AGC based on the IPU3 one. It is very similar, except that there is no histogram used for an inter quantile mean. The RkISP1 is returning a 5x5 array (for V10) of luminance means. Estimating the relative luminance is thus a simple mean of all the blocks already calculated by the ISP. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-29ipa: rkisp1: agc: Introduce HW revision in IPAContextJean-Michel Hautbois
The ISP can use 25 or 81 cells depending on its revision. Remove the cached value in IPARkISP1 and use IPASessionConfiguration to store it and pass it to AGC later. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-29ipa: rkisp1: Introduce IPAContextJean-Michel Hautbois
Before using any algorithm, we want the IPAContext to be ready for those. Introduce the IPAContext following the existing design from IPA::IPU3. Each algorithm will then introduce the needed fields. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>