| Age | Commit message (Collapse) | Author |
|---|
|
Now that we support returning int directly in addition to other output
parameters, improve the configure() function in the raspberrypi IPA
interface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The name vblankDelay is clearer.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For some sensors (e.g. imx477) we need to update the vblanking on the
frame before the exposure. For this reason the GetDelays method must
also return the number of frame delays for the vblanking control.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When running with sensors that had no embedded data, the pipeline handler
would fill a dummy embedded data buffer with gain/exposure values, and
pass this buffer to the IPA together with the bayer buffer. The IPA would
extract these values for use in the controller algorithms.
Rework this logic entirely by having a new RPiCameraData::BayerFrame
queue to replace the existing bayer queue. In addition to storing the
FrameBuffer pointer, this also stores all the controls tracked by
DelayedControls for that frame in a ControlList. This includes include
exposure and gain values. On signalling RPi::IPA_EVENT_SIGNAL_ISP_PREPARE
IPA event, the pipeline handler now passes this ControlList from the
RPiCameraData::BayerFrame queue.
The IPA now extracts the gain and exposure values from the ControlList
instead of using RPiController::MdParserRPi to parse the embedded data
buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the IPA interface namespace to ipa::RPi for consistency with
the libcamera::RPi namespace label.
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit addresses a couple of tidy-ups after the IPAInterface
rework:
- Rename ConfigStaggeredWrite -> ConfigSensorParams
- Rename setIsp -> setIspControls
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A camera tuning is not required to load an SDN algorithm. In keeping
with other controls, do not fail when a particular control was
expecting this algorithm, just warn that it is not present.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove everything related to the C API, including ipa_context,
ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant
documentation.
ipaCreate() provided by IPA implementations, and createInterface()
provided by IPAModule (wrapper around IPA implementation) both now
return a C++ object IPAInterface instead of struct ipa_context.
Although IPAInterfaceWrapper is the only component of libipa, the
skeleton and build files for libipa are retained.
After converting the C API to the C++-only API, make all pipeline
handlers and IPAs use the new API.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
This is a combination of 21 commits:
---
libcamera: IPAModule: Replace ipa_context with IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate_() and createInterface()
return IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: ipa_context_wrapper: Remove ipa_context_wrapper
Since ipa_context has been replaced with custom IPAInterfaces, it is not
longer needed. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: remove ipa_context and functions from documentation
Remove all the documentation related to ipa_context and the C IPA API,
as well as the documentation about the functions in the IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAInterface: Remove all functions from IPAInterface
Now that all the functions in the IPA interface are defined in the data
definition file and a specialized IPAInterface is generated per pipeline
handler, remove all the functions from the base IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: make ipaCreate return IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate return IPAinterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
ipa: remove IPAInterfaceWrapper
As every pipeline has its own proxy, IPAInterfaceWrapper is no
longer necessary. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
libcamera: IPAProxy: Remove stop() override
Since stop() is part of the IPA interface, and the IPA interface is now
generated based on the data definition file per pipeline, this no longer
needs to be overrided by the base IPAProxy. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme
IPAProxy is changed in two major ways:
- Every pipeline has its own proxy, to support each pipeline's IPA
interface
- IPAProxy implementations always encapsulate IPA modules, and switch
internally for isolation or threaded
The IPAProxy registration mechanism is removed, as each pipeline will
have its own proxy, so the pipeline can pass the specialized class name
of the IPAProxy to the IPAManager for construction.
IPAManager is changed accordingly to support these changes:
- createIPA is a template function that takes an IPAProxy class, and
always returns an IPAProxy
- IPAManager no longer decides on isolation, and simply creates an
IPAProxy instance while passing the isolation flag
Consequently, the old IPAProxy classes (IPAProxyThread and
IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use
the new IPAManager interface, and to construct a ProcessManager as no
single global instance is created anymore.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
---
libcamera: IPAProxy: Add isolate parameter to create()
Since IPAProxy implementations now always encapsulate IPA modules, add a
parameter to create() to signal if the proxy should isolate the IPA or not.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline
Now that each pipeline handler has its own IPAProxy implementation, make
the IPAManager fetch the IPAProxy based on the pipeline handler name.
Also, since the IPAProxy is used regardless of isolation or no
isolation, remove the isolation check from the proxy selection.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAManager: add isolation flag to proxy creation
When the IPA proxy is created, it needs to know whether to isolate or
not. Feed the flag at creation of the IPA proxy.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Make createIPA return proxy directly
Since every pipeline knows the type of the proxy that it needs, and
since all IPAs are to be wrapped in a proxy, IPAManager no longer needs
to search in the factory list to fetch the proxy factory to construct a
factory. Instead, we define createIPA as a template function, and the
pipeline handler can declare the proxy type when it calls createIPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy: Remove registration mechanism
Implementations of IPA proxies use a registration mechanism to register
themselves with the main IPA proxy factory. This registration declares
static objects, causing a risk of things being constructed before the
proper libcamera facilities are ready. Since each pipeline handler has
its own IPA proxy and knows the type, it isn't necessary to have a proxy
factory. Remove it to alleviate the risk of early construction.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread
We have now changed the proxy from per-IPC mechanism to per-pipeline.
The per-IPC mechanism proxies are thus no longer needed; remove them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
tests: ipa_interface_test: Update to use new createIPA
Update the IPA interface test to use the new createIPA function from
IPAManager. Also create an instance of ProcessManager, as no single
global instance is created automatically anymore. Update meson.build to
to depend on the generated IPA interface headers.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: PipelineHandler: Remove IPA from base class
Since pipeline handlers now have their own IPA interface types, it can no
longer be defined in the base class, and each pipeline handler
implementation must declare it and its type themselves. Remove it from
the base class.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
ipa: raspberrypi: Add mojom data definition file
Add a mojom data definition for raspberrypi pipeline handler's IPAs.
This simplifies the API between the raspberrypi pipeline handler and the
IPA, and is not a direct translation of what was used before with
IPAOperationData.
Also move the enums from raspberrypi.h to raspberrypi.mojom
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: raspberrypi: Use new data definition
Now that we can generate custom functions and data structures with mojo,
switch the raspberrypi pipeline handler and IPA to use the custom data
structures as defined in the mojom data definition file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: vimc: Support the new IPC mechanism
Add support to vimc pipeline handler and IPA for the new IPC mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
---
libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism
Add support to the rkisp1 pipeline handler and IPA for the new IPC
mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism
Add support to ipu3 pipeline handler and IPA for the new IPC mechanism.
[Original version]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Fixed commit message and small changes]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The application provided noise reduction mode gets passed into the
denoise controller. The denoise controller in turn returns the mode to
the IPA which now sets up the colour denoise processing appropriately.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change is in anticipation of the addition of a DenoiseAlgorithm
base class which the SDN class will derive from. We want to match the
metadata object name with the base class algorithm name.
This renames:
- SdnStatus metadata object to DenoiseStatus
- "sdn.status" metadata string key to "denoise.status"
- sdn_status.h header file to denoise_status.h
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to provide an optimal split between shutter speed and gain, the
AGC must know the maximum allowable shutter speed, as limited by the
maximum frame duration (either application provided or the default).
Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The
IPA provides the maximum shutter speed for AGC calculations. This
applies to both the manual and auto AGC modes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The existing framerate/vblank calculations did not account for the
sensor mode limits. This commit extracts vblank limits from the sensor
v4l2 controls, and stores it in the camera modes structure.
Exposure and vblank value calculations now use values clamped to the
sensor mode limits. The libcamera::controls::FrameDurations metadata
return values now reflect the minimum and maximum after clamping.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the enum values to indicate pipeline handler -> IPA actions
(IPA_CONFIG_*) and IPA -> pipeline handler return results (IPA_RESULT_*).
Additionally, provide more descriptive names for these values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Users are free to avoid loading certain control algorithms from the
json tuning file if they wish, and this could mean that some libcamera
controls will therefore not be available. Currently we don't have a
good means of indicating which these are, therefore failing completely
when an application tries to use one is unhelpful - it is better just
to issue a warning.
Note that once we can indicate this properly, applications should
check for supported controls as this change may be reverted.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the libcamera core helper DelayedControls instead of the local
StaggeredCtrl. The new helper is modeled after the StaggeredCtrl
implementation and behaves the same.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for setting V4L2_CID_VBLANK appropriately when setting
V4L2_CID_EXPOSURE. This will allow adaptive framerates during
viewfinder use cases (e.g. when the exposure time goes above 33ms, we
can reduce the framerate to lower than 30fps).
The minimum and maximum frame durations are provided via libcamera
controls, and will prioritise exposure time limits over any AGC request.
V4L2_CID_VBLANK is controlled through the staggered writer, just like
the exposure and gain controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The digital gain reported by the AGC algorithm is reported in the
metadata that is included in completed requests.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no need to validate all the ISP and sensor V4L2 control on
every use. Simply validate them once during the IPA configuration, and
fail if a required control is not available.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
These specific controls are part of the sensor device, so rename them
appropriately.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
C++17 has a std::size() function that returns the size of a C-style
array. Use it instead of the custom ARRAY_SIZE macro.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Previously the CamHelper was returning the number of frames to drop
(on account of AGC/AWB converging). This wasn't really appropriate,
it's better for the algorithms to do it as they know how many frames
they might need.
The CamHelper::HideFramesStartup method should now just be returning
the number of frames to hide because they're bad/invalid in some way,
not worrying about the AGC/AWB. For many sensors, the correct value
for this is zero. But the ov5647 needs updating as it must return 2.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
configure
The number of frames to drop (not display) is passed back now from the
start method, not configure. This means applications have a chance to
set fixed exposure/gain before starting the camera and this can affect
the frame drop count that is returned.
Note how we need to be able to tell the very first time we start the
camera from subsequent restarts, hence addition of the "firstStart_"
flag.
Both the IPA implementation file and the pipeline handler need
matching modifications.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Forward any controls passed into the pipeline handler to the IPA.
The IPA then sets up the Raspberry Pi controller with these settings
appropriately, and passes back any V4L2 sensor controls that need
to be applied.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change allows controls passed into PipelineHandler::start to be
forwarded onto IPAInterface::start(). We also add a return channel if the
pipeline handler must action any of these controls, e.g. setting the
analogue gain or shutter speed in the sensor device.
The IPA interface wrapper isn't addressed as it will soon be replaced by
a new mechanism to handle IPC.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the IPA fails during configuration, return an error flag to the
pipeline handler and fail the use case gracefully.
At present, the IPA configuration can fail for the following reasons:
- The sensor is not recognised, and fails to open a CamHelper object.
- The pipeline handler did not pass in controls for the ISP and sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
AE/AGC "disabled" is now handled better by the algorithm for itself,
so it no longer needs to be "resumed" before setting fixed shutter or
gain values.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Support the 'cloudy' AWB mode which was left out when the AwbModeTable
was introduced.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of directly mmaping/unmapping buffers passed to the IPA, use
a MappedFrameBuffer. The latter is a cleaner interface, and avoid
code duplication.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
During configure() we update the ScalerCropMaximum to the correct
value for this camera mode and work out the minimum crop size allowed
by the ISP.
Whenever a new ScalerCrop request is received we check it's valid and
apply it to the ISP V4L2 device. When the IPA returns its metadata to
us we add the ScalerCrop information, rescaled to sensor native
pixels.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is the unnecessary semicolon after ipaCreate() in
raspberrypi.cpp. This removes it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
I presume this code is supposed to set bin_x and bin_y, and not bin_y
two times. This caused use of uninitialized variable later when bin_x
was used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change variable names to camel case to be consistent with the rest of
the source files. Remove #define consts and replace with constexpr.
Add some newlines to make the code more readable.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts resolved]
[Kieran: Fix checkstyle line under 80 chars]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All IPA related types/params are now moved to the RPi namespace.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts fixed]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This avoids a namespace clash with the RPi namespace used by the ipa and
pipeline handlers, and cleans up the syntax slightly.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit plumbs the user transform from the Raspberry Pi pipeline
handler through to the IPA. Note that the transform is actually
handled in the sensor (by setting the h/v flip bits), so the IPAs need
to understand the orientation of the image they receive.
Once in the IPA we add it to the CameraMode description, so that it
becomes automatically available to all the individual control
algorithms.
The IPA configure method has to be reordered just a little so as to
fill in the transform in the camera mode before calling SwitchMode.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the case where a FrameBuffer that has been externally allocated
(i.e. not through the v4l2 video device) is passed into a Request.
We must store the buffer pointer in the stream internal buffer list to
identify when used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA now signals up front how many frames it wants the pipeline
handler to drop. This makes it easier to handle up-coming changes to the
buffer handling for import/export buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
We build libcamera with -Wno-unused-parameter and this doesn't cause
much issue internally. However, it prevents catching unused parameters
in inline functions defined in public headers. This can lead to
compilation warnings for applications compiled without
-Wno-unused-parameter.
To catch those issues, remove -Wno-unused-parameter and fix all the
related warnings with [[maybe_unused]].
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Implements, for the Raspberry Pi platform, the returning of the CCM
(Colour Correction Matrix) used by the pipeline in the libcamera
metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove use of vcsm allocations and replace with dma heap allocations.
The pipeline handler now passes the fd of the allocation over to the IPA
instead of the raw pointer.
Also use libcamera::FileDescriptor for fd lifetime management.
This commit must be built alongside the accompanying BCM2835 ISP kernel
driver changes at https://github.com/raspberrypi/linux/pull/3715.
Otherwise a mismatch will cause undefined behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG
frame action to send the sensor staggered write configuration to the
pipeline handler when the IPA is configured. Replace this ad-hoc
mechanism by passing the corresponding data back from the IPA to the
pipeline handler through the configure() response. This allows
synchronous handling of the response on the pipeline handler side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The IPAInterface::configure() function now accepts custom configuration
data. Use it to pass the lens shading table instead of using a custom
IPA event. This will allow starting the IPA when starting the camera,
instead of pre-starting it early in order to process the lens shading
table allocation event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The camera sensor orientation is now handled by the pipeline handler.
Drop hardcoded per-sensor orientations from the IPA.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Switch FocusStatus::num to unsigned int for convenience.
Fill in libcamera::controls::FocusFoM with the average of the middle two
regions (across a 4x3 grid) FoM statistics from the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For control algorithms like focus, this is needed to return out the
the current frame focus statistics. For other algorithms, there is no
functional change.
Signed-off-By: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This simply wires up the libcamera sharpness control in the Raspberry
Pi IPAs so that it controls the strength of the Raspberry Pi sharpness
control algorithm.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
mode changes
This commit causes the AGC to recalculate its camera exposure/gain
values when the camera mode changes. For example it's possible
that the exposure profile could be changed by the application so
the division between exposure time and analogue gain may be
different.
The other underlying reason (and which this commit accomplishes too)
is that the sensor's line timing may change in a new mode, and because
V4L2 drivers store a number of exposure _lines_, the resulting _time_
will "change under our feet". So we have to go through the process of
recalculating the correct number of lines and writing this back to the
sensor with every mode switch, regardless of anything else.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit adds a Metadata parameter to the SwitchMode method
enabling it to return camera and other settings to the caller
(usually the configure method, just after the camera mode has been
selected).
In future this will allow the Raspberry Pi IPAs to take those settings
(such as exposure and analogue gain) and program them directly into
the camera or ISP before the camera is even started.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA headers are installed into $prefix/include/libcamera/ipa/, but
are located in the source tree in include/ipa/. This requires files
within libcamera to include them with
#include <ipa/foo.h>
while a third party IPA would need to use
#include <libcamera/ipa/foo.h>
Not only is this inconsistent, it can create issues later if IPA headers
need to include each other, as the first form of include directive
wouldn't be valid once the headers are installed.
Fix the problem by moving the IPA headers to include/libcamera/ipa/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
