summaryrefslogtreecommitdiff
path: root/src/ipa/ipu3
AgeCommit message (Collapse)Author
2022-04-09ipa: ipu3: af: Move constants to implementationKieran Bingham
A selection of constants are imported from ChromiumOS. Move these out of the header, and simplify their documentation. Further more, add a direct reference to the location they were obtained from. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: enforce grid size restrictionsKieran Bingham
Provide enforcement of the selection of the block_{width,height}_log2 parameters to the capabilities of the hardware. While this selection is currently hardcoded to the minimum, providing the restriction now allows for further dynamic sizing in the future and documents the restrictions directly in code, making use of the already existing constants. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-04-08ipa: ipu3: Inline parseStatistics() into processStatsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Inline fillParams() in fillParamsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Replace event-based ops with dedicated functionsUmang Jain
The IPAIPU3 interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of actions to signals are: ActionSetSensorControls => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadataReady => metadataReady The translated naming scheme of events to dedicated functions are: EventProcessControls => queueRequest() EventStatReady => processStatsBuffer() EventFillParams => fillParamsBuffer() The dedicated functions are called from pipeline-handler to the IPA using IPC. These functions run asynchronously and when completed, the IPA emits the respective signals as stated above in the translated naming scheme. The EventProcessControls is translated to queueRequest() to bring symmetry to the IPU3 interface with other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-28ipa: ipu3: Ensure controls exists in before they are queriedUmang Jain
Add a validation check for sensor controls validateSensorControls() before they are queried in IPAIPU3::updateSessionConfiguration(). Fail the IPAIPU3::configure() if the required sensor controls are not found. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Drop sensor controls private members from IPAIPU3Umang Jain
Drop exposure, gain private members from IPAIPU3 because the values are handled directly via IPAFrameContext. Move the default vblank value from IPAIPU3 to IPASessionConfiguration structure as it is a default static value not expected to change for a session. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Consolidate querying of exposure and gain limitsUmang Jain
The exposure and gain limits are required for AGC configuration handled in IPAIPU3::updateSessionConfiguration(), which is happening already. Therefore the max/min private members in IPAIPU3 class for exposure/gain serve no use except setting initial values of exposure_ and gain_ members. Drop the max/min private members from IPAIPU3 class and set initial gain_ and exposure_ in IPAIPU3::updateSessionConfiguration(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Use existing local short-hand variable in configure()Laurent Pinchart
The configure() function has a local configuration variable referencing context.configuration for the purpose of shortening lines. Use it instead of context.configuration in the remaining locations, and constify it while at it as the configuration isn't meant to be modified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Reset frame count when configuring AGCLaurent Pinchart
The frame count is used to skip the gain and exposure filtering when starting. It thus needs to be reset when configuring the algorithm, to avoid slower convergence when stopping and restarting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: Send lens controls to pipeline handlerDaniel Scally
Pick up the focus value from the AF algorithm and send lens controls along in the frame context. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Rename ctrls_ memberDaniel Scally
Now that we have added lens controls, rename the existiing member of the class to clarify that it relates to the sensor's controls. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Add lens control member to ipu3 ipa interfaceDaniel Scally
Add further members to the ipu3 ipa interface that will hold lens controls passed in by configInfo Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: af: Auto focus for dw9719 Surface Go2 VCMKate Hsuan
Since VCM for surface Go 2 (dw9719) had been successfully driven, this Af module can be used to control the VCM and determine the focus value based on the IPU3 AF state. Based on the values from the IPU3 AF buffer, the variance of each focus step is determined and a greedy approach is used to find the maximum variance of the AF state and an appropriate focus value. The grid configuration is implemented as a context. Also, the grid parameter- AF_MIN_BLOCK_WIDTH is set to 4 (default is 3) since if the default value is used, x_start (x_start > 640) will be at an incorrect location of the image (rightmost of the sensor). Signed-off-by: Kate Hsuan <hpa@redhat.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-11ipa: ipu3: awb: Clamp gain valuesJean-Michel Hautbois
The gain values are coded as u3.13 fixed point values, ie they can not be more than 8. Clamp the values in order to avoid any off limits value which could make the IPU3 behave in a weird manner. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: agc: Introduce lineDuration in IPASessionConfigurationJean-Michel Hautbois
Instead of having a local cached value for line duration, store it in the IPASessionConfiguration::sensor structure. While at it, configure the default analogue gain and shutter speed to controlled fixed values. The latter is set to be 10ms as it will in most cases be close to the one needed, making the AGC faster to converge. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: Shorten exposure and gain linesJean-Michel Hautbois
When the effective sensor values are stored during the EventStatReady event, the lines are long. Fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: Return filtered valueJean-Michel Hautbois
When the current exposure value is calculated, it is cached and used by filterExposure(). Use private filteredExposure_ and pass currentExposure as a parameter. In order to limit the use of filteredExposure_, return the value from filterExposure(). While at it, remove a stale comment. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-12-07libcamera: Use utils::abs_diff()Laurent Pinchart
Use the new utils::abs_diff() function where appropriate to replace manual implementations. While at it fix a header ordering issue in src/libcamera/pipeline/raspberrypi/raspberrypi.cpp. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-30ipa: ipu3: Rectify gain value reporting in request metadataUmang Jain
Report value of sensor's gain pertaining to the current request completion, as that is the gain value the request completed with. The Agc algorithm processes the gain value for incoming next request hence it should not be reported in request's metadata. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-29ipa: libipa: Introduce Algorithm class templateJean-Michel Hautbois
The algorithms are using the same function names with specialized parameters. Instead of duplicating code, introduce a libipa Algorithm class which implements a base class with template parameters in libipa, and use it in each IPA. As we now won't need an algorithm class for each IPA, move the documentation to libipa, and make it agnostic of the IPA used. While at it, fix the IPU3::Algorithm::Awb documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-29ipa: Do not modify the sensor limitsJean-Michel Hautbois
The driver is responsible for setting the proper limits for its controls. The IMX219 has an analogue gain of 1.0 when the gain code is set to 0, therefore we can not clamp to a minimum gain code of 1. Rework this for both IPU3 and RkISP1, for both Exposure and Gain controls. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-24ipa: ipu3: Convert to pragma onceKieran Bingham
Remove the verbose #ifndef/#define/#endif pattern for maintaining header idempotency, and replace it with a simple #pragma once. This simplifies the headers, and prevents redundant changes when header files get moved. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-11-23ipa: ipu3: Fix IPAContext documentationJean-Michel Hautbois
The shutter speed limits and analogue gains limits are in the agc structure in IPASessionConfiguration. They are badly mentioned as being part of the grid structure, fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Saturate the averages when computing relative luminanceLaurent Pinchart
The relative luminance is calculated using an iterative process to account for saturation in the sensor, as multiplying pixels by a gain doesn't increase the relative luminance by the same factor if some regions are saturated. Relative luminance estimation doesn't apply a saturation, which produces a value that doesn't match what the sensor will output, and defeats the point of the iterative process. Fix it. Fixes: f8f07f9468c6 ("ipa: ipu3: agc: Improve gain calculation") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Return the inter-quantile mean from measureBrightness()Laurent Pinchart
The inter-quantile mean is a value that is computed as part of the AGC run. It doesn't need to be stored in a member variable. Return it from measureBrightness(), which makes the flow of data easier to follow. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Rename currentYGainLaurent Pinchart
The "current" prefix in the currentYGain variable name is confusing: - In Agc::estimateLuminance(), the variable contains the gain to be applied to the image, which is neither a "current" gain nor a "Y" gain. Rename it to "gain". - In Agc::computeExposure(), the variable contains the gain computed by the relative luminance method, so rename it to "yGain". While at it, rename variables to match the libcamera coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Standardize vocabulary on "relative luminance"Laurent Pinchart
The AGC computes the average relative luminance of the frame and calls the value "normalized luma", "brightness" or "initialY". The latter is the most accurate term, as the relative luminance is abbreviated Y, but the "initial" prefix isn't accurate. Standardize the vocabulary on "relative luminance" in code and comments, abbreviating it to Y when needed. While at it, rename variables to match the libcamera coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Drop kMaxLuminance constantLaurent Pinchart
The kMaxLuminance constant is badly named, it's not a maximum luminance, but the maximum integer value output by the AWB statistics engine for per-channel averages. The constant is used in a single place, hardcoding the value is actually more readable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-16ipa: ipu3: agc: Remove the threshold for the histogram calculationJean-Michel Hautbois
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation) the gain to apply on the exposure value was only using the histogram. Now that the global brightness of the frame is estimated too, we don't need to remove part of the saturated pixels from the equation anymore. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-15ipa: ipu3: Set the AnalogueGain controlJean-Michel Hautbois
We can report the controls::AnalogueGain metadata now that AGC is updating it correctly. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Move ExposureTime to IPAJean-Michel Hautbois
Now that we have the exposure time calculated, report it in the controls::ExposureTime and don't use the pipeline handler for it anymore. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Cache line duration at configure callJean-Michel Hautbois
We use the line duration several times in the IPAIPU3. Instead of recalculating it each time, cache the value as a utils::Duration. ExposureTime and FrameDuration units are in micro-seconds, cast the Duration accordingly. As sensorInfo is no longer used in updateSessionConfiguration remove the reference to it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Send color temperature in the metadataJean-Michel Hautbois
Now that the color temperature is updated per-frame, use the value and set the corresponding controls::ColourTemperature. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: awb: Add support for color temperatureJean-Michel Hautbois
The AWB estimates the color temperature, but it is not used at all. It can be useful for debug purpose at least, but also for lux estimation later, to be able to know the temperature estimated for a given frame. Add a new member to the IPAFrameContext::awb for this purpose, and update the value in AWB. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Store exposure in units of timeJean-Michel Hautbois
The minimum and maximum exposure are stored in lines. Replace it by values in time to simplify the calculations. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Update previous exposure valueJean-Michel Hautbois
Previously, the exposure value was calculated based on the estimated shutter time and gain applied. Now that we have the real values for the current frame, use those before estimating the next one and rename the variable accordingly. As the exposure value is updated in the beginning of the computation, there is no need to initialize effectiveExposureValue anymore in the configure call, and it can be a local variable and not a class variable anymore. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Improve gain calculationJean-Michel Hautbois
When an image is partially saturated, its brightness is not increasing linearly when the shutter time or gain increases. It is a big issue with a backlight as the algorithm is fading to darkness right now. Introduce a function to estimate the brightness of the frame, based on the current exposure/gain and loop on it several times to estimate it again and approach the non linear function. Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images") Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Refactor ev gain calculation and testingJean-Michel Hautbois
When we compute the new gain, we use the iqMean_ and estimate an exposure value gain to apply. Return early when the gain is less than 1%. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Compute the gain for each frameJean-Michel Hautbois
Now that we have the real exposure applied at each frame, remove the early return based on a frame counter and compute the gain for each frame. Introduce a number of startup frames during which the filter speed is 1.0, meaning we apply instantly the exposure value calculated and not a slower filtered one. This is used to have a faster convergence, and those frames may be dropped in a future development to hide the convergance process from the viewer. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Limit the number of saturated cellsJean-Michel Hautbois
When the histogram is calculated, we check if a cell is saturated or not before cumulating its green value. This is wrong, and it can lead to an empty histogram in case of a fully saturated frame. Use a constant to limit the amount of pixels within a cell before considering it saturated. If at the end of the loop we still have an empty histogram, then make it a fully saturated one. Bug: https://bugs.libcamera.org/show_bug.cgi?id=84 Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Use sensor controls to update frameContextJean-Michel Hautbois
The pipeline handler populates the new sensorControls ControlList, to have the effective exposure and gain values for the current frame. This is done when a statistics buffer is received. Make those values the frameContext::sensor values for the frame when the EventStatReady event is received. AGC also needs to use frameContext.sensor as its input values and frameContext.agc as its output values. Modify computeExposure by passing it the frameContext instead of individual exposure and gain values. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Extend ipu3 ipa interface for sensor controlsHan-Lin Chen
IPU3Event and IPU3Action use single ControlList for both libcamera and V4L2 controls, and it's content could be either one based on the context. Extend IPU3Event and IPU3Action for sensor V4L2 controls, and preserve the original one for only libcamera Controls to make the content of an event more specific. Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> [Jean-Michel: remove lensControls from the original patch] Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-06ipa: ipu3: List the events in their order of callingJean-Michel Hautbois
The IPU3 IPA has three events which are handled from the pipeline handler. The events are received in the sequence, EventProcessControls, EventFillParams, and finally EventStatReady, while the code lists these in a different order. Update the flow of IPAIPU3::processEvent() to match the expected sequence of events, to help support the reader in interpreting the flow of events through the IPA. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-10-26ipa: ipu3: agc: Clamp shutter speedJean-Michel Hautbois
In case the maximum exposure received from the sensor is very high, we can have a very high shutter speed with a small analogue gain, and it may result in very slow framerate. We are not really supporting it for the moment, so clamp the shutter speed to an arbitrary value of 60ms. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: ipa_context: Fix doxygen warningsKieran Bingham
The IPAFrameContext uses unnamed structures to group items. Doxygen doesn't seem to support this properly, documentation isn't properly generated and warnings are output during compilation. Suppress the warning with a workaround that still results in incorrect generated documentation until Doxygen gets fixed. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [JMH: Fix doxygen variable usage] Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: Implement an empty stop() functionJean-Michel Hautbois
While the stop() function does not currently perform any action, it forms part of the IPA interface and is a public function in the class. Promote it to a full (but basic) function implementation and begin the documentation accordingly so that there is an appropriate stub to perform stop operations if they come up. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-26ipa: ipu3: Fix badly documented context variablesJean-Michel Hautbois
Doxygen warns us because the structures are referenced as \struct while they should be \var. Fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: Isolate ipa_context documentationKieran Bingham
The IPU3 IPA core is growing with additional documentation. The ipa_context documentation is stored here, but it pushes the IPU3 documentation and implementation further from the head of the file. Furthermore, the ipa_context documentation is outside of the ipa::ipu3 namespace and isn't identified correctly by Doxygen. Move the ipa_context to its own compilation object even though there isn't any code, but to maintain consistency with our documentation model. Correctly re-introduce the documentation into the libcamera::ipa::ipu3 namespace during the move. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-10-26ipa: ipu3: algorithms: awb: Privatize internal structuresKieran Bingham
The struct RGB and struct AwbStatus are used only by the internal implementation of the AWB algorithm module. Move them into the private class declaration. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>