summaryrefslogtreecommitdiff
path: root/src/gstreamer
AgeCommit message (Collapse)Author
2021-08-26gstreamer: Fix concurrent access issues to CameraManagerNicolas Dufresne
It's not allowed to have multiple instances of CameraManager. This requirement is not easy for GStreamer were the device monitor and the camerasrc, or two camerasrc instances don't usually have any interaction between each other. Fix this by implementing a minimalist singleton around CameraManager constructor and start()/stop() operations. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-26gstreamer: Fix deadlock when last allocator ref is held by bufferNicolas Dufresne
This deadlock occurs when a buffer is holding the last reference on the allocator. In gst_libcamera_allocator_release() we must drop the object lock before dropping the last ref of that object since the destructor will lock it again causing deadlock. This was notice while switching camera or resolution in Cheese software. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-05gstreamer: Update format specifier in Request Pad templateVedant Paranjape
Change format specifier %s to %u in name template field of request pad template. Pad names are as follows, src_0, src_1, etc. So, instead of using string format specifier, use unsigned integer format specifier. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-07-28gstreamer: Store group_id in GstLibcameraSrcStateVedant Paranjape
This patch adds group_id in GstLibcameraSrcState, since group_id is something which should be same for all the pads, it can be reused later. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-06-25libcamera: rename public libcamera dependencyKieran Bingham
Now that we have a libcamera_private, make the public only dependency libcamera_public so that it is clear which interface is being linked. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25gstreamer: Added virtual functions needed to support request padsVedant Paranjape
This patch adds support for using request pads in libcamerasrc Gst Element. It allows a user to request multiple streams if the platform supports multistream output using libcamera. This was tested on Raspberry Pi 4B+ with a camera connected to CSI port. It can be tested by running the following command gst-launch-1.0 libcamerasrc camera-name="<camera-name-here>" name=src src.src ! queue ! videoconvert ! autovideosink src.src_0 ! queue ! videoconvert ! autovideosink Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-06-07gstreamer: Add error checking in gst_libcamera_src_task_enter()Vedant Paranjape
The return value from generateConfiguration() was not checked. Only assert was added as a guard which checked if the size of the generated camera config was equal to size of roles passed to it. If the roles variable has an invalid/unsupported role, it will return a nullptr and then trying to access a member on a nullptr for size comparison will result in a segmentation fault. So, if the function returns a nullptr, simply push an error message on GstBus and gracefully exit. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-05-31gst: Fix compilation warning with GLib >= 2.62Laurent Pinchart
GLib 2.62 has deprecated g_memdup(), which is used inline in GStreamer's gstbytereader.h header. This results in a compilation warning: In file included from /usr/include/gstreamer-1.0/gst/base/base.h:35, from ../../src/gstreamer/gstlibcamerasrc.cpp:39: /usr/include/gstreamer-1.0/gst/base/gstbytereader.h: In function ‘guint8* gst_byte_reader_dup_data_unchecked(GstByteReader*, guint)’: /usr/include/gstreamer-1.0/gst/base/gstbytereader.h:365:41: error: ‘void* g_memdup(gconstpointer, guint)’ is deprecated: Use 'g_memdup2' instead [-Werror=deprecated-declarations] 365 | return (guint8 *) g_memdup (data, size); GLib has a mechanism to silence warnings introduced in newer versions, to allow compilation without warnings on multiple versions of the library. This is done by setting the GLIB_VERSION_MIN_REQUIRED macro to the minimum GLib version required. As we depend on GStreamer >= 1.14, set the minimum GLib version to 2.40. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2021-03-28meson: Summarize which applications and adaptation layers are builtLaurent Pinchart
Add the application and adaptation layers being built to the meson summary. The summary now prints libcamera 0.0.0 Configuration Enabled pipelines: ipu3 raspberrypi rkisp1 simple uvcvideo vimc Android support: True GStreamer support: True V4L2 emulation support: True cam application: True qcam application: True Unit tests: True Subprojects libyuv: YES Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-03-23meson: Use subdir_done() to reduce indentationLaurent Pinchart
Reduce the indentation in the gstreamer and qcam meson.build with subdir_done(). This follows similar patterns in cam and v4l2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-15gst: Use the streams of CameraConfiguration when allocating buffersDafna Hirschfeld
Currently, when allocating buffers, the streams of the Camera object are used. Instead the streams of the CameraConfiguration object should be used. This is because the Camera object holds all available streams while the CameraConfiguration holds only the streams associated with the current configuration. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-12libcamera: gst: Fix double-free when acquire_buffer failsMarian Cichy
If gst_buffer_pool_acquire_buffer in gst_libcamera_task_run fails, the unique_ptr to the request-object gets reset and hence, its destructor is called. However, the wrap-object points to the same object and is still alive at this moment. When the task_run-function is finished, the destructor of the wrap-object is called, which in return calls the destructor of the request-object again. Instead of taking care of both, the request and the wrap-object, we can move the request to the wrap which will then effectively take care of the request object automatically. Signed-off-by: Marian Cichy <m.cichy@pengutronix.de> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2021-03-12gst: pool: Fix GstBuffer leak on errorNicolas Dufresne
We borrowed a GstBuffer from the pool, if preparing the buffer failed, we need to push it back to avoid leaking it. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-12gst: provider: Fix crash in finalizeNicolas Dufresne
Both the DeviceProvider and Device classes had the same mistake, calling G_OBJECT_GET_CLASS() instead of G_OBJECT_CLASS() when chaining their finalize call to their base class. This would crash at destruction, which was causing gst-device-monitor-1.0 tool to crash and application using that API to crash too. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-11meson: Fix coding style when declaring arraysLaurent Pinchart
The meson.build files mix array declarations with and without a space after the opening and before the closing square bracket. The vast majority of cases don't use spaces, so standardize on that. While it it, fix indentation in a few places. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-07gstreamer: libcamerasrc: Delete configuration before stopping camera managerLaurent Pinchart
When closing the libcamerasrc, the reference to camera is released and the camera manager is stopped. However, the camera configuration still exists at that point, and holds a reference to the camera. This leads to a warning from the device enumerator complaining that the media devices are still in use: [1:53:48.792327560] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media1 while still in use [1:53:48.792354022] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media0 while still in use A crash follows when the libcamerasrc is finalized, as deleting the camera configuration will then release the last reference to the camera, which attempts to delete the camera object with deleteLater() without an event dispatcher. Fix it by deleting the camera configuration before stopping the camera manager. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2020-10-20gstreamer: Omit extra semicolonsHirokazu Honda
Macros used in gstreamer (e.g. G_DEFINE_TYPE) are functions. The end semicolons with the macros are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-12libcamera, android, cam, gstreamer, qcam, v4l2: Reuse RequestPaul Elder
Allow reuse of the Request object by implementing reuse(). This means the applications now have the responsibility of freeing the Request objects, so make all libcamera users (cam, qcam, v4l2-compat, gstreamer, android) do so. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-25meson: Remove -Wno-unused-parameterLaurent Pinchart
We build libcamera with -Wno-unused-parameter and this doesn't cause much issue internally. However, it prevents catching unused parameters in inline functions defined in public headers. This can lead to compilation warnings for applications compiled without -Wno-unused-parameter. To catch those issues, remove -Wno-unused-parameter and fix all the related warnings with [[maybe_unused]]. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-08-25libcamera: Remove void specifier for functions that take no argumentsLaurent Pinchart
In C++, unlike in C, a function that takes no argument doesn't need to specify void in the arguments list. Drop the unnecessary specifiers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-08-05libcamera: camera: Rename name() to id()Niklas Söderlund
Rename Camera::name() to camera::id() to better describe what it represents, a unique and stable ID for the camera. While at it improve the documentation for the camera ID to describe it needs to be stable for a camera between resets of the system. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-18gst: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-13licenses: License all meson files under CC0-1.0Laurent Pinchart
In an attempt to clarify the license terms of all files in the libcamera project, the build system files deserve particular attention. While they describe how the binaries are created, they are not themselves transformed into any part of binary distributions of the software, and thus don't influence the copyright on the binary packages. They are however subject to copyright, and thus influence the distribution terms of the source packages. Most of the meson.build files would not meet the threshold of originality criteria required for copyright protection. Some of the more complex meson.build files may be eligible for copyright protection. To avoid any ambiguity and uncertainty, state our intent to not assert copyrights on the build system files by putting them in the public domain with the CC0-1.0 license. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Show Liu <show.liu@linaro.org>
2020-03-18libcamera: framebuffer_allocator: Lift camera restrictions on allocatorLaurent Pinchart
The Camera class currently requires the allocator to have no allocated buffer before the camera is reconfigured, and the allocator to be destroyed before the camera is released. There's no basis for these restrictions anymore, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-03-18libcamera: PixelFormat: Make constructor explicitLaurent Pinchart
To achieve the goal of preventing unwanted conversion between a DRM and a V4L2 FourCC, make the PixelFormat constructor that takes an integer value explicit. All users of pixel formats flagged by the compiler are fixed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-03-18libcamera: Use PixelFormat instead of unsigned int where appropriateNiklas Söderlund
Use the PixelFormat instead of unsigned int where a pixel format is to be used. PixelFormat is defined as an unsigned int but is about to be turned into a class to add functionality. There is no functional change in this patch. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: Fix GLib detectionLaurent Pinchart
Commit 17cccc68a88f ("Add GStreamer plugin and element skeleton") has gained a last minute fix for a clang compilation error with GLib prior to v2.63.0. The fix wasn't properly tested, and failed to check the GLib dependency correctly. This resulted in compilation of the GStreamer element to always be disabled. Fix this by changing the GLib package name from 'glib' to 'glib-2.0'. Fixes: 17cccc68a88f ("Add GStreamer plugin and element skeleton") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2020-03-07gst: Turn the top-level plugin file gstlibcamera.c into a C++ fileLaurent Pinchart
The top-level plugin file gstlibcamera.c is the only C source file in the whole libcamera GStreamer element. To avoid specifying both C and C++ compiler arguments in the future, turn it into a C++ file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2020-03-07gst: libcamerasrc: Prevent src task deadlock on exhausted buffer poolJakub Adam
Allow GstLibcameraPool to notify the source when a new buffer has become available in a previously exhausted buffer pool. This can be used to resume a src task that got paused because it couldn't acquire a buffer. Without this change the src task will never resume from pause once the pool gets exhausted. To trigger the deadlock (it doesn't happen every time), run: gst-launch-1.0 libcamerasrc ! queue ! glimagesink Signed-off-by: Jakub Adam <jakub.adam@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: utils: Factor-out the task resume helperJakub Adam
Task resume will be added in the core GStreamer API in the future and we will need to call this in another location in the following patches. Signed-off-by: Jakub Adam <jakub.adam@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Add a TODO commentNicolas Dufresne
This is to guide upcoming contributors toward what is left to do to get toward a production ready element. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Implement timestamp supportNicolas Dufresne
This is an experimental patch adding timestamp support to the libcamerasrc element. This patch currently assume that the driver timestamp are relative to the system monotonic clock. Without a reference clock source, the timestamp are otherwise unusable, and without timestamp only minor use case can be achieved. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Implement initial streamingNicolas Dufresne
With this patch, the element is now able to push buffers to the next element in the graph. The buffers are currently missing any metadata like timestamp, sequence number. This will be added in the next commit. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: pad: Add method to store retrieve pending buffersNicolas Dufresne
These will be useful for streaming. The requestComplete callback will store the buffers on each pads so that the _run() can pick them up and push them through the pads from a streaming thread. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: Add getters for Stream and FrameBufferNicolas Dufresne
This adds getters on pad/pool/allocator so that we can retrieve the Stream or FrameBuffer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Allocate and release buffersNicolas Dufresne
Setup the allocation and the release of buffers in the element. We have one pooling GstAllocator that wraps the FrameBufferAllocator and tracks the lifetime of FrameBuffer objects. Then, for each pad we have a GstBufferPool object which is only used to avoid re-allocating the GstBuffer structure every time we push a buffer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerapad: Allow storing a poolNicolas Dufresne
This adds get/set helper to store a pool on the pad. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: Add a pool and an allocator implementationNicolas Dufresne
This is needed to track the lifetime of the FrameBufferAllocator in relation to the GstBuffer/GstMemory objects travelling inside GStreamer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Push segment eventNicolas Dufresne
Now that we have stream-start and caps, we can now push a segment event to announce what time will our buffer correlate to. For live sources this is just an open segment in time format. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Implement minimal caps negotiationNicolas Dufresne
This is not expected to work in every possible cases, but should be sufficient as an initial implementation. What it does is that it turns the StreamFormats into caps and queries downstream caps with that as a filter. The result is the subset of caps that can be used. We then keep the first structure in that result and fixate using the default values found in StreamConfiguration as a default in case a range is available. We then validate this configuration and turn the potentially modified configuration into caps that we push downstream. Note that we trust the order in StreamFormats as being sorted best first, but this is not currently in libcamera. A todo has been added in the head of this file as a reminder to fix that in the core. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: utils: Add StreamConfiguration helpersNicolas Dufresne
This adds helpers to deal with the conversion from StreamConfiguration to caps and vice-versa. This is needed to implement caps negotiation. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Send stream start eventNicolas Dufresne
Prior to sending caps, we need to send a stream-start event. This requires generating a stream and a group id. The stream id is random for live sources and the group id is shared across all pads. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Store the srcpad in a vectorNicolas Dufresne
This will allow implementing generic algorithm even if we cannot request pads yet. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerapad: Add a method to access the roleNicolas Dufresne
Each pad can have a different roles. Users will have to request and configure their pads role before moving to a higher state. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Add a task for the streaming threadNicolas Dufresne
Use a GstTask as our internal streaming thread. Unlike GstBaseSrc, we will be running a streaming thread at the element level rather than per pad. This is needed to combine buffer request for multiple pads. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Implement selection and acquisitionNicolas Dufresne
This adds code to select and acquire a camera. With this, it is now possible to run a pipeline like: gst-launch-1.0 libcamerasrc ! fakesink Though no buffer will be streamed yet. In this function, we implement the change_state() virtual method to trigger actions on specific state transitions. Note that we also return GST_STATE_CHANGE_NO_PREROLL in GST_STATE_CHANGE_READY_TO_PAUSED and GST_STATE_CHANGE_PLAYING_TO_PAUSED transitions as this is required for all live sources. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Add a debug categoryNicolas Dufresne
This will allow selecting libcamerasrc traces with the following environment: GST_DEBUG=libcamerasrc:7 Or all libcamera GStreamer element traces using GST_DEBUG="libcamera*:7" Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Add camera-name propertyNicolas Dufresne
This property will be used to select by name the camera to use. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: libcamerasrc: Allocate and add static padNicolas Dufresne
This pad will always be present and will allow simple pipeline to be used to stream from the camera. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-07gst: Add pads to the sourceNicolas Dufresne
This simply adds the boiler plate for pads on the source element. The design is that we have one pad, called "src", that will always be present, and then more pads can be requested prior in READY or less state. Initially pads have one property "stream-role" that let you decide which role this pad will have. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>