| Age | Commit message (Collapse) | Author |
|---|
|
Add setEntry() helper, that automatically detects if updateEntry() or
addEntry() should be used.
Note that updateEntry() will fail if the entry was not yet added, and
addEntry() will fail is the entry was already added. They are silent
failures that cause unexpected values to find their way into the android
metadata instance.
Previously this helper was not necessary, as (with respect to the
current use case) the preview template generator would always add a key
so the other template generators that used the preview template as
boilerplate could reliably use updateEntry(). The preview template
generator will soon decide based on capabilities whether or not to add
keys, so the other template generators need a helper to decide whether
to use updateEntry() or addEntry().
For now only implement it for enums and arithmetic values, as they will
mainly be used in populating templates.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A libcamera camera that supports the manual sensor capability also
satisfies all the requirements for the read sensor settings capability.
Set it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Print messages when some feature is missing that causes hardware level
FULL to not be supported.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraWorker class purpose was to handle acquire fences for incoming
capture requests directed to libcamera.
Now that fences are handled by the core library, it is not required to
handle them in the HAL and the CameraWorker and CaptureRequest classes
can be dropped.
Update the core in CameraDevice class accordingly to queue Requests
directly to the libcamera::Camera and set the release_fence to the
value of the FrameBuffer::fence() for streams of type ::Direct.
While at it make CameraRequest::StreamBuffer::fence a UniqueFD to ease
the management of the fences file descriptor values.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We have some stream resolution which can provide slightly better
frame duration than what we cap (i.e. 1/30 fps). The problem with
this is CTS complains if the camera goes faster during the test
than minFrameDuration reported for that resolution. For instance,
1080p minFrameDuration:
- Nautilus : 33282000ns
- Soraka : 33147000ns
Both are less than capped minFrameDuration 1/30 fps (33333333.33ns).
This patch considers this situation and doesn't cap the
minFrameDuration if the hardware can provide frame durations slightly
better. The tolerance considered is 1% only from the cap.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
CameraStream originally creates FrameBuffers by
FrameBufferAllocator and thus buffers are allocated in V4L2 API.
This replaces the allocator in CameraStream with
PlatformFrameBufferAllocator. It allocates a buffer in a platform
dependent graphic buffer allocation API.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The existing FrameBufferAllocator is not allowed to allocate a
new buffer while Camera is running. This introduces
PlatformFrameBufferAllocator. It allocates FrameBuffer using
cros::CameraBufferManager on ChromeOS and gralloc on non ChromeOS
platform. The allocated FrameBuffer owns the underlying buffer
but must be destroyed before PlatformFrameBufferAllocator is
destroyed.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This applies clang thread safety annotation to
Camera3RequestDescriptor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This applies clang thread safety annotation to CameraDevice.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This fixes the code accessing descriptors and
Camera3RequestDescriptor::pendingStreamsToProcess_ without holding
descriptorsMutex_ and Camera3RequestDescriptor::streamProcessMutex_
in CameraDevice.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This applies clang thread safety annotation to CameraStream.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The initialization on buffers_ in CameraStrean::configure() is not
protected by mutex_. It is no problem because configure() is not
invoked simultaneously while other functions are called. This
protects it to keep the thread safety consistency for buffers access.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This applies clang thread safety annotation to CameraHalManager.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Mutex classes are defined in mutex.h. This replaces thread.h
include for the Mutex classes with mutex.h.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
std::mutex and std::unique_lock are used in android directories,
mixing Mutex and MutexLocker. This consolidates them to Mutex
and MutexLocker.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ConditionVariable is alias to std::condition_variable. This replaces
std::condition_variable with the ConditionVariable. It enables
replacing ConditionVariable implementation easily in the following
patches.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide a directionToString() helper to return a human-friendly name
for camera3_stream_t->stream_type. Replace the int value being printed
in configureStreams() INFO log with directionToString().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Provide a constructor for StreamBuffer and use that while populating
Camera3RequestDescriptor::buffers_ vector. Also provide the default
move-constructor (required as StreamBuffer is stored in a vector in
Camera3RequestDescriptor) and destructor for the StreamBuffer struct.
Also declare a default move assignment operator and disable the
copy constructor and move operator explicitly with
LIBCAMERA_DISABLE_COPY().
While at it, initialize pointers members in the StreamBuffer struct
to nullptr, with StreamBuffer::status set to Status::Success by default.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
cros::CameraBufferManager can be nullptr if there is an error in
its creation. Place a null-check guard to check it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a dedicated worker class derived from libcamera::Thread.
The worker class maintains a queue for post-processing requests
and waits for a post-processing request to become available.
It will process them as per FIFO before de-queuing it from the
queue.
The entire post-processing handling iteration is locked under
streamsProcessMutex_ which helps us to queue all the post-processing
request at once, before any of the post-processing completion slot
(streamProcessingComplete()) is allowed to run for post-processing
requests completing in parallel. This helps us to manage both
synchronous and asynchronous errors encountered during the entire
post processing operation. Since a post-processing operation can
even complete after CameraDevice::requestComplete() has returned,
we need to check and complete the descriptor from
streamProcessingComplete() running in the PostProcessorWorker's
thread.
This patch also implements a flush() for the PostProcessorWorker
class which is responsible to purge post-processing requests
queued up while a camera is stopping/flushing. It is hooked with
CameraStream::flush(), which isn't used currently but will be
used when we handle flush/stop scenarios in greater detail
subsequently (in a different patchset).
The libcamera request completion handler CameraDevice::requestComplete()
assumes that the request that has just completed is at the front of the
queue. Now that the post-processor runs asynchronously, this isn't true
anymore, a request being post-processed will stay in the queue and a new
libcamera request may complete. Remove that assumption, and use the
request cookie to obtain the Camera3RequestDescriptor.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
PostProcessor::process() is invoked by CameraStream class
in case any post-processing is required for the camera stream.
The failure or success is checked via the value returned by
CameraStream::process().
Now that the post-processor notifies about the post-processing
completion operation, we can drop the return value of
PostProcessor::process(). The status of post-processing is passed
to CameraDevice::streamProcessingComplete() by the
PostProcessor::processComplete signal's slot.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Notify that the post processing for a request has been completed,
via a signal. The signal is emitted with a context pointer along with
status of the buffer. The function CameraDevice::streamProcessingComplete()
will finally set the status on the request descriptor and complete the
descriptor if all the streams requiring post processing are completed.
If buffer status obtained is in error state, notify the status to the
framework and set the overall error status on the descriptor via
setBufferStatus().
We need to track the number of streams requiring post-processing
per Camera3RequestDescriptor (i.e. per capture request). Introduce
a std::map to track the post-processing of streams. The nodes
are dropped from the map when a particular stream post processing
is completed (or on error paths). A std::map is selected for tracking
post-processing requests, since we will move post-processing to be
asynchronous in subsequent commits. A vector or queue will not be
suitable as the sequential order of post-processing completion
of various requests won't be guaranteed then.
A streamsProcessMutex_ has been introduced here as well, which will be
applicable to guard access to descriptor's pendingStreamsToProcess_ when
post-processing is moved to be asynchronous in subsequent commits.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Save and provide the context for post-processor of a camera stream
via Camera3RequestDescriptor::StreamBuffer. We extend the structure
to include source and destination buffers for the post processor, along
with CameraStream::Type::Internal buffer pointer (if any). In addition
to that, a back pointer to Camera3RequestDescriptor is convenient to
get access to overall descriptor (status, metadata settings etc.).
Also, migrate CameraStream::process() and PostProcessor::process()
signature to use Camera3RequestDescriptor::StreamBuffer only. This
will be helpful when we move to async post-processing in subsequent
commits.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Currently, we use Camera3RequestDescriptor::Status to determine:
- When the descriptor has been completely processed by HAL
- Whether any errors were encountered, during its processing
Both of these are essential to know whether the descriptor is eligible
to call process_capture_results() through sendCaptureResults().
When a status(Success/Error) is set on the descriptor, it is ready to
be sent back via sendCaptureResults(). However, this might lead to
undesired results especially when sendCaptureResults() runs in a
different thread (for e.g. stream's post-processor async completion
slot).
This patch decouples the descriptor status (Success/Error) from the
descriptor's completion status (pending or complete). The advantage
of this is we can set the completion status when the descriptor has
been processed fully by the layer and we can set the error status on
the descriptor wherever an error is encountered, throughout the
lifetime of the descriptor in the HAL layer.
While at it, introduce a wrapper completeDescriptor() around
sendCaptureResults(). completeDescriptor() as the name suggests will
mark the descriptor as complete, so it is ready to be sent back.
The locking mechanism is moved from sendCaptureResults() to this wrapper
since the intention is to use completeDescriptor() in place of existing
sendCaptureResults() calls.
Also make sure the sequence of abortRequest() call happens in the same
order at all places i.e. after its added to the descriptors_ queue. Fix
one of the abortRequest() call accordingly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Instead of simply returning if encoder_ is nullptr, fail hard
via an assertion. It is quite unlikely that encoder_ could only
be null as a result of a fatal bug in the code, so be loud about
the failure.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of checking postProcessor for nullptr, replace this
check with an assertion that checks if the camera stream's
type is not Type::Direct. Since it makes no sense to call
CameraStream::process() on a Type::Direct camera stream.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
camera_device.cpp doesn't use the PostProcessor class, the
post_processor.h header shouldn't be included. Removing it causes a
compilation failure as the CameraBuffer class is not defined anymore,
include camera_buffer.h instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Rename CameraMetadata::get() to CameraMetadata::getMetadata()
to avoid confusion with std::unique_ptr::get() when CameraMetadata
is used with a std::unique_ptr.
No functional changes intended in this patch.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
There's no need for the move constructor and the destructor to be
inline. Define them explicitly, with default implementations. This
allows usage of the CameraStream class without a complete definition of
the PostProcessor class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The camera HAL APIs requires that any acquire fence that hasn't been
waited on to be sent back to the framework as a release fence. The
CameraDevice already copies the acquire fence to the release fence when
signaling request completion, but the CameraStream incorrectly closes
the fence when a wait fails and sets it to -1. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The camera3_stream_buffer_t structure is meant to communicate between
the camera service and the HAL. They are short-live structures that
don't outlive the .process_capture_request() operation (when queuing
requests) or the .process_capture_result() callback.
We currently store copies of the camera3_stream_buffer_t passed to
.process_capture_request() in Camera3RequestDescriptor::StreamBuffer to
store the structure members that the HAL need, and reuse them when
calling the .process_capture_result() callback. This is conceptually not
right, as the camera3_stream_buffer_t pass to the callback are not the
same objects as the ones received in .process_capture_request().
Store individual fields of the camera3_stream_buffer_t in StreamBuffer
instead of copying the whole structure. This gives the HAL full control
of how data is stored, and properly decouples request queueing from
result reporting.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Call abortRequest() in CameraDevice::requestComplete() instead of
open-coding it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The camera3_stream_t instances are used to interact with the camera
service, whose API uses non-const pointers. Replace the const reference
returned by CameraStream::camera3Stream() with a non-const pointer. It
turns out that nobody calls this function, but new users will be
introduced in subsequent commits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that we have a proper structure to model a stream buffer, pass it to
CameraStream::process() instead of the camera3_stream_buffer_t. This
will allow accessing other members of StreamBuffer in subsequent
commits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The Camera3RequestDescriptor structure stores, for each stream, the
camera3_stream_buffer_t and the libcamera FrameBuffer in two separate
vectors. This complicates buffer handling, as the code needs to keep
both vectors in sync. Create a new structure to group all data about
per-stream buffers to simplify this.
As a side effect, we need to create a local vector of
camera3_stream_buffer_t in CameraDevice::sendCaptureResults() as the
camera3_stream_buffer_t instances stored in the new structure in
Camera3RequestDescriptor are not contiguous anymore. This is a small
price to pay for easier handling of buffers, and will be refactored in
subsequent commits anyway.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Data (or broader context) required for post processing of a camera request
is saved via Camera3RequestDescriptor. Instead of passing individual
arguments to CameraStream::process(), pass the Camera3RequestDescriptor
pointer to it. All the arguments necessary to run the post-processor can
be accessed from the descriptor.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The camera3_capture_result_t is only needed to convey capture results to
the camera service through the process_capture_result() callback.
There's no need to store it in the Camera3RequestDescriptor. Build it
dynamically in CameraDevice::sendCaptureResults() instead.
This requires storing the result metadata created in
CameraDevice::requestComplete() in the Camera3RequestDescriptor. A side
effect of this change is that the request metadata lifetime will match
the Camera3RequestDescriptor instead of being destroyed at the end of
requestComplete(). This will be needed to support asynchronous
post-processing, where the request completion will be signaled to the
camera service asynchronously from requestComplete().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera3RequestDescriptor structure is growing into an object with
member functions. Turn it into a class, uninline the destructor to
reduce code size, explicitly disable copy as requests are not copyable,
and delete the default constructor to force all instances to be fully
constructed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Camera3RequestDescriptor is a utility structure that groups information
about a capture request. It can be and will be extended to preserve the
context of a capture overall. Since the context of a capture needs to
be shared among other classes (for e.g. CameraStream) having a private
definition of the struct in CameraDevice class doesn't help.
Hence, de-scope the structure so that it can be shared with other
components (through references or pointers). Splitting the structure to
a separate file will help avoiding circular dependencies when using it
through the HAL implementation.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
When the camera HAL detects an out-of-order completion of a request, it
sends to the camera framework a CAMERA3_MSG_ERROR_DEVICE error.
Such error not only forces the service to close the camera as prescribed
by the camera3 specification, but in some implementation (specifically
the ChromeOS one) it causes the camera service to abort and exit.
This prevents any error messages from being printed by libcamera, as the
library gets terminated before getting to that point, and also hides the
printout of error messages that lead to out-of-order completion, making
it impossible to get from the output log what happened.
Move the call to notifyError() at the end of the error path and demote
the error message to LogLevels::Error from Fatal to let the service
implementation decide how to handle CAMERA3_MSG_ERROR_DEVICE errors.
Before this patch, when waiting on a fence fails and the capture
request is not queued to the Camera, we get an out-of-order completion
but no backtrace. With this patch applied the error path is visible:
ERROR HAL camera_worker.cpp:122 Failed waiting for fence: 82: Timer expired
ERROR HAL camera_device.cpp:1110 '\_SB_.PCI0.I2C2.CAM0': Out-of-order completion for request 0x00007e6de4004c70
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
requests"
Commit d165f7da34b8 ("android: camera_device: Configure one stream for
identical stream requests") introduced the ability to generate through
post-processing YUV streams of identical size and format.
However the change didn't fully take into account the situation
where only mapped streams are contained in the request submitted by
the camera service to the HAL. In this case the Request will be queued
with no buffers and refused by the Camera.
Even if this seems a corner case it causes a few CTS to fail, and more
problematically it triggers out-of-order completion of requests, causing
the camera service to abort.
ERROR Camera camera.cpp:1031 Request contains no buffers
ERROR HAL camera_device.cpp:1109 '\_SB_.PCI0.I2C2.CAM0': Out-of-order completion for request 0x00007a1f1800ccd0
ERROR cros_camera_service[15706:15711]: [camera_device_adapter.cc(744)] (15711) Notify(): Fatal device error; aborting the camera service
Revert the commit until a proper solution is implemented.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Limit the reported minumum frame duration to 30 FPS.
The reason to do is to bring the libcamra HAL in par with the Intel
HAL implementation on IPU3 platform, where 30FPS is the frame rate used
to perform quality tuning in the closed-source IPA module and has been
validated as the most efficient rate for the power/performace budget.
This change bring into the HAL a platform specific constraints, which
might be opportune for most platforms but should rather be configurable
by system integrators. Record that with a \todo entry.
Also record that, even if we report a lower frame rate, we currently
do not limit what the camera actually produce.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As reported by the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES documentation
in the Android developer reference:
"For devices advertising any color filter arrangement other than NIR, or
devices not advertising color filter arrangement, this list will always
include (min, max) and (max, max) where min <= 15 and max = the maximum
output frame rate of the maximum YUV_420_888 output size."
Collect the higher FPS of the larger YUV stream and use it with the
minimum FPS rate the camera can produce to populate the
ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS and
ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS static metadata are
populated by looping on the streamConfigurations_ vector.
Unify them in a single loop to avoid repeating it.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a debug statement to print out the list of collected output stream
and their characteristics.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Register as preview streams only streams capable of producing at least
30 FPS.
This requirement comes from inspecting the existing HAL implementation
on Intel IPU3 platform and from inspecting the CTS RecordingTests
results.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While building the list of supported stream configurations also collect
the absolute max frame durations to be used to populate the sensor
maximum frame duration.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We currently hardcode 2560x1920@30FPS as the only stalling frame duration.
This is of course not correct, and all the required information to
properly populate the ANDROID_SCALER_AVAILABLE_STALL_DURATIONS static
metadata are available from initializeStaticMetadata().
Use the collected stalling durations and sizes to properly popoulate the
static property.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
