| Age | Commit message (Collapse) | Author |
|---|
|
This applies clang thread safety annotation to CameraStream.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Mutex classes are defined in mutex.h. This replaces thread.h
include for the Mutex classes with mutex.h.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
std::mutex and std::unique_lock are used in android directories,
mixing Mutex and MutexLocker. This consolidates them to Mutex
and MutexLocker.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ConditionVariable is alias to std::condition_variable. This replaces
std::condition_variable with the ConditionVariable. It enables
replacing ConditionVariable implementation easily in the following
patches.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Introduce a dedicated worker class derived from libcamera::Thread.
The worker class maintains a queue for post-processing requests
and waits for a post-processing request to become available.
It will process them as per FIFO before de-queuing it from the
queue.
The entire post-processing handling iteration is locked under
streamsProcessMutex_ which helps us to queue all the post-processing
request at once, before any of the post-processing completion slot
(streamProcessingComplete()) is allowed to run for post-processing
requests completing in parallel. This helps us to manage both
synchronous and asynchronous errors encountered during the entire
post processing operation. Since a post-processing operation can
even complete after CameraDevice::requestComplete() has returned,
we need to check and complete the descriptor from
streamProcessingComplete() running in the PostProcessorWorker's
thread.
This patch also implements a flush() for the PostProcessorWorker
class which is responsible to purge post-processing requests
queued up while a camera is stopping/flushing. It is hooked with
CameraStream::flush(), which isn't used currently but will be
used when we handle flush/stop scenarios in greater detail
subsequently (in a different patchset).
The libcamera request completion handler CameraDevice::requestComplete()
assumes that the request that has just completed is at the front of the
queue. Now that the post-processor runs asynchronously, this isn't true
anymore, a request being post-processed will stay in the queue and a new
libcamera request may complete. Remove that assumption, and use the
request cookie to obtain the Camera3RequestDescriptor.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Save and provide the context for post-processor of a camera stream
via Camera3RequestDescriptor::StreamBuffer. We extend the structure
to include source and destination buffers for the post processor, along
with CameraStream::Type::Internal buffer pointer (if any). In addition
to that, a back pointer to Camera3RequestDescriptor is convenient to
get access to overall descriptor (status, metadata settings etc.).
Also, migrate CameraStream::process() and PostProcessor::process()
signature to use Camera3RequestDescriptor::StreamBuffer only. This
will be helpful when we move to async post-processing in subsequent
commits.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
There's no need for the move constructor and the destructor to be
inline. Define them explicitly, with default implementations. This
allows usage of the CameraStream class without a complete definition of
the PostProcessor class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The camera3_stream_t instances are used to interact with the camera
service, whose API uses non-const pointers. Replace the const reference
returned by CameraStream::camera3Stream() with a non-const pointer. It
turns out that nobody calls this function, but new users will be
introduced in subsequent commits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that we have a proper structure to model a stream buffer, pass it to
CameraStream::process() instead of the camera3_stream_buffer_t. This
will allow accessing other members of StreamBuffer in subsequent
commits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Data (or broader context) required for post processing of a camera request
is saved via Camera3RequestDescriptor. Instead of passing individual
arguments to CameraStream::process(), pass the Camera3RequestDescriptor
pointer to it. All the arguments necessary to run the post-processor can
be accessed from the descriptor.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Acquire fences for streams of type Mapped generated by
post-processing are not correctly handled and are currently
ignored by the camera HAL.
Fix this by adding CameraStream::waitFence(), executed before
starting the post-processing in CameraStream::process().
The change applies to all streams generated by post-processing (Mapped
and Internal) but currently acquire fences of Internal streams are
handled by the camera worker. Postpone that to post-processing time by
passing -1 to the Worker for Internal streams.
Also correct the release_fence handling for failed captures, as the
framework requires the release fences to be set to the acquire fence
value if the acquire fence has not been waited on.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The MappedFrameBuffer is a convenience feature which sits on top of the
FrameBuffer and facilitates mapping it to CPU accessible memory with
mmap.
This implementation is internal and currently sits in the same internal
files as the internal FrameBuffer, thus exposing those internals to
users of the MappedFramebuffer implementation.
Move the MappedFrameBuffer and MappedBuffer implementation to its own
implementation files, and fix the sources throughout to use that
accordingly.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Commit 7532caa2c77b ("android: camera_device: Reset config_ if
Camera::configure() fails") reworked the configuration sequence to
ensure that the CameraConfiguration pointers gets reset when
configuration fails. This inadvertently causes a null pointer
dereference, as the CameraStream constructor accesses the camera
configuration through CameraDevice::cameraConfiguration() before the
internal config_ pointer is set.
Fix this by passing the configuration pointer explicitly to the
CameraStream constructor.
Fixes: 7532caa2c77b ("android: camera_device: Reset config_ if Camera::configure() fails")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
libcamera internal headers are not installed system-wide. Hence, any
inclusion of internal headers should follow the #include directive
form:
#include "libcamera/internal/header.h"
This was not the case for a few of the class in android HAL. Fix them.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The destination buffer for the post-processing component is
currently first mapped in the CameraDevice class and then passed
to CameraStream which simply calls the post-processor interface.
Move the mapping to CameraStream::process() to tie the buffer
mapping to the lifetime of the CameraBuffer instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The type of the destination buffer in PostProcessor::process() is
libcamera::Span. libcamera::Span is used for one dimension buffer
(e.g. blob buffer). The destination can be multiple dimensions
buffer (e.g. yuv frame). Therefore, this changes the type of the
destination buffer to MappedFrameBuffer.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Set the following android result metadata:
- ANDROID_LENS_FOCAL_LENGTH
- ANDROID_LENS_APERTURE
- ANDROID_JPEG_GPS_TIMESTAMP
- ANDROID_JPEG_GPS_COORDINATES
- ANDROID_JPEG_GPS_PROCESSING_METHOD
And the following EXIF fields:
- GPSDatestamp
- GPSTimestamp
- GPSLocation
- GPSLatitudeRef
- GPSLatitude
- GPSLongitudeRef
- GPSLongitude
- GPSAltitudeRef
- GPSAltitude
- GPSProcessingMethod
- FocalLength
- ExposureTime
- FNumber
- ISO
- Flash
- WhiteBalance
- SubsecTime
- SubsecTimeOriginal
- SubsecTimeDigitized
Based on android request metadata.
This allows the following CTS tests to pass:
- android.hardware.camera2.cts.StillCaptureTest#testFocalLengths
- android.hardware.camera2.cts.StillCaptureTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
CameraStream initializes several member variables in the
initializer list. Some of them are unchanged after. This makes
them constant. Especially, doing to |cameraDevice_| represents
CameraStream doesn't have the ownership of it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg.
This encapsulates the encoder and EXIF generation code into the
PostProcessorJpeg layer and removes these specifics related to JPEG,
from the CameraStream itself.
Signed-off-by: Umang Jain <email@uajain.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
|
|
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a brief documentation block to the CameraStream class.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a FrameBufferAllocator class member to the CameraStream class.
The allocator is constructed for CameraStream instances that needs
internal allocation and automatically deleted.
Allocate FrameBuffers using the allocator_ class member in the
CameraStream class at CameraStream::configure() time and add two
methods to the CameraStream class to get and put FrameBuffer pointers
from the pool of allocated buffers. As buffer allocation can take place
only after the Camera has been configured, move the CameraStream
configuration loop in the CameraDevice class after camera_->configure()
call.
The newly created pool will be used to provide buffers to CameraStream
that need to provide memory to libcamera where to deliver frames.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Loop over the CameraStream instances and use their interface to perform
CameraStream configuration.
Modify CameraStream::configure() to configure the android stream buffer
count and to retrieve the StreamConfiguration by index instead of
receiving it as a parameter.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fetch the format and size of the libcamera::StreamConfiguration
associated with a CameraStream by accessing the configuration by
index.
This removes the need to store the libcamera stream format and sizes
as class members and avoid duplicating information that might get out
of sync.
It also allows to remove the StreamConfiguration from the constructor
parameters list, as it can be identified by its index. While at it,
re-order the constructor parameters order.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
It's a common pattern to access the libcamera::Stream and
libcamera::StreamConfiguration using the CameraStream instance's
index.
Add two methods to the CameraStream to shorten access to the
two fields. This allows removing the index() method from the class
interface.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Move the JPEG processing procedure to the individual CameraStream
by augmenting the class with a CameraStream::process() method.
This allows removing the CameraStream::encoder() method.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass the android camera3_stream_t, and a libcamera::StreamConfiguration
to identify the source and destination parameters of this stream.
Pass a CameraDevice pointer to the CameraStream constructor to allow
retrieval of the StreamConfiguration associated with the CameraStream.
Also change the format on which the CameraDevice performs checks to
decide if post-processing is required, as the libcamera facing format is
not meaningful anymore, but the Android requested format should be used
instead.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Delegate the construction of the encoder to the CameraStream class
for streams that need post-processing.
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define the CameraStream::Type enumeration and assign it to
each CameraStream instance at construction time.
The CameraStream type will be used to decide if memory needs to be
allocated on its behalf or if the stream is backed by memory externally
allocated by the Android framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Break CameraStream out of the CameraDevice class.
No functional changes, only the code is moved.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
