summaryrefslogtreecommitdiff
path: root/src/android/camera_device.cpp
AgeCommit message (Collapse)Author
2021-05-27android: camera_device: Fix sensor frame durationPaul Elder
The sensor frame duration should be set by IPA. Get the information for the result metadata from libcamera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-27controls: Split FrameDurations into FrameDuration and FrameDurationLimitsPaul Elder
We need a separate control to report the nominal frame duration, but it's also useful to report the min/max frame duration values that will be used. Split the FrameDurations control into FrameDuration and FrameDurationLimits respectively to support both of these. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-26android: camera_metadata: Add functions for instrumenting resizingPaul Elder
Add utility functions to CameraMetadata to check if it has been resized, and for outputting the actual entry and data count. This is meant to be used to output information on resizing, to assist developers in choosing proper initial sizes to avoid resizing. Also make CameraDevice use these functions for static and result metadata. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-25android: camera_device: Get properties from configurationJacopo Mondi
Open the HAL configuration file in the Camera HAL manager and get the camera properties for each created CameraDevice and initialize it with them. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-25android: CameraDevice: Report proper min and max frame durationsPaul Elder
The HAL layer was getting the min and max frame durations from the camera, then rounding it to fps to report as available fps ranges. The same min and max frame durations were then being reported as min and max frame durations. Since the fps are integer values while the frame durations are in ns, this caused a rounding error making it seem like we were reporting an available max fps that was higher than what was allowed by the minimum frame duration. An example is if the minimum frame duration is reported as 33366700ns. The HAL layer would then convert it to fps, which is 29.97, but it would be rounded and reported as 30 fps. When 30 fps is converted to a frame duration it is 33333333ns, which is less than the minimum frame duration that we report. Thus the minimum frame duration that we report contradicts the fps range that we report. Fix this by recalculating the frame durations based on the rounded fps values. This allows the following CTS test to pass: - android.hardware.camera2.cts.SurfaceViewPreviewTest#testPreviewFpsRange Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-14android: camera_device: Use the new CameraMetadata functionsPaul Elder
Now that CameraMetadata supports more convenient functions, use those instead. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-14android: camera_metadata: Auto-resize CameraMetadataPaul Elder
Previously we had to manually declare the size of CameraMetadata on allocation, and its count could not be changed after construction. Change CameraMetadata's behavior so that the user can simply add or update entries, and the CameraMetadata will auto-resize (double the size) as necessary. Also remove everything involved with calculating the initial size for any CameraMetadata instances. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-12android: camera_device: Fix typo in result metadata allocation errorPaul Elder
Fix an error message typo s/static/result/. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-10android: camera_device: Report sensor physical sizeJacopo Mondi
Calculate the value of the ANDROID_SENSOR_INFO_PHYSICAL_SIZE property multiplying the number of sensor's readable pixels with the pixel unit cell size if provided by the Camera. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-06android: camera_device: Use controls::SensorTimestampJacopo Mondi
Use the controls::SensorTimestamp value to populate ANDROID_SENSOR_TIMESTAMP result metadata. The Camera is assumed to provide the control in the Request metadata. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-04-20android: CameraDevice: Fix Camera3RequestDescriptor leakageHirokazu Honda
CameraDevice creates Camera3RequestDescriptor in processCaptureRequest() and disallocates in requestComplete(). Camera3RequestDescriptor can never be destroyed if requestComplete() is never called. This avoid the memory leakage by storing them in map CameraRequestDescriptor. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-20android: CameraDevice: Add stop()Hirokazu Honda
This adds CameraDevice::stop(), which cleans up the member variables of CameraDevice. It is called in CameraDevice::close() and CameraDevice::configureStreams(). Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: CameraDevice: Deny non ROTATION_0 stream configurationHirokazu Honda
libcamera doesn't handle crop_rotate_scale_degrees. Therefore, if it is requested, that is, crop_rotate_scale_degrees is not CAMERA3_STREAM_ROTATION_0, the configuration should fail. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: CameraDevice: Log rotation variables in camera3_streamHirokazu Honda
|rotation| and |crop_rotate_scale_degrees| are important info of a configuration. They should be logged. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: CameraDevice: Validate crop_rotate_scale_degrees in configurationHirokazu Honda
libcamera doesn't handle |crop_rotate_scale_degrees| in camera3_stream at all. This adds the validation of the requested |crop_rotate_scale_degrees| in configuration, but still not handle the specified values. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: CameraDevice: Add more camera3_capture_request validationHirokazu Honda
This adds more validation to camera3_capture_request mainly about buffer_handle values. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: cameraDevice: Factorize the code of validating camera3_capture_requestHirokazu Honda
CameraDevice::processCaptureRequest() checks the validity of a provided camera3_capture_request. This factorizes the code in order to add more validation to the request later. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-04android: CameraDevice: Deny if the streams is emptyHirokazu Honda
This checks if the number of streams is zero on configuration and then returns -EINVAL. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-29android: camera_device: Add null check for ScalerCrop controlPhi-Bang Nguyen
The ScalerCrop control does not contain the null check which can cause the camera HAL crash at boot. Fix it. Fixes: 31a1a628cd0e ("android: camera_device: Register MAX_DIGITAL_ZOOM") Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Mark getResultMetadata() const functionHirokazu Honda
CameraDevice::getResultMetadata() doesn't change either |descriptor| and member variables. It should be marked as a const function and |descriptor| should be passed with const lvalue reference. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Manage requestTemplates_ with std::unique_ptrHirokazu Honda
CameraMetadata stored in requestTemplates_ in CameraDevice is not necessary to be a raw pointer. This reduces the manual new/delete code by changing the type to std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Manage staticMetadata_ with std::unique_ptrHirokazu Honda
staticMetadata_ in CameraDevice is not necessary to be a raw pointer. This reduces the manual new/delete code by changing the type to std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: Camera3RequestDescriptor: Manage buffers with std::vectorHirokazu Honda
Camera3RequestDescriptor has a length and an allocated buffer for camera_stream_buffer_t array. This replaces the variables with std::vector. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Take shared_ptr in constructorHirokazu Honda
CameraDevice takes the ownership of Camera. Therefore, shared_ptr would rather be used than const shared_ptr&. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraHalManager: Hold CameraDevice with std::unique_ptrHirokazu Honda
CameraDevice is owned by CameraHalManager. The ownership of the object is not shared with other classes. So CameraHalManager should manage CameraDevice with std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-22android: camera_device: Do not default External to FrontJacopo Mondi
Now that the camera location is not defaulted anymore in the library but doesn't get registered if the firmware interface does not provide the information, do not default it to FRONT if LocationExternal is reported. To maintain compatibility with CTS requirements, default location to FRONT only if the camera property is not available. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Generate template for VideoJacopo Mondi
The capture request template for video recording use cases requires a fixed FPS range. Generate the request templates for the VIDEO_RECORD and VIDEO_SNAPSHOT capture intents using the preview template and updating the supported FPS range. This change fixes the CTS tests android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRecordingTemplate Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Fail template on no FPS rangeJacopo Mondi
The camera supported FPS range is crucial to distinguish between capture templates for preview and video recording. If the pipeline handler did not specify an available FPS range by registering the controls::FrameDurations property so far the control was simply not added to the generated capture template. In order to prepare to generate templates for video recording which require a fixed FPS range, fail earlier in generating any template at all if the available FPS range is not provided by the Camera. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Refuse unsupported templatesJacopo Mondi
The current implementation of constructDefaultRequestSettings() returns the same capture template for all the capture intent. As the correctness of the generated template is verified by CTS it is better to return an error for unsupported capture use cases. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Return AE FPS rangeJacopo Mondi
The result metadata reports an arbitrary {30, 30} FPS range for the AE algorithm. The actual FPS range should be returned in the Request::metadata, but as libcamera currently does not support that feature temporarily work around the issue and return the FPS range requested by the camera framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Use AE FPS range in templateJacopo Mondi
The request template returned by requestTemplatePreview() uses an arbitrary {15, 30} Auto-Exposure algorithm FPS range. Use the one calculated at static metadata creation time, which is consistent with the camera limits. Once template generation will be performed inspecting the requested capture intent, the FPS range over which the AE algorithm can range shall be tuned accordingly. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-09android: camera_device: Compute frame durationsJacopo Mondi
Use the FrameDuration control reported by pipeline handlers to register the Auto-Exposure routine FPS range, the minimum stream frame durations and the sensor maximum frame duration. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-05android: camera_device: Update gralloc usage flags for streamsLaurent Pinchart
When configuring streams, the camera HAL is supposed to update the gralloc usage flags to reflect the operations it will need to do on the stream buffers. Failure to do so leads to incorrect format selection by gralloc for the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format, as gralloc will not take into consideration the need of the camera to access the buffers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-03android: Move buffer mapping to CameraStreamJacopo Mondi
The destination buffer for the post-processing component is currently first mapped in the CameraDevice class and then passed to CameraStream which simply calls the post-processor interface. Move the mapping to CameraStream::process() to tie the buffer mapping to the lifetime of the CameraBuffer instance. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-03android: camera_device: Rename buffer fieldsJacopo Mondi
The buffers passed to the post processor are currently named 'buffer' and 'mapped', names that do not convey their role. Use 'src' and 'dest' instead. Cosmetic change only. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-03android: Introduce CameraBuffer interfaceJacopo Mondi
In order to provide support for different memory backends, move the MappedCamera3Buffer class definition outside of the CameraDevice class to its own file and rename it in CameraBuffer. The interface defined in camera_buffer.h will be implemented by different backends that will be placed in the src/android/mm subdirectory. Provide a first implementation for the 'generic android' backend which matches the existing one. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-24android: camera_device: Set the camera location to Front if ExternalPaul Elder
Our android HAL implementation currently does not support external cameras, so if the camera location property is external, set it to front. This allows the following CTS test to pass: - android.hardware.camera2.cts.CameraManagerTest#testCameraManagerGetDeviceIdList Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-08android: camera_device: Calculate MAX_JPEG_SIZEJacopo Mondi
Calculate the JPEG maximum size using the maximum preview format size multiplied by a 1.5 factor. The same multiplication factor is used in the existing HAL implementations in ChromeOS. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Report HOT_PIXEL_MAP_MODE as OFFJacopo Mondi
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the presence of the ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE result metadata. Report ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF as the Camera HAL does not support the generation of an hot pixel correction map. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Report sensor test pattern modeJacopo Mondi
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the presence of the ANDROID_SENSOR_TEST_PATTERN_MODE result metadata. Report the only supported value of ANDROID_SENSOR_TEST_PATTERN_MODE_OFF. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Report AF_MODE_OFF in templateJacopo Mondi
The CaptureResultTest#testCameraCaptureResultAllKeys CTS test enforces the presence of the auto focus mode in the preview request template. Add the only supported mode AF_MODE_OFF in the generated template. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Use AF_MODE_OFF in scene overrideJacopo Mondi
The camera HAL does currently list AF_MODE_OFF as the only supported auto-focus mode in the ANDROID_CONTROL_AF_AVAILABLE_MODES static metadata. For this reason reporting AF_MODE_AUTO as scene override is wrong. At the moment scene override is disabled in the Camera HAL, but this is worth a fix nonetheless. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Report AE_EXPOSURE_COMPENSATIONJacopo Mondi
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the presence of the ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION result metadata. Report 0 as the current value for ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION in the result metadata pack. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-05android: camera_device: Report COLOR_CORRECTION_ABERRATION_MODEJacopo Mondi
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the presence of the ANDROID_COLOR_CORRECTION_ABERRATION_MODE result metadata. Report the only supported value of ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-04android: camera_device: Generate JPEG thumbnail sizesJacopo Mondi
The list of the available thumbnail sizes is generated from the list of available JPEG resolution, one for each aspect ratio. This change fixes the CTS test android.hardware.cts.CameraTest#testJpegThumbnailSize Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-04android: camera_device: Fix wrong commentJacopo Mondi
Fix a wrong comment. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-02libcamera: Improve Request life cycle trackingJacopo Mondi
The current logging to track the status of a Request when running the Android camera HAL provide the following information: When a Request is queued to libcamera: HAL camera_device.cpp:1776 '\_SB_.PCI0.I2C2.CAM0': Queueing Request to libcamera with 1 HAL streams When a Request completes: Request request.cpp:268 Request has completed - cookie: 138508601719648 The queueing of a Request reports the number of streams it contains while the completion of a Request reports the address of the associated cookie. This makes very hard to keep track of what Requests have completed, as the logging associated with a queue/complete event does not allow to identify a Request easily. Add two more printouts to make it easier to track a Request life cycle. To make it possible to print the Request cookie in the CameraDevice class add a method to access it from the CameraRequest class. The result looks like the following trace: Request request.cpp:92 Created request - cookie: 140701719392768 HAL camera_device.cpp:1710 '\_SB_.PCI0.I2C2.CAM0': Queueing request 140701719392768 with 1 streams HAL camera_device.cpp:1747 '\_SB_.PCI0.I2C2.CAM0': 0 - (4160x3104)[0x00000023] -> (4160x3104)[NV12] (direct) ... Request request.cpp:268 Request has completed - cookie: 140701719392768 HAL camera_device.cpp:1800 '\_SB_.PCI0.I2C2.CAM0': Request 140701719392768 completed with 1 streams.. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-02android: camera_device: Use reference to settingsJacopo Mondi
In preparation to use the keys part of a capture request to fill in the result metadata, create a reference to descriptor_->settings_. While at it, move the 'ret' variable declaration to the beginning of the function and rename it in 'found', as it will be used in many places and move the \todo comment up as it applies to all metadata whose value is copied from settings. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-02android: camera_device: Add missing request keysJacopo Mondi
The Camera HAL does not report all the Request keys which are mandatory for the advertised BACKWARD_COMPATIBLE capabilities level. Add them. This fixes the CTS test: android.hardware.camera2.cts.StaticMetadataTest#testCapabilities Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-02-02android: camera_device: Alphabetically sort keysJacopo Mondi
The vectors of available characteristics, request and result keys are not sorted. This makes more complex than necessary spotting duplication of keys. Re-sort the vectors initializer lists alphabetically. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>