| Age | Commit message (Collapse) | Author |
|---|
|
Currently, enums that are passed between pipeline handlers and their IPA
must be defined in a mojom file. However, there is a use case for
enum/flags to be defined in a C++ header, such that the enum can be used
in a component other than the pipeline handler and its IPA.
To support this, add support for the skipHeader attribute for enums.
Like structs, it is only allowed in core.mojom.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing Flags in function
parameters, add an enum class TestFlags and Flags<TestFlags> to some
function parameters, both for input and output and Signals.
While at it, update the ipa_interface_test.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing enums in function
parameters, add IPAOperationCode to the parameter list of init().
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Flags<E> as a supported type in the IPA interface.
It is used in mojom with the [flags] attribute. Any field or parameter
type E that is prefixed with the [flags] attribute will direct the code
generator to generate the type name "Flags<E>" and appropriate
serialization/deserialization code for Flags<E> instead of for E.
It is usable and has been tested in struct members, function input and
output parameters, and Signal parameters. This does not add support for
returning Flags as direct return values.
Additionally, the [scopedEnum] attribute can be used on enum
definitions, which will instruct the code generator to convert it to an
enum class instead of a raw enum.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement an IPADataSerializer for Flags.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update CamHelper::getDelays() to return the sensor HBLANK delay. The
HBLANK delay is set to the same value as VBLANK delay for all sensors in
the Raspberry Pi IPA.
Return the HBLANK gain delay from the IPA to the pipeline handler, and
initialise DelayedControls to handle V4L2_CID_HBLANK with this delay
value.
As a drive-by, check that the V4L2_CID_HBLANK control is available when
calling IPARPi::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length (in units of pixels) to
the IPACameraSensorInfo structure. This replaces the existing lineLength
field.
Update the ipu3, raspberrypi and rkisp1 IPAs to use
IPACameraSensorInfo::minLineLength instead of
IPACameraSensorInfo::lineLength, as logically we will always want to use
the fastest sensor readout by default.
Since the IPAs now use minLineLength for their calculations, set the
starting value of the V4L2_CID_HBLANK control to its minimum in
CameraSensor::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Private members of the FrameBuffer class are split between FrameBuffer
and FrameBuffer::Private. There was no real justification for this
split, and keeping some members private in the FrameBuffer class causes
multiple issues:
- Future modifications of the FrameBuffer class without breaking the ABI
may be more difficult.
- Mutable access to members that should not be modified by applications
require a friend statement, or going through the Private class.
Move all remaining private members to the Private class to address the
first issue, and add a Private::metadata() function to address the
second problem.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
utils::defopt causes compilation issues on gcc 8.0.0 to gcc 8.3.0,
likely due to bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86521
that was fixed in gcc 8.4.0. gcc 8.3.0 may be considered old (libcamera
requires gcc-8 or newer), but it is shipped by Debian 10 that has LTS
support until mid-2024.
As no workaround has been found to fix compilation on gcc 8.3.0 while
still retaining the functionality of utils::defopt, remove it from the
libcamera base library. This change could be reverted once support for
gcc-8 will be dropped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ControlList::set() function overload used for array controls
constructs a Span from an initializer list. It doesn't specify the Span
size explicitly, which results in a dynamic extent Span being
constructed. That causes a compilation failure for fixed-size array
controls, as they are defined as Control<T> with T being a fixed-extent
Span, and conversion from a dynamic-extent to fixed-extent Span when
calling ControlValue::set() can't be implicit.
Fix this by constructing the Span using the size of the control, which
resolves to a fixed-extent and dynamic-extent Span for fixed-size and
dynamic-size array controls respectively. The ControlList::set()
function that takes an initializer list can then be used for fixed-size
array controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The REGISTER_PIPELINE_HANDLER() macro defines a class type that inherits
from the PipelineHandlerFactory class, and implements a constructor and
a createInstance() function. Replace the code generation through macro
with the C++ equivalent, a class template, as done in libipa with the
Algorithm and CameraSensorHelper factories.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Avoid naked pointer with memory allocation by returning a unique_ptr
from PipelineHandlerFactory::createInstance(), in order to increase
memory allocation safety.
This allows iterating over factories in the CameraManager and unit tests
using const pointers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The PipelineHandlerFactory::registerType() function is called by the
PipelineHandlerFactory class only. Make it private.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The PipelineHandlerFactory::create() function has no need to modify the
factory instance. Make it const, as well as the createInstance()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraManager::get() function takes a string containing the ID of
the requested camera. This is correctly documented and implemented in
the .cpp file, but the header file names the parameter 'name' instead of
'id'. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Most headers imported from Android have an SPDX tag (added manually in
commit 190bebef0840), but four headers that have been imported more
recently are missing license identifiers. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The default ControlInfo constructor allows partially initialising the
min/max/def values. Uninitialised values are assigned to 0 by default.
This implicit initialisation makes it impossible to distinguish between
an uninitialised and an explicitly 0-initialised ControlValue.
Default construct the ControlValue in the ControlInfo default contructor to
explicitly represent uninitialised values by the ControlTypeNone type.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The min/max/def ControlValue of a ControlInfo can take arbitrary types that
are different from each other and different from the ControlId type.
The serialiser serialises these ControlValue separately by their type but
does not store the type. The deserialiser assumes that ControlValue types
match the ControlId type. If this is not the case, deserialisation will try
to deserialise values of the wrong type.
Fix this by serialising each of the min/max/def ControlValue's ControlType
and storing it just before the serialised ControlValue.
Fixes: https://bugs.libcamera.org/show_bug.cgi?id=137
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on
pixel format") has introduced a warning when trying to convert a color
space from V4L2 to libcamera if the media bus code is unknown. This was
meant to catch unknown image formats, but turned out to be also
triggered for metadata formats.
Color spaces are not applicable to metadata formats, there should thus
be no warning. Fix it by skipping the color space translation and
returning std::nullopt directly if the kernel reports
V4L2_COLORSPACE_DEFAULT. This doesn't introduce any change in behaviour
other than getting rid of the warning, as the V4L2Device::toColorSpace()
function returns std::nullopt already in that case.
Fixes: e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on pixel format")
Reported-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The CameraConfiguration::validateColorSpaces() function performs color
space validation on a camera configuration, by validating the color
space of each stream individually, and optionally ensuring that all
streams share the same color space. The individual validation is very
basic, limited to ensuring that raw formats use a raw color space.
Color spaces are more constrained than that:
- The Y'CbCr encoding and quantization range for RGB formats must be
YcbcrEncoding::None and Range::Full respectively.
- The Y'CbCr encoding for YUV formats must not be YcbcrEncoding::None.
Instead of open-coding these constraints in the validateColorSpaces()
function, create a new ColorSpace::adjust() function to centralize color
space validation and adjustment, and use it in validateColorSpaces().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Wrap V4L2Device::toColorspace() inside a private static member
function in V4L2VideoDevice class. It improves readability in
setting the colorspace for V4L2DeviceFormat.
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
V4L2 has no "none" YCbCr encoding, and thus reports an encoding for all
formats, including RGB and raw formats. This causes the libcamera
ColorSpace to report incorrect encodings for non-YUV formats. Fix it by
overriding the encoding reported by the kernel to YCbCrEncoding::None
for non-YUV pixel formats and media bus formats.
Similarly, override the quantization range of non-YUV formats to full
range, as limited range isn't used for RGB and raw formats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Request::Private::reuse() is different from Request::reuse().
It resets the members of Request::Private to default values hence,
rename it to a more appropriate Request::Private::reset().
Update the usage and documentation accordingly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a pointer-to-member is passed to the Signal::connect() function with
arguments that don't match the Signal type, the pointer-to-member
version of connect() will not match during template argument resolution,
but the functor version will. This results in a compilation error in the
BoundMethodFunctor class, due to the pointer-to-member not being a
functor and thus not being callable directly. The error messages are
quite cryptic. With the following error applied,
diff --git a/test/signal.cpp b/test/signal.cpp
index 5c6b304dac0b..6dd11ac45313 100644
--- a/test/signal.cpp
+++ b/test/signal.cpp
@@ -107,6 +107,7 @@ protected:
/* Test signal emission and reception. */
called_ = false;
signalVoid_.connect(this, &SignalTest::slotVoid);
+ signalVoid_.connect(this, &SignalTest::slotInteger1);
signalVoid_.emit();
if (!called_) {
gcc outputs
../../include/libcamera/base/bound_method.h: In instantiation of ‘R libcamera::BoundMethodFunctor<T, R, Func, Args>::activate(Args ..., bool) [with T = SignalTest; R = void; Func = void (SignalTest::*)(int); Args = {}]’:
../../include/libcamera/base/bound_method.h:143:4: required from here
../../include/libcamera/base/bound_method.h:146:37: error: must use ‘.*’ or ‘->*’ to call pointer-to-member function in ‘((libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>*)this)->libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::func_ (...)’, e.g. ‘(... ->* ((libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTes
t::*)(int)>*)this)->libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::func_) (...)’
146 | return func_(args...);
| ~~~~~^~~~~~~~~
and clang isn't much better:
../../include/libcamera/base/bound_method.h:146:11: error: called object type 'void (SignalTest::*)(int)' is not a function or function pointer
return func_(args...);
^~~~~
../../include/libcamera/base/bound_method.h:137:2: note: in instantiation of member function 'libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::activate' requested here
BoundMethodFunctor(T *obj, Object *object, Func func,
^
../../include/libcamera/base/signal.h:80:27: note: in instantiation of member function 'libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::BoundMethodFunctor' requested here
SignalBase::connect(new BoundMethodFunctor<T, void, Func, Args...>(obj, nullptr, func));
^
../../test/signal.cpp:110:15: note: in instantiation of function template specialization 'libcamera::Signal<>::connect<SignalTest, void (SignalTest::*)(int), nullptr>' requested here
signalVoid_.connect(this, &SignalTest::slotInteger1);
^
Improve error reporting by disabling the functor version of connect()
when the Func argument isn't invocable with the Signal arguments. gcc
will then complain with
../../test/signal.cpp:110:36: error: no matching function for call to ‘libcamera::Signal<>::connect(SignalTest*, void (SignalTest::*)(int))’
110 | signalVoid_.connect(this, &SignalTest::slotInteger1);
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and clang with
../../test/signal.cpp:110:15: error: no matching member function for call to 'connect'
signalVoid_.connect(this, &SignalTest::slotInteger1);
~~~~~~~~~~~~^~~~~~~
which are more readable.
This change requires usage of std::is_invocable<>, which is only
available starting in C++17. This is fine for usage of the Signal class
within libcamera, as the project is compiled with C++17, but we try to
keep the public API compatible C++14. Condition the additional checks
based on the C++ version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a ColorSpace:fromString() function to parse a string into a color
space. The string can either contain the name of a well-known color
space, or four color space components separate by a '/' character.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The StringSplitter::iterator is used with the utils::split() function to
iterate over components of a split string. Add the necessary member
types expected by std::iterator_trait in order to satisfy the
LegacyInputIterator requirement and make the iterator usable in
constructors for various containers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The JPEG color space is badly name, as the JPEG specification (ITU-T
T.81) doesn't define any particular color space:
The interchange format does not specify a complete coded image
representation. Application-dependent information, e.g. colour
space, is outside the scope of this Specification.
The JFIF specification (ITU-T T.871) is clearer as it requires ITU-R
BT.601 YCbCr encoding and a full quantization range:
The interpretations of Y, CB, and CR are derived from the E'Y, E'Cb,
and E'Cr signals defined in the 625-line specification of Rec. ITU-R
BT.601, but these signals are normalized so as to permit the usage of
the full range of 256 levels of the 8-bit binary encoding of the Y
component.
It however doesn't specify color primaries or a transfer function
explicitly. It only mentions the latter when describing the conversion
from YCbCr to RGB:
The inverse relationship for computing full scale 8-bit per colour
channel gamma pre-corrected RGB values (following Rec. ITU-R BT.601
gamma pre-correction and colour primary specifications) from YCbCr
colours (with 256 levels per component) can be computed as follows:
[...]
Given that ITU-R BT.601-5 (1995) didn't specify color primaries or a
transfer function, and that the later ITU-R BT.601-7 (2011) version
specifies color primaries for the 625-line variant that do not match
sRGB, the JPEG color space in libcamera is badly named. This is
confirmed by ITU-T T.871:
As this Recommendation | International Standard is based on the prior
informally-circulated JFIF version 1.02 specification that was
produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR
601), it references that specification for definition of the E'Y,
E'Cb, and E'Cr signals that correspond to the YCBCR values specified
herein. However, since the development of the prior JFIF version 1.02
specification, additional industry specifications have been developed,
Rec. ITU-R BT.601 has been updated, and common industry practice has
emerged which often follows the sYCC specification in IEC
61966-2-1/Amd.1. The difference between the use of the colour
interpretation specification in this Recommendation | International
Standard and that of the sYCC specification may be considered
negligible in practice.
Rename the color space to sYCC, as its definition matches the sYCC
standard, and indicate that it is typically used to encode JPEG images.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The YamlObject::get() function template is implemented for 16-bit and
32-bit integers. Add an 8-bit specialization that will be used in the
rkisp1 IPA module, and extend the unit tests accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The message.h and mutex.h headers are not used in the libcamera public
API. Make them private to avoid there usage in applications, and to
prevent having to maintain them with a stable ABI.
As mutex.h is used by libcamerasrc, the GStreamer element must switch
from the libcamera_public to the libcamera_private dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera implements a pipeline handler locking mechanism based on
advisory locks on media devices, to prevent concurrent access to cameras
from the same pipeline handler from different processes (this only works
between multiple libcamera instances, as other processes won't use
advisory locks on media devices).
A side effect of the implementation prevents multiple cameras created by
the same pipeline handler from being used concurrently. Fix this by
turning the PipelineHandler lock() and unlock() functions into acquire()
and release(), with a use count to replace the boolean lock flag. The
Camera class is updated accordingly.
As a consequence of this change, the IPU3 pipeline handler will fail to
operate properly when the cameras it exposes are operated concurrently.
The android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview
test fails as a result. This should be fixed in the IPU3 pipeline
handler to implement mutual exclusion between cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Commit f25ad4a2b16b ("libcamera: formats: Reimplement V4L2
PixelFormatInfo::info()") changed the PixelFormatInfo::info(const
V4L2PixelFormat &format) function overload to:
return info(format.toPixelFormat());
As part of the series that contains such commit, the PixelFormatInfo for the
pixel format applied to a video device is now retrieved at
V4L2VideoDevice::open() time. Some video devices register formats not
available to applications, for example metadata formats or, in the case
of ISP devices, formats to describe the ISP statistics and parameters.
This causes the
format.toPixelFormat()
call to output a WARN message, which spams the log and unnecessarily alerts
the users.
Augment V4L2PixelFormat::toPixelFormat() with an optional argument to
suppress warnings in the case a V4L2 pixel format is not known, to
restore the behaviour preceding commit f25ad4a2b16b and returns an
invalid PixelFormatInfo without outputting any unnecessary warning
message.
Fixes: f25ad4a2b16b ("libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Support verify IPA signatures with openssl as an alternative to gnutls,
to offer more flexibility in the selection of dependencies. Use gnutls
by default, for no specific reason as both are equally well supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Define Span types explicitly as either variable- or fixed-sized. This
introduces a new convention for defining Span dimensions in the property
and control value definitions and generates Span types as variable-sized
Span<T> or as fixed-sized Span<T,N>.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently the pipeline handler advertises controls handled by the IPA
from a ControlInfoMap it manually constructs. This is wrong, as the IPA
module is the component that knows what controls it supports. Fix this
by moving the ControlInfoMap construction to the IPA module, and pass it
to the pipeline handler as a return value from the IPA init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
|
|
Extend the V4L2Subdevice class to support getting and setting routing
tables.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Collect subdev capabilities at open() time.
Model the V4L2SubdevCapabilties as V4L2Capability from the video
device class.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2Subdevice::Whence enumerations defines two values that should
correspond to the V4L2_SUBDEV_FORMAT_ACTIVE and V4L2_SUBDEV_FORMAT_TRY
definitions.
The V4L2 symbols are defined as:
V4L2_SUBDEV_FORMAT_TRY = 0,
V4L2_SUBDEV_FORMAT_ACTIVE = 1,
While the libcamera defined enumeration is:
enum Whence {
ActiveFormat,
TryFormat,
}
As V4L2Subdevice::Whence values are used to populate data types
defined in v4l2-subdev.h used as arguments to VIDIOC_SUBDEV_*
ioctls, the V4L2Subdevice class is required to adjust their value as:
subdevFmt.which = whence == ActiveFormat ? V4L2_SUBDEV_FORMAT_ACTIVE
: V4L2_SUBDEV_FORMAT_TRY;
Drop the adjustment by defining :
Whence::TryFormat = V4L2_SUBDEV_FORMAT_TRY;
Whence::ActiveFormat = V4L2_SUBDEV_FORMAT_ACTIVE;
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2 subdev internal routing API is under development. Add it
manually to the v4l2-subdev.h kernel header for now.
The code corresponds to the "[PATCH v11 00/36] v4l: routing and streams
support" series as posted to the linux-media mailing list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
These YUV 4:4:4 packed formats are used by the ISI driver. Add them to
videodev2.h.
This is merged in the upstream kernel as 00f6842ef41d ("media: v4l: Add
packed YUV 4:4:4 YUVA and YUVX pixel formats").
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add FourCCs for the YUV 4:4:4 packed formats AVUY8888 and XVUY8888.
This is merged in the upstream kernel as 53618649ca6d ("drm/fourcc: Add
formats for packed YUV 4:4:4 AVUY and XVUY permutations").
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update kernel headers to v5.19 using utils/update-kernel-headers.sh and
re-instating libcamera local modifications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that V4L2PixelFormat::fromPixelFormat() returns a list of formats
to chose from, select the one supported by the video device by matching
against the list of supported pixel formats.
The first format found to match one of the device supported ones is
returned.
As the list of pixel formats supported by the video device does not
change at run-time, cache it at device open() time. Maximize the
lookup efficiency by storing the list of supported V4L2PixelFormat in an
std::unordered_set<>.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Inject a specialization of std::hash<> for the V4L2PixelFormat class in
the std namespace to make it possible to store instances of the class in
the std::unordered_map and std::unordered_set containers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Multiple V4L2 formats can be associated with a single PixelFormat.
Now that users of V4L2PixelFormat::fromPixelFormat() have been converted
to use V4L2VideoDevice::toV4L2PixelFormat(), return the full list of
V4L2 formats in order to prepare to match them against the ones
supported by the video device.
The V4L2 compatibility layer, not having any video device to interact
with, is converted to use the first returned format unconditionally.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
This is a partial revert of commit 395d43d6d75b ("libcamera:
v4l2_videodevice: Drop toV4L2PixelFormat()")
The function was removed because it incorrectly maps non-contiguous V4L2
format variants (ie V4L2_PIX_FMT_YUV420M) to the API version supported
by the video device (singleplanar API and multiplanar API). It was
decided at the time to remove the function and let its users call
directly V4L2PixelFormat::fromPixelFormat() which accepts a
'multiplanar' flags.
As we aim to associate multiple V4L2PixelFormat to a single libcamera
format, the next patches will verify which of them is actually supported
by the video device. For now, return the contiguous version
unconditionally.
Re-introduce V4L2VideoDevice::toV4L2PixelFormat() and convert all
the V4L2PixelFormat::fromPixelFormat() users to use it.
The V4L2 compatibility layer is the only outlier as it doesn't have a
video device to poke, hence it still uses
V4L2PixelFormat::fromPixelFormat().
Next patches will implement the device format matching logic and handle
the non-contiguous plane issue in V4L2VideoDevice::toV4L2PixelFormat().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
To each libcamera PixelFormat two V4L2 formats are associated, the
'single' and 'multi' format variants.
The two versions list plane contiguous and non-contiguous format
variants, and an optional argument to V4L2PixelFormat::fromPixelFormat()
was used to select which one to pick.
In order to prepare to remove V4L2PixelFormat::fromPixelFormat(), and
considering that no caller in the codebase uses the non-contiguous
format variant, merge the two formats vectors in a single one and
default the selection to the first available one, which is functionally
equivalent to what is currently implemented.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Usage of the std::enable_if_t type doesn't need to be prefixed by
typename. Drop the unnecessary keyword.
Reported-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To improve the kernel interface, a proposal has been made to the
linux-kernel [1] to improve the configuration of the Defective Pixel
Cluster Correction (DPCC).
[1] https://lore.kernel.org/linux-media/20220616160456.21549-1-laurent.pinchart@ideasonboard.com/
Update the local copy of the rkisp1-config.h to match the proposal.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
usage
The std::optional<T>::value_or(U &&default_value) function returns the
contained value if available, or default_value if the std::optional has
no value. If the desired default value is a default-constructed T, the
obvious option is to call std::optional<T>::value_or(T{}). This approach
has two drawbacks:
- The \a default_value T{} is constructed even if the std::optional
instance has a value, which impacts efficiency.
- The T{} default constructor needs to be spelled out explicitly in the
value_or() call, leading to long lines if the type is complex.
Introduce a defopt variable that solves these issues by providing a
value that can be passed to std::optional<T>::value_or() and get
implicitly converted to a default-constructed T.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow to retrieve a YAML list of any already supported types in a
std::vector.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
