| Age | Commit message (Collapse) | Author |
|---|
|
The uvcvideo driver needs to open / close its /dev/video# node from
pipe_->acquireDevices() / pipe_->releaseDevices().
V4L2VideoDevice::open() creates an EventNotifier and this notifier needs
to be created from the CameraManager thread.
Use invokeMethod() for pipe_->acquire() and pipe_->release() so that the
EventNotifiers are created from the CameraManager thread context.
Running pipe_->acquire() and pipe_->release() from the CameraManager
thread context serializes all calls to them. Drop PipelineHandler::lock_
this now is no longer necessary and update the "\context" part of the
documentation for acquire[Device]() and release[Device]() to match.
Note the delayed opening of /dev/video# is a special case because the
kernel uvcvideo driver powers on the USB device as soon as /dev/video#
is opened. This behavior should *not* be copied by other pipeline
handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera always keeps all /dev/video# and /dev/v4l2_subdev# nodes for a
pipeline open after enumerating the camera.
This is a problem for the uvcvideo pipeline handler. Keeping /dev/video#
open stops the UVC USB device from being able to enter runtime-suspend
causing significant unnecessary power-usage.
Add a stub acquireDevice() function to the PipelineHandler class which
pipeline handlers can override.
The uvcvideo pipeline handler will use this to delay opening /dev/video#
until the device is acquired. This is a special case because the kernel
uvcvideo driver powers on the USB device as soon as /dev/video# is
opened. This behavior should *not* be copied by other pipeline handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ISP parameters buffer currently has a fixed payload size, which is
hardcoded in the pipeline handler. To prepare for support of the
extensible parameters format that has a variable payload size, pass the
size from the IPA module to the pipeline handler explicitly. Keep the
size hardcoded to sizeof(struct rkisp1_params_cfg) for now, this will be
udpated later.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The rkisp1 driver supports two formats for the ISP parameters buffer,
the legacy fixed format and the new extensible format. In preparation of
support for the new format, pass the parameters buffer format from the
pipeline handler to the IPA module and store it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Update the kernel headers with the definitions for the rkisp1 extensible
parameters format.
The headers have been generated from the most recent linux-media stage
tree master branch, at commit a043ea54bbb9 ("Merge tag
'next-media-rkisp1-20240814' of
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git").
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The ControlEnum and Control helper classes defined in gen-controls.py
are useful for other generator scripts. Move them to a separate file to
make it possible to share them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Jinja2 templates help separate the logic related to the template from
the generation of the data. The python code becomes much clearer as a
result.
As an added bonus, we can use a single template file for both controls
and properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The libcamera.h header is a top-level library header that contains every
other libcamera header. It is currently generated by listing the files
in include/libcamera/ and dropping the .in suffix from template files.
This assumes a 1:1 mapping between generated header file names and the
name of their templates.
Drop that assumption and base the libcamera.h generation on the
libcamera public headers listed in meson.build. This makes the
libcamera.h header generation more future-proof.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Python scripts run as part of the build process need to take a few
actions specific to the environment in which they operate. One of those
is disabling the Python bytecode cache, to avoid writing .pyc files to
the source tree. This is done manually in the IPC generate.py and
parser.py scripts.
The current implementation is not ideal because it hardcodes in the
scripts information related to the environment in which they operate. As
those scripts are part of libcamera this is more of a theoretical issue
than a practical one. A second issue is that future Python scripts will
need to duplicate similar mechanisms, resulting in a higher maintenance
burden.
Address the issue with a different approach, by creating a meson
environment for the Python scripts, and passing it to the
custom_target() functions. The environment only disables the bytecode
cache for now.
The diffstat shows an increase in code size. This is expected to be
offset by usage of the environment for more Python scripts, as well as
support of more variables in the environment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We have multiple code generation scripts in utils/, mixed with other
miscellaneous utilities, as well as a larger code base based on mojom in
utils/ipc/. To make code sharing easier between the generator scripts,
without creating a mess in the utils/ directory, move all the code
generation code to utils/codegen/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When generating control headers, the YAML files to be used are
determined dynamically based on the selected pipeline handlers. As part
of this process, the build system populates an array of meson File
objects used as an input for the control headers generation custom
target, as well as an array of file names (as strings). The file names
array is later used to generate the control source files for the
libcamera core, as well as the source code for controls support in the
Python bindings.
Both of the source code generators manually turn the array of file names
into File objects. This duplicates code and reduces readability. A third
similar implementation has also been proposed to generate control
support sources in the GStreamer element, making the issue worse.
To simplify this, store File objects instead of file names in the
controls_files array. As the meson configuration summary doesn't support
File objects, create a separate controls_files_names to store the file
names for that sole purpose.
The exact same process occurs for properties, address them the same way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The libcamera coding style groups the C and C++ standard library headers
in a single group. Fix the few offenders in the source tree.
While at it, add a missing blank line between header groups in a
separate location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Without the change the build fails on upcoming `gcc-15` as:
In file included from ../src/libcamera/yaml_parser.cpp:8:
../include/libcamera/internal/yaml_parser.h:183:41: error: 'uint8_t' was not declared in this scope
183 | std::is_same_v<uint8_t, T> ||
| ^~~~~~~
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Without the change the build fails on upcoming `gcc-15` as:
In file included from ../src/libcamera/base/file.cpp:8:
../include/libcamera/base/file.h:62:33: error: 'uint8_t' was not declared in this scope
62 | ssize_t read(const Span<uint8_t> &data);
| ^~~~~~~
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The IPAManager class implements a singleton pattern due to the need of
accessing the instance in a static member function. The function now
takes a pointer to a PipelineHandler, which we can use to access the
CameraManager, and from there, the IPAManager.
Add accessors to the internal API to expose the CameraManager from the
PipelineHandler, and the IPAManager from the CameraManager. This
requires allocating the IPAManager dynamically to avoid a loop in
includes. Use those accessors to replace the IPAManager singleton.
Update the IPA interface unit test to instantiate a CameraManager
instead of an IPAManager and ProcessManager, to reflect the new way that
the IPAManager is accessed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera_tracepoint_header variable stores the tracepoints.h header
custom target, for the sole purpose of being listed as a source of the
libcamera shared library, through the libcamera_internal_sources
variable.
Add the tracepoints.h header to libcamera_internal_headers instead of
libcamera_internal_sources, and list libcamera_internal_headers as a
source of the shared library, alongside libcamera_internal_sources. This
makes libcamera_internal_sources contain sources only, improving clarity
of the build system variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ipa_data_serializer.h and ipc_pipe.h headers are missing from
libcamera_internal_headers. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA headers are listed in two different meson variables, one for
generated headers, and one for the other headers. There's no real reason
for this split, consolidate all of them in the libcamera_ipa_headers
variable.
While at it, don't add the IPA headers to the libcamera_internal_sources
variable, but list libcamera_ipa_headers in the sources for the shared
library. This moves the libcamera_internal_sources variable towards
holding source files, not header files, to improve clarity of the build
system.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The generated version.h header is part of the public headers, but is
missing from the libcamera_public_headers variable. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the configuration file for an IPA module is missing, it is reported
as an error in the log, for example:
ERROR IPAProxy ipa_proxy.cpp:149 Configuration file 'imx219.yaml' not found for IPA module 'simple'
This is misleading because several pipelines use uncalibrated.yaml in
such a case and can continue working. And in case of software ISP,
there is currently no other configuration file so the error is always
reported.
On the other hand, in some other cases the presence of the configuration
file is required and it is an error if it is missing.
Let's introduce a new optional argument to IPAProxy::configurationFile
that specifies a fallback file if the requested file is not found. If
the primary requested file is not found and a non-empty fallback file is
specified then a warning is logged and the fallback file is looked up.
If neither the fallback file can be found then only then an error is
logged and the method returns an empty string. This change has also the
benefit of putting the common fallback file ("uncalibrated.yaml")
pattern to a single place.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The argument name is different in the declaration and the definition.
Let's use the same one in both, namely `name'.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera creates memfds in two locations already, duplicating some
code. Move the code to a new MemFd helper class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The utils::hex() function is implemented for 32-bit and 64-bit integers,
but not for 8-bit and 16-bit. This causes a link error (possibly at
runtime for IPA modules due to lazy linking) when trying to print 8-bit
or 16-bit integers. Implement additional specializations to fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The converter interface uses the unsigned int output stream index to map
to the output frame buffers. This is cumbersome to implement new
converters because one has to keep around additional book keeping
to track the streams with their correct indexes.
The v4l2_converter_m2m and simple pipeline handler are adapted to
use the new interface. This work roped in software ISP as well,
which also seems to use indexes (although it doesn't implement converter
interface) because of a common conversionQueue_ queue used for
converter_ and swIsp_.
The logPrefix is no longer able to generate an index from a stream, and
is updated to be more expressive by reporting the stream configuration
instead, for example, reporting "1920x1080-MJPEG" in place of
"stream0".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> # sm8250 RB5
|
|
Rename the private Stream class from V4L2M2MConverter::Stream to
V4L2M2MConverter::V4L2M2MStream. This is done to improve readability
of the code when we drop the handling of stream by indexes in a
subsequent patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The ipaCreate() function is the entry point to IPA modules. It is
declared in ipa_interface.h, and defined by each module. As the function
is defined with extern "C" linkage, the namespace in which it is
contained is not very relevant from a caller's point of view. For the
IPA module implementer, however, defining the function in the libcamera
namespace avoids adding an explicit libcamera:: prefix to the symbols
used by the function. This is why all IPA modules define their
ipaCreate() entry point in the libcamera namespace.
The ipa_interface.h file, however, declares the function in the global
namespace. This doesn't cause any issue at runtime, but will cause a
missing declaration warning when we enable them. To prepare for that,
move the function declaration to the libcamera namespace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera will enable -Wmissing-declarations to catch mismatches between
function declarations and definitions. There is one offender in log.h:
when a category is defined with LOG_DEFINE_CATEGORY(), it generates a
function with no declaration. Fix it by declaring the function using
LOG_DECLARE_CATEGORY() as the first step of the category definition.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The YamlObject::get<T>() function template has a specialization for
double but not for float. When used in an IPA module, the issue is
caught at module load time only, when dynamic links are resolved,
causing errors such as
Failed to open IPA module shared object: /usr/lib/libcamera/ipa_rkisp1.so: undefined symbol: _ZNK9libcamera10YamlObject6GetterIfE3getERK_
Fix it by adding a float specialization. The alternative would be to use
double only in IPA modules, but the lack of enforcement at compile time
makes this dangerous.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The YamlObject::get() function is a function template that gets fully
specialized for various types. This works fine for non-template types,
but specializing it for template types (e.g. a std::vector<U>) would
require partial template specialization, which C++ allows for classes
and variables but not functions.
To work around this problem, delegate the implementation to a new
YamlObject::Getter structure template, which will support partial
specialization.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The YamlObject::get() function template is implemented for a set of
basic types through template specializations. The function declaration
uses std::enable_if_t<> guards to signal incorrect usage at compilation
time. This however prevents the API to be extended with additional
specializations in other compilation units.
To prepare for new specializations of the function for the ipa::Vector
and ipa::Pwl classes types, implemented in their respective compilation
units, drop the std::enable_it_t<> guards. Incorrect usage will still be
reported as link errors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This way the construction of the default value of type `T`
can be delayed until it is really needed, which is useful,
for example when `T == std::string` and the default value comes
from a string literal, as the default value string would always
be constructed otherwise, even if not needed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The dma-buf allocator currently allocates from CMA and system heaps.
Extend the dma-buf allocator to support allocating dma-buffers by creating
memfd-s and turning those into dma-buffers using /dev/udmabuf.
The buffers allocated through memfd/udmabuf are not suitable for zero-copy
buffer sharing with other devices.
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Users of the DmaHeap class really just want some way to allocate
dma-buffers from userspace. This can also be done by using /dev/udmabuf
instead of using /dev/dma_heap/*.
Rename DmaHeap class to DmaBufAllocator in preparation of adding
/dev/udmabuf support.
And update the DmaHeap class docs to match including replacing references
to "dma-heap type" with "dma-buf provider".
This is a pure automated rename on the code ('s/DmaHeap/DmaBufAllocator/')
+ file renames + doc updates. There are no functional changes.
The DmaBufAllocator objects in vc4.cpp and software_isp.cpp are left named
dmaHeap_ to keep the changes to those 2 files to a minimum.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The subdev embedded data support series includes a change to the
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING ioctls that impacts
the userspace API.
Update to the new API, while preserving backward compatibility to ease
the transition. Document the backward compatibility to only be supported
for two kernel releases. As the routing API isn't enabled in any
upstream kernel yet, users of the API need kernel patches, and are
expected to be able to upgrade quickly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Updated kernel headers to v6.10-rc1 using utils/update-kernel-headers.sh
and re-instating libcamera local modifications.
This includes adding include/linux/udmabuf.h which was not part
of libcamera's include/linux headers before.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constant is used in a single place internally and doesn't belong to
DebayerParams anymore. Let's use 256 directly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Constructing the color mapping tables is related to stats rather than
debayering, where they are applied. Let's move the corresponding code
to stats processing.
The same applies to the auxiliary gamma table. As the gamma value is
currently fixed and used in a single place, with the temporary exception
mentioned below, there is no need to share it anywhere anymore.
It's necessary to initialize SoftwareIsp::debayerParams_ to default
values. These initial values are used for the first two frames, before
they are changed based on determined stats. To avoid sharing the gamma
value constant in artificial ways, we use 0.5 directly in the
initialization. This all is not a particularly elegant thing to do,
such a code belongs conceptually to the similar code in stats
processing, but doing better is left for larger refactoring.
This is a preliminary step towards building this functionality on top of
libipa/algorithm.h, which should follow.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2:
- V4L2_PIX_FMT_PISP_COMP1_xxx
- V4L2_PIX_FMT_PISP_COMP2_xxx
Add the Raspberry Pi 5 PiSP Frontend and Backend config formats:
- V4L2_META_FMT_RPI_FE_CFG
- V4L2_META_FMT_RPI_BE_CFG
Add the Raspberry Pi 5 PiSP Frontend statistics format:
- V4L2_META_FMT_RPI_FE_STATS
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2:
- V4L2_PIX_FMT_PISP_COMP1_xxx
- V4L2_PIX_FMT_PISP_COMP2_xxx
Add the Raspberry Pi 5 PiSP Frontend and Backend config formats:
- V4L2_META_FMT_RPI_FE_CFG
- V4L2_META_FMT_RPI_BE_CFG
Add the Raspberry Pi 5 PiSP Frontend statistics format:
- V4L2_META_FMT_RPI_FE_STATS
The corresponding changes submitted to the linux-media mailing list can
be found at:
(series "media: raspberrypi: Add support for PiSP Back End")
https://lore.kernel.org/linux-media/20240502110503.38412-4-jacopo.mondi@ideasonboard.com/
https://lore.kernel.org/linux-media/20240502110503.38412-5-jacopo.mondi@ideasonboard.com/
and for the DRM mailing at:
(patch "[RFC] drm/fourcc: Add RPI modifiers")
https://lore.kernel.org/dri-devel/20240226153854.99471-1-jacopo.mondi@ideasonboard.com/
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 16-bps (48-bpp) RGB output formats in the uapi headers.
These new formats are defined for the RGB and BGR ordering.
The corresponding change submitted to the linux-media and DRM mailing
lists can be found at:
https://lore.kernel.org/linux-media/20240502110503.38412-3-jacopo.mondi@ideasonboard.com/
and
https://lore.kernel.org/dri-devel/20240226132544.82817-1-jacopo.mondi@ideasonboard.com/
respectively.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To match the enumerated media devices, each registered pipeline handler
is used in no specific order. It is a limitation when several pipelines
can match the devices, and user has to select a specific pipeline.
For this purpose, environment variable LIBCAMERA_PIPELINES_MATCH_LIST is
created to give the option to define an ordered list of pipelines to
match on.
LIBCAMERA_PIPELINES_MATCH_LIST="<name1>[,<name2>[,<name3>...]]]"
Example:
LIBCAMERA_PIPELINES_MATCH_LIST="rkisp1,simple"
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a static helper to the PipelineHandlerFactoryBase class to
allow retrieving a pipeline by name.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PipelineHandlerFactoryBase class has a name that is propagated to
the PipelineHandler instance it creates.
In present implementation, this name comes from the
REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the
stringified name of the PipelineHandler derived class. Therefore,
PipelineHandler factories and instances names can be quite long such as
"PipelineHandlerRkISP1".
A libcamera user may have to explicitly refer to a PipelineHandler name
for configuration purpose: one usage of the name can be to define a
pipeline handlers match list and their priorities. It is desired, for
user convenience, to use a short name to designate a pipeline handler.
Reusing the short pipeline names already defined in the meson option
files is an existing and consistent way of naming pipelines.
This change adds an explicit name parameter to the
REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to
define the name of a pipeline handler factory, instead of the current
pipeline handler class name.
Each pipeline registration is updated accordingly. The short name
assigned corresponds to the pipeline directory name in the source tree.
It is consistent with pipelines names used in meson.
Changing the pipeline name has an impact on the IPA modules: each module
defines a IPAModuleInfo structure. This structure has a pipelineName
member defining the pipeline handler name it shall match with.
Therefore, each internal IPA module definition has to be changed to have
its IPAModuleInfo pipelineName name updated with the short pipeline
handler name.
In addition to this pipelineName member, the IPAModuleInfo structure
also has a name member, associated to the IPA module name. Having
renamed the pipelines to a short name, the pipeline name and the IPA
module names of the IPAModuleInfo structure are the same: for in-tree
IPA, they correspond to the respective pipeline and IPA subdirectories
in the source tree. However the IPA name could be different, for
instance with a close source IPA implementation built out-of-tree. Thus,
it makes sense to keep the IPA name in that structure, as the 2
definitions may not always be redundant.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust for clang-format style fix, reformat commitmsg]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in
template files and templates embedded in generator scripts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Generate maps for each control enum which associate strings that
represent the enum values with the values themselves. This change
will allow us to refer to enumerated control values using the
string. For example if we want to pass variables to an algorithm
for use when a control has a particular value we can embed within
tuning files a dictionary that uses the control values as keys.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are two places where "output" is spelled as "ouput".
Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Black may not be represented as 0 pixel value for given hardware, it may
be higher. If this is not compensated then various problems may occur
such as low contrast or suboptimal exposure.
The black pixel value can be either retrieved from a tuning file for the
given hardware, or automatically on the fly. The former is the right
and correct method, while the latter can be used when a tuning file is
not available for the given hardware. Since there is currently no
support for tuning files in software ISP, the automatic, hardware
independent way, is always used. Support for tuning files should be
added in future but it will require more work than this patch.
The patch looks at the image histogram and assumes that black starts
when pixel values start occurring on the left. A certain amount of the
darkest pixels is ignored; it doesn't matter whether they represent
various kinds of noise or are real, they are better to omit in any case
to make the image looking better. It also doesn't matter whether the
darkest pixels occur around the supposed black level or are spread
between 0 and the black level, the difference is not important.
An arbitrary threshold of 2% darkest pixels is applied; there is no
magic about that value.
The patch assumes that the black values for different colors are the
same and doesn't attempt any other non-primitive enhancements. It
cannot completely replace tuning files and simplicity, while providing
visible benefit, is its goal. Anything more sophisticated is left for
future patches.
A possible cheap enhancement, if needed, could be setting exposure +
gain to minimum values temporarily, before setting the black level. In
theory, the black level should be fixed but it may not be reached in all
images. For this reason, the patch updates black level only if the
observed value is lower than the current one; it should be never
increased.
The purpose of the patch is to compensate for hardware properties.
General image contrast enhancements are out of scope of this patch.
Stats are still gathered as an uncorrected histogram, to avoid any
confusion and to represent the raw image data. Exposure must be
determined after the black level correction -- it has no influence on
the sub-black area and must be correct after applying the black level
correction. The granularity of the histogram is increased from 16 to 64
to provide a better precision (there is no theory behind either of those
numbers).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
