| Age | Commit message (Collapse) | Author |
|---|
|
Since commit b48db3c489d3 ("libcamera: controls: Create ControlInfoMap
with ControlIdMap"), instances of the ControlInfoMap class need to be
created with an instance of an unordered_map of ControlId to ControlInfo
and with a ControlIdMap instance.
The pipeline handler developer guide was never updated to reflect the
change. Fix it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The documentation is effectively the same, but we should be pointing
to the actively supported and used Qt version.
Signed-off-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The language argument to the code-block directive was mandatory in
Sphinx before 2.0. Fix the few instances where no language is specified
to support older versions of Sphinx.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add some documentation to the pipeline handler file describing how to
implement and handle vendor specific controls and properties with a
small example.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for using separate YAML files for controls and properties
generation. The mapping of vendor/pipeline handler to control file is
done through the controls_map variable in include/libcamera/meson.build.
This simplifies management of vendor control definitions and avoids
possible merge conflicts when changing the control_ids.yaml file for
core and draft controls. With this change, libcamera and draft controls
and properties files are designated the 'libcamera' vendor tag.
In this change, we also rename control_ids.yaml -> control_ids_core.yaml
and property_ids.yaml -> property_ids_core.yaml to designate these as
core libcamera controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
reStructuredText requires list items to be indented. Fix the few
offenders in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that libcamera has an official code of conduct, mention it in the
'contributing' document with a clear indication that all community
members are expected to follow the code of conduct.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the boilerplate "[INSERT EMAIL ADDRESS]" contact information
with conduct@libcamera.org, and indicate that the people behind that
e-mail address can also be contacted directly if needed. The direct
contact information aims at offering more confidence to reporters than
an anonymous mail alias in case they wish to report an issue with one of
the core project members.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Contributor Covenant is covered by the CC-BY-4.0 license. Indicate
this in the file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All documentation in libcamera is in reStructuredText format. Convert
the code of conduct from Markdown. No change in the contents is
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Communities have standards regarding behaviours they consider acceptable
or not acceptable, and expect community members to follow those
standards. libcamera is no different, even if it has never clearly
expressed those standards in a formal code of conduct document.
Like software licenses, codes of conduct can be written in a myriad of
ways. And like software licenses, using a widely adopted code of conduct
instead of writing our own can help bringing clarity. One such standard
code of conduct is the Contributor Covenant, stewarded by the
Organization for Ethical Source.
The Contributor Covenant has been adopted by the freedesktop.org
organization, which hosts a large number of projects historically
related to graphics, and more recently to multimedia in general.
freedesktop.org offers services such as git hosting with CI, which
libcamera could benefit from. There is therefore a clear incentive to
choose the same code of conduct as freedesktop.org, and no known
drawback.
As a first step towards this, and to keep the libcamera code of conduct
history clear in git, copy the original Contributor Covenant v1.4 from
https://github.com/EthicalSource/contributor_covenant/. "v1.4" is
ambiguous as the document initially published as v1.4 has received small
(but sometimes significant) modifications over time. The version
imported here ([1]) is the most recent "v1.4", from tags/2.1 (commit
8a3be1350b07 "Merge pull request #979 from JustArchi/patch-2").
[1] https://github.com/EthicalSource/contributor_covenant/blob/2.1/content/version/1/4/code-of-conduct.md
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add figures in Documentation/rotation/ to document the plane
transformations defined by the Orientation enumeration.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a documentation page about the 'camera sensor model'
implemented by libcamera.
The camera sensor model serves to provide to applications a reference
description of the processing steps that take place in a camera sensor
in order to precisely control the sensor configuration through the
forthcoming SensorConfiguration class.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Sphinx 7.0.0 has dropped support for the deprecated 'style' variable
(https://github.com/sphinx-doc/sphinx/pull/11381). This breaks
compilation of the documentation:
/usr/bin/sphinx-build -D release=v0.1.0+16-eed6a079 -q -W -b html Documentation Documentation/html
Theme error:
An error happened in rendering the page api-html/index.
Reason: UndefinedError("'style' is undefined")
The recommended replacement is 'styles[-1]'. However, this resolves to
'_static/css/theme.css', which is part of the 'css_styles' variable, and
results in the stylesheet being included twice. To avoid that and fix
the compilation error, simply drop the first reference.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The meson style, which libcamera follows, recommends a space before
colons in function parameters. Fix the style violations through the
project.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
libcamera creates a config.h file with predefined macros, and instructs
the compiler to include it implicitly with the -include argument.
Doxygen has no support for implicit inclusion of headers, but has a
PREDEFINED configuration option for its preprocessor that lists
predefined macros. Populate it with the values from the config_h
configuration data object that is used for generate the config.h file,
to ensure that documentation matches the configuration options libcamera
has been built with.
Bump the minimum meson version to 0.57 to use cfg_data.keys().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change the parameter type of `generateConfiguration()` from `const std::vector&`
to `libcamera::Span`. A span is almost always preferable to a const vector ref
because it does not force dynamic allocation when none are needed, and it allows
any contiguous container to be used.
A new overload is added that accepts an initializer list so that
cam->generateConfiguration({ ... })
keeps working.
There is no API break since a span can be constructed from a vector
and the initializer list overload takes care of the initializer lists,
but this change causes an ABI break.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Apply checkstyle fixups]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow an arbitrary mapping between the pipeline handler and IPA mojom
interface file in the build system. This removes the 1:1 mapping of
pipeline handler name to mojom filename, and allows more flexibility to
pipeline developers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Both {Camera,PipelineHandler}::generateConfiguration() take a list
of `StreamRole` objects, and not a list of `StreamRoles` objects.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pipeline handler writers guide incorrectly references the
VividCameradata::init() impelementation with a spelling error.
Fix spelling of "impelementation" in the pipeline handler development
guide.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Out should really be output.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the ability to read the platform configuration parameters from a
config file provided by the user through the LIBCAMERA_RPI_CONFIG_FILE
environment variable. Use the PipelineHandler::configurationFile()
helper to determine the full path of the file.
Provide an example configuration file named example.yaml. Currently two
parameters are available through the json file:
"min_unicam_buffers" The minimum number of internal Unicam buffers to
allocate.
"min_total_unicam_buffers" The minimum number of internal + external
Unicam buffers that must be allocated.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Briefly document the optional requirement support for H/V flip controls.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Currently, doxygen is run by ninja in the top-level build directory,
therefore the "Documentation" folder is always created there. However,
when libcamera is built as a subproject, it should not touch the
top-level build directory because it can cause conflicts and because
the documentation won't be created where meson thinks it will be, so
the "doxygen" target will always be dirty and installation will fail.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All developers, whether junior or experienced, can benefit from
improving their commit message writing skills. Add a paragraph to the
contribution documentation to explain this, with a link to a good guide.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The CameraSensor class validates that the sensor driver in use supports
the controls required for IPA modules to work correctly.
For in-tree IPA modules, whose pipeline handlers already use
CameraSensor there's no need to validate such controls again.
Remove controls validation from the IPU3 and RkISP1 IPA modules and rely
on CameraSensor doing that at initialization time.
The list of mandatory controls is expanded to add V4L2_CID_ANALOGUE_GAIN
without which IPA modules cannot function.
The new requirement only applies to RAW sensors, platforms like UVC and
Simple are not impacted by this change.
While at it, expand the sensor driver requirements documentation to
include V4L2_ANALOGUE_GAIN in the list of mandatory controls a sensor
driver has to support.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera project is not yet ready to declare ABI nor API stability,
but it will benefit the community to be able to provide more regular
release cycles to determine 'versioned' points of history.
Ideally, these releases will be made at any ABI breakage, but can be
made at arbitary time based points along the way.
To support releases which may not be ABI stable, declare the soversion
of both the libcamera and libcamera-base library to be dependant upon
both the major minor and patch component of the project version.
As part of this, introduce a new 'Versions' summary section to highlight
the different version components that may become apparent within any
given build.
Bumping versions may leave dangling libcamera.so.* symlinks in build
directories. This will confuse Doxygen which will print during its
directory scanning phase a warning that the symlink can't be read. As we
don't need Doxygen to follow symlinks, disable it with EXCLUDE_SYMLINKS.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Two documentation files are missing SPDX headers. Add them, with the
CC-BY-SA-4.0 license that covers all the libcamera documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Align the style of Doxyfile.in with the `doxygen -g` output, to minimize
diffs in the future when updating the file with `doxygen -u`. This
includes
- Replacing tabs with spaces
- Replacing += with \ to continue lines
- Dropping the \ on the last line of an option
Also update the Doxygen version number to indicate that the file has
been updated to v1.9.5, even if no modification to the options in use
were needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Doxyfile.in was generated using `doxygen -g` with Doxygen v1.8.14. This
has produced a file with all options supported by Doxygen at the time,
and a handful of them have then been modified to support libcamera's
needs, with most options retaining their default.
Some of the default options have been deprecated in newer Doxygen
releases, which led to warnings when generating the documentation. The
usual process to fix this is to update the configuration file with
`doxygen -u`. This creates a big diff due to the large number of changes
to default options, which isn't quite nice. Instead, let's just drop all
the default options and the comments, to produce a small and more
readable Doxyfile.in.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is a partial revert of commit 395d43d6d75b ("libcamera:
v4l2_videodevice: Drop toV4L2PixelFormat()")
The function was removed because it incorrectly maps non-contiguous V4L2
format variants (ie V4L2_PIX_FMT_YUV420M) to the API version supported
by the video device (singleplanar API and multiplanar API). It was
decided at the time to remove the function and let its users call
directly V4L2PixelFormat::fromPixelFormat() which accepts a
'multiplanar' flags.
As we aim to associate multiple V4L2PixelFormat to a single libcamera
format, the next patches will verify which of them is actually supported
by the video device. For now, return the contiguous version
unconditionally.
Re-introduce V4L2VideoDevice::toV4L2PixelFormat() and convert all
the V4L2PixelFormat::fromPixelFormat() users to use it.
The V4L2 compatibility layer is the only outlier as it doesn't have a
video device to poke, hence it still uses
V4L2PixelFormat::fromPixelFormat().
Next patches will implement the device format matching logic and handle
the non-contiguous plane issue in V4L2VideoDevice::toV4L2PixelFormat().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Remove 4 rogue spaces from the pipeline developer guide.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In order to allow dynamic instantiation of algorithms based on tuning
data files, add a mechanism to register algorithms with the IPA module.
The implementation relies on an AlgorithmFactory class and a
registration macro, similar to the pipeline handler registration
mechanism. The main difference is that the algorithm registration and
instantiation are implemented in the Module class instead of the
AlgorithmFactory class, making the factory an internal implementation
detail.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Some title underlines don't match the title text. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Recent versions of Sphinx (> 5.0.0) have dropped support for the
'None' keyword as language specifier:
https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022
10474: language does not accept None as it value. The default value of
language becomes to 'en' now. Patch by Adam Turner and Takeshi
KOMIYA.
Causing a compile time warning:
WARNING: Invalid configuration value found: 'language = None'.
Update your configuration to a valid language code. Falling
back to 'en' (English).
Change the language setting to 'en' to silence the warning.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Event loop was moved to be a part of CameraManager, so it is no longer
a user responsibility to control the event dispatching.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
After introduction of reuse(), there is no need of manual request
reconfiguration. Furthermore, current example code does not work
anymore.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Request::BufferMap key type is now const
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
camera->createRequest() function return std::unique_ptr<Request>, then
manipulate Request as std::unique_ptr.
This solve the following error, during compilation:
error: cannot convert ‘std::unique_ptr<libcamera::Request>’ to ‘libcamera::Request*’ in initialization
References:
- https://github.com/kbingham/simple-cam/blob/bb97f3bbd96a9d347e1b7f6cb68d94efaf8db574/simple-cam.cpp#L369
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a basic doc for the Python bindings. While not really proper
documentation yet, the file and the examples should give enough guidance
for users who are somewhat familiar with libcamera.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the logger to support coloring messages. The log level is
colorized with per-level colors, and the category with a fixed color.
This makes the log output more readable.
Coloring is enabled by default when logging to std::cerr, and can be
disabled by setting the LIBCAMERA_LOG_NO_COLOR environment variable.
When logging to a file with LIBCAMERA_LOG_FILE, coloring is disabled. It
can be enabled for file logging using the logSetFile() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
meson.source_root() and meson.build_root() are deprecated. Use
meson.project_source_root() and meson.project_build_root() instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Avoid a redirection from http by using https directly.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Quentin Schulz <foss+libcamera@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A few typos made it to the docs, so let's fix them.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Quentin Schulz <foss+libcamera@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace U+2019 unicode character (’; right single quotation mark) by
U+27 unicode character ('; apostrophe) as it is what most people are
used to in sentences.
While Sphinx seems to be rendering both the same way, it makes it easier
for searching in rST files directly.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Quentin Schulz <foss+libcamera@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The introduction incorrectly spells the word Compatibility. Fix it
Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While familiarity with git is nowadays common, many developers are not
familiar with mail-based patch submission. Add a paragraph to the
contribution guide to mention that libcamera uses a mail-based process
(which seems to have been taken for granted so much that we forgot to
say it explicitly), and link to git-send-email.io to help newcomers
setup git-send-email.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fixes two spelling mistakes in introduction.rst
This patch has no functional changes.
Signed-off-by: Kunal Agarwal <kunalagarwal1072002@gmail.com>
Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
