| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for including more of the Documentation for libcamera
on the website, break out the libcamera Architecture and Feature
Requirements sections of docs.rst file into separate files for each
section. Add all of the new files to documentation-contents.rst so
they're included on the website too.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There are two near-duplicate instances of the camera stack details
in the Documentation, in docs.rst and guides/introduction.rst. Remove
them from guides/introduction.rst, with the exception of the
explanations of the V4L2 Compatibility Layer and the Android HAL
which are moved to the Camera Stack section in docs.rst. The Docs
page already had its own separate version of those details but they
are distinct and seemingly out of date - remove them.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the exception of the initial group of four links, alphabetise
the pages in the Documentation toctree so adding new ones can be
done in a defined order.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new .rst file referencing the documentation contents. This file
is then included in each documentation page so that we can enhance
the Documentation pages on the libcamera website using it. As we do
not want the appearance of the libcamera in-tree Documentation to
change just yet, disable the new class using the sphinx theme's CSS.
To facilitate easier distinguishing between "normal" and
documentation pages on the website we want to add a "documentation"
class to the content of all such pages. Since this new file will be
included on each documentation page it is convenient to add the new
directive here - do so. As the website uses different CSS to
libcamera, move the contents on docs.rst a little so that the
directive at the end of the contents block applies correctly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The control descriptions from YAML files are extracted to generate
Doxygen documentation blocks for the controls, which are then compiled
to HTML. The extraction script uses the first line of the description
as the Doxygen \brief, and preserves blank lines to keep paragraphs.
The control descriptions in the YAML files have however not all been
written with this in mind. Many description elements are not formatted
as block string scalars, in the first place, so blank lines are lost
when parsing YAML. Furthermore, they often start with a long initial
paragraph, making the \brief description very long.
Improve the documentation formatting by marking all multiline
descriptions as block string scalars, and try to provide a short
one-line first paragraph to be used as a \brief. While at it, reflow the
documentation to the 80 columns limit.
The draft controls are left as-is, as they should evolve to non-draft
controls eventually (and ideally sooner than later).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Jinja2 templates help separate the logic related to the template from
the generation of the data. The python code becomes much clearer as a
result.
As an added bonus, we can use a single template file for both controls
and properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Replace manual extraction of data from YAML with the Control helper
class. This centralizes YAML parsing and avoids manual mistakes.
In order to import the controls module, add the utils/codegen/ directory
to the PYTHONPATH through the Python build environment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The ControlEnum and Control helper classes defined in gen-controls.py
are useful for other generator scripts. Move them to a separate file to
make it possible to share them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Jinja2 templates help separate the logic related to the template from
the generation of the data. The python code becomes much clearer as a
result.
As an added bonus, we can use a single template file for both controls
and properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The libcamera.h header is a top-level library header that contains every
other libcamera header. It is currently generated by listing the files
in include/libcamera/ and dropping the .in suffix from template files.
This assumes a 1:1 mapping between generated header file names and the
name of their templates.
Drop that assumption and base the libcamera.h generation on the
libcamera public headers listed in meson.build. This makes the
libcamera.h header generation more future-proof.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Python scripts run as part of the build process need to take a few
actions specific to the environment in which they operate. One of those
is disabling the Python bytecode cache, to avoid writing .pyc files to
the source tree. This is done manually in the IPC generate.py and
parser.py scripts.
The current implementation is not ideal because it hardcodes in the
scripts information related to the environment in which they operate. As
those scripts are part of libcamera this is more of a theoretical issue
than a practical one. A second issue is that future Python scripts will
need to duplicate similar mechanisms, resulting in a higher maintenance
burden.
Address the issue with a different approach, by creating a meson
environment for the Python scripts, and passing it to the
custom_target() functions. The environment only disables the bytecode
cache for now.
The diffstat shows an increase in code size. This is expected to be
offset by usage of the environment for more Python scripts, as well as
support of more variables in the environment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We have multiple code generation scripts in utils/, mixed with other
miscellaneous utilities, as well as a larger code base based on mojom in
utils/ipc/. To make code sharing easier between the generator scripts,
without creating a mess in the utils/ directory, move all the code
generation code to utils/codegen/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit 829acb3ab0b1 ("libcamera: Drop file name from header comment
blocks in templates") dropped file names from header comment blocks in
templates, but forgot the control and property .cpp templates. Fix it.
Fixes: 829acb3ab0b1 ("libcamera: Drop file name from header comment blocks in templates")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The header for controls and properties are generated from the
control_ids.h.in and property_ids.h.in templates respectively, and the
generated files are named control_ids.h and property_ids.h.
For sources, the templates are named control_ids.cpp.in and
property_ids.cpp.in, but the output files are named controls_ids.cpp and
properties_ids.cpp. This discrepancy causes confusion. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When generating control headers, the YAML files to be used are
determined dynamically based on the selected pipeline handlers. As part
of this process, the build system populates an array of meson File
objects used as an input for the control headers generation custom
target, as well as an array of file names (as strings). The file names
array is later used to generate the control source files for the
libcamera core, as well as the source code for controls support in the
Python bindings.
Both of the source code generators manually turn the array of file names
into File objects. This duplicates code and reduces readability. A third
similar implementation has also been proposed to generate control
support sources in the GStreamer element, making the issue worse.
To simplify this, store File objects instead of file names in the
controls_files array. As the meson configuration summary doesn't support
File objects, create a separate controls_files_names to store the file
names for that sole purpose.
The exact same process occurs for properties, address them the same way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Change the first parameter of Tuner.add() to accept either a list of
modules or a single module. This allows more compact code and is in sync
with Tuner.set_output_order().
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The instances of the static modules need to be passed to
tuner.set_output_order() instead of the class. This is the reason for
the intermediate variables. To keep the code tidy, apply the same
pattern to the other modules.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Camera::create() function is internal. Hide it from the public API
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The "Main Page" of the doxygen generated API reference is currently
totally empty. Expand it with some introductory text along with links
to the developer's guide, application developer's guide and the
pipeline and IPA module writer's guides.
Provide an easy link to switch between the reduced public reference
pages and the more complete internal ones.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The API reference pages generated by Doxygen are comprehensive, but
therefore quite overwhelming for application developers who will
likely never need to use the majority of the library's objects. To
reduce the complexity of the documentation, split it into two runs of
doxygen.
The first run of doxygen is for the public API. We pass a specific list
of source files to parse, which is built from the arrays of public
headers and sources in meson build files. This ensures that we only
generate the documentation for code from those files.
A custom Python script is needed to add the list of input files to
Doxyfile, as several of the objects included in the header and source
array are custom_tgt objects, which can't be handled as strings to
populate a variable in the configuration data.
The headers defining the Extensible and Object classes (class.h and
object.h respectively), as well as the corresponding source files, are
excluded from the public API documentation despite being referenced in
the meson public headers and sources arrays. This is due to the fact
that public API classes inherit from Extensible and Object, making the
Extensible and Object classes part of the public ABI. Those two base
classes are however implementation details and must not be accessed
directly by application code.
The second run of doxygen is for the internal API. This contains
documentation for all of the library's objects as it currently does.
This set will now be output into build/Documentation/internal-api-html.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
To prepare for splitting the API documentation in public and internal
documents, split the doxygen_input list in the public and internal
counterparts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the section of the Thread support page dealing with thread safety
to a dedicated .dox file at Documentation/. This is done to support the
splitting of the Documentation into a public and internal version. With
a separate page, references can be made to thread safety without having
to include the Thread class in the doxygen run. Some sections of the new
page are still specific to internal implementations and so are hidden
with the \internal flag and an internal section which is conditionally
included. For now, hardcode it to be included in the Doxyfile.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Qt5 is now end of life. The libcamera 'qcam' application has removed
support for Qt5, and updated to Qt6.
Update the python 'cam' application accordingly to Qt6.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rectify incorrect phrase in the sentence -- s/their share/they share/.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor reference was missing, causing the constructor
documentation to appear in blackLevel() documentation.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When debugging issues with the Commit class, a __repr__ method proved to
be useful to quickly print all the parsed information about a commit. To
avoid reimplementing the method over and over again in the future, add
it to the class, even if it is not actually used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When running checkstyle.py in a pre-commit hook, there is either no
commit message at all (when committing staged changes as a new commit),
or the commit message comes from a previous commit being amended. In
either case, there's no new commit message yet, and thus nothing to
validate for the title and trailers checkers. The trailers checker, in
particular, will always flag an error, making all commits fail.
To fix that, just skip the two checkers during pre-commit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When parsing commit messages, the Commit class tries to optimize the
process by invoking git-show once only, extracting both the commit
author, title and modified files in one go. As a result, the derived
Amendment class needs to implement the commit parsing separately, as the
modified files need to be extracted differently for amendments (and the
commit ID also needs to be retrieved differently). Furthermore, because
of the list of named files, extracting the trailers needs to invoke
git-show separately.
Improve the situation by reworking the commit message parsing in three
steps. In the first step, use git-show to extract the commit ID, author,
title and body. In the second step, invoke git-interpret-trailers to
extract the trailers from the body that was previously extracted. The
third and final step extracts the list of modified files, using
different methods for regular commits and amendments.
This allows sharing code for the first two steps between the Commit and
Amendment classes, making the code simpler. The Commit class still
invokes git three times, while the Amendment class runs it three times
instead of four, improving performance slightly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add support for a 12-bit Mono format named formats::R12_CSI2P.
This format is added to support the IMX585 mono sensor, which uses the
MEDIA_BUS_FMT_Y12_1X12 media bus format.
Signed-off-by: will whang <will@willwhang.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The libcamera coding style groups the C and C++ standard library headers
in a single group. Fix the few offenders in the source tree.
While at it, add a missing blank line between header groups in a
separate location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Without the change the build fails on upcoming `gcc-15` as:
In file included from ../src/libcamera/yaml_parser.cpp:8:
../include/libcamera/internal/yaml_parser.h:183:41: error: 'uint8_t' was not declared in this scope
183 | std::is_same_v<uint8_t, T> ||
| ^~~~~~~
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Without the change the build fails on upcoming `gcc-15` as:
In file included from ../src/libcamera/base/file.cpp:8:
../include/libcamera/base/file.h:62:33: error: 'uint8_t' was not declared in this scope
62 | ssize_t read(const Span<uint8_t> &data);
| ^~~~~~~
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The udev_monitor_receive_device() can return NULL on an error as
detailed in the man pages for the function.
The udevNotify() handler in the DeviceEnumeratorUdev directly uses the
return value of udev_monitor_receive_device() in successive calls to
process the event without having first checked the udev_device.
Ensure we identify, and handle events where the udev_device can not be
returned successfully.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=230
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPAManager class implements a singleton pattern due to the need of
accessing the instance in a static member function. The function now
takes a pointer to a PipelineHandler, which we can use to access the
CameraManager, and from there, the IPAManager.
Add accessors to the internal API to expose the CameraManager from the
PipelineHandler, and the IPAManager from the CameraManager. This
requires allocating the IPAManager dynamically to avoid a loop in
includes. Use those accessors to replace the IPAManager singleton.
Update the IPA interface unit test to instantiate a CameraManager
instead of an IPAManager and ProcessManager, to reflect the new way that
the IPAManager is accessed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Trailers are extracted from commits using the '(trailers:*)' formatting
specifier. git ignores dividers when doing so, as if the --no-divider
options was passed to git-interpret-trailers. This prevents trailers
from being located when the patch contains a local changelog.
There is unfortuantely no 'no-no-divider' option to the trailers format
specifier. Fix the issue by extracting trailers with
git-interpret-trailers, that gives better control of the parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The TrailersChecker enforces the presence of a Signed-off-by tag in the
trailer, but doesn't verify that the tag matches the commit's author.
Add that verification, as required by the libcamera contribution
process.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Extend the Commit class with an author property, retrieved from the
commit. It will be used to extend checkers.
While at it, drop the unneeded .strip() call when retrieving the title
for amendment commits. The call got carried over from code that
initially needed it to strip the new line character, but that need
disappeard with usage of .splitlines().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that libcamera_internal_sources is separate from
libcamera_internal_headers, perform the same split for
libcamera_public_sources and libcamera_public_headers to ensure
consistency of the build system variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera_tracepoint_header variable stores the tracepoints.h header
custom target, for the sole purpose of being listed as a source of the
libcamera shared library, through the libcamera_internal_sources
variable.
Add the tracepoints.h header to libcamera_internal_headers instead of
libcamera_internal_sources, and list libcamera_internal_headers as a
source of the shared library, alongside libcamera_internal_sources. This
makes libcamera_internal_sources contain sources only, improving clarity
of the build system variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ipa_data_serializer.h and ipc_pipe.h headers are missing from
libcamera_internal_headers. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA headers are listed in two different meson variables, one for
generated headers, and one for the other headers. There's no real reason
for this split, consolidate all of them in the libcamera_ipa_headers
variable.
While at it, don't add the IPA headers to the libcamera_internal_sources
variable, but list libcamera_ipa_headers in the sources for the shared
library. This moves the libcamera_internal_sources variable towards
holding source files, not header files, to improve clarity of the build
system.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA headers are listed in the libcamera_public and libcamera_private
dependency objects, with the generated headers part of the private
dependency object and the non-generated headers part of the public
dependency object. As neither set of IPA headers are part of the public
API, list them both in the libcamera_private dependency object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera_generated_ipa_headers variable, containing the list of
generated IPA headers, is listed in the sources of IPA modules, as well
as IPA tests. This was done to ensure that the modules and tests get
rebuilt when the generate IPA headers change. However, the dependency is
already handled through the libcamera_private dependency object,
specified for all those modules and tests. There's no need to list the
IPA generated headers as sources. Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The generated version.h header is part of the public headers, but is
missing from the libcamera_public_headers variable. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson array variables hold lists of libcamera's source files. To help
facilitate the splitting of Doxygen generated documentation into
distinct public and internal versions, split those arrays to separate
public and internal variables.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The *::Private classes are part of the internal API, as their name
implies. They are defined in internal headers, but implemented in the
same source file as their public counterparts. This will cause Doxygen
to complain about missing class definition when splitting the public and
internal API documents, as the internal headers won't be parsed by
Doxygen for the public API documentation.
Marking the classes with \internal isn't enough. The directive prevents
the documentation block from being included in the output, but this
occurs at the generation stage, after the documentation blocks are
parsed. Fix this by completely hidding the implementation of the
*::Private classes from Doxygen using preprocessor conditional
compilation. To do so, introduce a new macro, __DOXYGEN_PUBLIC__, that
will be defined for the public API documentation only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera public API exposes classes that have parts considered
internal. They inherit the Extensible class, and their internal parts
are split into a Private class. Those classes are defined in public API
headers, and their Private counterparts are defined in internal headers
sharing a common file name (in a different directory). Both headers are
documented in the same source file.
For instance, include/libcamera/camera.h contains the public API of the
Camera class, and include/libcamera/internal/camera.h its internal
counterpart. Both are documented in src/libcamera/camera.cpp.
As the internal headers are not part of the public API, they need to be
hidden from the future public API builds. To prepare for doing so, mark
them with the \internal Doxygen directive. Hardcode the Doxygen
INTERNAL_DOCS option to YES to include the internal API. This will be
changed later for the public API documentation build.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera has two formats.h headers, an internal one in
include/libcamera/internal/, and a public one generated at build time.
The convention is to prefix the internal header name with
libcamera/internal/ in the Doxygen file directive, but formats.cpp only
uses internal/ as a prefix. Unify it with the rest of the code base.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Two classes that have both public and internal headers, namely Camera
and Request, make only their public header visible to Doxygen through a
file directive. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
