summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-26ipa: ipu3: awb: Reword accumulator documentationJean-Michel Hautbois
Now that we moved the diagram into the AWB class documentation, reword the accumulator documentation to make it clear it is not meant to be used only in AWB. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: awb: Add AWB class documentationJean-Michel Hautbois
The AWB algorithm is based on the Grey world algorithm and uses the statistics generated by the ImgU for that. Explain how it uses those, and reference the original algorithm at the same time. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-26ipa: ipu3: Explicitly use the statistics parameterJean-Michel Hautbois
The stats pointer is marked as [[maybe_unused]]. This is a leftover from a previous commit which was here to keep the compatibility while transitioning to the new iterative algorithms. Remove this attribute to make it explicit that stats are really used to feed the algorithms. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-26ipa: ipu3: Document the IPAIPU3 classJean-Michel Hautbois
Clarify the roles and interactions between the pipeline handler events and the algorithm calls by documenting all the remaining functions of the class. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-26ipa: ipu3: Document IPAIPU3::configureJean-Michel Hautbois
Further extend the documentation for the IPAIPU3::configure operation. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-26ipa: ipu3: Document IPAIPU3 class interfaceJean-Michel Hautbois
The IPU3 IPA is maturing to a modular and extensible system capable of handling specific algorithms for the processing blocks on the ImgU. Provide a top-level class documentation to provide an overview of the IPA, detailing what events are used and what algorithms are currently supported, as well as the limitations currently imposed. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-26android: post_processor: Make post processing asyncUmang Jain
Introduce a dedicated worker class derived from libcamera::Thread. The worker class maintains a queue for post-processing requests and waits for a post-processing request to become available. It will process them as per FIFO before de-queuing it from the queue. The entire post-processing handling iteration is locked under streamsProcessMutex_ which helps us to queue all the post-processing request at once, before any of the post-processing completion slot (streamProcessingComplete()) is allowed to run for post-processing requests completing in parallel. This helps us to manage both synchronous and asynchronous errors encountered during the entire post processing operation. Since a post-processing operation can even complete after CameraDevice::requestComplete() has returned, we need to check and complete the descriptor from streamProcessingComplete() running in the PostProcessorWorker's thread. This patch also implements a flush() for the PostProcessorWorker class which is responsible to purge post-processing requests queued up while a camera is stopping/flushing. It is hooked with CameraStream::flush(), which isn't used currently but will be used when we handle flush/stop scenarios in greater detail subsequently (in a different patchset). The libcamera request completion handler CameraDevice::requestComplete() assumes that the request that has just completed is at the front of the queue. Now that the post-processor runs asynchronously, this isn't true anymore, a request being post-processed will stay in the queue and a new libcamera request may complete. Remove that assumption, and use the request cookie to obtain the Camera3RequestDescriptor. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-26android: post_processor: Drop return value for process()Umang Jain
PostProcessor::process() is invoked by CameraStream class in case any post-processing is required for the camera stream. The failure or success is checked via the value returned by CameraStream::process(). Now that the post-processor notifies about the post-processing completion operation, we can drop the return value of PostProcessor::process(). The status of post-processing is passed to CameraDevice::streamProcessingComplete() by the PostProcessor::processComplete signal's slot. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-26android: Track and notify post processing of streamsUmang Jain
Notify that the post processing for a request has been completed, via a signal. The signal is emitted with a context pointer along with status of the buffer. The function CameraDevice::streamProcessingComplete() will finally set the status on the request descriptor and complete the descriptor if all the streams requiring post processing are completed. If buffer status obtained is in error state, notify the status to the framework and set the overall error status on the descriptor via setBufferStatus(). We need to track the number of streams requiring post-processing per Camera3RequestDescriptor (i.e. per capture request). Introduce a std::map to track the post-processing of streams. The nodes are dropped from the map when a particular stream post processing is completed (or on error paths). A std::map is selected for tracking post-processing requests, since we will move post-processing to be asynchronous in subsequent commits. A vector or queue will not be suitable as the sequential order of post-processing completion of various requests won't be guaranteed then. A streamsProcessMutex_ has been introduced here as well, which will be applicable to guard access to descriptor's pendingStreamsToProcess_ when post-processing is moved to be asynchronous in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-26android: post_processor: Consolidate contextual informationUmang Jain
Save and provide the context for post-processor of a camera stream via Camera3RequestDescriptor::StreamBuffer. We extend the structure to include source and destination buffers for the post processor, along with CameraStream::Type::Internal buffer pointer (if any). In addition to that, a back pointer to Camera3RequestDescriptor is convenient to get access to overall descriptor (status, metadata settings etc.). Also, migrate CameraStream::process() and PostProcessor::process() signature to use Camera3RequestDescriptor::StreamBuffer only. This will be helpful when we move to async post-processing in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-26android: camera_device: Refactor descriptor status and sendCaptureResults()Umang Jain
Currently, we use Camera3RequestDescriptor::Status to determine: - When the descriptor has been completely processed by HAL - Whether any errors were encountered, during its processing Both of these are essential to know whether the descriptor is eligible to call process_capture_results() through sendCaptureResults(). When a status(Success/Error) is set on the descriptor, it is ready to be sent back via sendCaptureResults(). However, this might lead to undesired results especially when sendCaptureResults() runs in a different thread (for e.g. stream's post-processor async completion slot). This patch decouples the descriptor status (Success/Error) from the descriptor's completion status (pending or complete). The advantage of this is we can set the completion status when the descriptor has been processed fully by the layer and we can set the error status on the descriptor wherever an error is encountered, throughout the lifetime of the descriptor in the HAL layer. While at it, introduce a wrapper completeDescriptor() around sendCaptureResults(). completeDescriptor() as the name suggests will mark the descriptor as complete, so it is ready to be sent back. The locking mechanism is moved from sendCaptureResults() to this wrapper since the intention is to use completeDescriptor() in place of existing sendCaptureResults() calls. Also make sure the sequence of abortRequest() call happens in the same order at all places i.e. after its added to the descriptors_ queue. Fix one of the abortRequest() call accordingly. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-26android: post_processor_jpeg: Replace encoder_ nullptr checkUmang Jain
Instead of simply returning if encoder_ is nullptr, fail hard via an assertion. It is quite unlikely that encoder_ could only be null as a result of a fatal bug in the code, so be loud about the failure. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26android: camera_stream: Replace post-processor nullptr checkUmang Jain
Instead of checking postProcessor for nullptr, replace this check with an assertion that checks if the camera stream's type is not Type::Direct. Since it makes no sense to call CameraStream::process() on a Type::Direct camera stream. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-25libcamera: request: Use external CameraControlValidatorKieran Bingham
Each Request is currently creating its own CameraControlValidator using the Camera instance at construction. Now that the Camera exposes its own CameraControlValidator on its private interface, use that one on all Requests. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-25libcamera: camera: Create a CameraControlValidatorKieran Bingham
Create a Camera-specific CameraControlValidator for the Camera instance. This will allow requests to use a single validator instance without having to construct their own. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-25libcamera: v4l2_videodevice: Explain multiplanar bytesused reasoningKieran Bingham
The ternary operation used to get the total bytesused of a V4L2 single planar format which is stored in a multiplanar buffer can easily be mis-read to think it's a bug, and appears to be reading the value of the first of N planes as the total. Directly explain the reasoning for why it looks like the condition is inverted, as it is correct that the total bytes used is stored in only the first plane of the multiplanar buffer. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: Use sensor limits for analogue gainJean-Michel Hautbois
Instead of using constants for the analogue gains limits, use the minimum and maximum from the configured sensor. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Remove unused variablesJean-Michel Hautbois
We currently control the exposure value by the shutter speed and the analogue gain. We can't use the digital gain to have more than the maximum exposure value calculated because we are not controlling it. Remove unused code associated with this digital gain. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Refactor condition on exposure correctionJean-Michel Hautbois
Simplify the reading by removing one level of indentation to return early when the change is small between two calls. Reword the LOG() message when we are correctly exposed, and move the lastFrame_ variable to update it even if the change is small. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Introduce previous exposure valueJean-Michel Hautbois
We need to calculate the gain on the previous exposure value calculated. Now that we initialise the exposure and gain values in configure(), we know the initial exposure value, and we can set it before any loop is running. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Rename gains properlyJean-Michel Hautbois
We have mixed terms between gain, analogue gain and the exposure value gain. Make it clear when we are using the analogue gain from the sensor, and when we are using the calculated gain to be applied to the exposure value to reach the target. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Simplify division of exposure/gainJean-Michel Hautbois
Until now, the algorithm makes complex assumptions when dividing the exposure and analogue gain values. Instead, use a simpler clamping of the shutter speed first, and then of the analogue gain, based on the limits configured. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Use filtered exposure valuesJean-Michel Hautbois
We are filtering the exposure value to limit the gain to apply, but we are not using the result. Fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Change analogue gain limitsJean-Michel Hautbois
The gains are currently set as a uint32_t while the analogue gain is passed as a double. We also have a default maximum analogue gain of 15 which is quite high for a number of sensors. Use a maximum value of 8 which should really be configured by the IPA and not fixed as it is now. While at it make it a double. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Change exposure limitsJean-Michel Hautbois
We are using arbitrary constants for the exposure limit in a number of lines. Instead of using static constants for those, use the limits of the sensor passed in IPASessionConfiguration and cache those. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Rename exposure values properlyJean-Michel Hautbois
The exposure value is filtered in filterExposure() using the currentExposure_ and setting a prevExposure_ variable. This is misnamed as it is not the previous exposure, but a filtered value. Rename it accordingly. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: awb: Change minimal green threshold valueJean-Michel Hautbois
When zones are used for the grey world algorithm, they are only considered if their average green value is at least 32/255 to exclude zones that are too dark and don't provide relevant colour information (on the opposite side of the spectrum, saturated regions are excluded by the ImgU statistics engine). The algorithm requires a minimal number of zones that meet this criteria in order to run. Now that we correct the black level, the 32/255 minimal value is a bit high and prevents the algorithm for running in low-light conditions. Lower the value to 16/255 to fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: awb: Use saturation under 90%Jean-Michel Hautbois
The AWB grey world algorithm tries to find a grey value and it can't do it on over-exposed images. To exclude those, the saturation ratio is used for each cell, and the cell is included only if this ratio is 0. Now that we have changed the threshold, more cells may be considered as partially saturated and excluded, preventing the algorithm from running efficiently. Change that behaviour, and consider 90% as a good enough ratio. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: set frameContext before controlsJean-Michel Hautbois
The AGC frame context needs to be initialised correctly for the first iteration. Until now, the IPA uses the minimum exposure and gain values and caches those in local variables. In order to give the sensor limits to AGC, create a new structure in IPASessionConfiguration. Store the exposure in time (and not line duration) and the analogue gain after CameraSensorHelper conversion. Set the gain and exposure appropriately to the current values known to the IPA and remove the setting of exposure and gain in IPAIPU3 as those are now fully controlled by IPU3Agc. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: awb: Set a threshold for the green saturationJean-Michel Hautbois
We can have a saturation ratio per cell, giving the percentage of pixels over a threshold within a cell where 100% is set to 0xff. The parameter structure 'ipu3_uapi_awb_config_s' contains four fields to set the threshold, one per channel. The blue field is also used to configure the ImgU and make it calculate the saturation ratio or not. Set a green value saturated when it is more than 230 (90% of the maximum value 255, coded as 8191). As this is the only channel used for AGC, there is no need to apply it to the other ones. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-21android: camera_device: Cleanup header includesLaurent Pinchart
camera_device.cpp doesn't use the PostProcessor class, the post_processor.h header shouldn't be included. Removing it causes a compilation failure as the CameraBuffer class is not defined anymore, include camera_buffer.h instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-19android: camera_metadata: Rename get() to getMetadata()Umang Jain
Rename CameraMetadata::get() to CameraMetadata::getMetadata() to avoid confusion with std::unique_ptr::get() when CameraMetadata is used with a std::unique_ptr. No functional changes intended in this patch. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_stream: Define explicit move constructor and destructorsLaurent Pinchart
There's no need for the move constructor and the destructor to be inline. Define them explicitly, with default implementations. This allows usage of the CameraStream class without a complete definition of the PostProcessor class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_stream: Don't close fence if wait failsLaurent Pinchart
The camera HAL APIs requires that any acquire fence that hasn't been waited on to be sent back to the framework as a release fence. The CameraDevice already copies the acquire fence to the release fence when signaling request completion, but the CameraStream incorrectly closes the fence when a wait fails and sets it to -1. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_request: Don't embed full camera3_stream_buffer_tLaurent Pinchart
The camera3_stream_buffer_t structure is meant to communicate between the camera service and the HAL. They are short-live structures that don't outlive the .process_capture_request() operation (when queuing requests) or the .process_capture_result() callback. We currently store copies of the camera3_stream_buffer_t passed to .process_capture_request() in Camera3RequestDescriptor::StreamBuffer to store the structure members that the HAL need, and reuse them when calling the .process_capture_result() callback. This is conceptually not right, as the camera3_stream_buffer_t pass to the callback are not the same objects as the ones received in .process_capture_request(). Store individual fields of the camera3_stream_buffer_t in StreamBuffer instead of copying the whole structure. This gives the HAL full control of how data is stored, and properly decouples request queueing from result reporting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-10-19android: camera_device: Use abortRequest() instead of open-coding itLaurent Pinchart
Call abortRequest() in CameraDevice::requestComplete() instead of open-coding it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_stream: Return non-const pointer from camera3Stream()Laurent Pinchart
The camera3_stream_t instances are used to interact with the camera service, whose API uses non-const pointers. Replace the const reference returned by CameraStream::camera3Stream() with a non-const pointer. It turns out that nobody calls this function, but new users will be introduced in subsequent commits. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_stream: Pass StreamBuffer to process()Laurent Pinchart
Now that we have a proper structure to model a stream buffer, pass it to CameraStream::process() instead of the camera3_stream_buffer_t. This will allow accessing other members of StreamBuffer in subsequent commits. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19android: camera_device: Create struct to track per stream bufferUmang Jain
The Camera3RequestDescriptor structure stores, for each stream, the camera3_stream_buffer_t and the libcamera FrameBuffer in two separate vectors. This complicates buffer handling, as the code needs to keep both vectors in sync. Create a new structure to group all data about per-stream buffers to simplify this. As a side effect, we need to create a local vector of camera3_stream_buffer_t in CameraDevice::sendCaptureResults() as the camera3_stream_buffer_t instances stored in the new structure in Camera3RequestDescriptor are not contiguous anymore. This is a small price to pay for easier handling of buffers, and will be refactored in subsequent commits anyway. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-19android: camera_stream: Plumb process() with Camera3RequestDescriptorUmang Jain
Data (or broader context) required for post processing of a camera request is saved via Camera3RequestDescriptor. Instead of passing individual arguments to CameraStream::process(), pass the Camera3RequestDescriptor pointer to it. All the arguments necessary to run the post-processor can be accessed from the descriptor. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-19android: camera_device: Build capture_result dynamicallyLaurent Pinchart
The camera3_capture_result_t is only needed to convey capture results to the camera service through the process_capture_result() callback. There's no need to store it in the Camera3RequestDescriptor. Build it dynamically in CameraDevice::sendCaptureResults() instead. This requires storing the result metadata created in CameraDevice::requestComplete() in the Camera3RequestDescriptor. A side effect of this change is that the request metadata lifetime will match the Camera3RequestDescriptor instead of being destroyed at the end of requestComplete(). This will be needed to support asynchronous post-processing, where the request completion will be signaled to the camera service asynchronously from requestComplete(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-10-19android: camera_request: Turn struct into a classLaurent Pinchart
The Camera3RequestDescriptor structure is growing into an object with member functions. Turn it into a class, uninline the destructor to reduce code size, explicitly disable copy as requests are not copyable, and delete the default constructor to force all instances to be fully constructed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19camera_device: Remove private scope of Camera3RequestDescriptorUmang Jain
Camera3RequestDescriptor is a utility structure that groups information about a capture request. It can be and will be extended to preserve the context of a capture overall. Since the context of a capture needs to be shared among other classes (for e.g. CameraStream) having a private definition of the struct in CameraDevice class doesn't help. Hence, de-scope the structure so that it can be shared with other components (through references or pointers). Splitting the structure to a separate file will help avoiding circular dependencies when using it through the HAL implementation. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-10-19build: Preserve upstream git versioning using meson distNaushir Patuck
When distributions build and package libcamera libraries, they may not necessarily run the build in the upstream source tree. In these cases, the git SHA1 versioning information will be lost. This change addresses that problem by requiring package managers to run 'meson dist' to create a tarball of the source files and build from there. On runing 'meson dist', the utils/run-dist.sh script will create a .tarball-version file in the release tarball with the version string generated from the existing utils/gen-version.sh script. The utils/gen-version.sh script has been updated to check for the presence of this .tarball-version file and read the version string from it instead of creating one. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-19utils: gen-version: Pass the meson source root to the gen-version.sh scriptNaushir Patuck
The gen-version.sh script expects to be called from a git repo, and sets its src_root variable accordingly. This may not always be the case if it is built from a tarball source - full support for which is in a future commit. The MESON_SOURCE_ROOT environnement variable does not get set when called from the meson vcs_tag() function, but does when called from the run_command() function, so that cannot be used either. Instead, explicitly pass the meson source root to the gen-version.sh script. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-19utils: hooks: pre-push: Check push to integration/* branchesLaurent Pinchart
Branches named integration/* are candidates for merge in the master branch. Subject them to the same checks in the pre-push git hook. An important difference between integration branches and the master branch is that the former are typically created as new branches. We can't check the whole history as there are known bad commits, so we have to identify the base commit for the integration branch. The best approximation is to use the remote master branch for the tree being pushed to. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-19README: Document dependencies for backtrace generationLaurent Pinchart
libcamera now has the ability to use libdw and libunwind to generate backtraces, in addition to the glibc backtrace() function. libdw provides the most detailed output and is highly recommended, but is limited to parsing backtraces, it doesn't support capturing them. libunwind and backtrace() provide both features. If backtrace() is available, libunwind will not bring any improvement. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-19libcamera: v4l2_videodevice: Improve debugging when buffer is too smallLaurent Pinchart
When a dequeued buffer is too small, the condition is logged and an error is returned. The logged message doesn't provide any information about the sizes, making debugging more difficult. Improve it by logging both the bytesused value and the length of each plane. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-19ipa: ipu3: agc: Remove "using" directive from agc.h headerLaurent Pinchart
"using" directives are harmful in headers, as they propagate the namespace short-circuit to all files that include the header, directly or indirectly. Drop the directive from agc.h, and use utils::Duration explicitly. While at it, shorten the namespace qualifier from libcamera::utils:: to utils:: in agc.cpp for Duration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-10-19ipa: ipu3: awb: Don't pass member variable to member functionLaurent Pinchart
The Awb::generateZones() member function fills the zones vector passed as an argument, which is actually a member variable. Use it directly in the function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>