| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The DRM(BGRA8888)/V4L2(ARGB8888) format is not supportable by the current
configurations of VIMC.
Remove it from the list of supported configurations.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Older kernels do not support all 'reported' formats. Skip them on those
kernels.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fail and return the Camera::configure() operation if any
of the stream turns out to be a nullptr even after the
PipelineHandler handler seems to have configured the config
successfully. This prevents a null-dereference below in the
loop.
Reported-by: Coverity CID=279069
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reported-by: Coverity CID=279091
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reported-by: Coverity CID=279097
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The reset function in staggered write was using the wrong index when
looking for the last updated camera parameters. This would cause
possibly stale exposure values to be written to the camera on a
mode switch for captures.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pick the correct media bus format based on the video pixel format on the
capture node.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We don't use full stops at the end of \return directives in Doxygen
documentation. Drop it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::getCameraInfo() method hardcodes the camera facing
side and orientation (which corresponds, confusingly, to libcamera's
location and rotation properties).
Instead of hard-coding the values based on the camera id, inspect the
libcamera properties that report the camera location and rotation in a
new initialize() method, and use them to report the android camera info
and to populate the static metadata buffer.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the supported API version in the camera_info structure provided
to the framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make the CameraDevice a Loggable subclass and provide a logPrefix()
method to identify which camera the log output refers to.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The return value of write() function is ignored, causing the following
compiler error|warning with gcc version 5.4
error: ignoring return value of 'ssize_t write(int, const void*, size_t)'
Fix this by storing the return value of write() and return a test error in
case of failure.
Reported-by: Coverity CID=284605
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The preferred coding style in libcamera is to declare private functions
before private variables in class definitions. This rule isn't followed
by some of the internal classes. Update them accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
|
|
When the native pixel formats supported by QT were introduced, the
RGB/BGR formats were inverted.
Swap the BGR888 and RGB888 mappings accordingly.
Fixes: f890a57b7a06 ("qcam: viewfinder: Add support for more native formats")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2 compatibility layer is licensed under the GPL. It is compiled
as a binary separate from libcamera.so, and is loaded into the address
space of processes through LD_PRELOAD to intercept calls to the C
library.
It is our understanding and intent that the GPL license doesn't
propagate to the binaries whose calls are intercepted, considering those
binaries are not derivative work of the V4L2 compatibility layer and are
not designed to be linked to the V4L2 compatibility layer. There is
however a possibly grey area if binaries are packaged with a shell
script wrapper that loads the V4L2 compatibility layer. This could lead
to license-related issues if such packaging is performed by Linux
distributions or system integrators.
To clarify the intent and lift the doubts, relicense the V4L2
compatibility layer under the LGPL. The V4L2 compatibility layer code
itself still benefits from the license protection, while its usage with
third-party binaries is clearly allowed as intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
Use the converter to implement scaling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Extend the SimpleConverter to support scaling, with reporting of the
minimum and maximum output sizes supported for a given input size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Report the stride when configuring the camera. The stride is retrieved
from the capture device first, and overridden by the converter if used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The default SizeRange constructor initializes the min and max members,
but leaves the hStep and vStep members uninitialized. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The RPiCameraData class destructor tries to stop its ipa_ instance
without making sure it has been initialized.
If the RPiCameraData gets destroyed before its ipa_ member is
initialized, for example if the sensor initialization fails during the
match() function, a nullptr dereference segfault is triggered preventing
a graceful library teardown.
Fix this by checking for ipa_ to be initialized before stopping it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update the properties parsing routine in the CameraSensor class to use
the newly defined V4L2 control V4L2_CID_CAMERA_ORIENTATION in place of
the downstream V4L2_CID_CAMERA_SENSOR_LOCATION which has now been
removed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The version of the v4l2-controls.h header file shipped by libcamera had
deviated from the upstream one, as it included definitions for v4l2
controls that report camera properties, which were not accepted
upstream at the time the header file was updated.
Now that the controls definition has been accepted in the master branch
of the linux-media kernel tree, update include/linux/v4l2-controls.h with
the upstream-accepted definition of the control ids that describe camera
properties.
The control definition has been imported from the Linux kernel header
files generated from the most recent linux-media master branch, at
revision
ad3a44cbd1b2e ("media: i2c: imx219: Parse and register properties")
Instead of updating the whole header, just update the definition of V4L2
controls that describe camera properties. A full header update will be
performed at a future Linux kernel release.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly added "fd move" constructor of the FileDescriptor class to
avoid dup() + close().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add a test for the newly added "fd move" constructor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The FileDescriptor class, when constructed from a numerical file
descriptor, duplicates the file descriptor and takes ownership of the
copy. The caller has to close the original file descriptor manually if
needed. This is inefficient as the dup() and close() calls could be
avoided, but can also lead to resource leakage, as recently shown by
commit 353fc4c22322 ("libcamera: v4l2_videodevice: Fix dangling file
descriptor").
In an attempt to solve this problem, implement move semantics for the
FileDescriptor constructor. The constructor taking a numerical file
descriptor is split in two variants:
- A "fd copy" constructor that takes a const lvalue reference to a
numerical file descriptor and duplicates it (corresponding to the
current behaviour).
- A "fd move" constructor that takes a rvalue reference to a numerical
file descriptor and takes ownership of it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Several headers belonging to cam and qcam use __LIBCAMERA_*_H__ as a
header guard. They're not part of the libcamera core, use __CAM_*_H__
and __QCAM_*_H__ instead, similarly to all other headers of cam and
qcam.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The FileDescriptor constructor used in V4L2VideoDevice::exportDmabufFd()
creates a duplicate of the fd to store in the object. The original
fd returned by the VIDIOC_EXPBUF ioctl was never closed, and left
dangling. This would cause out of memory conditions if the camera stream
was repeatedly started and stopped.
This change closes the original fd explicitly, fixing the leak.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The list of public, IPA and internal header files are stored in three
meson variables, named libcamera_api, libcamera_ipa_api and
libcamera_headers respectively. The lack of uniformity is a bit
confusing. Fix it by renaming those variables to
libcamera_public_headers, libcamera_ipa_headers and
libcamera_internal_headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA headers are installed into $prefix/include/libcamera/ipa/, but
are located in the source tree in include/ipa/. This requires files
within libcamera to include them with
#include <ipa/foo.h>
while a third party IPA would need to use
#include <libcamera/ipa/foo.h>
Not only is this inconsistent, it can create issues later if IPA headers
need to include each other, as the first form of include directive
wouldn't be valid once the headers are installed.
Fix the problem by moving the IPA headers to include/libcamera/ipa/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera internal headers are located in src/libcamera/include/.
The directory is added to the compiler headers search path with a meson
include_directories() directive, and internal headers are included with
(e.g. for the internal semaphore.h header)
#include "semaphore.h"
All was well, until libcxx decided to implement the C++20
synchronization library. The __threading_support header gained a
#include <semaphore.h>
to include the pthread's semaphore support. As include_directories()
adds src/libcamera/include/ to the compiler search path with -I, the
internal semaphore.h is included instead of the pthread version.
Needless to say, the compiler isn't happy.
Three options have been considered to fix this issue:
- Use -iquote instead of -I. The -iquote option instructs gcc to only
consider the header search path for headers included with the ""
version. Meson unfortunately doesn't support this option.
- Rename the internal semaphore.h header. This was deemed to be the
beginning of a long whack-a-mole game, where namespace clashes with
system libraries would appear over time (possibly dependent on
particular system configurations) and would need to be constantly
fixed.
- Move the internal headers to another directory to create a unique
namespace through path components. This causes lots of churn in all
the existing source files through the all project.
The first option would be best, but isn't available to us due to missing
support in meson. Even if -iquote support was added, we would need to
fix the problem before a new version of meson containing the required
support would be released.
The third option is thus the only practical solution available. Bite the
bullet, and do it, moving headers to include/libcamera/internal/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The StaggeredCtrl class, part of the Raspberry Pi pipeline handler, is
part of libcamera. Move it to the libcamera namespace to simplify usage
of libcamera APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The StaggeredCtrl class has large functions, move them to a .cpp file
instead of inlining them all to reduce the binary size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The ipa-sign-install.sh script, run when installing libcamera, signs all
IPA modules present in the module directory. This would result in
third-party modules being signed if any are present in the directory.
Fix it by explicitly passing the list of IPA modules to the
ipa-sign-install.sh script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
|
|
E302 expected 2 blank lines, found 0
Note that issues are still flagged, due to the use of docstrings as
multi-lines comments. This will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E305 expected 2 blank lines after class or function definition
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E741 ambiguous variable name 'l'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
W504 line break after binary operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E722 do not use bare 'except'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E721 do not compare types, use 'isinstance()'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E713 test for membership should be 'not in'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E116 unexpected indentation (comment)
E117 over-indented (comment)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E123 closing bracket does not match indentation of opening bracket's line
E126 continuation line over-indented for hanging indent
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E711 comparison to None should be 'if cond is None:'
E711 comparison to None should be 'if cond is not None:'
E712 comparison to False should be 'if cond is False:' or 'if not cond:'
E712 comparison to True should be 'if cond is True:' or 'if cond:'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E222 multiple spaces after operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E261 at least two spaces before inline comment
E262 inline comment should start with '# '
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E303 too many blank lines
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E701 multiple statements on one line (colon)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E228 missing whitespace around modulo operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E225 missing whitespace around operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
