summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17libcamera: pipeline: raspberrypi: Drop unused local variableLaurent Pinchart
The controls variable in PipelineHandlerRPi::start() is unused. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17libcamera: ipa_interface: Add support for custom IPA data to configure()Laurent Pinchart
Add two new parameters, ipaConfig and result, to the IPAInterface::configure() function to allow pipeline handlers to pass custom data to their IPA, and receive data back. Wire this through the code base. The C API interface will be addressed separately, likely through automation of the C <-> C++ translation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-17libcamera: ipa_context_wrapper: Fix bad copy&paste in commentLaurent Pinchart
A comment copied from the IPAInterfaceWrapper incorrectly mentions the IPAInterfaceWrapper class instead of the IPAContextWrapper class. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-17libcamera: ipa: Document the parameters of the IPA C configure functionLaurent Pinchart
The parameters to the configure() function part of the ipa_context_ops are not documented. Fix that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-15libcamera: file: Create the file on open() if it doesn't existLaurent Pinchart
When a file is opened in WriteOnly or ReadWrite mode, create it if it doesn't exist. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15test: file: Add file creation testLaurent Pinchart
Add a test to verify file creation with File::open(). The test is expected to fail as the File::open() implementation is not correct. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15test: file: Add read/write testsLaurent Pinchart
Add tests for the File::read() and File::write() functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: file: Add read/write supportLaurent Pinchart
Add basic support to read and write data from/to a file, along with retrieving and setting the current read/write position. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Provide in-place versions of the Size helpersLaurent Pinchart
Add alignDownTo(), alignUpTo(), boundTo() and expandTo() helper functions to the Size class. These are in-place versions of the existing alignedDownTo(), alignedUpTo(), boundedTo() and expandedTo() functions. The new helpers return a reference to the size, to allow chaining the functions. One can thus write size.alignDownTo(16, 16).alignUpTo(32, 32) .boundTo({ 40, 80 }).expandTo({ 16, 80 }); instead of size.alignDownTo(16, 16); size.alignUpTo(32, 32); size.boundTo({ 40, 80 }); size.expandTo({ 16, 80 }); Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Make Size and Rectangle usable as constexprLaurent Pinchart
There are use cases for declaring constexpr Size and Rectangle instances. Make it possible. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Turn Size and Rectangle into classesLaurent Pinchart
SizeRange is defined as a class while Size and Rectangle are defined as struct. This is confusing for users in forward declarations. Simplify it by turning both structures into classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Give constructors to RectangleLaurent Pinchart
Rectangle, unlike Size, has no constructor, requiring the users to explicitly initialize the instances. This is error-prone, add constructors. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Define Rectangle after SizeLaurent Pinchart
A subsequent change to the Rectangle will require the definition of the Size to be available. Define Rectangle after Size to ease review of that change. No code change is included. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Don't default-initialize Size unnecessarilyLaurent Pinchart
Size has a default constructor, there's no need to default-initialize instances explicitly. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: pipeline: simple: Use std::make_tuple()Laurent Pinchart
Prior to N4387 ([1]), the std::tuple::tuple(const Types&...) constructor was unconditionally explicit. gcc 5 doesn't implement N4387, leading to a compilation error in the simple pipeline handler. Use std::make_tuple() to fix it. [1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4387.html Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Add helper functions to the Size classLaurent Pinchart
Pipeline handlers commonly have to calculate the minimum or maximum of multiple sizes, or align a size's width and height. Add helper functions to the Size class to perform those tasks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-13tests: v4l2_compat: Check v4l2-compliance and v4l2-ctl versionsPaul Elder
v4l2-compliance and v4l2-ctl with version 1.20 and before will fail with v4l2-compat. Check the versions of v4l2-compliance and v4l2-ctl before continuing. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-13tests: v4l2_compat: Prettify failure outputPaul Elder
When a test is being run on a video device, there is output like so: Testing /dev/video0 with uvcvideo driver... and when it succeeds, "success" is appended: Testing /dev/video0 with uvcvideo driver... success On failure, however, the output of v4l2-compliance is printed before "failure" is printed, resulting in the first line of the v4l2-compliance output to be printed on the same line as the message: Testing /dev/video2 with uvcvideo driver... v4l2-compliance SHA: not available, 64 bits <v4l2-compliance output> failure Refactor the code to make "failure" print before the output of the test, to prettify the output upon failure. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: raspberrypi: Fix initial value for scoring routineNaushir Patuck
Use std::numerical_limits to initialise the best score instead of an arbitrary value. This fixes a failure in v4l2-conformance when using the Raspberry Pi pipeline handler and v4l2-compatibility libcamera layer. Reported-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2020-07-10tests: v4l2_compat: Add test for v4l2_compatPaul Elder
Test the V4L2 compatibility layer by running v4l2-compliance -s on every /dev/video* device. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10v4l2: v4l2_camera_proxy: Use stream config in tryFormatPaul Elder
For handling try_fmt, the values should be filled in by validating the stream configuration, and not by recalculating them or manually checking against the cached list of formats and sizes. Add a new V4L2Camera::validateConfiguration() function to validate a configuration and use it to obtain size, format, stride, and frameSize values. If the format negotiation fails, return error from try_fmt and s_fmt. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10v4l2: v4l2_camera_proxy: Get stride and frameSize from stream configPaul Elder
The stride and frameSize should be obtained through StreamConfiguration rather than PixelFormatInfo, as pipeline handlers might have different values (eg. for alignment). Get the stride and frameSize values from StreamConfiguration instead of from PixelFormatInfo. This removes the need for V4L2CameraProxy's calculation helper functions (bplMultiplier, imageSize, v4l2ToDrm, drmToV4L2, calculateSizeImage) and formats, so remove them. This also removes the need for V4L2CameraProxy::calculateSizeImage, so remove it,. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10v4l2: v4l2_camera: Fix stream selection for buffer operationsPaul Elder
The buffer operations in V4L2Camera were getting the stream from the wrong place. Fix it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: StreamConfiguration: Update stride documentationPaul Elder
Now that all the pipeline handlers fill in the stride information at validation time, update the documentation accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: vimc: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: uvcvideo: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: simple: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: rkisp1: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: raspberrypi: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: ipu3: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: uvcvideo: Filter out unsupported formatsPaul Elder
Unsupported formats should not be added to the configuration when generating the configuration. Filter them out. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: pipeline: raspberrypi: Filter out unsupported formatsPaul Elder
Unsupported formats should not be added to the configuration when generating the configuration. Filter them out. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline_handler: Fatal if registering camera without media devicesPaul Elder
Pipeline handlers must acquire media devices via PipelineHander::acquireMediaDevice so that the media devices can be registered with the pipeline handler, so that they can be automatically added to the devnum map for the v4l2 compatibility layer to use. Die fatally if any camera trying to be registered has not acquired any media devices via acquireMediaDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: raspberrypi: Acquire media devices with acquireMediaDevicePaul Elder
Media devices should be acquired by pipeline handlers via PipelineHandler::acquireMediaDevice so that the media devices can be registered in the pipeline handler so that they can be automatically added to the devnum map for the v4l2 compatibility layer to use. Make the raspberrypi pipeline handler do this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: raspberrypi: Simplify format fetchingPaul Elder
Simplify code for looking up PixelFormatInfo using a V4L2 format by using the new PixelFormatInfo lookup function based on V4L2 format. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: PixelFormatInfo: Add functions stride and frameSizePaul Elder
Add member functions to PixelFormatInfo for calculating stride and frame size. This will simplify existing code that calculates these things. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: StreamConfiguration: Add frameSize fieldPaul Elder
In addition to the stride field, we want the pipeline handler to be able to declare the frame size for the configuration. Add a frameSize field to StreamConfiguration for this purpose. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: PixelFormatInfo: Add v4l2 lookup functionPaul Elder
Add a lookup function for PixelFormatInfo that takes a V4L2PixelFormat. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: V4L2VideoDevice: Add tryFormatPaul Elder
Add tryFormat and its variations (meta, single-plane, multi-plane) to V4L2VideoDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: formats: Add fields to info to ease calculating stridePaul Elder
Packed formats make it difficult to calculate stride as well as frame size with the fields that PixelFormatInfo currently has. bitsPerPixel is defined as the average number of bits per pixel, and only counts effective bits, so it is not useful for calculating stride and frame size. To fix this, we introduce a concept of a "pixel group". The size of this group is defined as the minimum number of pixels (including padding) necessary in a row when the image has only one column of effective pixels. The pixel group has one more attribute, that is the "bytes per group". This determines how many bytes one pixel group consumes. These are the fields pixelsPerGroup and bytesPerGroup that are defined in this patch. Defining these two values makes it really simple to calculate bytes-per-line, as ceil(width / pixelsPerGroup) * bytesPerGroup, where width is measured in number of pixels. The ceiling accounts for padding. The pixel group has another contraint, which is that the pixel group (bytesPerGroup and pixelsPerGroup) is the smallest repeatable unit. What this means is that, for example, in the IPU3 formats, if there is only one column of effective pixels, it looks like it could be fit in 5 bytes with 3 padding pixels (for a total of 4 pixels over 5 bytes). However, this unit is not repeatable, as at the 7th group in the same row, the pattern is broken. Therefore, the pixel group for IPU3 formats must be 25 pixels over 32 bytes. Clearly, pixelsPerGroup must be constant for all planes in the format. The bytesPerGroup then, must be a per-plane attribute. There is one more field, verticalSubSampling, that is per-plane. This is simply a divider, to divide the number of rows of pixels by the sub-sampling value, to obtain the number of rows of pixels for the subsampled plane. For example, for something simple like BGR888, it is self-explanatory: the pixel group size is 1, and the bytes necessary is 3, and there is only one plane with no (= 1) vertical subsampling. For YUYV, the CbCr pair is shared between two pixels, so even if you have only one pixel, you would still need a padded second Y, therefore the pixel group size is 2, and bytes necessary is 4 (as opposed to 1 and 2). YUYV also has no vertical subsampling. NV12 has a pixel group size of 2 pixels, due to the CbCr plane. The bytes per group then, for both planes, is 2. The first plane has no vertical subsampling, but the second plane is subsampled by a factor of 2. The IPU3 formats are also self-explanatory, as they are single-planar, and have a pixel group size of 25, consuming 32 bytes. Although a comment in the driver suggests that it should be 50 and 64, respectively, this is an attribute of the driver, and not the format, so this shall be set by the ipu3 pipeline handler. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: Add NV24 and NV42, and reorder NV formatsPaul Elder
Add formats for NV24 and NV42. While at it, reorder the NV formats so that NV12 and NV21 come first, followed by NV16, NV61, NV24, and NV42. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-09libcamera: ipu3: cio2: Make use of utils::map_keys() helperNiklas Söderlund
Use a helper instead of local code to retrieve all keys from a map. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-09libcamera: utils: Add map_keys() functionLaurent Pinchart
Add a map_keys() function to the utils namespace to extract keys from a map. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Niklas: change return type to std::vector instead of std::set] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-08libcamera: Use Size::isNull()Laurent Pinchart
Use the new Size::isNull() function through the code base to replace manual checks. While the new code isn't equivalent, as isNull() checks that both width and height are zero, it catches the same conditions in practice. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-07android: camera_device: Remove single buffer restriction.Kieran Bingham
A capture request is no longer limited to a single output buffer. Remove the limitation, but (for now) keep the check to ensure that at least one buffer is always provided. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-07android: camera_device: Add buffers for each stream to RequestsKieran Bingham
Construct a FrameBuffer for every buffer given in the camera3Request and add it to the libcamera Request on the appropriate stream. The correct stream is obtained from the private data of the camera3_stream associated with the camera3_buffer. Comments regarding supporting only one buffer are now removed, and FrameBuffers have their lifetime tracked in the Camera3RequestDescriptor to ensure they are released when the Request is completed. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Maintain a vector of CameraStreamKieran Bingham
Introduce a vector storing a CameraStream to track and maintain state between an Android stream (camera3_stream_t) and a libcamera Stream. Only the index of the libcamera stream is stored, to facilitate identifying the correct index for both the StreamConfiguration and Stream vectors. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Create the Request and Camera3RequestDescriptor togetherKieran Bingham
Move the construction of the Request higher in the code flow so that multiple buffers and streams can be added where required. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Simplify FrameBuffer construction from a buffer_handle_tKieran Bingham
Move the code which constructs a FrameBuffer from the Android buffer handle to it's own function to simplify the code flow and readability. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Support multiple stream configurationsKieran Bingham
Create an initial Camera Configuration using an empty role set, and populate the StreamConfigurations manually from each of the streams given by the Android camera3_stream_configuration_t stream_list. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>