summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-28ipa: raspberrypi: Fix default frame durations calculationNaushir Patuck
Fix a bug in the default frame durations calculation where the min/max values are swapped round. This is a rarely travelled code path, so has not actually caused a reported failure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Ensure shutter speed and gain are clipped in the AGCNaushir Patuck
Make a copy of the CameraMode structure on a switch mode call. This replaces the existing lastSensitivity_ field. Limit the AGC gain calculations to the minimum value given by the CameraMode structure. The maximum value remains unclipped as any gain over the sensor maximum will be made up by digital gain. Rename clipShutter to limitShutter for consistency, and have the latter limit the shutter speed to both upper and lower bounds. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Use the new sensor limits fields in CameraModeNaushir Patuck
Use the new analogue gain and shutter speed limit fields in the ipa code when reporting back the control value limits and calculating the analogue gain code to use. This also replaces the now unused (and removed) maxSensorGainCode_ field. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Add sensor mode limits to CameraModeNaushir Patuck
Add fields in the CameraMode structure to capture the mode specific limits for analogue gain and shutter speed. For convenience, also add fields for minimum and maximum frame durations. Populate these new fields when setting up the CameraMode structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-26libcamera: v4l2_device: openat(2) with O_CLOEXEC to cleanup after exec(3)Elias Naur
When an executable using libcamera calls exec(3) while a camera is in use, file descriptors corresponding to the V4L2 video devices are kept open has they have been created without O_CLOEXEC. This results in the video devices staying busy, preventing the new executable from using them: [91] ERROR V4L2 v4l2_videodevice.cpp:1047 /dev/video0[149:cap]: Unableto set format: Resource busy Fix this by opening video devices with O_CLOEXEC, which is generally a good idea in libraries. Signed-off-by: Elias Naur <mail@eliasnaur.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-21libcamera: camera: Ensure queued requests are invalidKieran Bingham
Invalid, or not correctly reset requests can cause undefined behaviour in the pipeline handlers due to unexpected request state. If the status has not been reset to Request::RequestPending, it is either not new, or has not been correctly procesed through Request::reuse(). This can be caught early by validating the status of the request when it is queued to a camera. Reject invalid requests before processing them in the pipeline handlers. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21meson: libcamera: Report IPA signature methodKieran Bingham
Use the Configuration section to report which dependency is used to handle IPA module signatures. In the event that it is not found, report directly in the configuration that modules are Isolated. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21ipa: libipa: Add OV2685 Camera Sensor HelperKieran Bingham
Provide a CameraSensorHelper for the OV2685, along with the corresponding camera sensor properties. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21ipa: libipa: Add OV5647 Camera Sensor HelperKieran Bingham
Provide a CameraSensorHelper for the OV5647 as used in the Raspberry Pi Camera Module v1. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21py: cam: Fix demosaic overflow issueTomi Valkeinen
The demosaic code first expands the buffer datatype to uint16, and then shifts the data left so that the 8, 10 and 12 bitspp formats all become 16 bitspp. It then, eventually, uses np.einsum to calculate averages, but this averaging sums multiple uint16 values together, and stores them in uint16 storage. As in the first step we shifted the values left, possibly getting values close to the maximum of uint16 range, we, of course, overflow when summing them together. This leads to rather bad looking images. Fix this by dropping the original shift. It serves no purpose, and is probably a remnant of some early testing code. This way the largest numbers we are summing together are 12 bit values, and as we use a 3x3 window from which we fetch values, for a single rgb plane, the max number of 12 bit values is 5 (for green). Sum of 5 12 bit values is well below the 16 bit maximum. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21ipa: raspberrypi: Fix crash under LTODave Jones
When compiled with LTO (the default on Ubuntu), the global static objects camHelpers and algorithms cause a crash in raspberrypi_ipa_proxy at runtime as they're not allocated by the time the registration routines execute. This is a fairly crude fix which just converts the global static objects into local static objects inside an equivalently named function. Signed-off-by: Dave Jones <dave.jones@canonical.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21meson: Fix git version parsingLaurent Pinchart
When extracting the build metadata from the git version, we use the string strip() method to remove the version prefix. This is incorrect, as the strip() method takes a set of characters to be removed, not a literal string. Fix it by splitting the git version string on the '+' character and keeping the suffix. Fixes: 02518e598e8f ("meson: Rewrite .replace usage") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21libcamera: base: Make the registration of log categories atomicNicolas Dufresne
Logger::create() is not currently thread safe and causes crashes noticeable on RaspberryPi 4. This adds a mutex around the creation of categories. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-09meson: Align handling of build metadataMichael Riesch
The build metadata is split off correctly from the version string obtained with utils/gen-version.sh, but for the meson project version this step is not carried out. However, since libcamera uses Semantic Versioning, it should be possible to add build metadata to the meson project version. Align the handling of the build metadata to resolve this mismatch. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-09libcamera: converter: Check converter validitySuhrid Subramaniam
The ConverterFactoryBase::create() function returns a nullptr when no converter is found. The only caller, SimpleCameraData::init(), checks if the converter is valid with isValid(), but doesn't check if the pointer is null, which can lead to a crash. We could check both pointer validity and converter validity in the caller, but to limit the complexity in callers, it is better to check the converter validity in the create() function and return a null pointer when no valid converter is found. Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-07ipa: raspberrypi: imx296: Minor tuning updatesDavid Plowman
Some updates to the tuning for the imx296 sensors. For the colour variant: * Minor change to the AWB curve, making things a little less green. * Updated CCMs that reduce colour saturation to a more accurate level. Thanks to Dr. Rolf Henkel for these measurements and calculations. * Sharpening has been toned down quite a lot. * rpi.focus algorithm added so that the focus measure can be accessed. The sharpening and focus changes are applied to the mono version of the sensor too as we expect similar characteristics. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: agc: Fix overflow in Y value calculationDavid Plowman
The maxVal variable in the computeInitialY function needs to be a uint64_t, otherwise the subsequent multiplications in the function can overflow on relatively high resolution images (when the counts in the regions go over 16 bits). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: raspberrypi: Iterate over all Unicam instances in match()Naushir Patuck
On Raspberry Pi Compute Module platforms, it is possible to attach a single camera device only to the secondary Unicam port. The current logic of PipelineHandlerRPi::match() will return a failure during enumeration of the first Unicam media device (due to no sensor attached, or sensor failure) and thus the second Unicam media device will never be enumerated. Fix this by looping over all Unicam instances in PipelineHandlerRPi::match() until a camera is correctly registered, or return a failure otherwise. Reported-on: https://github.com/raspberrypi/libcamera/issues/44 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: raspberrypi: Add a Unicam timeout override config optionsNaushir Patuck
Add a new parameter to the pipeline handler config file named "unicam_timeout_value_ms" to allow users to override the automatically computed Unicam timeout value. This value is given in milliseconds, and setting a value of 0 (the default value) disables the override. An example use of this parameter would be if an application configured a RAW stream, and provides buffers for the stream on every request. If the application holds off on sending requests for a particular reason (e.g. a timelapse use case), then we will possibly hit the watchdog timeout as it is only a small multiple of the frame length. This override allows an application to select a larger value with the knowledge that it may space requests longer than the calculated timeout value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: Better heuristics for calculating Unicam timeoutNaushir Patuck
The existing mechanism of setting a timeout value simply uses the maximum possible frame length advertised by the sensor mode. This can be problematic when, for example, the IMX477 sensor can use a frame length of over 600 seconds. However, for typical usage the frame length will never go over several 100s of milliseconds, making the timeout very impractical. Store a list of the last 10 frame length values requested by the AGC. On startup, and at the end of every frame, take the maximum frame length value from this list and return that to the pipeline handler through the setCameraTimeoutValue() signal. This allows the timeout value to better track the actual sensor usage. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: ipa: raspberrypi: Change Unicam timeout handlingNaushir Patuck
Add an explicit helper function setCameraTimeout() in the pipeline handler to set the Unicam timeout value. This function is signalled from the IPA to set up an appropriate timeout. This replaces the maxSensorFrameLengthMs value parameter returned back from IPARPi::start(). Adjust the timeout to be 5x the maximum frame duration reported by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-06ipa: rkisp1: lsc: Fix integer division errorJacopo Mondi
The RkISP1 implementation of the LensShadingCorrection algorithm has been made adaptive to the scene color temperature in commit 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm"). The LSC algorithm interpolates the correction factors using the table's reference color temperatures. When calculating the interpolation coefficients, an unintended integer division makes both coefficient zeros resulting in a completely black image. Fix this by type casting to double one of the division operands. Fixes: 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm") Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2023-03-06libcamera: camera_manager: Stop exponential explosive calls to ↵Sophie Friedrich
createPipelineHandlers Currently the function `createPipelineHandlers` connects itself to the `devicesAdded` signal at the end of each call. As the Signal object supports multiple non-unique listeners connected to it, the former function would be called exponentially often with each new emitted event on `devicesAdded` (i.e. with udev plugging in a new camera) Fix it by connecting the createPipelineHandlers() slot to `devicesAdded` signal in CameraManager::Private::init() instead. This will prevent the slot getting connected multiple times to the `devicesAdded` signal. Signed-off-by: Sophie Friedrich <dev@flowerpot.me> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-06Documentation: guides: pipeline-handler: Fix spelling errorAdvait Dhamorikar
The pipeline handler writers guide incorrectly references the VividCameradata::init() impelementation with a spelling error. Fix spelling of "impelementation" in the pipeline handler development guide. Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-01libcamera: Keep using syslog for isolated IPA modulesMatthias Fend
Currently it is not possible to display debug output from an isolated IPA module. The standard descriptors are all closed and any specified log file is explicitly deactivated for the IPA module. Since libcamera and the isolated IPA module are separate processes, they cannot write to the same file. However, if syslog is used, then this would be possible. If syslog is specified as a log file, then this is left as it is for the isolated IPA module. Signed-off-by: Matthias Fend <matthias.fend@emfend.at> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-03-01utils: checkstyle.py: Don't run commit title checker on staged commitsPaul Elder
When creating a new commit, there is no title, so the title checker complains that the title isn't compliant and the commit cannot be created if checkstyle is run as a pre-commit hook. Fix this by skipping the title checker when run on staged changes. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-15apps: Return std::optional<> from StreamKeyValueParser::parseRole()Barnabás Pőcze
Instead of having bool return type and an out parameter, use std::optional<libcamera::StreamRole> to return from StreamKeyValueParser::parseRole(). Meanwhile at it, re-word an existing comment to make it lucid. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-15pipeline: raspberrypi: Always use ColorSpace::Raw for raw streamsDavid Plowman
Commit 613d5402673e ("pipeline: raspberrypi: Fix handling of colour spaces") adjusts the colorspace to ColorSpace::Raw for raw streams. However, if the colorspace is not requested for raw streams(nullopt), we should still set the colorspace to ColorSpace::Raw, for raw streams. Fixes: 613d5402673e ("pipeline: raspberrypi: Fix handling of colour spaces") Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-12Documentation: Small typo fixPavel Machek
Out should really be output. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-10android: jpeg: Add JEA implementationHarvey Yang
This patch adds JEA implementation to replace libjpeg in CrOS platform, where hardware accelerator is available. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-10android: jpeg: Pass StreamBuffer to Encoder::encoderHarvey Yang
To prepare for support of the JEA encoder in a following commit, which will need to access the buffer_handle_t of the destination buffer, pass the StreamBuffer to the Encoder::encoder() function. As the StreamBuffer contains the source FrameBuffer and the destination Span, drop them from the function arguments and access them directly from the StreamBuffer. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-10android: jpeg: Add meson.build in src/android/jpegHarvey Yang
To further control sources in jpeg to build based on the platform, this patch adds meson.build in src/android/jpeg directory. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-10android: framebuffer: Add HALFrameBuffer and replace FrameBufferHarvey Yang
HALFrameBuffer is derived from FrameBuffer with access to buffer_handle_t, which is needed for JEA usage. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-10libcamera: framebuffer: Allow inheritance of FrameBufferHarvey Yang
To add buffer_handle_t access in android, this patch allows inheritance of FrameBuffer to add a derived class in android. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-09libcamera: Remove transform from V4L2SubdeviceFormatJacopo Mondi
Commit 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at setFormat()") extended the CameraSensor::setFormat() function to apply vertical/horizontal flips on the sensor based on the supplied Transform. To pass the Transform to the function the V4L2SubdeviceFormat structure has been augmented with a Transform member. However as the newly added Transform is not used at all in the V4L2Subdevice class, it should not be part of V4L2SubdeviceFormat. Fix that by removing the transform field from V4L2SubdeviceFormat and pass it as an explicit parameter to CameraSensor::setFormat(). Fixes: 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at setFormat()) Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-02-09pipeline: raspberrypi: Drop unused codeLaurent Pinchart
Commit 1a614866a29c ("libcamera: camera_sensor: Validate Transform") has removed usage of the RPiCameraData::supportsFlips_ but hasn't removed the field itself, nor its initialization. Drop those as they're unused. Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-09pipeline: ipu3: Drop unused codeLaurent Pinchart
Commit 1a614866a29c ("libcamera: camera_sensor: Validate Transform") has removed usage of the IPU3CameraData::rotationTransform_ but hasn't removed the field itself, nor its initialization. Drop those as they're unused. Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-09libcamera: camera_sensor: Fix typo in commentLaurent Pinchart
Fix a typo introduced in a comment when refactoring transformation handling in the CameraSensor class. Fixes: 1a614866a29c ("libcamera: camera_sensor: Validate Transform") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-09libcamera: camera_sensor: Demote flip support message to DebugLaurent Pinchart
The CameraSensor::validateSensorDriver() function prints a Warning message when the camera sensor doesn't support flips. We don't mandate flip support and can run without it without any problem, so a warning is too harsh. Demote it to a Debug message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-02-09libcamera: internal: tracepoints: Use correct include directiveUmang Jain
libcamera uses double quotes "..." for #include directives for internal headers. While at it, move the request internal header include to the right location. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Normalise region sums to 16-bitsNaushir Patuck
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to know this bit-depth when computing the Y value for the image. Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all region sums to 16-bits when filling the Statistics structure. AWB and ALSC are agnostic about pipeline depth, so do not need changing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Use the generic statistics structure in the algorithmsNaushir Patuck
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to shared_ptr<RPiController::Statistics>. This removes any hardware specific header files and structures from the algorithms source code. Add a new function in the Raspberry Pi IPA to populate the generic statistics structure from the values provided by the hardware in the bcm2835_isp_stats structure. Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the generic statistics structure appropriately in their calculations. Additionally, remove references to any hardware specific headers and defines in these source files. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: awb: Delay release of the statistics bufferNaushir Patuck
Release the statistics buffer after running the through the AWB calculations. Only the "counted" statistics are copied out to a local structure, so keeping the statistics buffer allows the algorithm to see the "uncounted" statistics as well. This is currently handled by hard-coding the total number of statistics regions regions based on the structure definition in the bcm2835_isp_stats structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: histogram: Add a constructor for an empty histogramNaushir Patuck
Add a default constructor to the RPiController::Histogram class that creates an empty histogram. Since this is a cumulative histogram, push a value of 0 into the first (and only) bin to signify this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Generalise statisticsNaushir Patuck
At present, the controller algorithms access the bcm2835_isp_stats structure, which is hardware specific. It would be desirable to abstract out the statistics structure to remove hardware specific headers from the algorithms source files. Define a new templated RegionStats class that encompasses region based statistics generated by the ISP. For the VC4 ISP, this can be used to hold RGB sums and focus FoM values. Define a new Statistics structure that holds all the VC4 ISP statistics output. This includes AGC histograms, AGC/AWB region sums and focus FoM regions. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-01libcamera v0.0.4Kieran Bingham
Bugfixes: * libcamera: yaml_parser: Use C locale * libcamera: base: utils: Support C libraries lacking locale support * py: cam.py: Fix duplicate metadata output if more than one stream * libcamera: camera: Fix validateColorSpaces to choose main colour space * pipeline: raspberrypi: Fix handling of colour spaces Core: * test: Fix/Enable testing with ASan * test: Remove redundant pipeline tests * meson: Only build pipeline handlers needed in host architecture * meson: Add 'all' choice to pipelines option * utils: checkstyle.py: Add commit title checker * libcamera: ipa_module: Relax ipaModuleInfo symbol size check * pipeline: Support configuration file paths ipa: * camera_sensor: Improve h/v flip handling * camera_sensor: Add AR0521 Sensor support * camera_sensor: Add OV4689 Sensor support * camera_sensor: Add support for OmniVision OV8858 * raspberrypi: Support Autofocus with PDAF * raspberrypi: Support for the Sony IMX708 sensor * rkisp1: Raise maximum analogue gain pipeline: * raspberrypi: Support parameters from a configuration file * raspberrypi: Add a parameter to disable startup drop frames * libcamera: rkisp1: Add support for Transform apps: * gstreamer: Add bayer8 support to libcamerasrc * qcam: Show string representation of pixel format ABI Compliance: * abi-compliance-checker reports 100% ABI and API compatibility with with v0.0.3 Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-31pipeline: raspberrypi: Add a parameter to disable startup drop framesNaushir Patuck
Add a new pipeline config parameter "disable_startup_frame_drops" to disable any startup drop frames, overriding the IPA request. When this parameter is set, it allows the pipeline handler to run with no internally allocated Unicam buffers ("min_unicam_buffers"). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-31pipeline: raspberrypi: Read config parameters from a fileNaushir Patuck
Add the ability to read the platform configuration parameters from a config file provided by the user through the LIBCAMERA_RPI_CONFIG_FILE environment variable. Use the PipelineHandler::configurationFile() helper to determine the full path of the file. Provide an example configuration file named example.yaml. Currently two parameters are available through the json file: "min_unicam_buffers" The minimum number of internal Unicam buffers to allocate. "min_total_unicam_buffers" The minimum number of internal + external Unicam buffers that must be allocated. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-31pipeline: raspberrypi: Reorder startup drop frame initialisationNaushir Patuck
Reorder the code such that the IPA requested startup drop frames count is available before the pipeline handler allocates any stream buffers. This will be used in a subsequent change to stop Unicam buffer allocations if there are no startup drop frames required and the application has configured a raw stream and always provides buffers for it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-31pipeline: raspberrypi: Add a pipeline config structureNaushir Patuck
Add a configuration structure to store platform specific parameters used by the pipeline handler. Currently, these only store Unicam buffer counts, replacing the hardcoded static values in the source code. In subsequent commits, more parameters will be added to the configuration structure, and parameters will be read in through a config file. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>