| Age | Commit message (Collapse) | Author |
|---|
|
mode_factor_ does not need to be atomic - it is set by SwitchMode()
which runs synchronously.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
SetBrightness() and SetContrast() are only called synchronously so
there is no need for brightness_ and contrast_ to be atomic.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
SetSaturation() gets called synchronously so there is no need for
saturation_ to be atomic.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a couple of places where notify_one() was called with the lock
held. Also restartAsync doesn't need the lock for its entire duration.
This change exactly matches commit db552b0b925a ("libcamera: ipa:
raspberrypi: ALSC: Improve locking in a few places") where we do the
same for ALSC (the asynchronous thread arrangement there is identical).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
AWB settings get updated synchronously with the main thread, so the
settings_mutex_ and associated locking can be removed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 7208e70211a6 ("libcamera: ipu3: Always use sensor full frame size")
changed the CIO2 configuration procedure to always select the full
sensor resolution to work around an ImgU configuration issue, as
reported in the todo item introduced in said commit.
When capturing a RAW stream only and the ImgU is not involved, the CIO2
has to be configured with the requested stream size to avoid adjusting
the stream to the sensor resolution.
As an example, capturing a raw frame smaller than the sensor resolution
with this patch applied results in the stream configuration to be
correctly assigned.
$ cam -c1 -swidth=1056,height=784,role=raw
ipu3.cpp:207 CIO2 configuration: 1056x784-SGRBG10_IPU3
ipu3.cpp:222 Validating stream: 1056x784-SGRBG10_IPU3
ipu3.cpp:233 Assigned 1056x784-SGRBG10_IPU3 to the raw stream
Without this patch the same operation results in the stream resolution
to be adjusted to the sensor resolution.
$ cam -c1 -swidth=1056,height=784,role=raw
ipu3.cpp:201 CIO2 configuration: 4224x3136-SGRBG10_IPU3
ipu3.cpp:216 Validating stream: 1056x784-SGRBG10_IPU3
ipu3.cpp:227 Assigned 4224x3136-SGRBG10_IPU3 to the raw stream
ipu3.cpp:297 Stream 0 configuration adjusted to 4224x3136-SGRBG10_IPU3
Camera configuration adjusted
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE result
metadata.
Report ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF as the Camera HAL
does not support the generation of an hot pixel correction map.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_SENSOR_TEST_PATTERN_MODE result metadata.
Report the only supported value of ANDROID_SENSOR_TEST_PATTERN_MODE_OFF.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the crop region for every completed request.
The crop region is initialized as the sensor's analogue crop
rectangle and updated when a Request with a new region completes.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys CTS test
enforces the presence of the auto focus mode in the preview
request template.
Add the only supported mode AF_MODE_OFF in the generated template.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera HAL does currently list AF_MODE_OFF as the only supported
auto-focus mode in the ANDROID_CONTROL_AF_AVAILABLE_MODES static
metadata. For this reason reporting AF_MODE_AUTO as scene override
is wrong.
At the moment scene override is disabled in the Camera HAL, but this
is worth a fix nonetheless.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION result
metadata.
Report 0 as the current value for
ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION in the result metadata
pack.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_COLOR_CORRECTION_ABERRATION_MODE result
metadata.
Report the only supported value of
ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The cam option --capture=N is suppose to only capture N requests. But if
the processing done for each request is large (such as writing it to a
slow disk) the current implementation could queue more than N requests
before the exit condition is detected and capturing stopped.
Solve this by only queueing N requests while still waiting for N
requests to complete before exiting.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Cam uses libevent to deal with threads and idle loop while still
implementing its own event queue. This creates issues when the event
loop is terminated as it might get stuck in the idle loop if exit() is
called while the thread is busy with dispatchCalls().
Solve this by removing the custom event execution and instead injecting
the calls as events to the base event loop.
Reported-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The 'event' variable name is usually used for events added to the base
event loop, not the loop itself. Rename the struct event_base member to
base_ as a preparation for future work adding events to the loop.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the IPU3Frames helper to share parameters and statistics buffers
with the IPA. Track which parameter and statistic buffer is used for
which request and make sure the parameter buffers is filled in by the
IPA before it's needed and that the statistic buffer is consumed and
meta data generated before completing the request.
With this change the IPU3 pipeline is prepared to fully operate with an
IPA component.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a helper class to aid in associating a parameter and statistic
buffer with each request queued to the pipeline. The helper helps with
tracking the state of the extra buffers and in completing the request
once all extra processing is done.
This change only adds the helper more work is needed to integrate it
with the pipeline and an IPA.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Map and unmap the parameters and statistic buffers in the IPA when the
pipeline handler allocates and frees the buffers.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of preparing for buffer importing allocate buffers that can be
used by an IPA.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Attach to the IPA and allow it to push V4L2 controls that apply to the
camera sensor. The IPA is not fully integrated in the pipeline as
statistics and parameters buffers are not yet allocated, processed by
the IPA nor queued to the hardware.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an empty IPA skeleton for the IPU3 pipeline. The skeleton IPA
handles the flow of parameter and statistic buffers but does not read or
write anything in the buffers. It also allows the IPA to set sensor
controls but does not implement any logic to set optimal values and
instead sets the V4L2 exposure and gain controls to max and keeps them
at that setting.
This IPA is meant as a base to allow the pipeline handler to be wired up
to an IPA. The image algorithms can then later be added to the IPA
independently from also having to add plumbing to the pipeline handler.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Propagate the frameStart event whenever the CSI-2 receiver in the CIO2
pipeline generates one.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When adding IPA plumbing to the IPU3 pipeline handler it will be needed
to track which raw buffer was queued to the CIO2 for a specific request.
Currently if using an internally allocated raw buffer the FrameBuffer is
not exposed outside the CIO2Device as it was not needed. Prepare for the
IPA by exposing which internal raw buffer is picked for each request,
later changes will associate this with a Request.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the parameters video device to the data structure of the ImgUDevice.
Even if the video device is configured, prepared to import buffers and
started no buffers are ever queued to it so it does not yet effect the
capture. Nor is does this change hinder the current capture mode to
function.
This is done in preparation to attach an IPA to the IPU3 pipeline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no reason to expose and call a separate configureStat() when
the statistics video device can be configured with the exact same
parameters as part of configure(). Move the configuration internally to
the ImgUDevice simplifying the interface, there is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add kernel header and format definitions for the Intel IPU3. The header
has been exported from a v5.9 kernel using scripts/headers_install.sh.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a utils::reverse() function that creates an adapter wrapping in
iterable, such that range-based iteration over the adapter iterates over
the iterable in reverse order.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The presence of mandatory and optional controls is checked in
CameraSensor::validateSensorDriver() by trying to retrieve them. This
causes an error message to be printed in the V4L2Device class if an
optional control isn't present, while this isn't an error.
To fix this, use the control idmap reported by the V4L2Device to check
for controls availability. The function can now print the whole list of
missing controls, making debugging easier.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
YUV sensors don't provide the necessary information to fill
CameraSensorInfo, as they include an ISP and provide a higher-level API
that doesn't always expose low-level information. The CameraSensor class
makes low-level V4L2 controls mandatory for all sensors, which prevents
usage of YUV sensors with the simple pipeline handler.
Make CameraSensor::sensorInfo() available for raw sensors only. This
won't introduce any regression in pipeline handlers that currently use
the sensorInfo() function as they all operate with raw sensors, and
won't be a limitation for the simple pipeline handler as well as it
doesn't use sensor info. If part of the sensor info (such as the active
pixel array size for instance) becomes useful to expose for YUV sensors
in the future, the sensorInfo() function can be extended to report that
information only and skip data that is only available for raw sensors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Bayer pattern is retrieved based on the media bus formats supported
by the sensor, when registering camera sensor properties. To prepare for
its usage elsewhere in the CameraSensor class, store it in a private
member variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In order to provide an optimal split between shutter speed and gain, the
AGC must know the maximum allowable shutter speed, as limited by the
maximum frame duration (either application provided or the default).
Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The
IPA provides the maximum shutter speed for AGC calculations. This
applies to both the manual and auto AGC modes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The existing framerate/vblank calculations did not account for the
sensor mode limits. This commit extracts vblank limits from the sensor
v4l2 controls, and stores it in the camera modes structure.
Exposure and vblank value calculations now use values clamped to the
sensor mode limits. The libcamera::controls::FrameDurations metadata
return values now reflect the minimum and maximum after clamping.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Sensor frame length is made up of active and inactive (blanking) lines.
The minimum and maximum frame length values may be used by pipeline
handlers to limit frame durations based on the sensor mode capabilities.
Store the minimum and maximum allowable frame length values (in lines)
in the CameraSensorInfo structure. These values are computed in
CameraSensor::sensorInfo() by querying the sensor subdevice
V4L2_CID_VBLANK control limits. This in turn means that V4L2_CID_VBLANK
is now a mandatory subdevice control.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the V4L2_CID_VBLANK control to the list of mandatory controls
the sensor driver has to report and document the new requirement.
The vertical blanking control is used to calculate the frame duration.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPA_RESULT_SENSOR_PARAMS
Fixup logic when handling IPA_RESULT_SENSOR_PARAMS where we must always
overwrite the parameters if provided by IPA. In the current codebase,
this only happens once on startup, so there is no effective functional
difference. But this change allows the option for the IPA to request new
sensor parameters per-mode if required.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the enum values to indicate pipeline handler -> IPA actions
(IPA_CONFIG_*) and IPA -> pipeline handler return results (IPA_RESULT_*).
Additionally, provide more descriptive names for these values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test all of the present methods including the newly implemented
`fromV4L2PixelFormat`, as well as the new operators `==/!=`.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To transpose a BayerFormat means to flip it over its main diagonal.
For example:
G B G R
->
R G B G
The main diagonal goes from the top left to the bottom right. This
means, that the only two orders affected by a transpose are GBRG & GRBG.
When a transpose is used in combination with horizontal and/or vertical
flips it is performed after the flips. Therefore add the functionality
by switching GBRG (index 1) with GRBG (index 2), after the flips have
been applied.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Enable to test two Bayer formats for equality by checking if the order
of the color channels, the bit depth of the pattern, and the packing
scheme match. Additionally, add the reverse operation (!=), which negates
the equality test result.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The new `fromV4l2PixelFormat` static member function renders an old
BayerFormat constructor useless, remove it together with the
`v4l2ToBayer` mapping table. The new function searches for a matching
mapped value instead of a matching key, therefore the `bayerToV4l2`
table is sufficient.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a static member function to get the corresponding BayerFormat from a
given V4L2PixelFormat. The motivation behind this patch is to align the
overall structure of the BayerFormat class with other parts of the code
base, such as the V4L2PixelFormat class.
The downside of this change is a slightly worse time complexity, but
the upside is a smaller codebase and lower memory consumption. As the
function is probably not used very frequently, I tend to favor the
mentioned upsides.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Geometry classes generally have two sets of functions, one that operates
on the object and modifies it (e.g. Rectangle::scaleBy()), and one that
performs the same operations by instead return a modified copy of the
object, leaving the original untouched (e.g.Rectangle::scaledBy()). As
the names are close, they can easily be mistaken, with the const version
used instead of the in-place version.
To catch these errors at compile time, mark the const versions with
__nodiscard, as there is no use case for calling them without using the
result of the call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The [[nodiscard]] attribute has been added to C++17. It can thus be used
inside libcamera, but would prevent applications compiled for C++14 to
use libcamera if the attribute was used in public headers.
To offer this feature when the application is compiled with a
recent-enough C++ version, as well as for compiling libcamera itself,
add a __nodiscard macro that expands as [[nodiscard]] when using C++17
or newer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The list of the available thumbnail sizes is generated from the
list of available JPEG resolution, one for each aspect ratio.
This change fixes the CTS test
android.hardware.cts.CameraTest#testJpegThumbnailSize
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix a wrong comment.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Running the tests failed with the following error on buffer import:
"Failed to capture enough frames (got 8 expected at least 8)"
This indicates that the test did in fact capture enough frames as
desired by the test. Update the comparison on both buffer-import and
capture tests accordingly.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are build environments where the wrap-based download is prohibited
by "--wrap-mode nodownload". In such cases, libyuv needs to be provided
by the build environment. To support this, this changes the meson file
to first try using a local libyuv, and if it fails, download libyuv code
and build with it as a fallback.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Android HAL adaptation layer may need image processing, for
example, scaling and format conversion. Libyuv is a general image
processing. This adds libyuv to subprojects, so that it is forked
locally and can be used with Android HAL implementation code.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
QUERYBUF
QUERYBUF doesn't require the memory field to be pre-filled.
Also, V4L2VideoDevice::createBuffer uses dmabuf file descriptors, thus
using V4L2_MEMORY_MMAP makes things confusing, so remove it.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
