summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-28libcamera: v4l2_subdevice: Implement getSelection()Jacopo Mondi
Implement V4L2Subdevice::getSelection() to support retrieving selection rectangles from the V4L2 subdevice. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: v4l2_videodevice: Expose setSelection()Jacopo Mondi
Expose V4L2Videodevice::setSelection() method and drop V4L2Videodevice::setCrop() and V4L2Videodevice::setComopse() as wrapping each target with a single function does not provide any benefit. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: v4l2_subdevice: Expose setSelection()Jacopo Mondi
Expose V4L2Subdevice::setSelection() method and drop V4L2Subdevice::setCrop() and V4L2Subdevice::setComopse() as wrapping each target with a single function does not provide any benefit. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: pipeline: vimc: Name camera based on sensor modelLaurent Pinchart
Use the sensor model to create the camera name. The resulting name should still be "VIMC Sensor B", but prepares for support of Sensor A. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28test: camera_sensor: Test the model() functionLaurent Pinchart
Verify that the sensor model matches the expected value. The whole model extraction heuristic isn't fully tested as that would require being able to inject different entity names. It is still useful as an initial step. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: camera_sensor: Add model() functionLaurent Pinchart
Add a new model() function to the CameraSensor class to report the camera sensor model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: v4l2_device: Simplify usage of getControls()Laurent Pinchart
The V4L2Device::getControls() function takes a ControlList that needs to be pre-populated with dummy entries for the controls that need to be read. This is a cumbersome API, especially when reading a single control. Make it nicer by passing the list of V4L2 controls as a vector of control IDs, and returning a ControlList. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-04-28libcamera: controls: Add rectangle and size control typesLaurent Pinchart
Add two control types to store rectangles and sizes. These will be useful for the properties related to the pixel array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28ipa: vimc: Validate configuration file in init()Laurent Pinchart
Make sure we can open the configuration file passed to the init() function, and return an error otherwise. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28test: ipa: ipa_interface: Pass configuration file to IPA init()Laurent Pinchart
Pass the vimc IPA dummy configuration file to the IPA init() function. This will be used by the IPA to validate the init() call. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28libcamera: pipeline: vimc: Pass configuration file to IPA init()Laurent Pinchart
Pass the vimc IPA dummy configuration file to the IPA init() function. This will be used by the IPA to validate the init() call. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: vimc: Add a dummy configuration file to the vimc IPALaurent Pinchart
The file will be used to test the corresponding APIs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: Pass IPA initialization settings to IPAInterface::init()Laurent Pinchart
Add a new IPASettings class to pass IPA initialization settings through the IPAInterface::init() method. The settings currently only contain the name of a configuration file, and are expected to be extended later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: ipa_manager: Return an IPAProxy from createIPA()Laurent Pinchart
In order to provide pipeline handlers with IPA-related helpers on top of IPAInterface, return the IPAProxy instance from IPAManager::createIPA(). No change is required in the pipeline handlers as the IPAInterface that was previously returned is implemented by an IPAProxy instance already. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28libcamera: ipa_proxy: Provide suport for IPA configuration filesLaurent Pinchart
IPA modules may require configuration files, which may be stored in different locations in the file system. To standardize file locations between all IPAs and pipeline handlers, provide a helper function to locate a configuration file by searching in the following directories: - All directories specified in the LIBCAMERA_IPA_CONFIG_PATH environment variable ; or - In the source tree if libcamera is not installed ; otherwise - In standard system locations (etc and share directories). When stored in the source tree, configuration files shall be located in a 'data' subdirectory of their respective IPA directory. More locations, or extensions to the mechanism, may be implemented later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28libcamera: ipa_proxy: Don't include <iostream>Laurent Pinchart
The iostream header isn't needed. Drop it. Fixes: c2a8217df54c ("libcamera: add IPA proxy") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28libcamera: ipa_proxy: Add missing space in info messageLaurent Pinchart
The message printed when loading a proxy worker from the build directory is missing a space. Add it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: utils: Add a function to retrieve the libcamera source treeLaurent Pinchart
Similarly to libcameraBuildPath(), there's a need to locate resources within the source tree when running libcamera without installing it. Support this use case with a new utils::libcameraSourcePath() function. The implementation uses a symlink from the build root to the source root in order to avoid hardcoding the path to the source root in the libcamera.so binary. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: Name IPA modules after their source directoryLaurent Pinchart
The IPAModuleInfo::name field is currently a free-formed string that has little use. Tighten its usage rules to make it suitable for building file system paths to IPA-specific resources by matching the directory name of the IPA module. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-27test: Use float values for brightness, contrast and saturationLaurent Pinchart
Two tests use the brightness, contrast and saturation controls with integer failures. They were not updated by commit eff4b1aa01c1 which turned those controls into floats. This doesn't cause test failures as the control API converts the value types. For correctness, update the tests to use float values. Fixes: eff4b1aa01c1 ("libcamera: controls: Reorder and update description of existing controls") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-27qcam: Don't crash if camera can't be openedLaurent Pinchart
If the camera specified on the command line can't be opened, the MainWindow constructor still proceeds to check the startStopAction_, which results in MainWindow::startCapture() being called and trying to use a null camera_ object. Fix this by returning from the constructor as soon as the error is detected. This also fixes a similar crash if the camera selection dialog box is closed without selecting a camera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com>
2020-04-27libcamera: controls: Add AWB related controlsNaushir Patuck
AwbMode is a new enum type to specify operating mode of the AWB algorithm. All modes may not be supported by all platforms. ColourGains is a new float array type used to specify manual red and blue (in that order) colour channel gains when AWB is disabled. ColourTemperature is a new control to return the current estimate of the colour temperature. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-04-27libcamera: controls: Add AE related controlsNaushir Patuck
AeMeteringMode, AeConstraintMode, and AeExposureMode are new enum type controls used to specify operating modes in the AE algorithm. All modes may not be supported by all platforms. ExposureValue is a new control used to set the log2 exposure adjustment for the AE algorithm. Lux is a new control that returns the current lux estimate. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-04-27libcamera: controls: Reorder and update description of existing controlsNaushir Patuck
Group AE, AWB, etc. controls together for accessibility. Update descriptions for Contrast, Brightness, and Saturation controls. Update the uvcvideo and vimc pipeline handlers to use the new brightness, contrast and saturation units. UVC has no explicit units for those controls, so map them with a best effort heuristic. For VIMC, hardcode the control range based on knowledge of the driver implementation for simplicity. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-04-27libcamera: controls: Updates to gain and exposure controlsNaushir Patuck
Rename: ManualExposure -> ExposureTime ManualGain -> AnalogueGain Use micro-seconds units for ExposureTime. This is changed from milli- seconds. The latter would not allow very low exposure times. AnalogueGain switch to use a float to allow fractional gain adjustments. Update the uvcvideo pipeline handler to use the new exposure and gain units. For ExposureTime, UVC uses units of 100 micro-seconds, so map the values before setting V4L2_CID_EXPOSURE_ABSOLUTE. For AnalogueGain, UVC has no explicit gain units, so map the default gain value to 1.0 and linearly scale to the requested value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-27libcamera: control_ids: Add comment to specify control directionNaushir Patuck
Document that controls are bi-directional by default. If a control is only returned in metadata, this must be specified in the control's description. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-27libcamera: pipeline: uvcvideo: Add support for AeEnableLaurent Pinchart
UVC devices support auto-exposure, expose the feature through the AeEnable control. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-04-27libcamera: pipeline: uvcvideo: Refactor control handlingLaurent Pinchart
Move addition and processing of individual controls to separate functions, to prepare for more complex mappings of control values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26cam: Add an option to list camera controlsLaurent Pinchart
Add a new --list-controls option to print information about all the controls supported by a camera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26cam: Rename OptProps to OptListPropertiesLaurent Pinchart
The name OptProps is not very clear, spell it out fully. The command line options are not changed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26libcamera: v4l2_videodevice: Add support for frame start eventsLaurent Pinchart
Extend the V4L2VideoDevice to support notifying of frame start events. The events are received from the device through the V4L2 event API, and passed to users of the class through a signal. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26libcamera: v4l2_device: Update documentationJacopo Mondi
Compound controls are now supported, but they're still listed as unsupported in some parts of the V4L2Device class documentation. Fix this by removing those parts. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26libcamera: geometry: Rename Rectangle fieldsJacopo Mondi
The Rectangle class members that represents the rectangle horizontal and vertical sizes are named 'w' and 'h', in contrast with the Size and SizeRange classes which use 'width' and 'height', resulting in having to look at class definition every time to know which names to use. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-26libcamera: v4l2_videodevice: Rename fdEvent_ to fdBufferNotifier_Laurent Pinchart
To prepare for the addition of a second notifier for V4L2 events, rename the current fdEvent_ member to fdBufferNotifier_ to better reflect its usage. While at it, simplify allocation of the fdEvent_ notifier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-20libcamera: device_enumerator_udev: Log the right number of missing depsLaurent Pinchart
Since commit e75ef59e028e ("libcamera: device_enumerator_udev: Update pending list in addUdevDevice") the populateMediaDevice() function returns 0 on success instead of the number of missing dependencies, resulting in a wrong number being logged. Fix it. Fixes: e75ef59e028e ("libcamera: device_enumerator_udev: Update pending list in addUdevDevice") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com>
2020-04-17libcamera: v4l2_videodevice: Return correct format for metadataLaurent Pinchart
When setting format on a metadata video device, the returned format isn't updated with the actual set format due to a typo. Fix it. Reported-by: Coverity CID=279098 Fixes: 629e9301c518 ("libcamera: v4l2_device: Add META support in g/s_fmt") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-16libcamera: gen-ipa-pub-key.py: Wrap lines in generated fileLaurent Pinchart
To make the output more readable, break the publicKeyData_ array at 8 bytes boundaries. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-16libcamera: Make IPA module signing mandatory for the meantimeLaurent Pinchart
IPA module signing is optional, but when not available due to missing dependencies, we hit failures due to a non fully implemented IPA isolation. Make module signing mandatory until isolation is functional. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-16libcamera: Document dependencies for IPA module signingLaurent Pinchart
Document the dependency on libgnutls28-dev and openssl for IPA module signing int he README.rst file. While at it, sort the entries alphabetically. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-16libcamera: Make IPA module signing optionalLaurent Pinchart
The IPA module signing mechanism relies on openssl to generate keys and sign the module. If openssl is not found on the system, the build will fail. Make the dependency optional by detecting openssl, and skip generation of signatures if openssl isn't found. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Add SPDX headers to Doxygen configurationLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Add SPDX headers to Gentoo ebuildLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Add SPDX headers to the git commit hook scriptsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Add SPDX headers to RST documentationLaurent Pinchart
The documentation files are licensed under CC-BY-SA-4.0, but this has never been specified explicitly. Add corresponding SPDX headers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Move developer's certificate of origin to Documentation/Laurent Pinchart
The developer's certificate of origin isn't a license, move it from LICENSES/ to Documentation/ by incorporating it in contributing.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Replace deprecated GPL-2.0 with GPL-2.0-onlyLaurent Pinchart
The GPL-2.0 SPDX identifier is deprecated, replace it with GPL-2.0-only. The files in include/linux/ are not touched as they're copied verbatim from the kernel sources. Rename the GPL-2.0.txt license file to GPL-2.0-only.txt, and add a GPL-2.0.txt symlink to support the include/linux/ headers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Remove unused LGPL-2.1Laurent Pinchart
No source is licensed under the LGPL-2.1, we only use LGPL-2.1-or-later. Remove the corresponding license file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Add missing licensesLaurent Pinchart
Add missing license texts for licenses used in the project. The license texts have been retrieved using 'reuse download' ([1]). [1] https://reuse.software/ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15licenses: Rename license files according to REUSELaurent Pinchart
The REUSE specification [1] defines a standardized method for declaring copyright and licensing information. Rename the licenses directory and the files it contains to comply with the specification. No license text is modified. [1] https://reuse.software/spec/ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-15test: list-camera: Handle error on starting the CameraManagerUmang Jain
Pointed out by Coverity DefectId=297074 Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>