summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-09libcamera: framebuffer_allocator: Remove unnecessary `clear()`Barnabás Pőcze
The vector in question is destroyed when the item in the `buffers_` map is destroyed as a result of the `erase()` call. A vector's destructor already does all the things that `clear()` does, so calling it earlier is not needed. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: mojom_libcamera_generator.py: Fix Python warningMilan Zamazal
Python 3.12 starts emitting the following warning when building libcamera: .../utils/ipc/generators/mojom_libcamera_generator.py:372: SyntaxWarning: invalid escape sequence '\.' if not re.match('^ipa\.[0-9A-Za-z_]+', namespace): `r' prefix is now required before the regexp. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: device_enumerator: ensure deviceNode is not emptyBenjamin Bara
When activating both ISP nodes on the i.MX8MP, but only connecting one camera sensor, libcamera aborts because it couldn't find the chosen entity's device node: [37:54:40.779902250] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media1: rkisp1 [37:54:40.780196750] [3631] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found [37:54:40.780237875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media0: rkisp1 [37:54:40.780505125] [3631] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1' [37:54:40.780599875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:312 Successful match for media device "rkisp1" [37:54:40.780731375] [3631] ERROR V4L2 v4l2_device.cpp:93 'rkisp1_isp': Failed to open V4L2 device '': No such file or directory Fix this by skipping empty device nodes: [37:49:05.172672000] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media1 found [37:49:05.172720625] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media1: rkisp1 [37:49:05.172973875] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found [37:49:05.173012125] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media0: rkisp1 [37:49:05.173281625] [3603] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1' [37:49:05.173376875] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:107 Skip rkisp1_isp: no device node [37:49:05.173414375] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:316 Successful match for media device "rkisp1" [37:49:05.173671250] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video1[15:cap]: Opened device platform:rkisp1: rkisp1: rkisp1_stats [37:49:05.173775125] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video2[16:out]: Opened device platform:rkisp1: rkisp1: rkisp1_params [37:49:05.173880500] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video0[18:cap]: Opened device platform:rkisp1: rkisp1: rkisp1 Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: Fix deserialization of multiple fd parametersPaul Elder
The IPADataSerializer::deserializer attempts to optimise code paths and remove potentially unused code where multiple File Descriptors were not expected to be utilised. The addition of multiple SharedFD entries in the IPC highlights this as a bug. Clean up the conditionals to ensure that all File Descriptors are correctly deserialized. Bug: https://bugs.libcamera.org/show_bug.cgi?id=205 Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09apps: lc-compliance: Fix source file ordering in meson.buildNícolas F. R. A. Prado
The capture_test.cpp file was added in the source list of meson in the wrong place. Fix it so the list is alphabetically sorted. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: Add OV64A40 tuning filesLee Jackson
Provide the OV64A40 tuning files for the Arducam Omnivision camera module to operate on the VC4 ISP architecture on Raspberry Pi 4 and below. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libipa: camera_sensor_helper: Add OV64A40 helperJacopo Mondi
Add a CameraSensorHelper for the OV64A40 camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Provide a Camera Helper for the OV64A40Jacopo Mondi
Support the OV64A40 sensor with a camera helper to manage the gain model, light sensitivity, and control delays. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: camera_sensor: Add OV64A40 sensor propertiesKieran Bingham
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel size of 1.008µ. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: vc4: Implement the StatsOutputEnable vendor controlNaushir Patuck
Implement the StatsOutputEnable control for the VC4 IPA. When set, this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput metadata control. To get this working, IpaBase::libcameraMetadata_ is moved from a private to a protected member variable. This makes it accessable to the VC4 derived IPA class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09build: controls: Add Raspberry Pi vendor specific controlsNaushir Patuck
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific vendor controls. Define a control StatsOutputEnable to allow the ISP hardware statistics to be output through metadata via the Bcm2835StatsOutput control. The implementation of these controls will follow in a subsequent patch. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: raspberrypi: ctt: Improve the Macbeth Chart search reliabilityDavid Plowman
Previously the code would brighten up images in case the Macbeth Chart is slightly dark, and also zoom in on sections of it to look for charts occupying less of the field of view. But it would not do both together. This change makes the search for smaller charts also repeat that search for the brightened up images that it made earlier, thereby increasing the chances of success for non-optimal tuning images. There are also a couple of very small drive-by typo fixes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: awb: Add an initialValues methodDavid Plowman
This allows the IPA to get reasonable default colour gains before AWB has run. This is particularly important on the PiSP platform where these numbers are helpful in programming the Front End statistics block in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: black_level: Add an initialValues methodDavid Plowman
This allows the IPA to discover the correct black level values even before any frames have been processed. This is important on the PiSP platform where the front end black level blocks must be programmed in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Allow the mean of an empty histogram intervalNick Hollinghurst
Don't assert when taking the weighted mean of a zero-width or zero-weight interval; return its upper bound. That is certainly correct in the zero-width case, and plausible otherwise. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09Documentation: camera-sensor-model: Support Sphinx < 2.0Laurent Pinchart
The language argument to the code-block directive was mandatory in Sphinx before 2.0. Fix the few instances where no language is specified to support older versions of Sphinx. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09gstreamer: Support for pre-1.16 GstEventLaurent Pinchart
The gst_clear_event() function used by libcamerasrc has been introduced in GStreamer 1.16, while libcamera claims to need 1.14 or newer. This causes a compilation error. Fix it by copying the gst_clear_event() implementation to gstlibcamera-utils.h when compiling with older GStreamer version. The version check makes it clear that the workaround is needed with older versions only, flagging it for removal when the minimum GStreamer version requirement will be bumped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09lc-compliance: Set minimum version for gtest dependencyLaurent Pinchart
lc-compliance depends on support for skipping tests in gtest (commit 00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum version for the gtest dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-05ipa: rpi: Add hardware line rate constraintsNaushir Patuck
Advertise hardware constraints on the pixel processing rate through the Controller::HardwareConfig structure. When calculating the minimum line length during a configure() operation, ensure that we don't exceed this constraint. If we do exceed the hardware constraints, increase the modes's minimum line length so the pixel processing rate falls below the hardware limit. If this is not possible, throw a loud error message in the logs. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-21pipeline: rpi: Respect provided strideWilliam Vinnicombe
When converting from StreamConfiguration to V4L2DeviceFormat, the stride was being dropped with the result that users could not request a custom stride. Set the stride in the V4L2DeviceFormat to prevent this happening. Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-21libcamera: camera: Fix unused variable compiler warningLaurent Pinchart
When compiling with gcc 8.4.0, the compiler was reported to throw an unused variable warning: ../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’: ../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable] for (auto [i, cfg] : utils::enumerate(config_)) { ^ The build environment may have been incorrect as the problem couldn't be reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is indeed unused. It turns out that the code can be simplified, as the commit that removed usage of the variable kept the now unneeded utils::enumerate() call. Simplify the code and fix the warning in one go. Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-08meson: Replace hack with usage of '@BASENAME@'Laurent Pinchart
Starting with meson 0.59, the custom_target() function substitutes '@BASENAME@' in the output parameter with the input file name, with the extension removed. This is exactly what we implement manually when generating the IPA interface .cpp files. Furthermore, starting with meson 0.60, the 'name' positional parameter to the custom_target() function is optional, and defaults to the basename of the output file (including the extension). This is exactly the name we compute manually and pass to the function. As libcamera requires meson 0.60 or newer, we can depend on those two features and drop manual computation of the base name. This fixes a warning with recent meson versions that complain that passing a file object to the format() function is a broken feature: WARNING: Broken features used: * 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'} Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07README.rst: Add missing libgtest-dev dependency for lc-complianceLaurent Pinchart
lc-compliance requires gtest. When not available on the system, we install it using a meson wrap, but it is still better to install the system package. Add it as a dependency in README.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: gstreamer: Remove videoconvert element from pipelineLaurent Pinchart
The GStreamer single stream test uses the following pipeline: libcamerasrc ! videoconvert ! fakesink The videoconvert element isn't useful as the data is thrown away by the fakesink anyway. We can shorten the pipeline to libcamerasrc ! fakesink to save CPU time and to avoid depending on the gstreamer1.0-plugins-base package to run the unit tests. The test could be further simplified by replacing gst_parse_bin_from_description_full() with gst_element_factory_make(), now that we only add one element to the bin. The extra cost incurred by the bin only impacts initialization time, and using a bin will make it easier to add other elements in the future if needed. Keep the bin, and only drop the videoconvert element. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: ipc: unixsocket: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Improve debugging on process exit failuresLaurent Pinchart
When the process fails to run and exit normally, the test prints an error message that provides little information: process did not exit normally Expand the error message to print the exit status to make debugging easier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Fix uninitialized variable on process exit failureLaurent Pinchart
If the process fails to exit before the timeout, the LogProcessTest::exitStatus_ variable gets used uninitialized. Fix it by initializating to Process::NotExited. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Log an error when failing due to incorrect messageLaurent Pinchart
One of the error paths in the test returns without logging a message, which makes failures difficult to debug. Fix it by adding an error message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07meson: Tag all installed filesLaurent Pinchart
Meson uses tags to sort installed files in categories, and makes it possible to install a subset of the files using the '--tags' argument to 'meson install'. This is typically used by distributions to split the runtime, development and documentation files into separate packages. By default, meson tries to guess the correct tag for installed files, but can't always do so properly. Mark the install targets that meson can't guess with the correct install_tag. As the feature has been introduced in meson 0.60, bump the minimum meson version. The latest LTS release of all major distributions that libcamera currently targets ship a recent enough meson version. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-12-07gstreamer: Implement renegotiationJaslo Ziska
This commit implements renegotiation of the camera configuration and source pad caps. A renegotiation can happen when a downstream element decides to change caps or the pipeline is dynamically changed. To handle a renegotiation the GST_FLOW_NOT_NEGOTIATED return value has to be handled in GstLibcameraSrcState::processRequest(). Otherwise the default would be to print an error and stop streaming. To archive this in a clean way the if statement is altered into a switch statement which now also has a case for GST_FLOW_NOT_NEGOTIATED. In the case of GST_FLOW_NOT_NEGOTIATED every source pad is checked for the reconfiguration flag with gst_pad_needs_reconfigure() which does not clear this flag. If at least one pad requested a reconfiguration the function returns without an error and the renegotiation will happen later in the running task. If no pad requested a reconfiguration then the function will return with an error. In gst_libcamera_src_task_run() the source pads are checked for the reconfigure flag by calling gst_pad_check_reconfigure() and if one pad returns true and the caps are not sufficient anymore then the negotiation is triggered. It is fine to trigger the negotiation after only a single pad returns true for gst_pad_check_reconfigure() because the reconfigure flags are cleared in the gst_libcamera_src_negotiate() function. If any pad requested a reconfiguration the following will happen: 1. The camera is stopped because changing the configuration may not happen while running. 2. The completedRequests queue will be cleared by calling GstLibcameraSrcState::clearRequests() because the completed buffers have the wrong configuration. 3. The new caps are negotiated by calling gst_libcamera_src_negotiate(). When the negotiation fails streaming will stop. 4. The camera is started again. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07gstreamer: Add GstLibcameraSrcState::clearRequests methodJaslo Ziska
Add a clearRequests() function to GstLibcameraSrcState which clears the GstLibcameraSrcState::completedRequests_ queue. Use this new function in gst_libcamera_src_task_leave() instead of doing it manually. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07gstreamer: Move negotiation logic to separate functionJaslo Ziska
Move the code which negotiates all the source pad caps into a separate function called gst_libcamera_src_negotiate(). When the negotiation fails this function will return false and true otherwise. Use this function instead of doing the negotiation manually in gst_libcamera_src_task_enter() and remove the now redundant error handling code accordingly. Signed-off-by: Jaslo Ziska <jaslo@ziska.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-06test: gstreamer: Fix indentation in commentsLaurent Pinchart
A couple of comments are mis-indented in the gstreamer unit test. Fix them, and reflow the text while at it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-06meson_options: Sort options alphabeticallyLaurent Pinchart
The pycamera option was added at the end of the file, breaking alphabetical order. Restore it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2023-12-04README.rst: Document dependencies for the Python bindingsLaurent Pinchart
The Python bindings require the libpython3-dev and pybind11-dev packages. Document it along the other dependencies in README.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-04README.rst: Drop indirect dependencies on Qt5 packagesLaurent Pinchart
The libqt5core5a, libqt5gui5 and libqt5widgets packages are dependencies of the qtbase5-dev package. There's no need to list them explicitly. While at it, sort the qcam dependencies alphabetically. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: cac: Minor code improvements and tidyingDavid Plowman
We make a few small improvements to the code: * The arrayToSet method is prevented from overwriting the end of the array if there are too many values in the input table. If you supply a table, it will force you to put the correct number of elements in it. * The arrayToSet and setStrength member functions are turned into static functions. (There may be a different public setStrength member function in future.) * When no tables at all are given, the configuration is flagged as being disabled, so that we can avoid copying tables full of zeroes around. As a consequence, the pipeline handler too will disable this hardware block rather than run it needlessly. (Note that the tuning tool will put in a completely empty "rpi.cac" block if no CAC tuning images are supplied, benefiting from this behaviour.) * The initialise member function is removed as it does nothing. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: agc: Fix bug where AeLocked was never getting setDavid Plowman
The recent change where time-filtering is done before sorting out the digital gain means that the target exposure without digital gain is no longer set, breaking the 'AeLocked' calculation. We can use the regular (full) target exposure instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain") Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30documentation: Document vendor specific controls and properties handlingNaushir Patuck
Add some documentation to the pipeline handler file describing how to implement and handle vendor specific controls and properties with a small example. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30libcamera: controls: Use vendor tags for draft controls and propertiesNaushir Patuck
Label draft controls and properties through the "draft" vendor tag and deprecate the existing "draft: true" mechanism. This uses the new vendor tags mechanism to place draft controls in the same libcamera::controls::draft namespace and provide a defined control id range for these controls. This requires moving all draft controls from control_ids.yaml to control_ids_draft.yaml. One breaking change in this commit is that draft control ids also move to the libcamera::controls::draft namespace from the existing libcamera::controls namespace. This is desirable to avoid API breakages when adding new libcamera controls. So, for example, the use of controls::NOISE_REDUCTION_MODE will need to be replaced with controls::draft::NOISE_REDUCTION_MODE. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29libcamera: control: Add vendor control id range reservationNaushir Patuck
Add a new control_ranges.yaml file that is used to reserve control id ranges/offsets for libcamera and vendor specific controls. This file is used by the gen-controls.py script to generate control id values for each control. Draft controls now have a separate range from core libcamera controls, breaking the existing numbering behaviour. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-11-29build: controls: Rework how controls and properties are generatedNaushir Patuck
Add support for using separate YAML files for controls and properties generation. The mapping of vendor/pipeline handler to control file is done through the controls_map variable in include/libcamera/meson.build. This simplifies management of vendor control definitions and avoids possible merge conflicts when changing the control_ids.yaml file for core and draft controls. With this change, libcamera and draft controls and properties files are designated the 'libcamera' vendor tag. In this change, we also rename control_ids.yaml -> control_ids_core.yaml and property_ids.yaml -> property_ids_core.yaml to designate these as core libcamera controls. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29controls: Update argument handling for controls generation scriptsNaushir Patuck
The template file to the gen-controls.py and gen-py-controls.py is now passed in through the '-t' or '--template' command line argument instead of being a positional argument. This will allow multiple input files to be provided to the scripts in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29controls: Add vendor control/property support to generation scriptsNaushir Patuck
Add support for vendor-specific controls and properties to libcamera. The controls/properties are defined by a "vendor" tag in the YAML control description file, for example: vendor: rpi controls: - MyExampleControl: type: string description: | Test for libcamera vendor-specific controls. This will now generate a control id in the libcamera::controls::rpi namespace, ensuring no id conflict between different vendors, core or draft libcamera controls. Similarly, a ControlIdMap control is generated in the libcamera::controls::rpi namespace. A #define LIBCAMERA_HAS_RPI_VENDOR_CONTROLS is also generated to allow applications to conditionally compile code if the specific vendor controls are present. For the python bindings, the control is available with libcamera.controls.rpi.MyExampleControl. The above controls example applies similarly to properties. Existing libcamera controls defined in control_ids.yaml are given the "libcamera" vendor tag. A new --mode flag is added to gen-controls.py to specify the mode of operation, either 'controls' or 'properties' to allow the code generator to correctly set the #define string. As a drive-by, sort and redefine the output command line argument in gen-controls.py and gen-py-controls.py to ('--output', '-o') for consistency. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-29libcamera: pipeline: Fix c++20 compile warningBrett Brotherton
Fix -Wdeprecated-this-capture error when building with c++20 by explicity naming this in the capture. Signed-off-by: Brett Brotherton <bbrotherton@google.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-11-28Documentation: Fix list indentationLaurent Pinchart
reStructuredText requires list items to be indented. Fix the few offenders in the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-28README.rst: Use code directive for all code examplesLaurent Pinchart
Most of the code examples in README.rst use the code directive, but some use literal blocks or just quoted paragraphs. Use the code directive for all code for consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: contributing: Integrate the code of conductLaurent Pinchart
Now that libcamera has an official code of conduct, mention it in the 'contributing' document with a clear indication that all community members are expected to follow the code of conduct. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-25Documentation: code-of-conduct: Add contact informationLaurent Pinchart
Replace the boilerplate "[INSERT EMAIL ADDRESS]" contact information with conduct@libcamera.org, and indicate that the people behind that e-mail address can also be contacted directly if needed. The direct contact information aims at offering more confidence to reporters than an anonymous mail alias in case they wish to report an issue with one of the core project members. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>