summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-23libcamera: v4l2_subdevice: Explain sort order of formatInfoMapKieran Bingham
The sort order used in the table isn't obvious. Reference the source of linux/media-bus-format.h at the top of the table for reference for future updates. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23libcamera: bayer_format: Add Y12 to bayerToFormatKieran Bingham
Support for Mono 12-bit formats were added to the mbusCodeToBayer table without supplying the corresponding entry for converting the other way. Add the relevant entry to the bayerToFormat table. Fixes: ec6309571654 ("libcamera: bayer_format: Add unpacked mono 12-bit format to the conversion table") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23libcamera: formats: Fix sort ordering of R10_CSI2PKieran Bingham
Move formats::R10_CSI2P to be grouped with the formats::R10 counterpart and keep the section of format declarations sorted in increasing bit depth. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23libcamera: formats: Add 16-bit mono formatNaushir Patuck
Add the relevant definitions for a 16-bit mono pixel and media-bus format. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23libcamera: Remove empty formats.cLaurent Pinchart
Commit e0a51061bc69 ("libcamera: formats: Add 14-bits Bayer RAW formats") added an empty formats.c file by mistake (and we failed to catch it during review). Delete it. Fixes: e0a51061bc69 ("libcamera: formats: Add 14-bits Bayer RAW formats") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23pipeline: rpi: Always initialize the embedded buffer in tryRunPipelineElias Naur
Vc4CameraData::findMatchBuffers() may return successfully with a null embedded buffer, in which case the embedded buffer id would be left uninitialized. Without this change, libcamera v0.2.0 usually crashes for me with an assertion error: ipa_base.cpp:397 assertion "it != buffers_.end()" failed in prepareIsp() Signed-off-by: Elias Naur <mail@eliasnaur.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-01-23test: gstreamer: Use env instead of registry editNicolas Dufresne
Instead of editing the registry, use gst_env variable provided by the plugin and already used as part of the devenv shell. This reduces the complexity of the C++ test code. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23gstreamer: Add meson devenv supportNicolas Dufresne
This change to the build system will prepend the plugin build directory to GST_PLUGIN_PATH environment. This makes the built plugin visible to GStreamer inside meson devenv enabling uninstalled testing. In order to avoid polluting the user registry, the GST_REGISTRY environment is also set. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-23utils: ipc: extract-docs: Fix escape characters in regexPaul Elder
Newer versions of python now generate a SyntaxWarning (SyntaxError in the future [1]) for invalid escape sequences. Fix this, as there were invalid escape sequences in the regexes: "libcamera/utils/ipc/./extract-docs.py:13: SyntaxWarning: invalid escape sequence '\/'" [1] https://docs.python.org/3.12/library/re.html Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-01-22Documentation: Update Qt documentation links to Qt 6Neal Gompa
The documentation is effectively the same, but we should be pointing to the actively supported and used Qt version. Signed-off-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-01-22libcamera: base: signal: Update Qt documentation link to Qt 6Neal Gompa
The documentation is effectively the same, but we should be pointing to the actively supported and used Qt version. Signed-off-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-01-17libcamera: v4l2_subdevice: Enable streams API when supportedLaurent Pinchart
The streams API needs to be enabled explictly by setting a subdev client capability. Do so unconditionally for subdevs that expose streams support. We don't need any kernel version check to use the VIDIOC_SUBDEV_S_CLIENT_CAP ioctl, as it is guaranteed to be supported by kernels that support streams. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-17include: linux: Update kernel headers to version v6.7Laurent Pinchart
Update kernel headers to v6.7 using utils/update-kernel-headers.sh and re-instating libcamera local modifications. The V4L2_SUBDEV_CAP_MPLEXED flag has been renamed to V4L2_SUBDEV_CAP_STREAMS in the upstream streams API. Adapt the code base accordingly. The flag's numerical value hasn't changed, there is no ABI breakage introduced by the API update. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-12libipa: camera_sensor_helper: Mark createInstance() with overrideLaurent Pinchart
The CameraSensorHelperFactory::createInstance() function overrides a virtual function from CameraSensorHelperFactoryBase. The function declaration doesn't mark it with the override keyword. This could cause issues in the future if the base class' function changes, as the compiler will not issue any warning in that case. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera v0.2.0Kieran Bingham
ABI Compliance: abi-compliance-checker reports 94.6% binary compatibilty and 97.6% source compatibility between 0.1.0 and 0.2.0. The SONAME has been updated accordingly and applications must be relinked against this version of libcamera. - Binary compatibility: 94.6% - Source compatibility: 97.6% - Total binary compatibility problems: 5, warnings: 2 - Total source compatibility problems: 3, warnings: 3 The key ABI/API differences here are: - AeFlicker The control "SceneFlicker" has been removed and replaced by AeFlickerMode, AeFlickerDetected and AeFlickerPeriod. - struct CameraConfiguration Field transform has been removed from the middle position of this structural type. Field orientation has been added at the middle position of this structural type. Field sensorConfig has been added at the middle position of this structural type. Size of this type has been changed from 40 bytes to 96 bytes. Bugs: The following bugs are resolved with this release: https://bugs.libcamera.org: - Bug 91 - libcamerasrc is missing EOS handling - Bug 199 - Install error on Ubuntu for Orange Pi 5 - Bug 205 - ipa_proxy_worker.cpp fails to compile if an interface function has two arguments of SharedFD type - Bug 206 - Fails to build with Python 3.12 https://github.com/raspberrypi/libcamera/issues: - Assertion '!this->empty()' failed in libcamera::utils::Duration - libcamera-tools 0.0.5-1 #64 Integration overview: core: - utils: checkstyle.py: Treat Malformed trailers as a CommitIssue - utils: checkstyle.py: Initialise staged trailers - utils: checkstyle.py: Derive Amendment from Commit - utils: checkstyle.py: Check trailers for Amendment commits - libcamera: controls: Add controls for AEC/AGC flicker avoidance - libcamera: yaml: Increase the YAML parser limit - utils: checkstyle.py: Extract title and trailers with one command - meson: Correctly locate libc++ - Documentation: theme: Fix compilation with Sphinx >= 7.0.0 - libcamera: Remove duplicated SortIncludes in `.clang-format` - libcamera: stream: Document stride will be 0 for compressed formats - README.rst: Drop recommendation to install meson using pip3 - meson: Don't set _FORTIFY_SOURCE for ChromeOS - meson: Simplify check for _FORTIFY_SOURCE - libcamera: formats: Fix typo in YV444 V4L2PixelFormat listing - Documentation: Introduce Camera Sensor Model - libcamera: camera: Introduce SensorConfiguration - libcamera: camera_sensor: Support SensorConfiguration - libcamera: converter: A few fixes to ConverterFactoryBase documentation - libcamera: converter: drop unnecessary #include directive - utils: update-kernel-headers: Support git worktrees - libcamera: camera_sensor: Cache rotationTransform_ - libcamera: camera: Introduce Orientation - Documentation: Add figures to document Orientation - libcamera: properties: Make 'Rotation' the mounting rotation - libcamera: transform: Add functions to convert Orientation - libcamera: transform: Invert operator*() operands - libcamera: transform: Add operations with Orientation - test: Add unit test for Transform and Orientation - libcamera: Use CameraConfiguration::orientation - libcamera: camera_sensor: Cache mounting orientation instead of transform - libcamera: transform: Fold transformToOrientation() in its only caller - libcamera: transform: Make the transformFromOrientation() function static - libcamera: controls: Add controls for HDR - libcamera: camera_sensor: Only access V4L_CID_HBLANK if existing - Documentation: Add code of conduct - Documentation: code-of-conduct: Convert to reStructuredText - Documentation: code-of-conduct: Add license information - Documentation: code-of-conduct: Add contact information - Documentation: contributing: Integrate the code of conduct - README.rst: Use code directive for all code examples - Documentation: Fix list indentation - controls: Add vendor control/property support to generation scripts - controls: Update argument handling for controls generation scripts - build: controls: Rework how controls and properties are generated - libcamera: control: Add vendor control id range reservation - libcamera: controls: Use vendor tags for draft controls and properties - documentation: Document vendor specific controls and properties handling - README.rst: Drop indirect dependencies on Qt5 packages - README.rst: Document dependencies for the Python bindings - meson_options: Sort options alphabetically - meson: Tag all installed files - test: log: log_process: Log an error when failing due to incorrect message - test: log: log_process: Fix uninitialized variable on process exit failure - test: log: log_process: Improve debugging on process exit failures - test: log: log_process: Increase process exit timeout - test: ipc: unixsocket: Increase process exit timeout - test: gstreamer: Remove videoconvert element from pipeline - README.rst: Add missing libgtest-dev dependency for lc-compliance - meson: Replace hack with usage of '@BASENAME@' - libcamera: camera: Fix unused variable compiler warning - Documentation: camera-sensor-model: Support Sphinx < 2.0 - libcamera: camera_sensor: Add OV64A40 sensor properties - utils: ipc: Fix deserialization of multiple fd parameters - libcamera: device_enumerator: ensure deviceNode is not empty - utils: ipc: mojom_libcamera_generator.py: Fix Python warning - libcamera: framebuffer_allocator: Remove unnecessary `clear()` - hooks: pre-push: Disable interpretation of escape sequences - libcamera: geometry: Correct doxygen reference to classes - utils: update-mojo.sh: Properly remove old sources - utils: update-mojo.sh: Exit immediately on error - utils: update-mojo.sh: Change to the libcamera source directory - utils: update-mojo.sh: Reject a dirty libcamera tree - utils: update-mojo.sh: Commit the mojo update - utils: ipc: generate.py: Add bindings directory to Python path - utils: ipc: generate.py: Disable attributes checker - utils: ipc: Update mojo pipeline: - libcamera: rpi: pipeline_base: Remove populateSensorFormats() - libcamera: rpi: pipeline_base: Move findBestFormat to CameraData - libcamera: rpi: pipeline_base: Cache sensor format - pipeline: rpi: Don't call toV4L2DeviceFormat() from validate() - pipeline: rpi: Increase buffer import count to 32 - pipeline: rpi: Remove additional external dma buf handling logic - pipeline: rpi: Rename RPi::Stream::setExternalBuffer() - pipeline: rpi: Simplify buffer id generation - pipeline: rpi: Reset the frame lengths queue during configure - libcamera: rpi: Handle SensorConfiguration - libcamera: rpi: Allow platformValidate() to adjust format strides - libcamera: rpi: Fix wrong comment indentation - libcamera: rpi: Make isRaw/isYuv/isRgb static functions - libcamera: rpi: Cache rawStreams and outStreams - libcamera: rpi: Add some helpers to PipelineHandlerBase - libcamera: rpi: Simplify validate() and configure() for RAW streams - libcamera: rpi: Change default stream formats - libcamera: rpi: Simplify validate() and configure() for YUV/RGB streams - pipeline: rpi: Add RequiresMmap flag to RPi::Stream - pipeline: rpi: Add Recurrent and Needs32bitConv flags to RPi::Stream - pipeline: rpi: Add SharedMemObject class - pipeline: rpi: Add SW downscale status to RPi::Stream - pipeline: rpi: Move flip handling validation code - pipeline: rpi: Make color space members in RPiCameraConfiguration public - pipeline: rpi: vc4: Allocate more embedded data buffers - pipeline: rpi: Remove unused variable - pipeline: rpi: vc4: Fix drop frame bug when no ISP streams are configured - pipeline: rpi: Add some useful logging messages - libcamera: pipeline: Fix c++20 compile warning - pipeline: rpi: Respect provided stride ipa: - ipa: rpi: common: Handle AEC/AGC flicker controls - utils: raspberrypi: ctt: Improved color matrix fitting - ipa: rpi: vc4: data: Updated color matrices for RPi Cameras - utils: raspberrypi: ctt: Code tidying - ipa: rpi: Fix the reporting of Focus FoMs - ipa: rpi: imx290: Hide one frame on startup - ipa: rpi: agc: Fetch AWB status in process method, not prepare - ipa: rpi: agc: Filter exposures before dealing with digital gain - ipa: rpi: agc: Split AgcStatus into AgcStatus and AgcPrepareStatus - ipa: rpi: vc4: Make the StatisticsPtr construction clearer - ipa: rpi: histogram: Add interBinMean() - ipa: rpi: agc: Reorganise code for multi-channel AGC - ipa: rpi: agc: Implementation of multi-channel AGC - ipa: rpi: agc: Add AgcChannelConstraint class - ipa: rpi: agc: Use channel constraints in the AGC algorithm - ipa: rpi: Fix segfault when parsing invalid json file - ipa: rpi: Fix frame count logic when running algorithms - ipa: rpi: Avoid skipping IPAs on the first frame after the drop frames - ipa: rpi: Add IpaBase::platformStart() member function - mojom: pipeline: ipa: rpi: Add fields for PiSP objects - ipa: rpi: Add try_lock() to RPiController::Metadata - ipa: rpi: Add statsInline to the Controller hardware description - ipa: rpi: Add PiSP definitions to the Controller hardware description - ipa: rpi: Prepare ALSC for PiSP support - ipa: rpi: Prepare AWB for PiSP support - ipa: rpi: Add new algorithms for PiSP - build: ipa: Fix bug in building multiple IPA interfaces with the same mojom file - ipa: rpi: agc: Add an AGC stable region - ipa: rpi: contrast: Allow adaptive contrast enhancement to be disabled - ipa: rpi: denoise: Support different denoise configurations - ipa: rpi: agc: Avoid overwriting caller's statistics pointer - ipa: rpi: agc: When AGC channels are changed, start with the 1st channel - ipa: rpi: hdr: Add the ability to alter the LSC table - ipa: rpi: alsc: Do not re-read the alsc.status metadata - ipa: rpi: agc: Allow AGC channels to avoid using "fast desaturation" - ipa: rpi: vc4: Move denoise control handling into the VC4 derived IPA - ipa: rpi: agc: Fetch AWB status in the prepare method - ipa: rpi: agc: Make AGC controls affect all channels - ipa: rpi: alsc: Do not allow zero colour ratio statistics - ipa: rpi: agc: Fix bug where AeLocked was never getting set - ipa: rpi: cac: Minor code improvements and tidying - ipa: rpi: Add hardware line rate constraints - ipa: rpi: Allow the mean of an empty histogram interval - ipa: rpi: black_level: Add an initialValues method - ipa: rpi: awb: Add an initialValues method - utils: raspberrypi: ctt: Improve the Macbeth Chart search reliability - build: controls: Add Raspberry Pi vendor specific controls - ipa: vc4: Implement the StatsOutputEnable vendor control - ipa: rpi: Provide a Camera Helper for the OV64A40 - libipa: camera_sensor_helper: Add OV64A40 helper - ipa: rpi: vc4: Add OV64A40 tuning files - ipa: rpi: Implement HDR control - ipa: rpi: vc4: data: Update tuning files for HDR apps: - android: camera_device: Fix requestedStream handling - py: Add the SensorConfiguration class - py: gen-py-controls: Remove SceneFlicker workaround - apps: qcam: Add support for RGB565 - py: libcamera: Define and use Orientation - apps: cam: Add option to set stream orientation - py: cam: Add option to set stream orientation - gstreamer: Implement element EOS handling - gstreamer: Fix unused variable error - test: gstreamer: Fix indentation in comments - gstreamer: Move negotiation logic to separate function - gstreamer: Add GstLibcameraSrcState::clearRequests method - gstreamer: Implement renegotiation - lc-compliance: Set minimum version for gtest dependency - gstreamer: Support for pre-1.16 GstEvent - apps: lc-compliance: Fix source file ordering in meson.build Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: Update mojoLaurent Pinchart
Update mojo from commit 9be4263648d7d1a04bb78be75df53f56449a5e3a "Updating trunk VERSION from 6225.0 to 6226.0" from the Chromium repository. The update-mojo.sh script was used for this update. Bug: https://bugs.libcamera.org/show_bug.cgi?id=206 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: generate.py: Disable attributes checkerLaurent Pinchart
The attributes checker ensures that .mojom files don't contain unknown attributes. These check fail with the custom 'skipSerdes' and 'async' libcamera attributes. Ideally the list of supported attributes should be extended, but that can't easily be done without modifying the mojo sources that we try to keep identical to the upstream version to make updates easier. Disable the attributes checker completely for now to fix this issue. While at it, fix an indentation issue reported by checkstyle.py. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: generate.py: Add bindings directory to Python pathLaurent Pinchart
Newer mojo versions import a 'checks' module located in the bindings directory. In preparation for a mojo update, add the directory to the Python path make the import work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: update-mojo.sh: Commit the mojo updateLaurent Pinchart
Commit the mojo update with a standardized commit message. As mojo is imported as-is without local modifications, this simplifies usage of the update script. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: update-mojo.sh: Reject a dirty libcamera treeLaurent Pinchart
If the libcamera tree is dirty committing the result of the mojo update will be messy. Bail out in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: update-mojo.sh: Change to the libcamera source directoryLaurent Pinchart
Instead of prefixing all paths to IPC files with ${ipc_dir}, change to the libcamera sources root directory and use relative file paths. This simplifies the update script. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: update-mojo.sh: Exit immediately on errorLaurent Pinchart
If an error occurs there's no point in ignoring it silently and continuing. Exit immediately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: update-mojo.sh: Properly remove old sourcesLaurent Pinchart
The update-mojo.sh script starts by removing all sources before copying the new files from chromium. A bug in the 'rm' command makes the removal a no-op: the glob pattern is quoted, which attempts to remove a file name '*' in the tools directory, not all files in the directory. Fix it by removing the whole utils/ipc/mojo/ directory. While at it, also remove the utils/ipc/tools/ directory that contains imported sources. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: geometry: Correct doxygen reference to classesDaniel Scally
The classes Rectangle, Size and SizeRange are referenced with \struct in the doxygen comments in geometry.cpp. Correct the reference to \class to better reflect their definition. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09hooks: pre-push: Disable interpretation of escape sequencesKieran Bingham
The pre-push hook validates the commit messages utilising 'echo' to send the captured data from the git commit through grep. Commit messages may occasionally contain strings that could appear to be escape sequences such as doxygen style references to \struct. The '\' 'c' escape sequence can be interpreted to supress all further output [0] which then breaks the processing and string matching. Unfortunatley for us, doxygen's class reference constructed in the same form as \struct can be interpreted as the escape sequence to supress further output. [0] https://www.gnu.org/software/bash/manual/bash.html#Bash-Builtins Update the pre-push hook to explicitly disable escape sequence interpretation using the '-E' flag. This is not available on the posix-compliant shell 'dash', so also switch to bash explicitly to prevent potential failures. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: data: Update tuning files for HDRDavid Plowman
All the Raspberry Pi official camera tuning files are updated for HDR. As stated previously, there is no mechanism in the hardware for combining images so all this does is enable multi-channel AGC to produce short and long exposure frames. It will be up to the application to deal with them. The changes are identical in every tuning file. 1. The existing AGC tuning is duplicated twice so that we have 3 AGC channels. 2. The first is left alone (the default AGC channel), the second is tweaked to under-expose significantly (ev -3) and the final one is tweaked to over-exposure slightly (ev +0.5) 3. Control parameters are provided to the "rpi.hdr" algorithm to associate these AGC channels correctly with the HDR modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Implement HDR controlDavid Plowman
Sufficient plumbing is added so that the HDR mode control can be used to engage HDR modes on platforms that support them. On the vc4 platform, this allows multi-channel AGC to run, though there is no image merging. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: framebuffer_allocator: Remove unnecessary `clear()`Barnabás Pőcze
The vector in question is destroyed when the item in the `buffers_` map is destroyed as a result of the `erase()` call. A vector's destructor already does all the things that `clear()` does, so calling it earlier is not needed. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: mojom_libcamera_generator.py: Fix Python warningMilan Zamazal
Python 3.12 starts emitting the following warning when building libcamera: .../utils/ipc/generators/mojom_libcamera_generator.py:372: SyntaxWarning: invalid escape sequence '\.' if not re.match('^ipa\.[0-9A-Za-z_]+', namespace): `r' prefix is now required before the regexp. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: device_enumerator: ensure deviceNode is not emptyBenjamin Bara
When activating both ISP nodes on the i.MX8MP, but only connecting one camera sensor, libcamera aborts because it couldn't find the chosen entity's device node: [37:54:40.779902250] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media1: rkisp1 [37:54:40.780196750] [3631] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found [37:54:40.780237875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media0: rkisp1 [37:54:40.780505125] [3631] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1' [37:54:40.780599875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:312 Successful match for media device "rkisp1" [37:54:40.780731375] [3631] ERROR V4L2 v4l2_device.cpp:93 'rkisp1_isp': Failed to open V4L2 device '': No such file or directory Fix this by skipping empty device nodes: [37:49:05.172672000] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media1 found [37:49:05.172720625] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media1: rkisp1 [37:49:05.172973875] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found [37:49:05.173012125] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media0: rkisp1 [37:49:05.173281625] [3603] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1' [37:49:05.173376875] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:107 Skip rkisp1_isp: no device node [37:49:05.173414375] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:316 Successful match for media device "rkisp1" [37:49:05.173671250] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video1[15:cap]: Opened device platform:rkisp1: rkisp1: rkisp1_stats [37:49:05.173775125] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video2[16:out]: Opened device platform:rkisp1: rkisp1: rkisp1_params [37:49:05.173880500] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video0[18:cap]: Opened device platform:rkisp1: rkisp1: rkisp1 Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: ipc: Fix deserialization of multiple fd parametersPaul Elder
The IPADataSerializer::deserializer attempts to optimise code paths and remove potentially unused code where multiple File Descriptors were not expected to be utilised. The addition of multiple SharedFD entries in the IPC highlights this as a bug. Clean up the conditionals to ensure that all File Descriptors are correctly deserialized. Bug: https://bugs.libcamera.org/show_bug.cgi?id=205 Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09apps: lc-compliance: Fix source file ordering in meson.buildNícolas F. R. A. Prado
The capture_test.cpp file was added in the source list of meson in the wrong place. Fix it so the list is alphabetically sorted. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: Add OV64A40 tuning filesLee Jackson
Provide the OV64A40 tuning files for the Arducam Omnivision camera module to operate on the VC4 ISP architecture on Raspberry Pi 4 and below. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libipa: camera_sensor_helper: Add OV64A40 helperJacopo Mondi
Add a CameraSensorHelper for the OV64A40 camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Provide a Camera Helper for the OV64A40Jacopo Mondi
Support the OV64A40 sensor with a camera helper to manage the gain model, light sensitivity, and control delays. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libcamera: camera_sensor: Add OV64A40 sensor propertiesKieran Bingham
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel size of 1.008µ. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: vc4: Implement the StatsOutputEnable vendor controlNaushir Patuck
Implement the StatsOutputEnable control for the VC4 IPA. When set, this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput metadata control. To get this working, IpaBase::libcameraMetadata_ is moved from a private to a protected member variable. This makes it accessable to the VC4 derived IPA class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09build: controls: Add Raspberry Pi vendor specific controlsNaushir Patuck
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific vendor controls. Define a control StatsOutputEnable to allow the ISP hardware statistics to be output through metadata via the Bcm2835StatsOutput control. The implementation of these controls will follow in a subsequent patch. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09utils: raspberrypi: ctt: Improve the Macbeth Chart search reliabilityDavid Plowman
Previously the code would brighten up images in case the Macbeth Chart is slightly dark, and also zoom in on sections of it to look for charts occupying less of the field of view. But it would not do both together. This change makes the search for smaller charts also repeat that search for the brightened up images that it made earlier, thereby increasing the chances of success for non-optimal tuning images. There are also a couple of very small drive-by typo fixes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: awb: Add an initialValues methodDavid Plowman
This allows the IPA to get reasonable default colour gains before AWB has run. This is particularly important on the PiSP platform where these numbers are helpful in programming the Front End statistics block in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: black_level: Add an initialValues methodDavid Plowman
This allows the IPA to discover the correct black level values even before any frames have been processed. This is important on the PiSP platform where the front end black level blocks must be programmed in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Allow the mean of an empty histogram intervalNick Hollinghurst
Don't assert when taking the weighted mean of a zero-width or zero-weight interval; return its upper bound. That is certainly correct in the zero-width case, and plausible otherwise. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09Documentation: camera-sensor-model: Support Sphinx < 2.0Laurent Pinchart
The language argument to the code-block directive was mandatory in Sphinx before 2.0. Fix the few instances where no language is specified to support older versions of Sphinx. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09gstreamer: Support for pre-1.16 GstEventLaurent Pinchart
The gst_clear_event() function used by libcamerasrc has been introduced in GStreamer 1.16, while libcamera claims to need 1.14 or newer. This causes a compilation error. Fix it by copying the gst_clear_event() implementation to gstlibcamera-utils.h when compiling with older GStreamer version. The version check makes it clear that the workaround is needed with older versions only, flagging it for removal when the minimum GStreamer version requirement will be bumped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09lc-compliance: Set minimum version for gtest dependencyLaurent Pinchart
lc-compliance depends on support for skipping tests in gtest (commit 00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum version for the gtest dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-05ipa: rpi: Add hardware line rate constraintsNaushir Patuck
Advertise hardware constraints on the pixel processing rate through the Controller::HardwareConfig structure. When calculating the minimum line length during a configure() operation, ensure that we don't exceed this constraint. If we do exceed the hardware constraints, increase the modes's minimum line length so the pixel processing rate falls below the hardware limit. If this is not possible, throw a loud error message in the logs. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-21pipeline: rpi: Respect provided strideWilliam Vinnicombe
When converting from StreamConfiguration to V4L2DeviceFormat, the stride was being dropped with the result that users could not request a custom stride. Set the stride in the V4L2DeviceFormat to prevent this happening. Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-21libcamera: camera: Fix unused variable compiler warningLaurent Pinchart
When compiling with gcc 8.4.0, the compiler was reported to throw an unused variable warning: ../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’: ../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable] for (auto [i, cfg] : utils::enumerate(config_)) { ^ The build environment may have been incorrect as the problem couldn't be reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is indeed unused. It turns out that the code can be simplified, as the commit that removed usage of the variable kept the now unneeded utils::enumerate() call. Simplify the code and fix the warning in one go. Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-08meson: Replace hack with usage of '@BASENAME@'Laurent Pinchart
Starting with meson 0.59, the custom_target() function substitutes '@BASENAME@' in the output parameter with the input file name, with the extension removed. This is exactly what we implement manually when generating the IPA interface .cpp files. Furthermore, starting with meson 0.60, the 'name' positional parameter to the custom_target() function is optional, and defaults to the basename of the output file (including the extension). This is exactly the name we compute manually and pass to the function. As libcamera requires meson 0.60 or newer, we can depend on those two features and drop manual computation of the base name. This fixes a warning with recent meson versions that complain that passing a file object to the format() function is a broken feature: WARNING: Broken features used: * 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'} Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07README.rst: Add missing libgtest-dev dependency for lc-complianceLaurent Pinchart
lc-compliance requires gtest. When not available on the system, we install it using a meson wrap, but it is still better to install the system package. Add it as a dependency in README.rst. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>