| Age | Commit message (Collapse) | Author |
|---|
|
Add a write method to the JSONPrettyPrinter class to output a character.
This will be used to handle state updates when outputting individual
characters.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Skip all white space characters, not just ' '. This makes a difference
if the input JSON data is already formatted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
The standalone test mode output to a file name "pretty.json". To make
the test mode more versatile, output to stdout instead. The user can
then decide how to use the output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Instead of passing the output file to every method of the printer class,
make it a class member.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Instead of passing a state dictionary to every method, turn the printer
into a class and store the state internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
The ctt_pretty_print_json.py file supports being run standalone to test
the code. It however suffers from multiple issues:
- The same input file name is hardcoded, and doesn't exist in the
repository
- The input file name is used instead of JSON data
Fix both issues and make the input file selectable on the command line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
W605 invalid escape sequence '\.'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E302 expected 2 blank lines, found 0
Note that issues are still flagged, due to the use of docstrings as
multi-lines comments. This will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E305 expected 2 blank lines after class or function definition
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E741 ambiguous variable name 'l'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
W504 line break after binary operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E722 do not use bare 'except'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E721 do not compare types, use 'isinstance()'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E713 test for membership should be 'not in'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E116 unexpected indentation (comment)
E117 over-indented (comment)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E123 closing bracket does not match indentation of opening bracket's line
E126 continuation line over-indented for hanging indent
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E711 comparison to None should be 'if cond is None:'
E711 comparison to None should be 'if cond is not None:'
E712 comparison to False should be 'if cond is False:' or 'if not cond:'
E712 comparison to True should be 'if cond is True:' or 'if cond:'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E222 multiple spaces after operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E261 at least two spaces before inline comment
E262 inline comment should start with '# '
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E303 too many blank lines
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E701 multiple statements on one line (colon)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E228 missing whitespace around modulo operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E225 missing whitespace around operator
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E128 continuation line under-indented for visual indent
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E251 unexpected spaces around keyword / parameter equals
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E211 whitespace before '['
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E241 multiple spaces after ':'
E241 multiple spaces after ','
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E203 whitespace before ':'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E201 whitespace after '('
E201 whitespace after '{'
E201 whitespace after '['
E202 whitespace before '}'
E202 whitespace before ']'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
E231 missing whitespace after ','
E231 missing whitespace after ':'
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
Initial implementation of the Raspberry Pi (BCM2835) Camera Tuning Tool.
All code is licensed under the BSD-2-Clause terms.
Copyright (c) 2019-2020 Raspberry Pi Trading Ltd.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Improve the pre-push git hook script to reject commits without at least
one Reviewed-by line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Improve the pre-push git hook script to reject commits without the
committer's Signed-off-by line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a pre-push commit hooks to prevent unintentional push of patches
containing local changelogs to the master branch.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Link between resizer and capture is immutable and doesn't need to be
enabled.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Hook the utility 'shellcheck' into our checkstyle helper to
automatically verify shell script additions.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
rkisp1 kernel driver was merged upstream with minor changes in the
topology from the original driver libcamera based it's first support to
rkisp1.
Adapt libcamera capture script to work with upstream driver.
* Remove subdevice dphy from the pipeline.
* Add resizer in the pipeline.
* Fix links.
* Update entity names.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
This adds support for pre-commit hook workflow. In pre-commit hook we
check the style on the changes currently staged or the combination
of the index and the last commit if "git commit --amend" is being used.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This introduces a new argument "--amend" and a new special type of
commit "Amendment". It will check the style of changes that are in
the index combined with the changes of the last commit. So this is
the changes that would be applied by "git commit --amend" hence the
name of the argument.
This is needed to implement pre-commit hook.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This introduces a new command line "--staged" and a new special type of
commit "StagedChanges". It will check the style of changes that are in
the index, so the changes that would be committed by "git commit".
"--staged" was chosen to match with "git diff --staged" command line.
Other valid name could have been "--index" or "--cached". This was
my personal preference, aliases can be added later. Note that we must
not confuse this with working tree changes, as these changes are not
picked by "git commit".
This feature is needed to implement pre-commit hook.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This introduces a Commit class used in the final revlist list. All the
git commands are moved into that class. This class will be used to
introduce new types of commit (StagedChanges and Amendment) needed to implement
pre-commit hook support.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Makes the tool return 1 if there is any potential issues. This is
needed when using this tool for pre-commit hook in order to abort
the commit process.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The tool has been renamed in 2016 to make it more obvious what it
is doing. There is no other changes needed on our side.
See https://github.com/PyCQA/pycodestyle/issues/466
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The checkstyle script expects hunks to be declared with a start line and
line count, however the unified diff format [0] declares that a single
line hunk will only have the start line:
> If a hunk contains just one line, only its start line number appears.
> Otherwise its line numbers look like ‘start,count’. An empty hunk is
> considered to start at the line that follows the hunk.
[0] https://www.gnu.org/software/diffutils/manual/html_node/Detailed-Unified.html#Detailed-Unified
Attempting to parse a single line hunk results in the following error:
File "./utils/checkstyle.py", line 110, in __init__
raise RuntimeError("Malformed diff hunk header '%s'" % line)
RuntimeError: Malformed diff hunk header '@@ -1 +1,2 @@
The DiffHunk class only makes use of the start line, and does not
utilise the line count, thus update the regex to make the unused
groups optional.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The checkstyle.py patch has a fault which it identified in itself when
updating the regex string.
--- utils/checkstyle.py
+++ utils/checkstyle.py
#105: : W605 invalid escape sequence '\+'
+ diff_header_regex = re.compile('@@ -([0-9]+)(,[0-9]+)? \+([0-9]+)(,?[0-9]+)? @@')
---
1 potential style issue detected, please review
This is documented further at:
https://www.flake8rules.com/rules/W605.html
Update the string literal prefix to declare a raw byte string for the
regex parser.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an include checker to verify usage of the C compatibility headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit b817bcec6b53 ("libcamera: Auto generate version information")
causes the build to fail in the Chromium OS build environment, because
git update-index tries to take a lock (ie. write) in the git repo that
is outside of the build directory.
The solution is to simply skip git update-index if we are building in
the Chromium OS build environment, and this decision is made if the
build directory is not a subdirectory of the source directory.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
