| Age | Commit message (Collapse) | Author |
|---|
|
Provide a 10-bit bayer packing utility for the unpacked data produced
by ipu3-unpack.
Usage: ipu3-unpack input-file output-file
The output-file can be "-" to pack the data to stdout.
The output file generated by ipu3-pack can be directly fed to IMGU
for streaming.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The media graph may include a CSI-2 receiver entity between the sensor
and the ISP for platforms that have a CSI-2 receiver external to the
ISP. Support this by configuring the pipeline accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The regexp to convert the raw pixel media bus code to a pixel format is
incorrect. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
With sensors supporting crop, the regexp used to parse the media-ctl
output isn't correct as the pad configuration may span multiple lines
and contain other parameters. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Delete frames previously captured before starting a new capture, to
avoid mixing old and new frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The load_image function would throw errors with JPEG or JPG files containing
no raw data.
Prevent throwing these errors by returning 0 if an error has occurred.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If issue.line is None, the the terminal color is never reset back to
normal. This causes the yellow color to bleed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera uses the "..." include style for internal headers. Enforce it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IncludeOrderFormatter will be extended with more formatting rules
that should be applied before clang-format gets run, as it will
influence its output.
Add a priority mechanism for formatters, and give a negative priority to
the CLangFormatter to make it run last.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pre-push git hook script catches commits without a SoB line
corresponding to the committer, but doesn't perform the same check on
the author. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It's to fix build errors with mojom in ChromeOS chroot. The reason is that
ChromeOS recently moves native mojom generators module into site-packages,
which has higher import precedence than the local namespace package and shadows
the local package of the same. Add __init__.py to make it an explicit package
to avoid shadowing.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul ELder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The intel-ipu3.h header has moved in the v5.14 kernel. Update the kernel
headers update script accordingly.
While at it, add a missing directory separator to fix a failure when the
path to the kernel tree doesn't end with a /.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The gen-tp-header script does not have execute permissions set on the
file.
Add the execute permission to ensure that meson runs this script
consistently in the same configuration as other scripts, without
invoking python itself separately.
Signed-off-by: Brian Olson <icic@bolson.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
IPCUnixSocket::create() creates two file descriptors. One of
them is stored in IPCUnixSocket and the other is returned to a
caller. This clarifies the ownership using UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
When distributions build and package libcamera libraries, they may not
necessarily run the build in the upstream source tree. In these cases, the git
SHA1 versioning information will be lost.
This change addresses that problem by requiring package managers to run
'meson dist' to create a tarball of the source files and build from there.
On runing 'meson dist', the utils/run-dist.sh script will create a
.tarball-version file in the release tarball with the version string generated
from the existing utils/gen-version.sh script.
The utils/gen-version.sh script has been updated to check for the presence of
this .tarball-version file and read the version string from it instead of
creating one.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The gen-version.sh script expects to be called from a git repo, and sets its
src_root variable accordingly. This may not always be the case if it is built
from a tarball source - full support for which is in a future commit.
The MESON_SOURCE_ROOT environnement variable does not get set when called from
the meson vcs_tag() function, but does when called from the run_command()
function, so that cannot be used either.
Instead, explicitly pass the meson source root to the gen-version.sh script.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Branches named integration/* are candidates for merge in the master
branch. Subject them to the same checks in the pre-push git hook.
An important difference between integration branches and the master
branch is that the former are typically created as new branches. We
can't check the whole history as there are known bad commits, so we have
to identify the base commit for the integration branch. The best
approximation is to use the remote master branch for the tree being
pushed to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Two independent instances of the ControlSerializer class are in use at
the IPC boundaries, one in the Proxy class that serializes data from the
pipeline handler to the IPA, and one in the ProxyWorker which serializes
data in the opposite direction.
Each instance operates autonomously, without any centralized point of
control, and each one assigns a numerical handle to each ControlInfoMap
it serializes. This creates a risk of potential collision on the handle
values, as both instances will use the same numerical space and
are not aware of what handles has been already used by the instance "on
the other side".
To fix that, partition the handles numerical space by initializing the
control serializer with a seed according to the role of the component
that creates the serializer and increment the handle number by 2, to
avoid any collision risk.
While this is temporary and rather hacky solution, it solves an issue
with isolated IPA modules without too much complexity added.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When running the IPA in isolated mode, each side of the IPC boundary
has an instance of the ControlSerializer class which is used to
serializer/deserialize controls before transmitting them on the wire.
The IPAProxyWorker, which creates and manages the process the IPA runs in,
does not reset its ControlSerializer upon an IPA::configure() call, while
the IPAProxy does, effectively creating a misalignment between the
two sides of the fence.
This obviously creates issues as one side of the IPC runs with a
populated and possibly stale cache of ControlInfoMap references, while the
other side gets reset every time a new configuration is applied to the
Camera.
Fix that by resetting the IPAProxyWorker ControlSerializer on an
IPA configure() call.
This change fixes an issue which is easily triggered by running two
consecutive capture sessions with the IPA running in isolated mode:
ERROR Serializer control_serializer.cpp:520 Can't deserialize ControlList: unknown ControlInfoMap
Fixes: 7832e19a599e ("utils: ipc: add templates for code generation for IPC mechanism")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The indentation of the deserialization call on the proxy worker side
inside the case statement was one level too shallow. Fix it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Many signals used in internal and public APIs carry the emitter pointer
as a signal argument. This was done to allow slots connected to multiple
signal instances to differentiate between emitters. While starting from
a good intention of facilitating the implementation of slots, it turned
out to be a bad API design as the signal isn't meant to know what it
will be connected to, and thus shouldn't carry parameters that are
solely meant to support a use case specific to the connected slot.
These pointers turn out to be unused in all slots but one. In the only
case where it is needed, it can be obtained by wrapping the slot in a
lambda function when connecting the signal. Do so, and drop the emitter
pointer from all signals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
In many cases, the emitter object passed as a pointer from signals to
slots is also available as a class member. Use the class member when
this occurs, to prepare for removal of the emitter object pointer from
signals.
In test/event.cpp, this additionally requires moving the EventNotifier
to a class member.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
checkstyle.py uses single-quoted strings in most locations already.
There are a few locations where this wouldn't be convenient (when the
string itself contains a single quote, which would then require
escaping), but there are also a few other locations where double quotes
are used when single quotes would work fine. Change those to standardize
on single-quoted strings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Regarding (de)serialization in isolated IPA calls, we have four layers:
- struct
- byte vector + fd vector
- IPCMessage
- IPC payload
The proxy handles the upper three layers (with help from the
IPADataSerializer), and passes an IPCMessage to the IPC mechanism
(implemented as an IPCPipe), which sends an IPC payload to its worker
counterpart.
When a FileDescriptor is involved, previously it was only a
FileDescriptor in the first layer; in the lower three it was an int. To
reduce the risk of potential fd leaks in the future, keep the
FileDescriptor as-is throughout the upper three layers. Only the IPC
mechanism will deal with ints, if it so wishes, when it does the actual
IPC. IPCPipeUnixSocket does deal with ints for sending fds, so the
conversion between IPCMessage and IPCUnixSocket::Payload converts
between FileDescriptor and int.
Additionally, change the data portion of the serialized form of
FileDescriptor to a 32-bit unsigned integer, for alightnment purposes
and in preparation for conversion to an index into the fd array.
Also update the deserializer of FrameBuffer::Plane accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The IPCUnixSocket::send() function may fail, in which case it can be
useful for debugging to log an error message that tells which event was
affected. Do so.
Reported-by: Coverity CID=35483[6-9]
Reported-by: Coverity CID=35484[01]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ThreadProxy IPA template does not implement a constructor and the
default compiler generated constructor does not initialise the private
ipa_ pointer.
Whilst this should not be expected to be used while uninitialised, it
does get caught by static analysis for every IPA module constructed, so
lets be clean and fix it.
Reported-by: Coverity CID=350116
Reported-by: Coverity CID=350123
Reported-by: Coverity CID=350140
Reported-by: Coverity CID=350147
Fixes: 7832e19a599e ("utils: ipc: add templates for code generation for IPC mechanism")
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting in version 0.22, the NearestCentroid function is only available
in the sklearn.neighbors namespace, when it was previously available in
both the sklearn.neighbors.nearest_centroid and sklearn.neighbors
namespaces. Use sklearn.neighbors as it works on all versions of
sklearn.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The OpenCV findHomography function now raises an unhandled error if it
receives fewer than 4 points whereas previously the limit was 3. This
makes no material difference to the behaviour of the tuning tool as it
will continue to search for the Macbeth chart at different scales.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Isolated IPAs are forked to a new process by the proxy worker, which
shares the same process group. This allows the undesired effect that
the proxy worker will receive signals such as SIGINT and will be closed
by a Ctrl-C event before the pipeline handlers have been able to fully
clean up.
Prevent this signal from being delivered to the proxy worker by moving
the process to a new process group, matching the pid of the isolated
proxy.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=60
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
ControlSerializer should be reset during IPA (re)configuration,
so that it doesn't look up stale deserialized cache built from
consecutive previous runs. This is already recommended in
ControlSerializer docs but the implementation seems missing.
The stale cache lookup seems to the core issue with Bug #58.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=58
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The mojo parser is fine if there are types that are used in array/map
members that it does not know about. These are usually caught by the C++
compiler, because the generated code refers to unknown types. This
feature is necessary for us for supporting FrameBuffer::Plane as an
array/map member, since as long as the type has an IPADataSerializer and
the struct defined in C++, the generated code will run fine
(FrameBuffer::Plane is not defined anywhere in mojom but is used as an
array member in IPABuffer).
The types that are defined in controls.h (or any header included in
ipa_interface.h) will all be compiled by the C++ compiler fine, since
the generated files all include controls.h. The types that are there
that are not ControlInfoMap or ControlList (like ControlValue) will
still fail at the linker stage. For example:
struct A {
array<ControlValue> a;
};
will compile fine, but will fail to link, since
IPADataSerializer<ControlValue> doesn't exist. This behavior, although
not the best, is acceptable.
The issue is that if ControlInfoMap or ControlList are used as array/map
members without the libcamera prefix, the compiler will not complain, as
the types are valid, and the linker will also not complain, as
IPADataSerializer<ControlList> and IPADataSerializer<ControlInfoMap>
both exist. However, the code generator will not recognize them as
types that require a ControlSerializer (since mojo doesn't recognize
them, so they are different from the ones that it does recognize with
the libcamera namespace), and so the ControlSerializer will not be
passed to the serializer in the generated code. This is the cause of the
FATAL breakage:
FATAL IPADataSerializer ipa_data_serializer.cpp:437 ControlSerializer
not provided for serialization of ControlInfoMap
Since ControlInfoMap and ControlList are the only types that will run
into this issue, we solve this by simply detecting if they are used
without the prefix, and produce an error at that point in the code
generator. As the code generator stage no longer has information on the
source code file and line, we output the struct name in which the error
was found (ninja will output the file name).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Take the SPDX header from the mojom file. Error out if the mojom file
has no SPDX header.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add a script to extract doxygen documentation comments from mojom files.
It matches based on ^\/\*\*$ for start of block and ^ \*\/$ for end of
block, and simply copies the comments to the output file along with a
header and the libcamera namespace.
Also add it to the meson file so it is usable by other meson files.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update mojo from the Chromium repository. The commit from which this was
taken is:
9c138d992bfc1fb8f4f7bcf58d00bf19c219e4e2 "Updating trunk VERSION from
4523.0 to 4524.0"
The update-mojo.sh script was used for this update.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=34
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a script to ease updating mojo from a chromium source tree.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Moving the core.mojom documentation to its corresponding .cpp file
(core_ipa_interface.cpp). This will allow Doxygen to generate the
documentation for IPABuffer, IPASettings and IPAStream structures.
Since the .mojom files are placed in include/ directory, the .cpp file
will live in $sourcedir/src/libcamera/ipa/ - which can also contain
documentation for other mojom generated IPA interfaces in subsequent
commit.
Also hide the constructors in generated IPA interface from doxygen,
via #ifndef __DOXYGEN__. These constructors provide no major value in
documenting them, instead will spew out doxygen warnings during the
build.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Structs defined in mojom previously used the namespace of the mojom file
that was being used as the source. This is obviously not the correct
namespace for structs that are defined in core.mojom. Fix the jinja
function for getting the element type including namespace, and use it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Asynchronous tasks can only be submitted while the IPA is running.
Further more, the shutdown sequence can not be tracked with a simple
running flag. We can also be in the state 'Stopping' where we have not
yet completed all events, but we must not commence anything new.
Refactor the running_ boolean into a stateful enum to track this.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Events may be queued to the pipeline handler between the pipeline
handler entering the ::stop() function, and before the call to stop the
IPA has completed.
Handle these events by dispatching all pending messages at the proxy
after the IPA has fully stopped.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signals and calls from the IPA should not occur after the IPA has been
put into the stopped state.
Add assertions to catch and prevent any messages being processed after
this.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This script will parse log output from the DelayedControls helper, when
enabled with:
LIBCAMERA_LOG_LEVELS=DelayedControls:0
It tabulates all control queuing/writing/getting per frame and warns
about potential issues related to frame delays not being account for, or
writes that are lagging behind or missed.
Run with the following command:
python3 ./delayedctrls_parse.py <logfile>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix python raw strings]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To make it more convenient for synchronous IPA calls to return a status,
convert the first output into a direct return if it is an int32.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add support to the mojom-based code generator for custom parameters to
init(). Remove the parameter type and count validation as well.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a script to update the local copy of kernel headers (in
include/linux/) from a Linux kernel git tree. The script handles header
installation, manual processing of the IPU3 header that is still in
staging, and update of the README file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The has_input variable is unused, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The header add checker only handles added header, which makes it miss
issues when a header is renamed. Fix it.
Fixes: 8fffab46b80f ("utils: checkstyle.py: Add header add checker")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
