| Age | Commit message (Collapse) | Author |
|---|
|
Add awb, blc, cproc, filter, and gamma to the tuning file. These don't
need any configuration.
At the moment there are no inter-module dependencies in the tuning
process. We can therefore safely sort them alphabetically. As soon as
the first dependency gets introduced (most likely lsc -> ccm) we will
see how to solve that.
The output order controls the order of processing in the IPA. It is now
also in alphabetical order which happens to be no change for the modules
that existed previously. For the others, there is no need for a specific
order.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a static module class, that can be used to add static data to the
tuning file. This is propably not the best solution, but allows us to
progress without writing lots of dummy classes for static cases.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
There are valid cases where a module returns None. E.g. no images were
provided for LSC calibration. We should however define proper semantics
there. Continue with a warning for now.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Make it clear that no lsc calibration was done by returning None instead
of a incomplete configuration.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Implement a minimal ccm calibration module. For now it doesn't take the
results from lsc into account and supports rkisp1 only.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Remove the need for the Cam object, as we don't want to port
it from Raspberry Pi.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In the Image class the variable holding the color temperature is named
color instead of col which was used by the raspberry pi scripts. Rename
accordingly.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Based on the input images, the lsc values could exceed the range allowed
by the rkisp1. As we are now clipping the values, we can simplify the
value mapping.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Print a info on every image that gets processed and a warning on every
image that gets ignored.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add the missing pieces and store the result inside the image object.
This solution is not very nice, and should be refactored soon. For that
we need a concept to collect temperature and/or image specific results
in a central place. For now it serves the purpose.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
At the moment this just reads the yaml file and returns it verbatim.
This needs to evolve further in the near future.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the tuning datasets, the files had names like
'imx335_1600l_3000k_1.dng'. That failed on the old filename parsing
function. As there is no need to dictate the order of the tags, split
the big regex into chunks and parse them one by one. This also makes
the code easier to digest.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The old function uses PIL to save the image, which is not in the
requirements file. As we are already requiring opencv, use that to save
images instead of an additional dependency
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In ctt_ccm.py the logging functionality of the Cam object was used. As
we don't want to port over that class, it needs to be replaced anyways.
While at it, also replace the eprint function as it doesn't add any
value over the logging framework and misses the ability for easy log
formatting.
For nice output formatting add the coloredlogs library.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Fix imports to match new structure in the files copied from Raspberry
Pi. Add missing imports in macbeth.py. Add missing dependencies to
requirements.txt.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a requirements file to ease the installation and use of the tuning
scripts. Document that in the readme. No debian packages are provided as
rawpy is not packaged as deb. So pip has to be used anyways.
Also add pyyaml which was missing in the dependencies.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Copy visualize_macbeth_chart from raspberry pi. It is copied verbatim
and does not work in this state.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Copy ctt_{awb,ccm,colors,ransac} from the raspberrypi tuning scripts as
basis for the libcamera implementation. color.py was renamed to
ctt_colors.py to better express the origin.
The files were taken from commit 66479605baca ("utils: raspberrypi: ctt:
Improve the Macbeth Chart search reliability").
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Opencv fails to load the image. The added license destroys the magic
number. Fix, by moving the licence below the magic number.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul ELder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Port commit 66479605baca ("utils: raspberrypi: ctt: Improve the Macbeth
Chart search reliability") into libtuning.
Previously the code would brighten up images in case the Macbeth Chart
is slightly dark, and also zoom in on sections of it to look for
charts occupying less of the field of view. But it would not do both
together.
This change makes the search for smaller charts also repeat that
search for the brightened up images that it made earlier, thereby
increasing the chances of success for non-optimal tuning images.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Image class incorrectly parses data in GBRG bayer formats as the
indices to the channels are set incorrectly - fix it.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the skeletal AGC module to the rkisp1 tuning script. For now it just
spits out hardcoded values.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a skeletal AGC module just so that we can have some AGC tuning
values that we can use to test during development of AGC in the IPAs. As
rkisp1 is the main target, we only add support for rkisp1 for now.
The parameters are mostly copied from the hardcoded values in ctt,
except for the metering modes.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A max_gain parameter is added to the config file which we pass to the
lens shading calibration. This clamps the maximum luminance gain that
gets written into the tuning files so as to prevent overflows.
It is particularly useful for lenses that cut off the light completely
from the sensor corners, and allows usable tables to be generated for
them.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This change adds functionality to the convert_tuning.py script to
convert between vc4 and pisp target tuning files. The conversion is
done on a best effort basis, and should provide functional tuning files.
However, a full tuning for the target platform is always preferred.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The various boilerplate parts of the tuning file are extended to
include the necessary extra bits for HDR, specifically:
* rpi.denoise has different configurations for HDR modes
* rpi.agc now has extra channels for HDR
* rpi.hdr parameters are added.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Changed how users select which platform to tune for. Now users
specify a command line argument, '-t', to specify which target
platform.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Added the ability to tune the chromatic aberration correction
within the ctt. There are options for cac_only or to tune as part
of a larger tuning process. CTT will now recognise any files that
begin with "cac" as being chromatic aberration tuning files.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The old ctt.py and alsc_only.py scripts are removed.
Instead of ctt.py use ctt_vc4.py or ctt_pisp.py, depending on your
target platform.
Instead of alsc_only.py use alsc_vc4.py or alsc_pisp.py, again
according to your platform.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
linux/udmabuf.h will be used by upcoming DmaBufAllocator changes and it
is not available on some older kernels.
Add it to the headers to sync.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The issue checkers display the line number and line content of each
offending line, but don't show the location of the issue within a line.
Improve checkstyle by adding a marker that points to the exact location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera uses lowercase hex values. Add a corresponding checker.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
|
|
math.h is an exception to the C compatibility header rule, as we prefer
using cmath. Extend the IncludeCheck to warn about it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IncludeCheck warns when code uses C++ standard library headers where
corresponding C compatibility headers are preferred. We have an
exception to that rule for math.h, where cmath is prefered. In order to
prepare for extending checkstyle.py to enforce that rule, refactor the
way the IncludeChecker identifies headers. No functional change is
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in
template files and templates embedded in generator scripts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Generate maps for each control enum which associate strings that
represent the enum values with the values themselves. This change
will allow us to refer to enumerated control values using the
string. For example if we want to pass variables to an algorithm
for use when a control has a particular value we can embed within
tuning files a dictionary that uses the control values as keys.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are two places where "output" is spelled as "ouput".
Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera documentation style calls for no period at the end of the
Doxygen one-liner commands (\brief, \param and \return). Extend the
DoxygenFormatter class to drop the period.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It's a good practice to use r'' strings for regular expressions in
Python, to avoid unexpected interaction with string escape sequences.
Use them globally. This allows simplifying escaping in one of the
regular expression strings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
musl does not implement GNU basename extention and with latest musl
the prototype from string.h is also removed [1] which now results in
compile errors e.g.
../git/utils/ipu3/ipu3-pack.c:21:47: error: call to undeclared function 'basename'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
These utilities are using this function in usage() which is used just
before program exit. Always use the basename APIs from libgen.h which is
posix implementation
[1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an async main interface function is defined with no parameters, there
would be a compilation error complaining about an extra comma. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an event function is defined with no parameters, there would be a
compilation error complaining about unused parameters in the generated
code for the data and dataSize parameters that would normally correspond
to serialized data. Fix this by simply marking the parameters as
maybe_unused.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Change the names of python packages in the list of dependencies to the
exact names that should be used in the pip install command.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
If a file misses the newline at the end it gets detected by checkstyle,
but the resulting patch is incorrect and does not apply. It took me a
while to understand that it wasn't me using checkstyle incorrectly, but
that the patch was faulty. The bug itself is in difflib and dates back to
2008.
To reproduce:
- Remove trailing newline from a file
- git add the file
- run ./utils/checkstyle.py -s | patch -p0
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
An unruly libcamera maintainer merged the wrong patch adding the
Co-developed-by: tag to the known_trailers.
Fix the sort order alphabetically to match the version which should have
been merged.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add Co-developed-by to known_trailers to silence false positive
"Invalid commit trailer key 'Co-developed-by'" warnings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The data parsed by ipu3-unpack is written out using the write() c
library call, but the error code is incorrectly checked which misses the
single erroroneous return value returned by the function.
Fix it to explicitly check against the error code.
Fixes: 23ac77dc4a09 ("utils: ipu3: Add IPU3 raw capture unpack utility")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The python3 binary may be present in a location other than /usr/bin/.
Use /usr/bin/env to locate it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
