| Age | Commit message (Collapse) | Author |
|---|
|
ControlSerializer should be reset during IPA (re)configuration,
so that it doesn't look up stale deserialized cache built from
consecutive previous runs. This is already recommended in
ControlSerializer docs but the implementation seems missing.
The stale cache lookup seems to the core issue with Bug #58.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=58
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The mojo parser is fine if there are types that are used in array/map
members that it does not know about. These are usually caught by the C++
compiler, because the generated code refers to unknown types. This
feature is necessary for us for supporting FrameBuffer::Plane as an
array/map member, since as long as the type has an IPADataSerializer and
the struct defined in C++, the generated code will run fine
(FrameBuffer::Plane is not defined anywhere in mojom but is used as an
array member in IPABuffer).
The types that are defined in controls.h (or any header included in
ipa_interface.h) will all be compiled by the C++ compiler fine, since
the generated files all include controls.h. The types that are there
that are not ControlInfoMap or ControlList (like ControlValue) will
still fail at the linker stage. For example:
struct A {
array<ControlValue> a;
};
will compile fine, but will fail to link, since
IPADataSerializer<ControlValue> doesn't exist. This behavior, although
not the best, is acceptable.
The issue is that if ControlInfoMap or ControlList are used as array/map
members without the libcamera prefix, the compiler will not complain, as
the types are valid, and the linker will also not complain, as
IPADataSerializer<ControlList> and IPADataSerializer<ControlInfoMap>
both exist. However, the code generator will not recognize them as
types that require a ControlSerializer (since mojo doesn't recognize
them, so they are different from the ones that it does recognize with
the libcamera namespace), and so the ControlSerializer will not be
passed to the serializer in the generated code. This is the cause of the
FATAL breakage:
FATAL IPADataSerializer ipa_data_serializer.cpp:437 ControlSerializer
not provided for serialization of ControlInfoMap
Since ControlInfoMap and ControlList are the only types that will run
into this issue, we solve this by simply detecting if they are used
without the prefix, and produce an error at that point in the code
generator. As the code generator stage no longer has information on the
source code file and line, we output the struct name in which the error
was found (ninja will output the file name).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Take the SPDX header from the mojom file. Error out if the mojom file
has no SPDX header.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add a script to extract doxygen documentation comments from mojom files.
It matches based on ^\/\*\*$ for start of block and ^ \*\/$ for end of
block, and simply copies the comments to the output file along with a
header and the libcamera namespace.
Also add it to the meson file so it is usable by other meson files.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update mojo from the Chromium repository. The commit from which this was
taken is:
9c138d992bfc1fb8f4f7bcf58d00bf19c219e4e2 "Updating trunk VERSION from
4523.0 to 4524.0"
The update-mojo.sh script was used for this update.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=34
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Moving the core.mojom documentation to its corresponding .cpp file
(core_ipa_interface.cpp). This will allow Doxygen to generate the
documentation for IPABuffer, IPASettings and IPAStream structures.
Since the .mojom files are placed in include/ directory, the .cpp file
will live in $sourcedir/src/libcamera/ipa/ - which can also contain
documentation for other mojom generated IPA interfaces in subsequent
commit.
Also hide the constructors in generated IPA interface from doxygen,
via #ifndef __DOXYGEN__. These constructors provide no major value in
documenting them, instead will spew out doxygen warnings during the
build.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Structs defined in mojom previously used the namespace of the mojom file
that was being used as the source. This is obviously not the correct
namespace for structs that are defined in core.mojom. Fix the jinja
function for getting the element type including namespace, and use it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Asynchronous tasks can only be submitted while the IPA is running.
Further more, the shutdown sequence can not be tracked with a simple
running flag. We can also be in the state 'Stopping' where we have not
yet completed all events, but we must not commence anything new.
Refactor the running_ boolean into a stateful enum to track this.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Events may be queued to the pipeline handler between the pipeline
handler entering the ::stop() function, and before the call to stop the
IPA has completed.
Handle these events by dispatching all pending messages at the proxy
after the IPA has fully stopped.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signals and calls from the IPA should not occur after the IPA has been
put into the stopped state.
Add assertions to catch and prevent any messages being processed after
this.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To make it more convenient for synchronous IPA calls to return a status,
convert the first output into a direct return if it is an int32.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add support to the mojom-based code generator for custom parameters to
init(). Remove the parameter type and count validation as well.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The has_input variable is unused, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Run mojo from meson to generate the header, serializer, and proxy files
for every pipeline's mojom data definition file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
On some systems, python2 might still be the default python. Enforce
python3 by wrapping the mojo parser script in a python3 script. This
also has the benefit of not modifying mojo.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
We want to avoid changing our copy of mojo to make updates easier. Some
parameters in the mojo generator script needs to be changed though; add
a wrapper script that sets these parameters.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add templates to mojo to generate code for the IPC mechanism. These
templates generate:
- module header
- module serializer
- IPA proxy cpp, header, and worker
Given an input data definition mojom file for a pipeline.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Specify in the readme and meson file that we depend on python3-ply and
python3-jinja2 for generating the IPA interface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Import mojo from the Chromium repository, so that we can use it for
generating code for the IPC mechanism. The commit from which this was
taken is:
a079161ec8c6907b883f9cb84fc8c4e7896cb1d0 "Add PPAPI constructs for
sending focus object to PdfAccessibilityTree"
This tree has been pruned to remove directories that didn't have any
necessary code:
- mojo/* except for mojo/public
- mojo core, docs, and misc files
- mojo/public/* except for mojo/public/{tools,LICENSE}
- language bindings for IPC, tests, and some mojo internals
- mojo/public/tools/{fuzzers,chrome_ipc}
- mojo/public/tools/bindings/generators
- code generation for other languages
No files were modified.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
