| Age | Commit message (Collapse) | Author |
|---|
|
The V4L2M2MDevice requires two video devices to be configured. This
makes it unsuitable to reuse the existing V4L2DeviceTest test library in
its current form.
Implement a full test to run the two M2M pipelines through VIM2M.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Linux commit b6c61a6c37317efd ("media: vimc: propagate pixel format in
the stream") changes the sensor in the vimc media graph to accept all
media bus format currently described in Linux. This prevents the
camera-sensor test case to verify that a supported media bus format is
selected from a list of defined formats, fix this by using an invalid
media bus format in the test case.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Most of the video device tests are based on vimc and Linux commit
85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format")
changes the default media bus format for the debayer subdevices. This
leads to a -EPIPE error when trying to use the raw capture video device
nodes.
Fix this by explicitly setting media bus and pixel formats to known good
values which works before and after the upstream change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer
format") which is part of v5.2 changes the default media bus format for
the debayer subdevices. This leads to a -EPIPE error when trying to use
the raw capture video device nodes.
Fix this by moving the vimc pipeline to use the RGB/YUV Capture capture
video node. As a consequence of this change the scaler in the vimc
pipeline is used and a hard coded upscale of 3 is present in the video
pipeline. This limits the sizes exposed and accepted by libcamera to
multiples of 3.
Update the buffer import test case to match this new format constraint
by setting the resolution to 1920x1080, a resolution which works with
both vimc and vivid. With this new resolution the buffer import test
takes a bit more time to complete 60 buffers and it's runtime also needs
to be increased.
The raw capture video node still needs to be handled by the pipeline as
its format needs to be updated to allow the pipeline format validation
to pass.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The FrameSink::cleanup() call checks if video_ is set before cleaning up
and then deleting the object.
If the cleanup() call is called twice for any reason, this will
encounter a use-after-free as the video_ pointer is not cleared after
deletion.
Whilst cleanup() is not currently called twice consecutively, to prevent
errors in the future, make it explicit that the object has been deleted
by clearing the stale pointer.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Since there are two logging tests now, move them to their own
subdirectory. Update meson as necessary.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test to test that logging works in isolated child processes.
Only logSetFile is tested, because stdout and stderr are closed for
isolated child processes, and syslog and the none logging destinations
are expected to be the same as non-isolated processes.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test the new logSetStream logging API call. Reorganize the logging API
tests at the same time.
logSetTarget for the syslog logging destination is not tested.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Reserve identifiers for user-defined message types and add an operation
to the Message class to register the type identifiers.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Test buffer importing and mapping by streaming the VIMC camera to VIVID
video output device performing zero-copy memory sharing using dmabuf
file descriptors.
The test cycle 20 buffers between the camera and the output with a 1:1
buffer index to dmabuf fd mapping, then randomises the mapping with the
same number of buffers on each side for 20 more frames, to finally
increase the number of buffers on the output side for the 20 last
frames. No remapping of dmabuf fd to buffer index should occur for the
first 40 frames.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The cam and qcam applications, as well as the camera capture test case,
access the Stream::bufferPool in order to know how many requests to
initially queue. As part of an effort to remove access to the buffer
pool from applications, use the buffer count from the stream
configuration instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When stopping the stream buffers have been queued, in which case their
completion is never be notified to the user. This can lead to memory
leaks. Fix it by notifying completion of all queued buffers with the
status set to error.
As a result the base PipelineHandler implementation can be simplified,
as all requests complete as the result of stopping the stream. The
stop() method that manually completes all queued requests isn't needed
anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Buffer class is a large beast the stores information about the
buffer memory, dynamic metadata related to the frame stored in the
buffer, and buffer reference data (in the index). In order to implement
buffer import we will need to extend this with dmabuf file descriptors,
making usage of the class even more complex.
Refactor the Buffer class by splitting the buffer memory information to
a BufferMemory class, and repurposing the Buffer class to reference a
buffer and to store dynamic metadata. The BufferMemory class becomes a
long term storage, valid and stable from the time buffer memory is
allocated to the time it is freed. The Buffer class, on the other hand,
becomes transient, is created on demand when an application requires a
buffer, is given to a request, and is deleted when the request
completes.
Buffer and BufferMemory don't need to be copied, so their copy
constructor and assignment operators are deleted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When starting the stream on a capture video device it is often needed to
queue all the allocated buffers. Add a helper method to do so, and
refactor the existing queueBuffer() method to make it clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Lower the resolution to the smallest vivid supports, 320x180, in order
to speed up the test. This isn't enough in itself as the frame rate also
has to be configured, but the V4L2VideoDevice class doesn't support
frame rate control yet. In the meantime the frame rate can be set
manually with yavta or v4l2-ctl.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit a25c937f8afe ("test: add logging API test") causes the build to
fail in the Chromium OS build environment, because the return value of a
function call marked with the __warn_unused_result__ attribute is ignored.
Fix this.
Fixes: a25c937f8afe ("test: add logging API test")
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an IPAProxy class whose implementations will act as a proxy between a
pipeline handler and an isolated IPA interface. Also add an IPAProxyFactory
that will construct the IPAProxy implementations as necessary.
Update Doxygen to ignore the directory where IPAProxy implementations will
reside.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a Process class to abstract a process, and a ProcessManager singleton
to monitor and manage the processes.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a field to IPAModuleInfo to contain the license of the module.
This license field will be used to determine whether the IPA module
should be run in an isolated process or not. If the license is open
source, then the IPA module will be allowed to run without process
isolation, if the user enables it. If the license is not open source,
then the IPA module will be run with process isolation.
Update the dummy IPA and IPA test to conform to the new struct layout.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that setting the log file and log levels works from an application
point of view. The test uses the internal logging mechanism as well,
just to write to the log file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add tests that exercises the Object-related signal code paths (in
particular automatic disconnection on Signal deletion) when the receiver
inherits from multiple base classes, with Object being the second base.
This tests the casts to and from Object * in the signal implementation.
The new tests segfault due bugs in the signal/slot implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The test case creates a receiver inheriting from Object, connects a
signal to one of its slot, moves the receiver to a different thread,
emits the signal and verifies that it gets delivered in the correct
thread with the expected value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Message class test creates a receiver inheriting from Object, moves
it to a different thread, sends a message to the receiver and verifies
that the message is delivered in the correct thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Thread test case verifies that
- a Thread instance is created for the main thread
- a new Thread can be created, started, and stopped
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA, IPC and Stream tests are self-contained so they can run in
parallel.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add tests of the ControlList infrastructure and public API.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Provide an initial test coverage for the ControlInfo class.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add initial basic testing for the new ControlValue class.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that the IPC supports sending data and file descriptors over the
IPC medium. To be able to execute the test two parts are needed, one
to drive the test and act as the libcamera (master) and a one to act as
the IPA (slave).
The master drives the testing posting requests to the slave to process
and sometimes respond to. A few different tests are performed.
- Master sends an array to the slave which responds with a reversed copy
of the array. The master verifies that a reversed array is returned.
- Master tries to send an empty message making sure that the send call
fails.
- Master sends a list of file descriptors and ask the slave to calculate
and respond with the sum of the size of the files. The master verifies
that the calculated size is correct.
- Master sends a pre-computed size and a list of file descriptors and
asks the slave to verify that the pre-computed size matches the sum of
the size of the file descriptors.
- Master sends two file descriptors and asks the slave to join the file
contents in a new file and respond with its file descriptor. The
master then verifies that the content of the returned file descriptor
matches the order of the original two files.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Timers should be automatically stopped and unregistered when deleted.
Add a test to verify this is the case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation of creating a new V4L2Device base class, rename
V4L2Device to V4L2VideoDevice.
This is a project wide rename without any intended functional change.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that both discrete and range based stream format descriptions
result in good discrete frame sizes. The range based stream formats
needs to be fitted with a table of resolutions inside libcamera so if
that table is updated this test might need to be updated.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all usage of FormatEnum with ImageFormats and completely
remove FormatEnum which is no longer needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test to verify media bus codes, sizes and resolution retrieval
through the CameraSensor API based on the Sensor A in the vimc pipeline.
Also check that the getFormat() method returns the expected media bus
code and size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state
before sleep") changes the frame rate when capturing from the vimc raw
capture video nodes. The commit changes the frame rate from thousands of
frames per second to to roughly fifty.
The libcamera capture test was written with the assumption that vimc
would keep providing this fast frame rate and ran for a very short time
to decrease the overall run time of tests. This is no longer possible
and the test fails as it can't capture enough frames in its runtime,
increase the runtime to match the new vimc frame rate.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Three tests {capture,configuration_set,statemachine} override the
CameraTest::init() function, and call it as the first action.
However they were not checking the return value, and each of the tests
will segfault if the VIMC camera is not obtained.
Check the return value of the CameraTest base class initialisation and
return any errors to the test suite if initialisation fails.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the dummy IPA for testing/sample IPA instead of the earlier test
IPA. Remove the test IPA, and update tests and meson accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAManager is a class that will search in given directories for IPA
modules, and will load them into a list. It also provides an interface
for pipeline handlers to acquire an IPA.
A meson build file for the IPAs is added, which also specifies a
hard-coded path for where to load the IPAs from in the installation
directory. More paths can be specified with the environment variable
LIBCAMERA_IPA_MODULE_PATH, with the same syntax as the regular PATH
environment variable. Make the test framework set this environment
variable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need a way to match pipelines with IPA modules, so add fields in
IPAModuleInfo to hold the IPA module API version number, the pipeline
name, and the pipeline version.
The module API version is used to determine the layout of struct
IPAModuleInfo.
Also update IPA module tests and Doxygen accordingly. Doxygen needs to
be updated to accomodate __attribute__((packed)).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Define an IPAInterface class which will contain an IPA implementation.
The methods that the IPAInterface exposes form the interface to the IPA
implementation, hence the name. IPA module shared objects will implement
this class.
This also means that IPA module shared objects must be implemented in
C++, so remove the C test IPA module.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Argument name differs from definition and implementation, fix it by
renaming the definition. While at it make the argument const.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of manually adding the libcamera library and include path to
every target that requires it, declare a dependency that groups the
headers as source, the library and the include path, and use it through
the project. This simplifies handling of the dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Consistently go for 4 spaces indentation, and always put a space between
the colon in argument lists, as per the examples from the meson
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraConfiguration class implements a simple storage of
StreamConfiguration with internal validation limited to verifying that
the stream configurations are not empty. Extend this mechanism by
implementing a smart validate() method backed by pipeline handlers.
This new mechanism changes the semantic of the camera configuration. The
Camera::generateConfiguration() operation still generates a default
configuration based on roles, but now also supports generating empty
configurations to be filled by applications. Applications can inspect
the configuration, optionally modify it, and validate it. The validation
implements "try" semantics and adjusts invalid configurations instead of
rejecting them completely. Applications then decide whether to accept
the modified configuration, or try again with a different set of
parameters. Once the configuration is valid, it is passed to
Camera::configure(), and pipeline handlers are guaranteed that the
configuration they receive is valid.
A reference to the Camera may need to be stored in the
CameraConfiguration derived classes in order to access it from their
validate() implementation. This must be stored as a std::shared_ptr<> as
the CameraConfiguration instances belong to applications. In order to
make this possible, make the Camera class inherit from
std::shared_from_this<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To prepare for specialising the CameraConfiguration class in pipeline
handlers, return a pointer to a camera configuration instead of a
reference from Camera::generateConfiguration(). The camera configuration
always needs to be allocated from the pipeline handler, and its
ownership is passed to the application.
For symmetry, change Camera::configure() to take a CameraConfiguration
pointer instead of a reference. This aligns with our coding practice of
passing parameters that are modified by the callee by pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Refactor the CameraConfiguration structure to not rely on Stream
instances. This is a step towards making the camera configuration object
more powerful with configuration validation using "try" semantics.
The CameraConfiguration now exposes a simple vector-like API to access
the contained stream configurations. Both operator[]() and at() are
provided to access elements. The isEmpty() method is renamed to empty()
and the methods reordered to match the std::vector class.
As applications need access to the Stream instances associated with the
configuration entries in order to associate buffers with streams when
creating requests, expose the stream selected by the pipeline handler
through a new StreamConfiguration::stream().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to prepare for an API overhall of the camera configuration
generation, remove the StreamUsage class and replace its uses by stream
roles. The size hints can't be specified anymore, and will be replaced
with an API on the StreamConfiguration to negotiate configuration
parameters with cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Rename the configureStreams() and streamConfiguration() methods to
configure() and generateConfiguration() respectively in order to clarify
the API. Both methods deal with CameraConfiguration objects, and are
thus not limited to streams, even if a CameraConfiguration currently
contains streams only.
While at it, remove the qcam MainWindow::configureStreams() method that
is declared but never defined or used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add tests to test the the IPAModule class, for loading the IPA module
info from IPA module .so shared objects, with modules written in both C
and C++.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The vimc driver delivers frames much faster then the vivid driver hence
most v4l2 device tests complete much quicker if vimc is used. The only
v4l2 device test which can't be switched is buffer_sharing as it needs
to import buffers somewhere, something vimc do not support.
With this change I manage to shave of almost 7 seconds for each run of
all v4l2 device tests.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
