| Age | Commit message (Collapse) | Author |
|---|
|
Multistream test failed with the following logs, to run on Raspberry Pi 4 due
to a bug introduced in one of the recent patches refactoring the code
that fails to set the camera-name property with a valid camera id
string.
WARN libcamerasrc gstlibcamerasrc.cpp:347:gst_libcamera_src_open:<libcamera> error: Could not find a camera named ''.
WARN libcamerasrc gstlibcamerasrc.cpp:347:gst_libcamera_src_open:<libcamera> error: libcamera::CameraMananger::get() returned nullptr
This patch assigns the camera->id() to the variable cameraName_ that is
later used to set element property "camera-name" needed to call the
specific camera which supports multistreams. Move the code to set
element property "camera-name" to base class GstreamerTest.
Fixes: 5646849b59fe ("test: gstreamer: Check availability of cameras before running")
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Reviewed-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The default ControlInfo constructor allows partially initialising the
min/max/def values. Uninitialised values are assigned to 0 by default.
This implicit initialisation makes it impossible to distinguish between
an uninitialised and an explicitly 0-initialised ControlValue.
Default construct the ControlValue in the ControlInfo default contructor to
explicitly represent uninitialised values by the ControlTypeNone type.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
ColorSpace can be adjusted based on the stream's pixelFormat being
requested. Add a test to check the adjustment logic defined in
ColorSpace::adjust().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
libcamera::File::exists() takes a const reference to a std::string and
clang-tidy's readability-redundant-string-cstr check warns about it:
> ../test/camera/camera_reconfigure.cpp:182:21: warning: redundant call to 'c_str' [readability-redundant-string-cstr]
> if (File::exists(pname.c_str())) {
> ^~~~~~~~~~~~~
> pname
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test for the ColorSpace class that exercises the toString() and
fromString() functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The StringSplitter::iterator is used with the utils::split() function to
iterate over components of a split string. Add the necessary member
types expected by std::iterator_trait in order to satisfy the
LegacyInputIterator requirement and make the iterator usable in
constructors for various containers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The YamlObject::get() function template is implemented for 16-bit and
32-bit integers. Add an 8-bit specialization that will be used in the
rkisp1 IPA module, and extend the unit tests accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add 16-bit integer parsing tests, including a test to verify the
out-of-range checks when parsing 32-bit integers as 16-bit values. That
test currently fails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Centralize the signed and unsigned integer parse checks to avoid code
duplication. The diffstat isn't very impressive at this point, but this
will help more when adding 8-bit and 16-bit integer tests.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Centralize most parse failure checks in a single function to avoid a
larger number of copies of nearly identical checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
These headers are not used as reported by clangd.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Blocking wait can be easily implemented on top in Python, so rather than
supporting only blocking reads, or supporting both non-blocking and
blocking reads, let's support only non-blocking reads.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is a partial revert of commit 395d43d6d75b ("libcamera:
v4l2_videodevice: Drop toV4L2PixelFormat()")
The function was removed because it incorrectly maps non-contiguous V4L2
format variants (ie V4L2_PIX_FMT_YUV420M) to the API version supported
by the video device (singleplanar API and multiplanar API). It was
decided at the time to remove the function and let its users call
directly V4L2PixelFormat::fromPixelFormat() which accepts a
'multiplanar' flags.
As we aim to associate multiple V4L2PixelFormat to a single libcamera
format, the next patches will verify which of them is actually supported
by the video device. For now, return the contiguous version
unconditionally.
Re-introduce V4L2VideoDevice::toV4L2PixelFormat() and convert all
the V4L2PixelFormat::fromPixelFormat() users to use it.
The V4L2 compatibility layer is the only outlier as it doesn't have a
video device to poke, hence it still uses
V4L2PixelFormat::fromPixelFormat().
Next patches will implement the device format matching logic and handle
the non-contiguous plane issue in V4L2VideoDevice::toV4L2PixelFormat().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the YamlObject::get() function override that returns a
std::optional got introduced, all tests were moved to it, leaving no
tests for the override that takes a default value. Reintroduce those
tests.
Reported-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
usage
The std::optional<T>::value_or(U &&default_value) function returns the
contained value if available, or default_value if the std::optional has
no value. If the desired default value is a default-constructed T, the
obvious option is to call std::optional<T>::value_or(T{}). This approach
has two drawbacks:
- The \a default_value T{} is constructed even if the std::optional
instance has a value, which impacts efficiency.
- The T{} default constructor needs to be spelled out explicitly in the
value_or() call, leading to long lines if the type is complex.
Introduce a defopt variable that solves these issues by providing a
value that can be passed to std::optional<T>::value_or() and get
implicitly converted to a default-constructed T.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow to retrieve a YAML list of any already supported types in a
std::vector.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While YAML specifies that mappings are unordered, the Raspberry Pi IPA
relies on elements being ordered as in the YAML data. To replace the
dependency on boost with the YamlParser class, we thus need to guarantee
that the order is preserved. Update the corresponding unit test to
ensure this. The test currently fails at the YamlParser doesn't
correctly preserve the order, this will be fixed by the next commit.
This commit should be reverted when the Raspberry Pi IPA updates to a
new tuning data format and drops support for the old format.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The YamlObject::get() function takes a default value and an optional
bool ok flag to handle parsing errors. This ad-hoc mechanism complicates
error handling in callers.
A better API is possible by dropping the default value and ok flag and
returning an std::optional. Not only does it simplify the calls, it also
lets callers handle errors through the standard std::optional class
instead of the current ad-hoc mechanism.
Provide a get() wrapper around std::optional::value_or() to further
simplify callers that don't need any specific error handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Move the logic for checking the availability of cameras from
multi_stream_test to gstreamer test base class. Since
single_stream_class always assumes that a camera is available on the
system (which is not always the case for e.g. RPi in CI/CD environments)
it makes sense to have the availability check in the base class.
If no cameras are available, the behaviour should be to skip instead
of a failure.
We currently have 2 tests for gstreamer differing based on number
of streams supported by the camera. Hence, the camera availability
is checked in conjunction with the number of the streams required by
the derived class.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The internal header isn't needed. The needed function
libcameraBuildPath() is exposed by libcamera/base/utils.h header.
At the same time, move the utils header to .cpp instead of including
it in the base class header itself.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the ControlList::get() function returns an std::optional<>, it
is the preferred way to test if a control is present in a ControlList.
Use it in the test to prepare for removal of ControlList::contains().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Commit 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_")
removed support for frame number start offset from the DelayedControls
class, as it is now guaranteed that the first sequence number as it comes
from the V4L2VideoDevice will always be 0.
However the delayed_controls.cpp unit still has two tests that passes
a non-zero first sequence number to the DelayedControl class, causing
the test to spin forever and consequentially fail.
Remove the two tests from the unit to fix this.
The first removed test was testing the class against frame start
sequence numbers greater than zero and can safely be removed.
The second test was instead validating the class against sequence number
overflow, which is now not possible to test anymore as the DelayedControls
class now assumes 0 as first frame sequence number.
Fixes: 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that YamlObject supports iteration, the memberNames() function isn't
useful anymore as it can be implemented using utils::map_keys() if
really needed. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
|
|
Test iteration over lists and dictionaries to test the YamlObject
iterator API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
|
|
There's no point in wrapping a fd into a FILE to then only call fwrite()
and fclose(). Use write() and close() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
THe FILE object isn't very user-friendly as it requires manual close.
Replace it with File to provide RAII-style resource management in the
YamlParser API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Dictionaries have a size too, extend the size() function to support
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We always call CameraManager.read_event() and
CameraManager.get_ready_requests(), so to simplify the use merge the
read_event() into the get_ready_requests().
This has the side effect that get_ready_requests() will now block if
there is no event ready. If we ever need to call get_ready_requests() in
a polling manner we will need a new function which behaves differently.
However, afaics the only sensible way to manage the event loop is to use
select/poll on the eventfd and then call get_ready_requests() once,
which is the use case what the current merged function supports.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The test_select() currently uses self.assertTrue(len(ready_reqs) > 0) to
see that cm.get_ready_requests() returns something. This is not always
the case, as there may be two eventfd events queued, and the first call
to cm.get_ready_requests() returns all the requests, and thus the second
call returns none.
Remove the self.assertTrue(len(ready_reqs) > 0) assert.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Waiting for 0.5 secs and expecting that the requests have been completed
is... bad. Fix the test case by using cam.read_event() as a blocking
wait, and wait until we have received all the requests that we queued.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera uses double quotes for #include directives for internal
headers. A few <...> have found their way in the code base over time.
Fix them.
While at it, move an Android header include to the right location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Perhaps it's better to have a more descriptive name here. I also
considered just renaming 'efd' to 'fd', but 'event_fd' won.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add CameraManager.read_event() so that the user does not need to call
os.read().
We use eventfd, and we must always read 8 bytes. Hiding that inside
read_event() makes sense.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add some annotations and self.assertIsNotNone() calls to remove the
typechecker warnings.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add checks to CameraTesterBase to verify that both the Camera and the
CameraManager gets freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
pyright complains about passing fileobj to os.read. Indeed, the
parameter should be an int, but I guess fileobj gets automatically
converted. In any case, using the fd is better.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a simple unittests.py as a base for python unittests.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
meson.source_root() and meson.build_root() are deprecated. Use
meson.project_source_root() and meson.project_build_root() instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a unit test to exercise the API of the YamlParser class.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that format classes implement the stream formatting operator<<(),
use it instead of the toString() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that geometry classes implement the stream formatting operator<<(),
use it instead of the toString() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2VideoDeviceTest class configures the capture pipeline with
parameters that are partly hardcoded, and partly come from the current
configuration of the device. In particular, with the vimc pipeline, the
sensor subdevice is configured with the size retrieved from the capture
video node, and the video node is then reconfigured to 640x480.
Relying on the current (and thus possibly random) device configuration
can lead to broken pipes when starting streaming. This currently causes
failures of the dequeue_watchdog test when run after the formats test.
Fix it by explicitly setting the same size for both the vimc subdevs and
the video capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the streamOn() call fails, there is no way the test will then
succeed. Catch it and return a failure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Failing a test without an error message makes it difficult to debug
issues. Add a message when buffer allocation fails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a test that captures 5 frames, with a short (5ms) watchdog.
The default framerate of the VIMC pipeline should ensure that
we never meet this watchdog, and the timeout should activate.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test for V4L2BufferCache::isEmpty() for various levels for cache
fullness.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The start(unsigned int msec) overload is error-prone, as the argument
unit can easily be mistaken in callers. Drop it and update all callers
to use the start(std::chrono::milliseconds) overload instead.
The callers now need to use std::chrono_literals. The using statement
could be added to timer.h for convenience, but "using" is discouraged in
header files to avoid namespace pollution. Update the callers instead,
and while at it, sort the "using" statements alphabetically in tests.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Objects are not expected to be connected to the same signal more than
once. Doing so likely indicates a bug in the code, and can be
highlighted in debug builds with an assert that performs a lookup on the
signals_ list.
While it is possible to allow the implementation to let objects connect
to a specific signal multiple times, there are no expected use cases for
this in libcamera and this behaviour is restricted to favour defensive
programming by raising an error when this occurs.
Remove the support in the test framework which uses multiple Signal
connections on the same object, and update the test to use a second
Signal.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The fence and mapped-buffer tests both use the VIMC test device and must
not be run at the same time.
Split these tests to a new group to force their isolation from running
in parallel.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a -v/--verbose argument to the v4l2_compat test to print the output
of v4l2-compliance, even when the test passes. This can be useful when
debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
