summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-08-06android: camera_device: Support MJPEG stream constructionKieran Bingham
MJPEG streams must be created referencing a libcamera stream. This stream may already be provided by the request configuration, in which case the existing stream is utilised. If no compatible stream is available to encode, a new stream is requested from the libcamera configuration. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: Introduce JPEG encodingKieran Bingham
Provide an encoder interface and implement a JPEG encoder using libjpeg. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Generate ResultMetadata earlierKieran Bingham
Generate the ResultMetadata before performing JPEG compression so that JPEG specific metadata can be added to the metadata when it has been processed. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Report configuration changes from validate()Kieran Bingham
When we call validate on a configuration, if there are any adjustments on the configuration, we fail without showing why. Display the stream configuration after the validate stage to aid debugging stream startup failures. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Query plane lengthKieran Bingham
Use lseek to query the length of planes where possible rather than leaving the plane.length as zero, which prevents mapping buffers for software processing. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Only construct required planesKieran Bingham
The camera3buffer describes the number of filedescriptors given. Don't try to construct more planes than that. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Report an error in notifyError()Kieran Bingham
If an error is generated, try to be verbose about it in the libcamera logs. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Fix trivial spellingKieran Bingham
Fix the spelling of 'successfully' reported in an error message. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: buffer: Convert copyFrom to use MappedFrameBufferKieran Bingham
Utilise the new MappedFrameBuffer helper to handle all mapping and unmapping of the copyFrom helper function. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: buffer: Create a MappedBufferKieran Bingham
Provide a MappedFrameBuffer helper class which will map all of the Planes within a FrameBuffer and provide CPU addressable pointers for those planes. The MappedFrameBuffer implements the interface of the MappedBuffer allowing other buffer types to be constructed of the same form, with a common interface and cleanup. This allows MappedBuffer instances to be created from Camera3Buffer types. Mappings are removed upon destruction. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: formats: add numPlanes helperKieran Bingham
Determine the number of planes used by a format by counting the number of PixelFormatPlaneInfo entries with a valid entry. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: buffer: Correct FrameBuffer referencesKieran Bingham
Update the remaining (capitalised) Buffer references to the new FrameBuffer object that they refer to. Lower-case 'buffer' terms are kept, as a generic reference to a buffer rather than the specific type 'FrameBuffer'. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_device: Initialize 'id_' field in constructorUmang Jain
A 'id' is passed when a new CameraDevice is constructed in order for unique identification. Failing to initialize it, will lead to the issue of garbage return value via CameraDevice::id(). Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_ops: Fix a documentation spelling typoUmang Jain
Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06android: camera_hal_manager: Remove unused getStaticMetadata() methodUmang Jain
The CameraHalManager::getStaticMethod() method isn't used, remove it. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-05libcamera: camera_manager: Enforce unique camera IDsNiklas Söderlund
The camera ID is documented that it should be unique but it's not enforced. Change this by refusing to add cameras to the CameraManager that would create two cameras with the exact same ID. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: camera: Rename name() to id()Niklas Söderlund
Rename Camera::name() to camera::id() to better describe what it represents, a unique and stable ID for the camera. While at it improve the documentation for the camera ID to describe it needs to be stable for a camera between resets of the system. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: pipeline: uvcvideo: Generate unique camera namesNiklas Söderlund
Generate camera names that are unique and persistent between system resets. The name is constructed from the USB device information as well as the USB controller on the host. Before this change example of camera names: Venus USB2.0 Camera: Venus USB2 Logitech Webcam C930e After this change the same cameras are: \_SB_.PCI0.RP05.PXSX-2.1.1:1.0-0ac8:3420 \_SB_.PCI0.RP05.PXSX-2.4:1.0-046d:0843 On OF-based system: /base/soc/usb@7e980000/usb-port@1-1.2:1.0-0ac8:3420 Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: pipelines: Use sensor ID as camera nameNiklas Söderlund
Use the CameraSensor ID as the camera name in pipelines that uses a CameraSensors, this is done in preparation of turning the camera name into an ID. The CameraSensor ID meets the requirements that will be put on camera ID. Before this change example of camera names: * OF based systems ov5695 7-0036 ov2685 7-003c * ACPI based systems ov13858 8-0010 ov5670 10-0036 * VIMC VIMC Sensor B After this change the same cameras are: * OF based systems /base/i2c@ff160000/camera@36 /base/i2c@ff160000/camera@36 * ACPI based systems \_SB_.PCI0.I2C2.CAM0 \_SB_.PCI0.I2C4.CAM1 * VIMC platform/vimc.0 Sensor B Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: camera_sensor: Add accessors for sensor IDNiklas Söderlund
Add an accessors so that the sensor ID can be used outside CameraSensor. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: camera_sensor: Generate a sensor IDNiklas Söderlund
The ID is generated from information in the firmware description of the sensor if available or from module and model information if the sensor is virtual (for example VIMC). Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: v4l2_device: Add method to lookup device pathNiklas Söderlund
Add a method to lookup a V4L2 devices path in sysfs. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: sysfs: Add helper to lookup device firmware node pathNiklas Söderlund
A system's firmware description is recorded differently in sysfs depending if the system uses DT or ACPI. Add a helper to abstract this, allowing users not to care which of the two are used. For DT-based systems, the path is the full name of the DT node that represents the device. For ACPI-based systems, the path is the absolute namespace path to the ACPI object that represents the device. In both cases, the path is guaranteed to be unique and persistent as long as the system firmware is not modified. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: sysfs: Add helper to lookup sysfs path of a character deviceNiklas Söderlund
Add a helper function to lookup the sysfs path of a character device. Store the function in a new libcamera::sysfs namespace as there is not class to host it. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve behaviour when camera mode changesDavid Plowman
Now that we stop the asynchronous thread on a SwitchMode, we would do better to regenerate all the tables if the new camera mode crops in a significantly different way to the old one. A few minor tweaks make sense along with this: * Reset the lambda values when we reset everything. It wouldn't make sense to re-start with the old mode's values. * Use the last recorded colour temperature to generate new tables rather than any default value. * Set the frame "phase" counter to ensure the adaptive procedure will run asap. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Resample luminance tableDavid Plowman
This fixes a bug where the luminance correction table was not being resampled according to the camera mode, in the same way as the colour tables. This could be noticeable if any camera modes crop aggressively. This resampling can be done "up front" in the SwitchMode, as we have only a single fixed luminance table. In order to protect the recalculation of the table from the asynchronous thread (which reads it) I've elected to wait for that thread to go idle (though I doubt it would have mattered much). As a by-product of stopping the thread, it no longer needs its own copy of the camera mode (async_camera_mode_). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve locking in a few placesDavid Plowman
Fix up a few locations where we call notify_one() with the lock held. In particular, restartAsync does not need to be called with the lock held for its entire duration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Camera mode does not need to be atomicDavid Plowman
In the libcamera framework, SwitchMode (which overwrites the camera_mode) cannot run concurrently with Prepare (which uses it). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05android: camera_device: Fix preview templateJacopo Mondi
Add 5 controls to the generate preview template to comply with the camera3 specification. This change fixes CTS 9.0.r12 test: android.hardware.camera2.cts.CameraDeviceTest#testCameraDevicePreviewTemplate Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_device: Break-out request templateJacopo Mondi
Currently the request template returned from CameraDevice::constructDefaultRequestSettings() is the same for all the supported template types. To prepare to adjust the template depending on the use case, break out the template generation to a dedicated function that supports the PREVIEW use case. All the other template types use the requestTemplatePreview() function and just update the capture intent property. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Add method to update an entryJacopo Mondi
Add a method to update an existing metadata tag entry, by wrapping the update_metadata_entry() function provided by the Android metadata library. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05andrdid: camera_device: Store const templatesJacopo Mondi
The request capture templates stored in the CameraDevice::requestTemplates_ should not be modified once created. Store a const pointer to the request templates in the class member map. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Add const version of get()Jacopo Mondi
Add a const version of the CameraMetadata::get() method to retrieve a const pointer to the camera metadata wrapped by the class instance. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Mark isValid() as constJacopo Mondi
The CameraMetadata::isValid() method does not modify the object state and can be called on const instances of the CameraMetadata class. Mark the method as const to allow that. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05cam: Use the common cleanup function on failureNiklas Söderlund
The different error paths in init() are out of sync. Instead of fixing them switch to using the cleanup() function which does the right thing for all cases. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2020-08-05libcamera: ipu3: Fix compilation issues with gcc5Jacopo Mondi
GCC5 does not provide prototypes for the math library functions defined in the math.h header for the std:: namespace. Include the C++ <cmath> header in place of <math.h> as it defines overloads for the std::abs and std::fmod function. This goes intentionally against the libcamera coding guidelines, and is reported as warning by checkpatch.py. Fixes: 968ab9bad0ed ("libcamera: ipu3: imgu: Calculate ImgU pipe configuration") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03android: camera_device: Report RAW capability if supportedNiklas Söderlund
Probe the libcamera Camera for RAW support and if supported report RAW capability in the static metadata reported to Android. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03android: camera_device: Map HAL RAW to libcamera RAW formatsNiklas Söderlund
Add a mapping from HAL RAW formats to the direct equivalent of libcamera formats. With this change it is possible to capture RAW images as long as the hardware can deliver frames in a format that is native to the HAL. More work is needed to deal with unpacked 8, 10 and 12 RAW formats as they don't directly map to a native HAL format. Nor do they belong in the RAW_OPAQUE category as the content format is generic and not uncommonly supported by hardware. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-03android: camera_device: Prepare for non-mandatory formatsNiklas Söderlund
When probing what formats a libcamera Camera supports we want to allow to probe for non-mandatory formats. Add a new flag to indicate if a format in camera3FormatsMap is mandatory or not. All current defined formats are mandatory. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-03cam: Add --monitor optionUmang Jain
Add --monitor to monitor new hotplug and unplug camera events from the CameraManager. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: stream_option: use format name to set cam/qcam formatKaaira Gupta
Replace hex input for pixel formats with their format names, for input in cam and qcam. Hence, remove the todo. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: pixel_format: Add a function to return format based on stringKaaira Gupta
Add a function which retrieves pixel format corresponding to its name from PixelFormatInfo. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: formats: PixelFormatInfo: Add name lookup functionKaaira Gupta
Add a function which returns PixelFormatInfo, given format name as a string. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: ipu3: imgu: Rename configureInput()Jacopo Mondi
The ImgUDevice::configureInput() function does not only configure the input format but applies rectangles to the IF, BDS and GDC components. Rename it to ImgUDevice::configure(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Configure ImgU with the computed parametersJacopo Mondi
Instrument the ImgUDevice::configureInput() function to use the provided pipe configuration parameters to configure the IF, BDS and GDC rectangles. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Validate the pipe configurationJacopo Mondi
Collect the desired ImgU pipe configuration while assigning streams in the pipeline handler validate() function and ask the ImgUDevice class to calculate the pipe configuration parameters. If the requested pipe configuration results in a non-valid configuration, return an error from the validate() function. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: imgu: Calculate ImgU pipe configurationJacopo Mondi
Instrument the ImgU component to dynamically calculate the image manipulation pipeline intermediate sizes. To correctly configure the ImgU it is necessary to program the IF, BDS and GDC sizes, which are currently fixed to the input frame size. The procedure used to calculate the intermediate sizes has been ported from the pipe_config.py python script, available at: https://github.com/intel/intel-ipu3-pipecfg at revision: 61e83f2f7606 ("Add more information into README") Define two structures (ImgUDevice::Pipe and ImgUDevice::PipeConfig) to allow the pipeline handler to supply and retrieve configuration parameters from the ImgU. Finally, add a new operation to the ImgUDevice that calculates the pipe configuration parameters based on the requested input and output sizes. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove camera_ from IPU3CameraConfigurationJacopo Mondi
The IPU3CameraConfiguration::camera_ shared pointer is not used. Remove it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove streams from IPU3CameraConfigurationJacopo Mondi
The IPU3CameraConfiguration::streams_ field was used to keep an association between the StreamConfiguration and the assigned streams before CameraConfiguration::setStream() was called at configure() time. The stream assignment was based on the order in which elements were inserted in the vector, implementing a fragile association between streams and their intended configurations. As it is now possible to assign streams at validation time, there is no need to keep that association in place, and the streams_ vector is now unused. Remove it and the associated accessor method from the IPU3CameraConfiguration class. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Adjust and assign streams in validate()Jacopo Mondi
Remove the adjustStream() and assignStream() methods, and perform stream adjustment and assignment while iterating the StreamConfiguration items. The adjustStream() implementation had some arbitrary assumption, like the main output having to be as large as the sensor resolution, and did not take into account the different alignment requirements between the main output and the viewfinder output. The assignStream() implementation also assumes only full-size streams can be produced by the main output, and having it as a separate function prevents adjusting streams according to which output they are assigned. Blend the two implementation in a single loop and perform the required stream adjustment and assignment in one go. As streams are now assigned at validate() time, remove the same operation from the configure() function. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>