| Age | Commit message (Collapse) | Author |
|---|
|
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation)
the gain to apply on the exposure value was only using the histogram.
Now that the global brightness of the frame is estimated too, we don't
need to remove part of the saturated pixels from the equation anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libgtest-dev is provided as a static library at least by Debian 10.
The compiler and linker to create the static library might be
different from ones used for libcamera. This causes a problem
upon linking.
This puts gtest code to subprojects, builds the code and link it
for lc-compliance. However, libgtest is locally built as a library on
ChromeOS and thus the used compiler and linker are the same as one
used for libcamera. We don't do these on ChromeOS build environment.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can report the controls::AnalogueGain metadata now that AGC is
updating it correctly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the exposure time calculated, report it in the
controls::ExposureTime and don't use the pipeline handler for it
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We use the line duration several times in the IPAIPU3. Instead of
recalculating it each time, cache the value as a utils::Duration.
ExposureTime and FrameDuration units are in micro-seconds, cast the
Duration accordingly.
As sensorInfo is no longer used in updateSessionConfiguration remove the
reference to it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that the color temperature is updated per-frame, use the value and
set the corresponding controls::ColourTemperature.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The AWB estimates the color temperature, but it is not used at all. It
can be useful for debug purpose at least, but also for lux estimation
later, to be able to know the temperature estimated for a given frame.
Add a new member to the IPAFrameContext::awb for this purpose, and
update the value in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The minimum and maximum exposure are stored in lines. Replace it by
values in time to simplify the calculations.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Previously, the exposure value was calculated based on the estimated
shutter time and gain applied. Now that we have the real values for the
current frame, use those before estimating the next one and rename the
variable accordingly.
As the exposure value is updated in the beginning of the computation,
there is no need to initialize effectiveExposureValue anymore in the
configure call, and it can be a local variable and not a class variable
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When an image is partially saturated, its brightness is not increasing
linearly when the shutter time or gain increases. It is a big issue with
a backlight as the algorithm is fading to darkness right now.
Introduce a function to estimate the brightness of the frame, based on
the current exposure/gain and loop on it several times to estimate it
again and approach the non linear function.
Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When we compute the new gain, we use the iqMean_ and estimate an
exposure value gain to apply. Return early when the gain is less than
1%.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the real exposure applied at each frame, remove the
early return based on a frame counter and compute the gain for each
frame.
Introduce a number of startup frames during which the filter speed is
1.0, meaning we apply instantly the exposure value calculated and not a
slower filtered one. This is used to have a faster convergence, and
those frames may be dropped in a future development to hide the
convergance process from the viewer.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the histogram is calculated, we check if a cell is saturated or not
before cumulating its green value. This is wrong, and it can lead to an
empty histogram in case of a fully saturated frame.
Use a constant to limit the amount of pixels within a cell before
considering it saturated. If at the end of the loop we still have an
empty histogram, then make it a fully saturated one.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=84
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pipeline handler populates the new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Make those values the frameContext::sensor values for the frame when the
EventStatReady event is received.
AGC also needs to use frameContext.sensor as its input values and
frameContext.agc as its output values. Modify computeExposure by passing
it the frameContext instead of individual exposure and gain values.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Intel close sourced IPA requires the effective controls applied to
the sensor when the statistics are generated. Report effective sensor controls
with the statistics to IPA.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
[Jean-Michel: Reword s/stastistics/statistics and move reset after IPA
start]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
IPU3Event and IPU3Action use single ControlList for both libcamera and
V4L2 controls, and it's content could be either one based on the
context. Extend IPU3Event and IPU3Action for sensor V4L2 controls, and
preserve the original one for only libcamera Controls to make the
content of an event more specific.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
[Jean-Michel: remove lensControls from the original patch]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When updating the controls the calculation for minCrop incorrectly
indents the parameters to scaledBy().
Fix it.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Provide a constructor for StreamBuffer and use that while populating
Camera3RequestDescriptor::buffers_ vector. Also provide the default
move-constructor (required as StreamBuffer is stored in a vector in
Camera3RequestDescriptor) and destructor for the StreamBuffer struct.
Also declare a default move assignment operator and disable the
copy constructor and move operator explicitly with
LIBCAMERA_DISABLE_COPY().
While at it, initialize pointers members in the StreamBuffer struct
to nullptr, with StreamBuffer::status set to Status::Success by default.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
cros::CameraBufferManager can be nullptr if there is an error in
its creation. Place a null-check guard to check it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPU3 IPA has three events which are handled from the pipeline
handler.
The events are received in the sequence, EventProcessControls,
EventFillParams, and finally EventStatReady, while the code lists these
in a different order.
Update the flow of IPAIPU3::processEvent() to match the expected
sequence of events, to help support the reader in interpreting the flow
of events through the IPA.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The isContiguous debug message is inverted.
Correct the logic.
Reported-by: Roman Stratiienko <roman.o.stratiienko@globallogic.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The aspect ratio calculation divides two integer values then casts to a double.
This might reduce precision when scoring for aspect rato differences.
Fix this by casting the integer to a double before the division.
Reported-by: Coverity CID=361652
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The necessary tuning file and CamHelper is added for the imx519 sensor.
The imx519 is a 16MP rolling shutter sensor. To enable
it, please add
dtoverlay=imx519
to the /boot/config.txt file and reboot the Pi.
Signed-off-by: Lee Jackson <info@arducam.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The unicam driver no longer registers an embedded data node if the sensor does
not provide this stream. Account for this in the pipeline handler match routine
by not assuming it is always present.
Add a warning if Unicam and the CamHelper do not agree on the presense of sensor
embedded data, and disable its usage in these cases.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the recent change to switch to programming the sensor device directly,
the notion of packed vs unpacked modes are not relevent, since that is a
Unicam format construct. Remove any scoring based on packed/unpacked modes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Switch the pipeline handler to use the new Unicam media controller based driver.
With this change, we directly talk to the sensor device driver to set controls
and set/get formats in the pipeline handler.
This change requires the accompanying Raspberry Pi linux kernel change at
https://github.com/raspberrypi/linux/pull/4645. If this kernel change is not
present, the pipeline handler will fail to run with an error message informing
the user to update the kernel build.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sensor flips might change the Bayer order of the requested format. The existing
code would set a sensor format along with the appropriate Unicam and ISP input
formats, but reset the latter two on start() once the flips had been requested.
We can now set the sensor flips just before we set the sensor mode in
configure(), thereby not needing the second pair of format sets in start().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add BayerFormat::toPixelFormat() and BayerFormat::fromPixelFormat() helper
functions to convert between BayerFormat and PixelFormat types.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Minor checkstyle fix]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add BayerFormat conversions for formats::R10 (10-bit unpacked) format.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename the bayerToV4l2 conversion table to bayerToFormat. Update the table to
hold both the PixelFormat and V4L2PixelFormat conversions for a given
BayerFormat. This will allow converting between BayerFormat and PixelFormat
types in a subsequent change.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The unscoped enum BayerFormat::Packing leads to usage of the ambiguous
BayerFormat::None enumerator. Turn the enumeration into a scoped enum to
force usage of BayerFormat::Packing::None, and drop the now redundant
"Packed" suffix for the CSI2 and IPU3 packing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This new formats corresponds to the V4L2 V4L2_PIX_FMT_Y10P format, and is a
CSI2-packed version of the DRM_FORMAT_R10 format.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
These new formats corresponds to the V4L2 V4L2_PIX_FMT_Y10 and
V4L2_PIX_FMT_Y12 formats, and are the little-endian version of the
DRM_FORMAT_R10 and DRM_FORMAT_R12 formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PixelFormat::toString() has two \return statements in its
doxygen documentation.
Remove the redundant one.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2Capability has helpers to interogate the capabilities
of a device.
V4L2VideoDevice::enumPixelformats accesses the raw capabilites to check
if the device is supported by a MediaController device.
Provide a helper, and update the usage.
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In case the maximum exposure received from the sensor is very high, we
can have a very high shutter speed with a small analogue gain, and it
may result in very slow framerate. We are not really supporting it for
the moment, so clamp the shutter speed to an arbitrary value of 60ms.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPAFrameContext uses unnamed structures to group items. Doxygen
doesn't seem to support this properly, documentation isn't properly
generated and warnings are output during compilation. Suppress the
warning with a workaround that still results in incorrect generated
documentation until Doxygen gets fixed.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[JMH: Fix doxygen variable usage]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
While the stop() function does not currently perform any action, it forms
part of the IPA interface and is a public function in the class.
Promote it to a full (but basic) function implementation and begin the
documentation accordingly so that there is an appropriate stub to
perform stop operations if they come up.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Doxygen warns us because the structures are referenced as \struct while
they should be \var. Fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPU3 IPA core is growing with additional documentation. The
ipa_context documentation is stored here, but it pushes the IPU3
documentation and implementation further from the head of the file.
Furthermore, the ipa_context documentation is outside of the ipa::ipu3
namespace and isn't identified correctly by Doxygen.
Move the ipa_context to its own compilation object even though there
isn't any code, but to maintain consistency with our documentation
model.
Correctly re-introduce the documentation into the libcamera::ipa::ipu3
namespace during the move.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The struct RGB and struct AwbStatus are used only by the internal
implementation of the AWB algorithm module.
Move them into the private class declaration.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The AWB AwbStatus structure is contained within the Awb class.
Fix the Doxygen reference so that it can be found.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The ipa_context.h entry incorrectly referenced its file name.
Fix it.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The IPU3 IPA implements the basic 3A using the ImgU ISP.
Provide an overview document to describe its operations, and provide a
block diagram to help visualise how the components are put together to
assist any new developers exploring the code.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The tone mapping algorithm is currently undocumented.
Provide an introduction and overview to the implementation as the class
definition and document how the algorithm operates in the process and
prepare methods.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Let the algorithm perform its initial configuration. Implement
configure() to set a default gamma value and let process do the updates
needed.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The tone mapping algorithm calculates the gamma curve for every frame,
regardless of whether the gamma value has changed or not. This issue is
exasperated as we currently hardcode the gamma to a single value.
Optimise the implementation to only recalculate the look up table when
the gamma setting is changed, and store the gamma setting of the LUT
curve as part of the IPA context.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC class was not documented while developing. Extend that to
reference the origins of the implementation, and improve the
descriptions on how the algorithm operates internally.
While at it, rename the functions which have bad names.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we moved the diagram into the AWB class documentation, reword the
accumulator documentation to make it clear it is not meant to be used
only in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AWB algorithm is based on the Grey world algorithm and uses the
statistics generated by the ImgU for that. Explain how it uses those,
and reference the original algorithm at the same time.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
