summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-08-05libcamera: camera_sensor: Generate a sensor IDNiklas Söderlund
The ID is generated from information in the firmware description of the sensor if available or from module and model information if the sensor is virtual (for example VIMC). Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: v4l2_device: Add method to lookup device pathNiklas Söderlund
Add a method to lookup a V4L2 devices path in sysfs. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: sysfs: Add helper to lookup device firmware node pathNiklas Söderlund
A system's firmware description is recorded differently in sysfs depending if the system uses DT or ACPI. Add a helper to abstract this, allowing users not to care which of the two are used. For DT-based systems, the path is the full name of the DT node that represents the device. For ACPI-based systems, the path is the absolute namespace path to the ACPI object that represents the device. In both cases, the path is guaranteed to be unique and persistent as long as the system firmware is not modified. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: sysfs: Add helper to lookup sysfs path of a character deviceNiklas Söderlund
Add a helper function to lookup the sysfs path of a character device. Store the function in a new libcamera::sysfs namespace as there is not class to host it. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve behaviour when camera mode changesDavid Plowman
Now that we stop the asynchronous thread on a SwitchMode, we would do better to regenerate all the tables if the new camera mode crops in a significantly different way to the old one. A few minor tweaks make sense along with this: * Reset the lambda values when we reset everything. It wouldn't make sense to re-start with the old mode's values. * Use the last recorded colour temperature to generate new tables rather than any default value. * Set the frame "phase" counter to ensure the adaptive procedure will run asap. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Resample luminance tableDavid Plowman
This fixes a bug where the luminance correction table was not being resampled according to the camera mode, in the same way as the colour tables. This could be noticeable if any camera modes crop aggressively. This resampling can be done "up front" in the SwitchMode, as we have only a single fixed luminance table. In order to protect the recalculation of the table from the asynchronous thread (which reads it) I've elected to wait for that thread to go idle (though I doubt it would have mattered much). As a by-product of stopping the thread, it no longer needs its own copy of the camera mode (async_camera_mode_). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve locking in a few placesDavid Plowman
Fix up a few locations where we call notify_one() with the lock held. In particular, restartAsync does not need to be called with the lock held for its entire duration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Camera mode does not need to be atomicDavid Plowman
In the libcamera framework, SwitchMode (which overwrites the camera_mode) cannot run concurrently with Prepare (which uses it). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05android: camera_device: Fix preview templateJacopo Mondi
Add 5 controls to the generate preview template to comply with the camera3 specification. This change fixes CTS 9.0.r12 test: android.hardware.camera2.cts.CameraDeviceTest#testCameraDevicePreviewTemplate Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_device: Break-out request templateJacopo Mondi
Currently the request template returned from CameraDevice::constructDefaultRequestSettings() is the same for all the supported template types. To prepare to adjust the template depending on the use case, break out the template generation to a dedicated function that supports the PREVIEW use case. All the other template types use the requestTemplatePreview() function and just update the capture intent property. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Add method to update an entryJacopo Mondi
Add a method to update an existing metadata tag entry, by wrapping the update_metadata_entry() function provided by the Android metadata library. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05andrdid: camera_device: Store const templatesJacopo Mondi
The request capture templates stored in the CameraDevice::requestTemplates_ should not be modified once created. Store a const pointer to the request templates in the class member map. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Add const version of get()Jacopo Mondi
Add a const version of the CameraMetadata::get() method to retrieve a const pointer to the camera metadata wrapped by the class instance. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05android: camera_metadata: Mark isValid() as constJacopo Mondi
The CameraMetadata::isValid() method does not modify the object state and can be called on const instances of the CameraMetadata class. Mark the method as const to allow that. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05cam: Use the common cleanup function on failureNiklas Söderlund
The different error paths in init() are out of sync. Instead of fixing them switch to using the cleanup() function which does the right thing for all cases. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2020-08-05libcamera: ipu3: Fix compilation issues with gcc5Jacopo Mondi
GCC5 does not provide prototypes for the math library functions defined in the math.h header for the std:: namespace. Include the C++ <cmath> header in place of <math.h> as it defines overloads for the std::abs and std::fmod function. This goes intentionally against the libcamera coding guidelines, and is reported as warning by checkpatch.py. Fixes: 968ab9bad0ed ("libcamera: ipu3: imgu: Calculate ImgU pipe configuration") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03android: camera_device: Report RAW capability if supportedNiklas Söderlund
Probe the libcamera Camera for RAW support and if supported report RAW capability in the static metadata reported to Android. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03android: camera_device: Map HAL RAW to libcamera RAW formatsNiklas Söderlund
Add a mapping from HAL RAW formats to the direct equivalent of libcamera formats. With this change it is possible to capture RAW images as long as the hardware can deliver frames in a format that is native to the HAL. More work is needed to deal with unpacked 8, 10 and 12 RAW formats as they don't directly map to a native HAL format. Nor do they belong in the RAW_OPAQUE category as the content format is generic and not uncommonly supported by hardware. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-03android: camera_device: Prepare for non-mandatory formatsNiklas Söderlund
When probing what formats a libcamera Camera supports we want to allow to probe for non-mandatory formats. Add a new flag to indicate if a format in camera3FormatsMap is mandatory or not. All current defined formats are mandatory. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-03cam: Add --monitor optionUmang Jain
Add --monitor to monitor new hotplug and unplug camera events from the CameraManager. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: stream_option: use format name to set cam/qcam formatKaaira Gupta
Replace hex input for pixel formats with their format names, for input in cam and qcam. Hence, remove the todo. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: pixel_format: Add a function to return format based on stringKaaira Gupta
Add a function which retrieves pixel format corresponding to its name from PixelFormatInfo. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: formats: PixelFormatInfo: Add name lookup functionKaaira Gupta
Add a function which returns PixelFormatInfo, given format name as a string. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: ipu3: imgu: Rename configureInput()Jacopo Mondi
The ImgUDevice::configureInput() function does not only configure the input format but applies rectangles to the IF, BDS and GDC components. Rename it to ImgUDevice::configure(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Configure ImgU with the computed parametersJacopo Mondi
Instrument the ImgUDevice::configureInput() function to use the provided pipe configuration parameters to configure the IF, BDS and GDC rectangles. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Validate the pipe configurationJacopo Mondi
Collect the desired ImgU pipe configuration while assigning streams in the pipeline handler validate() function and ask the ImgUDevice class to calculate the pipe configuration parameters. If the requested pipe configuration results in a non-valid configuration, return an error from the validate() function. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: imgu: Calculate ImgU pipe configurationJacopo Mondi
Instrument the ImgU component to dynamically calculate the image manipulation pipeline intermediate sizes. To correctly configure the ImgU it is necessary to program the IF, BDS and GDC sizes, which are currently fixed to the input frame size. The procedure used to calculate the intermediate sizes has been ported from the pipe_config.py python script, available at: https://github.com/intel/intel-ipu3-pipecfg at revision: 61e83f2f7606 ("Add more information into README") Define two structures (ImgUDevice::Pipe and ImgUDevice::PipeConfig) to allow the pipeline handler to supply and retrieve configuration parameters from the ImgU. Finally, add a new operation to the ImgUDevice that calculates the pipe configuration parameters based on the requested input and output sizes. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove camera_ from IPU3CameraConfigurationJacopo Mondi
The IPU3CameraConfiguration::camera_ shared pointer is not used. Remove it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove streams from IPU3CameraConfigurationJacopo Mondi
The IPU3CameraConfiguration::streams_ field was used to keep an association between the StreamConfiguration and the assigned streams before CameraConfiguration::setStream() was called at configure() time. The stream assignment was based on the order in which elements were inserted in the vector, implementing a fragile association between streams and their intended configurations. As it is now possible to assign streams at validation time, there is no need to keep that association in place, and the streams_ vector is now unused. Remove it and the associated accessor method from the IPU3CameraConfiguration class. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Adjust and assign streams in validate()Jacopo Mondi
Remove the adjustStream() and assignStream() methods, and perform stream adjustment and assignment while iterating the StreamConfiguration items. The adjustStream() implementation had some arbitrary assumption, like the main output having to be as large as the sensor resolution, and did not take into account the different alignment requirements between the main output and the viewfinder output. The assignStream() implementation also assumes only full-size streams can be produced by the main output, and having it as a separate function prevents adjusting streams according to which output they are assigned. Blend the two implementation in a single loop and perform the required stream adjustment and assignment in one go. As streams are now assigned at validate() time, remove the same operation from the configure() function. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: cio2: Add a const sensor() methodJacopo Mondi
Add a const version of the CIO2Device::sensor() method, that retrieves a const pointer to the sensor_ class member, to be called by users which only own a const reference to a CIO2Device class instance. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: camera: Zero streams before validate()Jacopo Mondi
The current implementation of the Camera::configure() method zeroes the stream pointers assigned to the StreamConfiguration items before calling the pipeline handler configure() operation, just after the CameraConfiguration has been validated. This discards the stream assignment performed at pipeline hander validation time, requiring platforms that need to perform that early assignment to maintain the association in place with custom data structures. To allow pipeline handlers to use StreamConfiguration::setStream() at validate() time, zero the stream assignment before calling validate(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Validate the stream combinationJacopo Mondi
The IPU3 pipeline handler supports 2 processed RGB/YUV streams and one RAW stream. Validate that the requested stream combination is supported in the pipeline handler validate() implementation and return an error in case it's not. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove initialization of SizeJacopo Mondi
The Size struct constructor defaults the width and height to 0. Remove the empty braced-list initialization as it is not required. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Report StreamFormatsJacopo Mondi
Report StreamFormats associated to each StreamConfiguration generated by the IPU3 pipeline handler. The StreamFormats are generated differently for RAW and processed streams, with the former using the sensor enumerated resolutions and the latter using a continuous range of sizes constructed by matching the sensor capabilities with the platform constraints. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Do not overwrite StreamConfigurationJacopo Mondi
The validate function overwrites the generated StreamConfiguration with the one reported by the CIO2 unit when inspecting the RAW stream configuration. As we prepare to add StreamFormats to the IPU3 StreamConfiguration, assigning to the CIO2 generated configuration would delete the StreamFormats. Fix this by updating relevant fields only in order to keep the assigned StreamFormats. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: cio2: Report format and sizesJacopo Mondi
Add two methods to the CIO2Device class to retrieve all the supported PixelFormats and sizes. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Make sure the config is validJacopo Mondi
Inspect the return status of validate() in the IPU3 pipeline handler generateConfigurtion() implementation. If the generated configuration is not valid, return a an empty configuration to the application. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Remove streams from generateConfigurationJacopo Mondi
Remove stream assignment from the IPU3 pipeline handler generateConfiguration() implementation. The function aims to provide a suitable default for the requested use cases. Defer stream assignment to validation and only initialize sizes and formats. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: geometry: Add isNull() function to Rectangle classJacopo Mondi
It's common for code to check if a rectangle is null. Add a helper function to do so and test the function in test/geometry.cpp Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: utils: Add alignUp and alignDown functionsJacopo Mondi
Add to libcamera utils library two functions to round up or down a value to an alignment and add a test in test/utils.cpp for the two new functions. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: ipu3: Rename mbusCodesToInfoJacopo Mondi
The mbusCodesToInfo map actually maps media bus codes to PixelFormat instances. Rename the map according to its actual function and while at it drop the 'static' keyword as the map is already defined in an anonymous namespace. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: device_enumerator_udev: Initialize monitor_ and notifier_ to nullptrNiklas Söderlund
The monitor_ and notifier_ pointers are acted on in the destructor if not set to nullptr, the pointers are however first initialized in init() and enumerate(). Avoid acting on uninitialized pointers by initializing them to nullptr in the constructor. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com>
2020-07-31libcamera: camera: Ensure deletion via deleteLater()Umang Jain
Object::deleteLater() ensures that the deletion of the Object takes place in a thread it is bound to. Deleting the Object in a different thread is a violation according to the libcamera threading model. On hot-unplug of a currently streaming camera, the last reference of Camera when dropped from the application thread (for e.g. QCam's thread), the destructor is then called from this thread. This is not allowed by the libcamera threading model. Camera is meant to be deleted in the thread it is bound to - in this case the CameraManager's thread. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-31libcamera: object: Add deleteLater() supportUmang Jain
This commit adds support to schedule the deletion of an Object to the thread it is bound to (similar to [1]). An Object getting destroyed by a different thread is considered as a violation as per the libcamera threading model. This will be useful for an Object where its ownership is shared via shared pointers in different threads. If the thread which drops the last reference of the Object is a different thread, the destructors get called in that particular thread, not the one Object is bound to. Hence, in order to resolve this kind of situation, the creation of shared pointer can be accompanied by a custom deleter which in turns use deleteLater() to ensure the Object is destroyed in its own thread. [1] https://doc.qt.io/qt-5/qobject.html#deleteLater Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-31libcamera: thread: Support selective message dispatch to threadUmang Jain
Extend the current dispatchMessages() to support dispatching of selective messsages according to the Message::Type passed in the function argument. dispatchMessages() can now be called explicitly to force deliver selected type's message to the thread for processing (typically when event loop is not running). Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-31libcamera: properties: Define pixel array propertiesJacopo Mondi
Add definition of pixel array related properties. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Ricardo Ribalda <ricardo@ribalda.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-27qcam: Fix camera reference leak on hot-unplugUmang Jain
If the currently streaming camera is hot-unplugged, a camera reference was still held by MainWindow::camera_, preventing it to be destructed, until qcam window is closed. Plug the leak in the hot-unplug handler itself. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-27libcamera: event_notifier: Fix signature typo setEnabled() in documentationUmang Jain
Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-27libcamera: pipeline: simple: Try next mbus code if setupFormats() failsAndrey Konovalov
Now SimpleCameraData::setupFormats() can fail if the camera sensor supports media bus code which some entities down the pipeline don't. When this happens continue with the next media bus code instead of aborting the enumeration of the possible pipeline configurations. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>