| Age | Commit message (Collapse) | Author |
|---|
|
Ensure that checks on resource availability are handled first, and then
operate on the queues only after the resources are confirmed as
available.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the imguOutputBufferReady() detects a cancelled frame, it is
reporting that the metadata has been processed in order to be able to
complete the cancelled request.
This causes the FrameInfo to be completed and deleted early, but then an
active buffer on the IMGU can complete and be unable to find the
FrameInfo for it to complete correctly.
Do not mark metadataProcessed early on the event that a single buffer is
detected as cancelled. The stopping of the V4L2 devices will ensure
that all queued buffers are returned to us and we can follow the normal
and expected shutdown sequence.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA should be stopped before the hardware devices to ensure that
all asynchronous actions have completed within the IPA before resources
are removed and released.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Building the cam application isn't always desired, for instance in a
production environment that only needs the libcamera library. Add a
meson option to disable it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reduce the indentation in the gstreamer and qcam meson.build with
subdir_done(). This follows similar patterns in cam and v4l2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename ConfigInput to IPAConfig to be more consistent with the naming,
and remove ConfigInput::op, as it is never used.
Replace ConfigOutput with a ControlList type, as that is the only return
type from ipa::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Separate out the in and out parameters in ipa::start() as they are not
the same. This function now takes in a ControlList and returns out a
struct StartConfig which holds a ControlList and drop frame count for
the pipeline handler to action.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The lastMode_ member variable is now unused, so remove it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The controller initialise is a one-off operation, so move it from
ipa::configure() to ipa::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Conditionally open the embedded data node in pipeline_handler::match()
based on whether the ipa::init() result reports if the sensor supports
embedded data or not.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the opening of the CamHelper from ipa::configure() to ipa::init().
This allows the pipeline handler to get the sensor specific parameters
in pipeline_handler::match() where the ipa is initialised.
Having the sensor parameters available earlier will allow selective
use of the embedded data node in a future change.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Pass the sensor model string to the IPA init() method through the
IPASettings structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The correct return value for the HAL for hal_dev_open() when trying to
open a camera that's already opened is EUSERS. Make hal_dev_open()
return -EUSERS, and plumb the logic for this through
CameraHalManager::open().
This allows the following CTS tests to pass:
- android.hardware.camera2.cts.CameraManagerTest#testCameraManagerOpenAllCameras
- android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
There are std::unique_ptr rvalue reference arguments. They are
intended to pass the ownership to the functions. In the case,
it is right to let the argument be std::unique_ptr value and
pass by std::move().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the camera location is not defaulted anymore in the library but
doesn't get registered if the firmware interface does not provide the
information, do not default it to FRONT if LocationExternal is reported.
To maintain compatibility with CTS requirements, default location to
FRONT only if the camera property is not available.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Do not register the Location property if not available from the firmware
interface instead of defaulting it to External.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In preparation to register the Location property only if the firware
interface provides it, do not assume it is available and build the
camera name using the camera sensor model as a fallback.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
After commit 4671911df040 ("pipeline: simple: Use breadth-first search
to setup media pipeline"), the explanation in the SimplePipeline
documentation how the handler tries to find a valid path to capture
device does not reflect the reality anymore. Update the text to the new
situation.
Fixes: 4671911df040 ("pipeline: simple: Use breadth-first search to setup media pipeline")
Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The documentation of the controls() method refers to the methods
ControlList::operator[]() and ControlList::update(), which do not exist.
Instead refer to ControlList::get() and ControlList::set() to achieve a
similar documentation.
Fixes: a8c40942b99e ("libcamera: controls: Improve the API towards applications")
Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPU3 IPA will need the BDS configuration when the AWB/AGC algorithm
will be integrated.
In order to do that, the configure() interface needs to be modified.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPA was configured after all the pipeline devices were started,
including IPA itself.
Move it at the end of configure() call.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the SimplePipeline is setting up its data and media pipeline in the
SimpleCameraData constructor, it merely tries to find the first valid
pad and link to the next entity, starting from the camera sensor.
Following this path may not always lead to a valid capture device and
therefore the setup will fail on some machines. This is for example an
issue when using the SimplePipeline on an i.MX-6Q with its i.MX IPU.
This commit implements a different approach to setup the media-pipeline
by finding the shortest path to a valid capture device, using the
breadth-first search algorithm. On i.MX6Q, the shortest path has a good
chance to be the path from the sensor to the CSI capture device, as
other paths may involve image converters, encoders or other IPU blocks
and will have therefore more nodes.
Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently, when allocating buffers, the streams of the Camera object are
used. Instead the streams of the CameraConfiguration object should be
used. This is because the Camera object holds all available streams
while the CameraConfiguration holds only the streams associated with the
current configuration.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch adds support for the Soho Enterprises SE327M12 module. The
sensor is an imx327 which therefore uses the imx290 kernel driver and
CamHelper.
To use this module and camera tuning, place the following in the
/boot/config.txt file:
dtoverlay=imx290,clock-frequency=37125000
and then the existing imx290.json file must be over-written with
se327m12.json
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the ISP::Output0 stream has not been configured, we must enable it
with a default format and resolution for internal use. This is to allow
the pipeline handler data flow to be consistent, and allow the IPA to
receive statistics for the frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is possible for the application to call pipeline_handler::configure()
multiple times, which would attempt to open the Unicam embedded data
node on every call. This would cause a warning message as the node
would have already been opened. Avoid this by tracking if the node
has previously been opened.
Note that this is a temporary fix since the open call for the Unicam
embedded data node will be moved from pipeline_handler::configure() to
pipeline_handler::match().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Document struct DelayedControls::ControlParams and its associated
fields.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If gst_buffer_pool_acquire_buffer in gst_libcamera_task_run fails, the
unique_ptr to the request-object gets reset and hence, its destructor
is called. However, the wrap-object points to the same object and is
still alive at this moment. When the task_run-function is finished, the
destructor of the wrap-object is called, which in return calls the
destructor of the request-object again.
Instead of taking care of both, the request and the wrap-object, we can
move the request to the wrap which will then effectively take care of
the request object automatically.
Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
There was an off-by-one error in DelayedControls::get() when picking
controls from the queue to return back to the pipeline handler.
This is only noticeable as small oscillations in brightness when closely
viewing frame while AGC is running. The old StaggeredCtrl did not show
this error as the startup queuing mechanism has changed in
DelayedControls.
Fix this by indexing to the correct position in the queue.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reported-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In DelayedControls::applyControls(), the controls queue would be
extended via a no-op control push to fill the intermittent slots with
unchanged control values. This is needed so that we read back unchanged
control values correctly on every frame.
However, there was one additional no-op performed on every frame that is
not required, meaning that any controls queued by the pipeline handler
would have their write delayed by one further frame. The original
StaggeredCtrl did not do this, as it only had one index to manage,
whereas DelayedControls uses two.
Remove this last no-op push so that the pipeline_handler provided
controls would be written on the very next frame if possible. As a
consequence, we must mark the control update as completed within the
DelayedControls::applyControls() loop, otherwise it might get reused
when cycling through the ring buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reported-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On DelayedControls::reset(), the values retrieved from the sensor device
were added to the queues with the updated flag set to true. This would
cause the helper to write out the value to the device again on the first
DelayedControls::applyControls() call. This is unnecessary, as the
controls written are identical to what is stored in the device driver.
Fix this by explicitly setting the update flag to false in
DelayedControls::reset() when adding the controls to the queue.
Additionally, use the Info() constructor when adding items to the queue
for consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an exposure time change adjusts the vblanking limits, and we set both
VBLANK and EXPOSURE controls through the VIDIOC_S_EXT_CTRLS ioctl, the
latter may fail if the value is outside of the limits calculated by the
old VBLANK value. This is a limitation in V4L2 and cannot be fixed by
setting VBLANK before EXPOSURE in a single VIDIOC_S_EXT_CTRLS ioctl.
The workaround here is to have the DelayedControls object mark the
VBLANK control as "priority write", which then write VBLANK separately
from (and ahead of) any other controls. This way, the sensor driver will
update the EXPOSURE control with new limits before the new values is
presented, and will thus be seen as valid.
To support this, a new struct DelayedControls::ControlParams is used in
the constructor to provide the control delay value as well as the
priority write flag.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix up trivial comments, merge conflicts]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We borrowed a GstBuffer from the pool, if preparing the buffer failed,
we need to push it back to avoid leaking it.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Both the DeviceProvider and Device classes had the same mistake,
calling G_OBJECT_GET_CLASS() instead of G_OBJECT_CLASS() when
chaining their finalize call to their base class. This would
crash at destruction, which was causing gst-device-monitor-1.0
tool to crash and application using that API to crash too.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In kernel 5.11 the rkisp1 uapi had changed to support different hardware
revisions. Currently only revision 10 is supported by the rkisp1 IPA and
therefore 'init' should fail if the revision is not 10.
This changes depends on the kernel driver reporting the hardware
revision, and thus requires the rkisp1 driver from v5.11 or newer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA of rkisp1 relies on some of the camera's controls.
Therefore it can't work if those controls are not given.
Return -EINVAL from 'configure' in that case.
Also return error from the pipeline's 'configure' method
if the IPA configure fails.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method 'hwRevision' to return the
info.hw_version reported by the driver.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
According to the EXIF specification, the GPS method should be UNDEFINED,
and the first 8 bytes will designate the type. However, CTS expects the
first 8 bytes to be part of the data. Remove the 8-byte encoding
designator by changing the encoding to NoEncoding to appease CTS.
This is part of the fix that allows the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
There was a copy-paste error that caused the latitude to be set twice and
the longitude never. Fix this.
This is part of the fix that allows the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that setRational() supports setting multiple rational values, use
that in setGPSDateTimestamp and setGPSDMS which previously set every
rational manually.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
setRational was not working properly for EXIF tags in the GPS IFD due to
libexif not supporting those tags in exif_entry_initialize(). Manually
specify the size of the EXIF entry to fix this. While at it, add support
for setting multiple rationals, as that is a common use case for
rational EXIF tags.
As Rational types are no longer initialized by libexif directly, the
EXIF_TAG_{X,Y}_RESOLUTION exif tags will not have their default values
populated.
This allows the GPS altitude to be set properly, and is part of the fix
to allow the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The capture request template for video recording use cases requires
a fixed FPS range. Generate the request templates for the VIDEO_RECORD
and VIDEO_SNAPSHOT capture intents using the preview template and
updating the supported FPS range.
This change fixes the CTS tests
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRecordingTemplate
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera supported FPS range is crucial to distinguish between
capture templates for preview and video recording. If the pipeline
handler did not specify an available FPS range by registering the
controls::FrameDurations property so far the control was simply not
added to the generated capture template.
In order to prepare to generate templates for video recording which
require a fixed FPS range, fail earlier in generating any template at
all if the available FPS range is not provided by the Camera.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current implementation of constructDefaultRequestSettings()
returns the same capture template for all the capture intent.
As the correctness of the generated template is verified by CTS it
is better to return an error for unsupported capture use cases.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The result metadata reports an arbitrary {30, 30} FPS range for the
AE algorithm.
The actual FPS range should be returned in the Request::metadata, but
as libcamera currently does not support that feature temporarily work
around the issue and return the FPS range requested by the camera
framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The request template returned by requestTemplatePreview() uses an
arbitrary {15, 30} Auto-Exposure algorithm FPS range. Use the one
calculated at static metadata creation time, which is consistent with
the camera limits.
Once template generation will be performed inspecting the requested
capture intent, the FPS range over which the AE algorithm can range
shall be tuned accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the FrameDuration control reported by pipeline handlers to register
the Auto-Exposure routine FPS range, the minimum stream frame durations
and the sensor maximum frame duration.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the FrameDurations control in the IPU3 pipeline handler
computed using the vertical blanking limits and the sensor
pixel rate as parameters.
The FrameDurations control limits should be updated everytime a new
configuration is applied to the sensor.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The controls' limits initialized by the IPU3 pipeline handler depend
on the sensor configuration. In order to compute controls using a known
state apply to the sensor a configuration equal to its own resolution.
Move the \todo note regarding the controls' limits dependency on the
sensor configuration at the beginning of the function and remove the
other redundant ones in the function body.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that we support returning int directly in addition to other output
parameters, improve the configure() function in the raspberrypi IPA
interface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
