summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-26libcamera: ipu3: cio2: Add function to generate configurationNiklas Söderlund
Collect the code used to generate configurations for the CIO2 block in the CIO2Device class. This allows simplifying the code and allow further changes to only happen at one code location. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-26libcamera: ipu3: cio2: Consolidate information about formatsNiklas Söderlund
Instead of spreading the mapping between media bus codes and V4L2 FourCC all over the CIO2 code collect it in a single map and extract the data from it. This is done in preparation of adding PixelFormat information to the mix. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-26libcamera: ipu3: cio2: Move the CIO2Device class to separate filesNiklas Söderlund
In preparation of refactoring the IPU3 pipeline handler breakout the CIO2Device into its own .cpp and .h file, no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-26libcamera: ipu3: Calculate number of buffers for ImgUNiklas Söderlund
Decouple the number of buffers to allocate for the ImgU from the number of buffers allocated for the CIO2. Instead of blindly following the CIO2 pick the maximum number of buffers requested for any stream facing applications. This is potentially wasteful, as each stream could allocate just as many buffers as requested by the application instead of the maximum from the set. But this is not more wasteful than what is already used by the pipeline and should be fixed on top after the decoupling of the two processing units. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-26libcamera: ipu3: Breakout stream assignment to new functionNiklas Söderlund
Selecting which stream is the most suitable for the requested configuration is mixed with adjusting the requested format when validating configurations. This is hard to read and got worse when support for Bayer formats was added. Break it out to a separate function. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-26libcamera: ipu3: Fold mediaBusToFormat() into only callerNiklas Söderlund
Make the code easier to read and refactor. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-26libcamera: pipeline_handler: Correct small typo in acquireMediaDevice ↵Chris Chinchilla
description Correct a small typo in the method description. Fixes: d6a88607479 ("libcamera: pipeline_handler: Keep track of MediaDevice") Signed-off-by: Chris Chinchilla <chris@gregariousmammal.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-26libcamera: pipeline_handler: Fix incorrect method in CameraData docsChris Chinchilla
The pipeline handler documentation incorrectly references an old API usage of setCameraData, which should have been updated to registerCamera() while updating pipeline handlers to ensure they all have a pipeline-specific "CameraData" allocation. Update the remaining documentation reference. Fixes: b581b9576abd ("libcamera: pipeline_handler: Make pipeline-specific data mandatory") Signed-off-by: Chris Chinchilla <chris@gregariousmammal.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-25libcamera: pipeline: raspberrypi: Add StreamFormats to StreamConfigurationNaushir Patuck
In generateConfiguration(), add the device node specific formats to the StreamConfiguration for each StreamRole requested. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25ipa: rpi: Add "focus" algorithmDavid Plowman
Adds FocusStatus to the image metadata, containing contrast measurements across the image. Optionally also prints a contrast measure to the console, to aid in manual adjustment of the lens. Note that it is not an actual auto-focus algorithm that can drive a lens! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Serialize accesses to the proxyPaul Elder
Make the V4L2 compatibility layer thread-safe by serializing accesses to the V4L2CameraProxy with a lock. Release the lock when blocking for dqbuf. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Fix buffer flags related to queueingPaul Elder
Fix buffer flags related to queueing and dequeueing: - don't allow a buffer with the same index that is already in the queue to be enqueued again - don't clear the done flag upon qbuf - do clear the done flag upon dqbuf - set the flags in V4L2CameraProxy's internal buffers, and not just in the buffers returned from qbuf Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Don't allow buffers to be freed if still mmapedPaul Elder
In VIDIOC_REQBUFS with count = 0, if the buffers are still mmaped, they should not be allowed to be freed. Add a check for this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Don't allow streamon if no buffers have been requestedPaul Elder
Make VIDIOC_STREAMON return -EINVAL if no buffers have been allocated with reqbufs. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Check arg->index bounds for querybuf, qbuf, dqbufPaul Elder
There were no bounds checks for the index argument for VIDIOC_QUERYBUF, VIDIOC_QBUF, and VIDIOC_DQBUF. Add them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera: Clear pending requests on freeBuffers and streamOffPaul Elder
V4L2 allows buffer queueing before streamon while libcamera does not. The compatibility layer thus saves these buffers in a pending queue until streamon, and then automatically queues them. However, this pending queue is not cleared when the buffers are freed, so the following sequence of actions will cause a use-after-free: 1. queue buffers 2. free buffers - buffers from 1. stay in pending queue but have been freed 3. queue buffers 4. streamon - buffers from 1. are enqueued, then the buffers from 3. are enqueued. Use-after-free segfault when libcamera tries to handle the enqueued buffers from 1. Fix this by clearing the pending request queue upon buffers being freed. Also clear the pending request queue on streamOff, for correctness. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera: Don't use libcamera::Semaphore for available buffersPaul Elder
In V4L2, a blocked dqbuf should not not also block a streamoff. This means that on streamoff, the blocked dqbuf must return (with error). We cannot do this with the libcamera semaphore, so pull out the necessary components of a semaphore, and put them into V4L2Camera, so that dqbuf from V4L2CameraProxy can wait on a disjunct condition of the availability of the semaphore or the stopping of the stream. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Clear internal buffer vector on reqbufs 0Paul Elder
If VIDIOC_REQBUFS with count = 0 is called when the stream is not on, clear the proxy's internal vector of buffer. If the stream is on when reqbufs 0 is called, return -EBUSY. Note that this is contrary to what the V4L2 docs say (reqbufs 0 when streaming should also streamoff), but it is how the V4L2 implementation works. v4l2-compliance doesn't seem to care either way, however, so we cater to the implementation, and no longer call streamoff on reqbufs 0. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: noop if streamon when stream is already onPaul Elder
If VIDIOC_STREMAON is called when the stream is already on, do a noop. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Disallow dqbuf when not streamingPaul Elder
Make VIDIOC_DQBUF return -EINVAL if the stream is not turned on. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera: Add isRunning()Paul Elder
Add a method isRunning() to V4L2Camera so that V4L2CameraProxy can use it for checks. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Implement VIDIOC_ENUM_FRAMESIZESPaul Elder
Implement VIDIOC_ENUM_FRAMESIZES in the V4L2 compatibility layer. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Implement VIDIOC_ENUMINPUT, VIDIOC_G/S_INPUTPaul Elder
Implement VIDIOC_ENUMINPUT, VIDIOC_G_INPUT, and VIDIOC_S_INPUT. Only the zeroth input device is supported, and the info returned by enuminput is hardcoded and basic. This is sufficient to pass v4l2-compliance. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Implement VIDIOC_G/S_PRIORITYPaul Elder
Implement VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY. The behaviour documented in the V4L2 specification doesn't match the implementation in the Linux kernel, implement the latter. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Fix v4l2-compliance support for extended formatsPaul Elder
Fix the following v4l2-compliance error: fail: v4l2-compliance.cpp(652): !(caps & V4L2_CAP_EXT_PIX_FORMAT) Simply add V4L2_CAP_EXT_PIX_FORMAT to capabilities in querycap. In addition, populate the necessary fields in struct v4l2_pix_format to support extended pixel formats in try_fmt and g/s_fmt, and clear the reserved field for enum_fmt. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Check for null arg values in main ioctl handlerPaul Elder
The ioctl handlers currently don't check if arg is null, so if it ever is, it will cause a segfault. Check that arg is null and return -EFAULT in the main vidioc ioctl handler. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Set timestamp monotonic buffer flag on reqbufsPaul Elder
Set buffer flag V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC at VIDIOC_REQBUFS after the buffers have been allocated. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Clear reserved field in reqbufsPaul Elder
Clear the reserved field in arg struct v4l2_reqbuffers of VIDIOC_REQBUFS. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_proxy: Free old buffers on reqbufs > 0Paul Elder
Free buffers, if any were previously allocated, at VIDIOC_REQBUFS with count > 0. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_compat: Support multiple openPaul Elder
Previously, since we acquired the libcamera camera upon open(), it was impossible to support multiple open, as any subsequent opens would return error because the camera would already be acquired. To fix this, we first initialize the camera in the first call to V4L2CameraProxy::open(), just to heat up the stream format cache. We then add ownership by a V4L2CameraFile of a V4L2Camera via the V4L2CameraProxy. All vidioc ioctls prior to reqbufs > 0 (except for s_fmt) are able to access the camera without ownership. A call to reqbufs > 0 (and s_fmt) will take ownership, and the ownership will be released at reqbufs = 0. While ownership is assigned, the eventfd that should be signaled (and cleared) by V4L2Camera and V4L2CameraProxy is set to the V4L2CameraFile that has ownership, and is cleared when the ownership is released. In case close() is called without a reqbufs = 0 first, the ownership is also released on close(). We also use the V4L2CameraFile to contain all the information specific to an open instance of the file. This removes the need to keep track of such information within V4L2CameraProxy via multiple maps from int fd to info. Since V4L2 does not expect reqbufs 0 to ever return error, make V4L2CameraProxy::freeBuffers() return void. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: V4L2CameraProxy: Take V4L2CameraFile as argument for intercepted callsPaul Elder
Prepare for using the V4L2CameraFile as a container for file-specific information in the V4L2 compatibility layer by making it a required argument for all V4L2CameraProxy calls that are directed from V4L2CompatManager, which are intercepted via LD_PRELOAD. Change V4L2CameraFile accordingly. Also change V4L2CompatManager accordingly. Instead of keeping a map of file descriptors to V4L2CameraProxy instances, we keep a map of V4L2CameraFile instances to V4L2CameraProxy instances. When the proxy methods are called, feed the file as a parameter. The dup function is also modified, in that it is removed from V4L2CameraProxy, and is handled completely in V4L2CompatManager, as a map from file descriptors to V4L2CameraFile instances. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25v4l2: v4l2_camera_file: Add V4L2CameraFile to model the opened camera filePaul Elder
With relation to opening files, the kernel has three objects related to files: - inodes, that represent files on disk - file objects, that are allocated at open() time and store all data related to the open file - file descriptors, that are integers that map to a file In the V4L2 compatibility layer, V4L2CameraProxy, which wraps a single libcamera camera via V4L2Camera, is more or less equivalent to the inode. We also already have file descriptors (that are really eventfds) that mirror the file descriptors. Here we create a V4L2CameraFile to model the file objects, to contain information related to the open file, namely if the file has been opened as non-blocking, and the V4L2 priority (to support VIDIOC_G/S_PRIORITY later on). This new class allows us to more cleanly support multiple open later on, since we can move out of V4L2CameraProxy the handling of mapping the fd to the open file information. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Plumb in the libcamera sharpness controlDavid Plowman
This simply wires up the libcamera sharpness control in the Raspberry Pi IPAs so that it controls the strength of the Raspberry Pi sharpness control algorithm. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Add sharpness strength controlDavid Plowman
The sharpness control is, loosely speaking, a gain applied to the amount of sharpening added to an image. We also report the sharpness setting used back to the caller in metadata. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Make sharpening mode_factor an ordinary doubleDavid Plowman
No need for it to be std::atomic as SwitchMode runs synchronously with Prepare. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: Add a sharpness strength controlDavid Plowman
The control is a single float value with minimum, default and maximum values. Please read the description for more details. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: pixel_format: Replace hex with format namesKaaira Gupta
Print format names defined in formats namespace instead of the hex values in toString() as they are easier to comprehend. For this add a property of 'name' in PixelFormatInfo' so as to map the formats with their names. Print fourcc for formats which are not used in libcamera. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-24libcamera: formats: Add formats for IPU3Niklas Söderlund
When replacing DRM FourCCs with libcamera formats IPU3 format descriptors where missing resulting in RAW capture not being possible. Fix this by adding the missing descriptors. Fixes: 56c99424edd64c5a ("libcamera: pipeline: Replace explicit DRM FourCCs with libcamera formats") Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-24meson: options: Add an option to control compilation of qcamNiklas Söderlund
Add an option to control compilation of the qcam test application. The default behavior is to compile qcam, no change in behavior without user intervention. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-23libcamera: Add support for planar YUV422 and YUV420 formatsDavid Plowman
These formats can be helpful when downstream applications or libraries support them natively (avoiding a costly conversion). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-22libcamera: ipu3: Remove id from camera namesNiklas Söderlund
The id in the camera name is confusing and is of little use for users. Camera names are not (yet) required to be unique and appending which numerical CIO2 unit the sensor is attached to is just as good as depending on the i2c bus information already present in the entity name. Before this change, $ cam -l Available cameras: 1: ov13858 2-0010 0 2: ov5670 4-0036 1 After this change, $ cam -l Available cameras: 1: ov13858 2-0010 2: ov5670 4-0036 Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: stream: Initialize stride and bufferCountNiklas Söderlund
The two public unsigned integer fields of StreamConfiguration, stride and bufferCount where not initialized, fix this to match other members being initialized to their 'zero' state. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Recalculate camera exposure/gain when camera ↵David Plowman
mode changes This commit causes the AGC to recalculate its camera exposure/gain values when the camera mode changes. For example it's possible that the exposure profile could be changed by the application so the division between exposure time and analogue gain may be different. The other underlying reason (and which this commit accomplishes too) is that the sensor's line timing may change in a new mode, and because V4L2 drivers store a number of exposure _lines_, the resulting _time_ will "change under our feet". So we have to go through the process of recalculating the correct number of lines and writing this back to the sensor with every mode switch, regardless of anything else. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Allow SwitchMode method to return camera settingsDavid Plowman
This commit adds a Metadata parameter to the SwitchMode method enabling it to return camera and other settings to the caller (usually the configure method, just after the camera mode has been selected). In future this will allow the Raspberry Pi IPAs to take those settings (such as exposure and analogue gain) and program them directly into the camera or ISP before the camera is even started. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-19v4l2: v4l2_compat: Intercept open64, openat64, and mmap64Paul Elder
Some applications (eg. Firefox, Google Chrome, Skype) use open64, openat64, and mmap64 instead of their non-64 versions that we currently intercept. Intercept these calls as well. _LARGEFILE64_SOURCE needs to be set so that the 64-bit symbols are available and not synonymous to the non-64-bit versions on 64-bit systems. Also, since we set _FILE_OFFSET_BITS to 32 to force the various open and mmap symbols that we export to not be the 64-bit versions, our dlsym to get the original open and mmap calls will not automatically be converted to their 64-bit versions. Since we intercept both 32-bit and 64-bit versions of open and mmap, we should be using the 64-bit version to service both. Fetch the 64-bit versions of openat and mmap directly. musl defines the 64-bit symbols as macros that are equivalent to the non-64-bit symbols, so we put compile guards that check if the 64-bit symbols are defined. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Compile with musl Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-18libcamera: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18libcamera: pipeline: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. The IPU3 pipeline handler still uses DRM FourCCs for IPU3-specific formats that are not defined in the libcamera public API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18v4l2: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18qcam: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18gst: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>