| Age | Commit message (Collapse) | Author |
|---|
|
Several structures are forward-declarated as classes. Fix this by using
the struct keyword where appropriate, or removing the forward
declaration when not needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
issetugid()
When secure_getenv() is not available, need to have a workaround.
Check if secure_getenv() is present, otherwise call issetugid() on its
place.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: include stdlib.h]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The viewfinder and main output require identical logic for buffer and
request completion. Connect the viewfinder bufferReady signal to the slot
and handle requests for both main output and viewfinder there.
Update the slot logic to complete the request only when the last buffer
has completed, and make sure to complete requests in the same order they
have been queued to the pipeline handler.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for queueing requests for multiple streams in the IPU3
pipeline handler class.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Perform allocation and setup of memory sharing between the CIO2 output
and the ImgU input and allocate memory for each active stream.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use and inspect the stream roles provided by the application to
streamConfiguration() to assign streams to their intended roles and
return a default configuration associated with them.
Support a limited number of usages, with the viewfinder stream able to
capture both continuous video streams and still images, and the main
output stream supporting still images only. This is an artificial
limitation until we figure out the exact capabilities of the hardware.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Sub-class the Stream class with an IPU3-specific implementation and
create each IPU3 camera with two streams: 'output' and 'viewfinder'
which represent the video streams from main and secondary ImgU output
respectively.
Rework stream configuration to handle the two video streams 'output'
and 'viewfinder' separately.
As the IPU3 driver requires viewfinder and stat video nodes to be
started not to stall ImgU processing, configure 'output', 'viewfinder'
and 'stat' regardless of the user-requested active streams.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When logging the camera configuration, the same ostringstream instance
is used to assemble a message describing configuration of all the
configured streams.
After the first stream configuration has been assembled, the use of
std::hex modifies the ostringstream basefield, causing all successive
integers values inserted in the stream to be expressed as hexadecimals.
Fix that by resetting the stream's basefield to decimal, before
assembling a stream configuration description.
Before this patch:
INFO Camera camera.cpp:615 (0) 640x480-0x3231564e (1) 140xa0-0x3231564e
After this patch:
INFO Camera camera.cpp:616 (0) 640x480-0x3231564e (1) 320x160-0x3231564e
Fixes: 9c9078133216 ("libcamera: camera: Log requested configuration in configureStreams()")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Since commit: 4e1dc9004fca ("libcamera: stream: Make Stream inheritable")
the private members of the Stream class have been turned into protected,
to allows subclasses to access them.
As Doxygen generates documentation for protected members (but not for
private memebers), add documentation to the stream class for the
'bufferMap_' and 'configuration_' members.
Fixes: 4e1dc9004fca ("libcamera: stream: Make Stream inheritable")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Include the header file corresponding to the source file in the very
first position. This complies with the Google C++ coding style
guideliens, and helps ensuring that the headers are self-contained.
Three bugs are already caught by this change (missing includes or
forward declarations) in device_enumerator.h, event_dispatcher_poll.h
and pipeline_handler.h. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a toString() method to the StreamConfiguration class, and replace
all manually coded implementations through the source code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the pixel format requested by the application in the
RkISP1PipelineHandler::configureStreams() method instead of hardcoding
NV12. The streamsConfiguration() method still proposes NV12 by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The documentation style for the Doxygen comment blocks is inconsistent
in the library. Document the expectations and update all existing
comment blocks to match.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The pipeline handler for the Rockchip ISP creates one camera instance
per detected raw Bayer CSI-2 sensor. Parallel sensors and YUV sensors
are not supported yet.
As the ISP has a single CSI-2 receiver, only one camera can be used at a
time. Mutual exclusion isn't implemented yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the manual handling of sensor formats with usage of the new
CameraSensor class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraSensor class abstracts camera sensors and provides helper
functions to ease interactions with them. It is currently limited to
sensors that expose a single subdev, and offer the same frame sizes for
all media bus codes, but will be extended to support more complex
sensors as the needs arise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a method to retrieve the media entity associated with a subdevice.
The entityName() and deviceNode() methods are not needed anymore as they
can be accessed through the media entity, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make sure the subdevice file descriptor isn't leaked by closing it when
the V4L2Subdevice instance is destroyed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The new set_overlap() function counts the number of overlapping elements
in the intersection of two sorted ranges defined by their beginning and
ending iterators.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add equality and inequality comparison operators for the Rectangle, Size
and SizeRange classes.
For the Size class, also add ordering operators. Sizes are first
compared on combined width and height, then on area, and finally on
width only to achieve a stable ordering.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of storing four integers for the minimum and maximum width and
height in the SizeRange class, use two instance of the Size class for
the minimum and maximum sizes.
While it at replace the mention of image size with size in the SizeRange
documentation, as the Size class isn't limited to image sizes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Move the Size class before the SizeRange class. No functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3 pipeline handler logs the requested configuration in its
configureStreams() handler. This is useful for other pipeline handlers
as well, move it to the Camera class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The methods don't modify the object instance, mark them as const. This
allows using the LOG() macro from a const method of a Loggable object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The cam and qcam utilities are meant to be shipped with libcamera,
install them by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add to the Buffer class methods to set and retrieve a reference to the
Request instance the buffer is part of.
As buffers outlive the Request they are associated with, the reference
is only temporary valid during the buffer completion interval (from when
the buffer gets queued to Camera for processing, until it gets marked as
completed).
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add to the Request class a method to access the map of Stream to Buffer.
With the introduction of multiple stream support, pipeline handler
should be able to access the map of streams at request queueing time.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Extend the Request::prepare() operation to validate the request before
preparing it. Return an error if the request is invalid, which for now
is limited to ensuring that the request contains at least one buffer.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add method to verify if a request has pending buffers yet to be
completed.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The error code returned by requestBuffers(0) was not propagated to the
caller. Fix it.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Do not assume the freeBuffer() function can handle allocateBuffer()
method failures, as error handling and clean up should be performed
by allocateBuffer() method itself.
Perform clean-up on allocations failures in the IPU3 pipeline handler,
now that freeBuffers() is not called anymore.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pipeline handlers might need to perform allocation of internal buffers,
setup operations, or simple sanity check before going into the
per-stream buffer allocation.
As of now, PipelineHandler::allocateBuffers() is called once for each
active stream, leaving no space for stream-independent configuration.
Change this by providing to the pipeline handlers the full set of active
streams, and ask them to loop over them to perform per-streams
memory allocations and freeing.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When switching to stream usages in the PipelineHandler StreamUsage was
was not forward declared as it should and was hid by other include
files, fix this.
Fixes: 20a6455e0b62575b ("libcamera: camera: Add support for stream usages")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera API and the cam tool are now ready to make use of cameras
with more than one stream. Remove the limitation in the tool which
disallows cameras that provide more than one stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The completion handler needs to handle all buffers in the request. Solve
this by iterating over all buffers in the completed request. The streams
are named automatically streamX, where X is the order in which the
stream was passed to configureStream().
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the cam tool to allow configuring more than one stream. Add an
optional parameter to the --stream option to specify a usage role for
the stream. The stream role is passed to libcamera to give it control
over which streams to use.
To support multiple streams, creation of requests needs to be reworked
to limit the number of requests to match the stream with the least
number of buffers. This should be improved in the future as the tool and
the library evolve.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To be able to write multiple buffers captured in the same request (and
hence having the same sequence number) the buffer writer needs to name
each file uniquely. Add a stream name to the writer function which the
buffer writer can add to the part of the pattern it already expands to
the sequence number. As cam only supports one stream, hard code the name
to stream0.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
More than format information needs to be supplied for each stream to
allow multiple streams to be configured. Rename the option and adapt all
usages of it. There is no functional change except the rename.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the camera configuration thru out the library, tests, cam and
qcam tools.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To properly support both multiple streams and stream usages the library
must provide a method to map the stream usages to the returned streams
configurations. Add a camera configuration object to handle this
mapping.
Applications can iterate over the returned camera configuration to
retrieve the streams selected by the library in the same order as the
usages it provided to the library.
Applications can use the operator[] to retrieve the stream pointer and
the stream configuration. Using a numerical index retrieves the stream
pointer, the numerical indexes corresponds to the insertion order of
usages in the CameraConfiguration, using the stream pointer retrieves
the stream's configuration.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of requesting the default configuration for a set of streams
where the application has to figure out which streams provided by the
camera is best suited for its intended usage, have the library figure
this out by using stream usages.
The application asks the library for a list of streams and a suggested
default configuration for them by supplying a list of stream usages.
Once the list is retrieved the application can fine-tune the returned
configuration and then try to apply it to the camera.
Currently no pipeline handler is prepared to handle stream usages but
nor did it make use of the list of Stream IDs which was the previous
interface. The main reason for this is that all cameras currently only
provide one stream each. This will still be the case but the API will be
prepared to expand both pipeline handlers and applications to support
streams usages.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation of reworking how a default configuration is retrieved
from a camera add stream usages. The usages will be used by applications
to describe how they intend to use a camera and replace the Stream IDs
when retrieving default configuration from the camera using
streamConfiguration().
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Make the geometry header public so it can be used by the API facing
applications.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation of reworking how a default configuration is retrieved
from a camera separate preparation of stream configuration and
application into two different functions. Reason for this is that
preparation of camera configuration will become more complex.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Meson searches for qmake to determine if QT5 is available to support the
optional qcam component.
When cross compiling, meson can incorrectly identify the host qmake
which will cause incorrect linkage and usage of system headers.
Set the dependency method to specify pkg-config which resolves the
issue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Ensure that any error from the disableLinks() call during match() is
propogated to the caller.
Fixes: d698ed27494a ("libcamera: ipu3: Create ImgUDevice class")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the lengthy comment reports, link enable/disable is not trivial, as
links in one ImgU instance interfere with capture operations in the
other one. As it is not yet clear if this behaviour is intended, as of
now reset the media graph during pipeline's match() and enable the
required links at streamConfiguration time.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
As the procedure to configure the intermediate sizes and the alignement
requirements of the ImgU device have not been clarified yet, return as
default configuration the (2560x1920) resolution that has been validated
for both cameras.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the cached sensor maximum resolution and the pixel format
generated by the ImgU output devices as default stream configuration.
While at it, replace the hardcoded numerical value for the number of
buffers with a named constexpr.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
