summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-03-29libcamera: pipeline: ipu3: frames: Use the request sequenceKieran Bingham
For all frame indexes, use the same sequence number as generated by the Request object. This allows clear matching of what operations occurred to which request. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: camera: Extend with a Stopping stateKieran Bingham
When the camera is being stop()ped, active requests will complete. These may trigger an application to re-queue those requests to the camera but that is not permitted, and is an error in the application. Extend the camera state to include a stopping state which is entered as soon as a call to stop() is made. At this point, any request queued will be rejected with a warning, while any pending requests are either successfully completed or cancelled. When the pipeline handler has finished stopping, the camera state will transition to the CameraConfigured state where it can begin to accept requests again, and be restarted. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: camera: Report function which fails access controlKieran Bingham
The camera object has a state machine to ensure calls are only made when in the correct state. It isn't easy to identify where things happen when assertions fail so add extra information to make this clearer. The error level of the isAccessAllowed is raised from Debug to Error as this is important information for applications to know if they have made a request in an invalid state. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: camera: Validate requests are completed in Running stateKieran Bingham
All requests must have completed before the Camera has fully stopped. Requests completing when the camera is not running represent an internal pipeline handler bug. Trap this event with a fatal error. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: request: Add a toString()Kieran Bingham
Provide a toString helper to assist in printing Request state for debug and logging contexts. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: request: Provide a sequence numberKieran Bingham
Provide a sequence number on Requests which are added by the pipeline handler. Each pipeline handler keeps a requestSequence per CameraData and increments everytime a request is queued on that camera. The sequence number is associated with the Request and can be utilised for assisting with debugging, and printing the queueing sequence of in flight requests. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: buffer: Break friendship with RequestKieran Bingham
The FrameBuffer class is only friends with Request so that the request can be associated with the buffers. FrameBuffer already has a helper to setRequest(), so let's use that directly instead. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29utils: ipc: proxy: Track IPA with a state machineKieran Bingham
Asynchronous tasks can only be submitted while the IPA is running. Further more, the shutdown sequence can not be tracked with a simple running flag. We can also be in the state 'Stopping' where we have not yet completed all events, but we must not commence anything new. Refactor the running_ boolean into a stateful enum to track this. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-29libcamera: pipeline: ipu3: Fix typosLaurent Pinchart
Fix two simple typos. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-03-28pipeline: uvcvideo: Avoid reference to temporary objectKhem Raj
A range-based for loop whose range expression is an array of char pointers and range variable declaration is a const reference to a std::string creates a temporary string from the char pointer and binds the range variable reference to it. This creates a const reference to a temporary, which is valid in C++, and extends the lifetime of the temporary to the lifetime of the reference. However, lifetime extension in range-based for loops is considered as a sign of a potential issue, as a temporary is created for every iteration, which can be costly, and the usage of a reference in the range declaration doesn't make it obvious that the code isn't simply binding a reference to an existing object. gcc 11, with the -Wrange-loop-construct option, flags this: uvcvideo.cpp:432:33: error: loop variable 'name' of type 'const string&' {aka 'const std::__cxx11::basic_string<cha r>&'} binds to a temporary constructed from type 'const char* const' [-Werror=range-loop-construct] | 432 | for (const std::string &name : { "idVendor", "idProduct" }) { | | ^~~~ To please the compiler, make the range variable a const char *. This may bring a tiny performance improvement, as the name is only used once, in a location where the compiler can use operator+(const std::string &, const char *) instead of operator+(const std::string &, const std::string &) Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Use a const char * type instead of auto, and update the commit message accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28pipeline: raspberryPi: Fix typo in commentSebastian Fricke
s/Will need to/We'll need to/ Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28ipa: raspberrrypi: Remove duplicate commentSebastian Fricke
The exact same comment is used two times within 5 lines. Remove one of them as it is redundant. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28meson: Summarize which applications and adaptation layers are builtLaurent Pinchart
Add the application and adaptation layers being built to the meson summary. The summary now prints libcamera 0.0.0 Configuration Enabled pipelines: ipu3 raspberrypi rkisp1 simple uvcvideo vimc Android support: True GStreamer support: True V4L2 emulation support: True cam application: True qcam application: True Unit tests: True Subprojects libyuv: YES Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-03-27ipa: rkisp1: Do not set controls during configureSebastian Fricke
Do not send events back to the pipeline handler, while the IPA thread has not been started. If information needs to be returned from configure it should be returned directly. Move the initial call to setControls() out of configure() and into the start() method which is called after the IPA running_ state is updated. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-25libcamera: camera_manager: Document the CameraManager destructorLaurent Pinchart
The destructor stops the camera manager if it is running. This is at the moment an implementation detail, but makes sense to guarantee in the API. Document it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-03-25android: meson: Remove unneeded android_enabled checkLaurent Pinchart
We return early with subdir_done() if android_enabled is false. There's no need to check the variable later in the file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-25android: CameraDevice: Mark getResultMetadata() const functionHirokazu Honda
CameraDevice::getResultMetadata() doesn't change either |descriptor| and member variables. It should be marked as a const function and |descriptor| should be passed with const lvalue reference. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Manage requestTemplates_ with std::unique_ptrHirokazu Honda
CameraMetadata stored in requestTemplates_ in CameraDevice is not necessary to be a raw pointer. This reduces the manual new/delete code by changing the type to std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Manage staticMetadata_ with std::unique_ptrHirokazu Honda
staticMetadata_ in CameraDevice is not necessary to be a raw pointer. This reduces the manual new/delete code by changing the type to std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: Camera3RequestDescriptor: Manage buffers with std::vectorHirokazu Honda
Camera3RequestDescriptor has a length and an allocated buffer for camera_stream_buffer_t array. This replaces the variables with std::vector. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Return const shared_ptr& by camera()Hirokazu Honda
CameraDevice::camera() originally returns shared_ptr. It is mandatory to make a copy by calling camera() in this way. There is no need of copying if a caller needs the reference of the camera like const shared_ptr<Camera> &cam = camera(). That is, it is a caller that copying is required. This changes the return type of camera() to const shared_ptr&, so that we are able to reduce one redundant copy in the above case. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraDevice: Take shared_ptr in constructorHirokazu Honda
CameraDevice takes the ownership of Camera. Therefore, shared_ptr would rather be used than const shared_ptr&. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraHalManager: Fix a function call of a moved CameraHirokazu Honda
libcamera::Camera::id() is called after std::move() in cameraAdded(). This fixes the issue by not executing std::move(). Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraHalManager: Hold CameraManager with std::unique_ptrHirokazu Honda
CameraManager is owned by CameraHalManager. The ownership of the object is not shared with other classes. So CameraHalManager should manage CameraManager with std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-25android: CameraHalManager: Hold CameraDevice with std::unique_ptrHirokazu Honda
CameraDevice is owned by CameraHalManager. The ownership of the object is not shared with other classes. So CameraHalManager should manage CameraDevice with std::unique_ptr. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-24libcamera: v4l2_videodevice: Prevent queueing buffers without a cacheKieran Bingham
The V4l2 buffer cache allows us to map incoming buffers to an instance of the V4L2 buffer required to actually queue. If the cache_ is not available, then the buffers required to allow queuing to a device have been released, and this indicates an issue at the pipeline handler. This could be a common mistake, as it could happen if a pipeline handler always requeues buffers to the device after they complete, without checking if they are cancelled. Catch any invalid queueing of buffers to the V4L2 video device when resources have been released by adding a Fatal log message to highlight the error during development. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24ipa: ipu3: Do not set controls during configureKieran Bingham
The configure operation is synchronous and should not send events back to the pipeline handler. If information needs to be returned from configure it should be handled through the interface directly. Move the initial call to setControls() out of configure() and into the start() method which is called after the IPA running_ state is updated. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24libcamera: pipeline: ipu3: frames: Associate buffers with the requestKieran Bingham
Ensure that the buffers are associated with the request even if they are used internally to be able to correctly map back to the resources they are being used to fulfil. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24libcamera: pipeline: ipu3: frames: Group FrameBuffer operationsKieran Bingham
Ensure that checks on resource availability are handled first, and then operate on the queues only after the resources are confirmed as available. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24libcamera: pipeline: ipu3: Do not mark metadata complete earlyKieran Bingham
When the imguOutputBufferReady() detects a cancelled frame, it is reporting that the metadata has been processed in order to be able to complete the cancelled request. This causes the FrameInfo to be completed and deleted early, but then an active buffer on the IMGU can complete and be unable to find the FrameInfo for it to complete correctly. Do not mark metadataProcessed early on the event that a single buffer is detected as cancelled. The stopping of the V4L2 devices will ensure that all queued buffers are returned to us and we can follow the normal and expected shutdown sequence. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24libcamera: pipeline: ipu3: Stop IPA before stopping devicesKieran Bingham
The IPA should be stopped before the hardware devices to ensure that all asynchronous actions have completed within the IPA before resources are removed and released. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-23meson: Add configuration option to build the cam applicationLaurent Pinchart
Building the cam application isn't always desired, for instance in a production environment that only needs the libcamera library. Add a meson option to disable it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-23meson: Use subdir_done() to reduce indentationLaurent Pinchart
Reduce the indentation in the gstreamer and qcam meson.build with subdir_done(). This follows similar patterns in cam and v4l2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::configure()Naushir Patuck
Rename ConfigInput to IPAConfig to be more consistent with the naming, and remove ConfigInput::op, as it is never used. Replace ConfigOutput with a ControlList type, as that is the only return type from ipa::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::start()Naushir Patuck
Separate out the in and out parameters in ipa::start() as they are not the same. This function now takes in a ControlList and returns out a struct StartConfig which holds a ControlList and drop frame count for the pipeline handler to action. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Remove unused member variableNaushir Patuck
The lastMode_ member variable is now unused, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Move the controller initialise to ipa::init()Naushir Patuck
The controller initialise is a one-off operation, so move it from ipa::configure() to ipa::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23pipeline: raspberrypi: Conditionally open the embedded data nodeNaushir Patuck
Conditionally open the embedded data node in pipeline_handler::match() based on whether the ipa::init() result reports if the sensor supports embedded data or not. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23pipeline: ipa: raspberrypi: Open the CamHelper on ipa::init()Naushir Patuck
Move the opening of the CamHelper from ipa::configure() to ipa::init(). This allows the pipeline handler to get the sensor specific parameters in pipeline_handler::match() where the ipa is initialised. Having the sensor parameters available earlier will allow selective use of the embedded data node in a future change. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: Add sensor model string to IPASettingsNaushir Patuck
Pass the sensor model string to the IPA init() method through the IPASettings structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23android: Return -EUSERS when failed to open a Camera that's in usePaul Elder
The correct return value for the HAL for hal_dev_open() when trying to open a camera that's already opened is EUSERS. Make hal_dev_open() return -EUSERS, and plumb the logic for this through CameraHalManager::open(). This allows the following CTS tests to pass: - android.hardware.camera2.cts.CameraManagerTest#testCameraManagerOpenAllCameras - android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-23libcamera: device_enumerator: Remove unnecessary rvalue referencesHirokazu Honda
There are std::unique_ptr rvalue reference arguments. They are intended to pass the ownership to the functions. In the case, it is right to let the argument be std::unique_ptr value and pass by std::move(). Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-22android: camera_device: Do not default External to FrontJacopo Mondi
Now that the camera location is not defaulted anymore in the library but doesn't get registered if the firmware interface does not provide the information, do not default it to FRONT if LocationExternal is reported. To maintain compatibility with CTS requirements, default location to FRONT only if the camera property is not available. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-22libcamera: camera_sensor: Do not register Location if not availableJacopo Mondi
Do not register the Location property if not available from the firmware interface instead of defaulting it to External. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-22cam: Do not assume Location is availableJacopo Mondi
In preparation to register the Location property only if the firware interface provides it, do not assume it is available and build the camera name using the camera sensor model as a fallback. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-03-20pipeline: simple: Update documentation on pipeline setupMarian Cichy
After commit 4671911df040 ("pipeline: simple: Use breadth-first search to setup media pipeline"), the explanation in the SimplePipeline documentation how the handler tries to find a valid path to capture device does not reflect the reality anymore. Update the text to the new situation. Fixes: 4671911df040 ("pipeline: simple: Use breadth-first search to setup media pipeline") Signed-off-by: Marian Cichy <m.cichy@pengutronix.de> Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-19libcamera: request: Fix documentation of controls() methodMarian Cichy
The documentation of the controls() method refers to the methods ControlList::operator[]() and ControlList::update(), which do not exist. Instead refer to ControlList::get() and ControlList::set() to achieve a similar documentation. Fixes: a8c40942b99e ("libcamera: controls: Improve the API towards applications") Signed-off-by: Marian Cichy <m.cichy@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17libcamera: ipu3: Pass the BDS rectangle at IPA configure callJean-Michel Hautbois
The IPU3 IPA will need the BDS configuration when the AWB/AGC algorithm will be integrated. In order to do that, the configure() interface needs to be modified. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17libcamera: ipu3: Move ipa configuration from start() to configure()Jean-Michel Hautbois
IPA was configured after all the pipeline devices were started, including IPA itself. Move it at the end of configure() call. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-16pipeline: simple: Use breadth-first search to setup media pipelineMarian Cichy
When the SimplePipeline is setting up its data and media pipeline in the SimpleCameraData constructor, it merely tries to find the first valid pad and link to the next entity, starting from the camera sensor. Following this path may not always lead to a valid capture device and therefore the setup will fail on some machines. This is for example an issue when using the SimplePipeline on an i.MX-6Q with its i.MX IPU. This commit implements a different approach to setup the media-pipeline by finding the shortest path to a valid capture device, using the breadth-first search algorithm. On i.MX6Q, the shortest path has a good chance to be the path from the sensor to the CSI capture device, as other paths may involve image converters, encoders or other IPU blocks and will have therefore more nodes. Signed-off-by: Marian Cichy <m.cichy@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>