| Age | Commit message (Collapse) | Author |
|---|
|
Naming a variable that refers to command line options 'conf' is
confusing as we using 'config' and 'cfg' to refer to camera and stream
configurations. Rename it to 'opt'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraConfiguration class implements a simple storage of
StreamConfiguration with internal validation limited to verifying that
the stream configurations are not empty. Extend this mechanism by
implementing a smart validate() method backed by pipeline handlers.
This new mechanism changes the semantic of the camera configuration. The
Camera::generateConfiguration() operation still generates a default
configuration based on roles, but now also supports generating empty
configurations to be filled by applications. Applications can inspect
the configuration, optionally modify it, and validate it. The validation
implements "try" semantics and adjusts invalid configurations instead of
rejecting them completely. Applications then decide whether to accept
the modified configuration, or try again with a different set of
parameters. Once the configuration is valid, it is passed to
Camera::configure(), and pipeline handlers are guaranteed that the
configuration they receive is valid.
A reference to the Camera may need to be stored in the
CameraConfiguration derived classes in order to access it from their
validate() implementation. This must be stored as a std::shared_ptr<> as
the CameraConfiguration instances belong to applications. In order to
make this possible, make the Camera class inherit from
std::shared_from_this<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Move the pipeline handler camera data classes, defined in the scope of
the respective pipeline handler class, to the top level of the libcamera
namespace. This prepares for the introduction of other classes that will
make use of them in the IPU3 and RkISP1 pipeline handlers. The UVC and
VIMC pipeline handlers are updated as well for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To prepare for specialising the CameraConfiguration class in pipeline
handlers, return a pointer to a camera configuration instead of a
reference from Camera::generateConfiguration(). The camera configuration
always needs to be allocated from the pipeline handler, and its
ownership is passed to the application.
For symmetry, change Camera::configure() to take a CameraConfiguration
pointer instead of a reference. This aligns with our coding practice of
passing parameters that are modified by the callee by pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Refactor the CameraConfiguration structure to not rely on Stream
instances. This is a step towards making the camera configuration object
more powerful with configuration validation using "try" semantics.
The CameraConfiguration now exposes a simple vector-like API to access
the contained stream configurations. Both operator[]() and at() are
provided to access elements. The isEmpty() method is renamed to empty()
and the methods reordered to match the std::vector class.
As applications need access to the Stream instances associated with the
configuration entries in order to associate buffers with streams when
creating requests, expose the stream selected by the pipeline handler
through a new StreamConfiguration::stream().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to prepare for an API overhall of the camera configuration
generation, remove the StreamUsage class and replace its uses by stream
roles. The size hints can't be specified anymore, and will be replaced
with an API on the StreamConfiguration to negotiate configuration
parameters with cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Rename the configureStreams() and streamConfiguration() methods to
configure() and generateConfiguration() respectively in order to clarify
the API. Both methods deal with CameraConfiguration objects, and are
thus not limited to streams, even if a CameraConfiguration currently
contains streams only.
While at it, remove the qcam MainWindow::configureStreams() method that
is declared but never defined or used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement a class to wrap around an IPA module shared object.
For now, just load a struct IPAModuleInfo with symbol name
ipaModuleInfo from an IPA module .so shared object.
Also provide a public header file including the struct IPAModuleInfo,
structured such that both C and C++ IPA modules are supported.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 1a813a5c3ab7 introduced usage of an uninitialised variable. Fix it.
Fixes: 1a813a5c3ab7 ("libcamera: media_device: Handle media device fd in acquire() and release()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
We use the std::ostringstream class to generate log messages in the
Camera class. The stream is initialised with initial content, but is not
opened without seeking to the end, which results in the content being
overwritten immediately. Fix it by opening the stream with
std::ios_base::ate.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To allow more than one application using libcamera simultaneously there
can be no overlap between which cameras are in use by which user. As a
camera is part of a pipeline handler and there might be shared resources
between all cameras exposed by that pipeline handler it's not enough to
to only lock access to a single camera, all cameras from that pipeline
need to be tied to the same process.
Allow for this by locking the whole pipeline when one of its cameras
is acquired by the user. Other processes can still enumerate and list
all cameras in the system but can't acquire a camera from a locked
pipeline handler.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add lock() and unlock() which are backed by the MediaDevice
implementation and lock all media devices claimed by a pipeline handler
instance.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of requiring each pipeline handle implementation to keep track
of calling release() on its media devices upon deletion, keep track of
them in the base class. Add a helper that pipeline handlers shall use
to acquire a media device instead of directly interacting with the
DeviceEnumerator.
This also means that pipeline handler implementations do no need to keep
a shared_ptr<> reference to the media devices they store locally as the
PipelineHandler base class will keep a shared_ptr<> reference to all
media devices consumed for the entire lifetime of the pipeline handler
implementation.
Centrally keeping track of media devices will also be beneficial
to implement exclusive access to pipelines across processes.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add lock() and unlock() which are backed by lockf() and allow an
instance of libcamera to claim exclusive access to a media device.
These functions are the base of allowing multiple user of libcamera to
coexist in the system without stepping on each other's toes.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All external callers to open() and close() have been refactored and
there is no need to expose these functions anymore, make them private.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To gain better control of when a file descriptor is open to the media
device and reduce the work needed in pipeline handler implementations,
handle the file descriptor in acquire() and release().
This changes the current behavior where a file descriptor is only open
when requested by the pipeline handler to that one is always open as
long a media device is acquired. This new behavior is desired to allow
implementing exclusive access to a pipeline handler between processes.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no reason to reread the MEDIA_IOC_DEVICE_INFO information every
time the media device is opened. Move it populate() where it will be
read once together the other information about the media device.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the need for the caller to open and close the media device when
populating the MediaDevice. This is done as an effort to make the usage
of the MediaDevice less error prone and the interface stricter.
The rework also revealed and fixes a potential memory leak in
MediaDevice::populate() where resources would not be deleted if the
second MEDIA_IOC_G_TOPOLOGY would fail.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for adding more responsibility to MediaDevice::acquire()
remove unneeded calls to acquire() and release(), and make sure all
needed calls to acquire() are checked and acted on.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for some NV formats:
- V4L2_PIX_FMT_NV12, V4L2_PIX_FMT_NV21
- V4L2_PIX_FMT_NV16, V4L2_PIX_FMT_NV61
- V4L2_PIX_FMT_NV24, V4L2_PIX_FMT_NV42
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is not sustainable to add a new flag for every new video format
family (eg. YUYV, RGB, NV, MJPEG, etc), so add a formatFamily enum to
indicate these in the FormatConverter.
Note that formats are grouped into families based on if they are able to
share a set of parameters for conversion.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for the RGB format supported by VIMC (V4L2_PIX_FMT_BGR24,
V4L2_PIX_FMT_RGB24 and V4L2_PIX_FMT_ARGB32).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
A udev-based device enumerator is not sufficient, since libudev is an
optional dependency, or udev might fail. In these cases, we should fall
back to using sysfs to enumerate devices.
Add a DeviceEnumeratorSysfs class which is a specialization of
DeviceEnumerator that uses sysfs to enumerate media devices on the
system.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If a component tries to open an unsupported device type, no error is presented
unless debug is enabled.
Report an error if an unsupported device type is opened to ease pipeline
development.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Name all instances of CameraConfiguration "config", and all instances of
StreamConfiguration "cfg" accross the cam and qcam applications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Name all instances of CameraConfiguration "config", and all instances of
StreamConfiguration "cfg" accross all pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Several of our structures include width and height fields that model a
size while we have a Size class for that purpose. Use the Size class
through libcamera, and give it a toString() method like other geometry
and format classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The uvcvideo and vimc pipeline handlers print the requested resolution
in their configureStreams() operation. This duplicates a generic log
statement in the Camera::configureStreams() method, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The makedev() macro is defined in sys/sysmacros.h, include the header
explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The glibc read() and write() functions are defined with the
__warn_unused_result__ attribute when using FORTIFY_SOURCE. Don't ignore
their return value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPU3 and RKISP1 pipeline handlers log the camera configuration they
propose in their streamConfiguration() methods. Other pipeline handlers
are expected to log similar information, move it to the Camera class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Make sure all requests queued to a camera only contain streams which
have been configured and belong to the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera depends on libudev for device enumeration. It is however
useful to allow building documentation without requiring the dependency
to be installed. Make the libudev dependency optional and compile the
udev-based device enumerator out when libudev is not present.
Note that while libcamera will compile without libudev, it will not be
able to enumerate devices. A sysfs-based device enumerator is planned as
a fallback but not implemented yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2Device will use the same deviceNode for two directions in the
case of an M2M device.
Add the direction to identify the queue direction on each instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some \todo comments are outdated and refer to tasks that have been
completed. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Adding an integer value to a char pointer doesn't concatenate strings,
it indexes in the pointed string. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
According to clang, variable-length arrays can't be initialised. Don't
do so, and explicitly set the last element to 0 instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Buffer is a class, not a struct. Fix a variable declaration accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Several overridden virtual functions are not marked with override. Fix
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
enum LogSeverity values are assigned or compared to -1 to flag invalid
log severities. This generates compilation warnings with clang. Fix it
by adding an explicit LogInvalid entry to the enumeration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add missing parentheses to fix a bitwise test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Several structures are forward-declarated as classes. Fix this by using
the struct keyword where appropriate, or removing the forward
declaration when not needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
issetugid()
When secure_getenv() is not available, need to have a workaround.
Check if secure_getenv() is present, otherwise call issetugid() on its
place.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: include stdlib.h]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The viewfinder and main output require identical logic for buffer and
request completion. Connect the viewfinder bufferReady signal to the slot
and handle requests for both main output and viewfinder there.
Update the slot logic to complete the request only when the last buffer
has completed, and make sure to complete requests in the same order they
have been queued to the pipeline handler.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for queueing requests for multiple streams in the IPU3
pipeline handler class.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Perform allocation and setup of memory sharing between the CIO2 output
and the ImgU input and allocate memory for each active stream.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use and inspect the stream roles provided by the application to
streamConfiguration() to assign streams to their intended roles and
return a default configuration associated with them.
Support a limited number of usages, with the viewfinder stream able to
capture both continuous video streams and still images, and the main
output stream supporting still images only. This is an artificial
limitation until we figure out the exact capabilities of the hardware.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Sub-class the Stream class with an IPU3-specific implementation and
create each IPU3 camera with two streams: 'output' and 'viewfinder'
which represent the video streams from main and secondary ImgU output
respectively.
Rework stream configuration to handle the two video streams 'output'
and 'viewfinder' separately.
As the IPU3 driver requires viewfinder and stat video nodes to be
started not to stall ImgU processing, configure 'output', 'viewfinder'
and 'stat' regardless of the user-requested active streams.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When logging the camera configuration, the same ostringstream instance
is used to assemble a message describing configuration of all the
configured streams.
After the first stream configuration has been assembled, the use of
std::hex modifies the ostringstream basefield, causing all successive
integers values inserted in the stream to be expressed as hexadecimals.
Fix that by resetting the stream's basefield to decimal, before
assembling a stream configuration description.
Before this patch:
INFO Camera camera.cpp:615 (0) 640x480-0x3231564e (1) 140xa0-0x3231564e
After this patch:
INFO Camera camera.cpp:616 (0) 640x480-0x3231564e (1) 320x160-0x3231564e
Fixes: 9c9078133216 ("libcamera: camera: Log requested configuration in configureStreams()")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
