summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-01-18libcamera: camera_sensor: Default 'location' to ExternalJacopo Mondi
If the sensor driver does not report the camera location default it to 'External' instead of 'Front'. As the camera location is used to construct the camera unique name presented to the user, it makes more sense to report multiple 'External' cameras instead of multiple 'Front' ones. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-01-18libcamera: camera_sensor: Default analogue crop rectangleJacopo Mondi
As support for the V4L2_SEL_TGT_CROP selection target used to read the sensor analogue crop rectangle is schedule to become mandatory but is still optional, use the sensor's active area size as fallback value to allow the creation of the CameraSensorInfo in the case the driver does not support it. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-01-18libcamera: camera_sensor: Provide fall-back for sensor propertiesJacopo Mondi
Support for the V4L2 selection API is currently optional in the CameraSensor class. Properties registered by using values read through that API are defaulted in several different places (the Android camera HAL or the CameraSensor class). In the future support for the selection API will be made mandatory, but to give time to sensor drivers in all test platforms to be updated, use sensor resolution as fallback values for sensor pixel array properties and cache them as class member variables. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-01-18libcamera: camera_sensor: Validate driver supportJacopo Mondi
The CameraSensor class requires the sensor driver to report information through V4L2 controls and through the V4L2 selection API, and uses that information to register Camera properties and to construct CameraSensorInfo class instances to provide them to the IPA. Currently, validation of the kernel support happens each time a feature is requested, with slighly similar debug/error messages output to the user in case a feature is not supported. Rationalize this by validating the sensor driver requirements in a single function Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-01-13libcamera: sysfs: Fix directory exists checkNiklas Söderlund
The scope of File::exists() was changed to only validate that a file exists and is therefore not usable to check if a directory exists. This breaks the persistent name generation for DT based systems as it uses File::exists() to check for directories, fix this by using stat() directly. On Scarlet the persistent names of the cameras are impacted by this and where incorrectly reported as: $ cam -l Available cameras: 1: Internal front camera (platform/ff160000.i2c/i2c-7/7-003c ov2685) 2: Internal front camera (platform/ff160000.i2c/i2c-7/7-0036 ov5695 While the expected ones are restored with this fix: $ cam -l Available cameras: 1: Internal front camera (/base/i2c@ff160000/camera@3c) 2: Internal front camera (/base/i2c@ff160000/camera@36) Fixes: 8f4e16f014c820a0 ("test: file: Check that directories are not treated as files") Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-01-12libcamera: pipelines: ipu3: Simplify error bail out path on start()Umang Jain
On the bail out path, always ensure that ImgU and CIO2 are stopped before freeing the buffers. V4L2VideoDevice class guarantees that calling stop() without having to call start() is harmless, hence use this guarantee to simplify error paths. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-01-12libcamera: v4l2_videodevice: Track streaming stateKieran Bingham
Track the state of streamon/streamoff calls to simplify error paths. Ensuring that streamOff() can be called on non-streaming streams facilitates simpler error code paths, where a set of devices can all call streamOff regardless of their initialisation state. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-01-05libcamera: camera: Fix-typoSebastian Fricke
s/chance/change/ Signed-off-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-01-04android: camera_device: Only advertise RAW support if RAW16 is availableNiklas Söderlund
The Android camera2 API defines a RAW capture capability ([1]) for devices that support "outputting RAW buffers and metadata for interpreting them". This capability requires the camera device to support RAW_SENSOR ([2]) as an output format. Despite what its name may sound like, the RAW_SENSOR format is defined as a 16 bits RAW format, not an opaque implementation-dependent format (which is instead called RAW_PRIVATE). Devices may additionally support the RAW10 and RAW12 formats, but that isn't enough to claim RAW capture capability. To comply with the API requirements, only report the ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability when 16-bit RAW is supported. [1] https://developer.android.com/reference/android/hardware/camera2/CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW [2] https://developer.android.com/reference/android/graphics/ImageFormat#RAW_SENSOR Suggested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-30src: meson: Simplify v4l2 enablementKieran Bingham
Simplify the src level meson file by moving the declaration of the v4l2 subdir to match the other invocations, making use of 'subdir_done()' to break out if the adaptation layer is not enabled. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-30src: meson: Re-order subdir layoutKieran Bingham
Move the android subdir below the configuration options to keep all subdirs together. Add a comment explaining why android must come first, and some padding to group the libcamera and ipa components, applications, and remaining adaptation layers. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-30libcamera: file: Check files exist()Kieran Bingham
Ensure that when we check for existence with File() it will only return if the path leads to a file, and not a directory. Device nodes which could still be opened by this class are still supported. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-12-30android: camera_device: Simplify properties.get()Jacopo Mondi
When accessing the value of a property by reading the properties ControlList content with ControlList::get<>() it is not necessary to specify the template type as it is already conveyed by the Control instance provided as first argument. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-30android: camera_device: Report ColorFilterArrangementJacopo Mondi
Conditionally report the ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT property inspecting the draft property reported by the libcamera Camera. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-30libcamera: camera_sensor: Register ColorFilterArrangementJacopo Mondi
Inspect the list of media bus codes supported by the camera sensor in order to deduce the color filter arrangement and register the ColorFilterArrangement draft property. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-30libcamera: bayer_format: Add support for mbus codesJacopo Mondi
The existing implementation of the BayerFormat class supports converting a V4L2PixelFormat to a BayerFormat and vice-versa. Expand the class by adding support for converting a media bus code to a BayerFormat instance, by providing a conversion table and a dedicated static methods. Do not provide support for converting a BayerFormat to a media bus code as there's no 1-to-1 mapping between the two. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-30libcamera: properties: ColorFilterArrangement draft propertyJacopo Mondi
Define the 'ColorFilterArrangement' draft property. The property is currently identical to ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-28libcamera: pipeline_handler: Remove Camera pointer from CameraDataNiklas Söderlund
There are no users left of this field, drop it. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-28libcamera: pipeline_handler: Remove Camera argument from request handlingNiklas Söderlund
There is no need to pass the Camera pointer to queueRequest(), completeBuffer() and completeRequest() as the Request also passed contains the same information. Remove the Camera argument to avoid situations where the information in the Request and the argument differ. There is no functional change and no public API change as the interface is only used between the Camera and PipelineHandler. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-27libcamera: pipeline: simple: Remove the unused configs_ variablePhi-Bang Nguyen
Remove the unused configs_ member variable in SimpleCameraData. Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-12-27libcamera: bound_method: Fix enumerators documentationLaurent Pinchart
The Doxygen documentation for enumerators of the ConnectionType enumeration prefixes the enumerator name with the enumeration name. For unscoped enumerations, this is incorrect. Drop the scope. This fixes warnings produced by Doxygen when multiple enumerators with identical names are defined in different scopes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-12-20ipa: raspberrypi: Add digital gain to libcamera metadataDavid Plowman
The digital gain reported by the AGC algorithm is reported in the metadata that is included in completed requests. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-20libcamera: controls: Add DigitalGain controlDavid Plowman
This control reports the global digital gain applied by the pipeline as a whole, after capturing a raw image from the sensor. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-18libcamera: pipeline: simple: Remove non-implemented methodsJacopo Mondi
The initLinks() and createCamera() methods are declared but never defined. Remove them. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-18android: camera_device: Report number of out streamsJacopo Mondi
Report the number of supported output streams through the ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS static metadata. The camera HAL currently supports: - 1 optional RAW stream - 2 YUV streams - 1 JPEG stream Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-18android: camera_device: Report pipeline depthJacopo Mondi
Report the pipeline depth in the capture results if the pipeline reports it. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-16ipa: raspberrypi: Only validate ISP and sensor control during configureNaushir Patuck
There is no need to validate all the ISP and sensor V4L2 control on every use. Simply validate them once during the IPA configuration, and fail if a required control is not available. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-16ipa: raspberrypi: Rename unicamCtrls_ to sensorCtrls_Naushir Patuck
These specific controls are part of the sensor device, so rename them appropriately. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-14libcamera: pipeline: Manage resources with std::unique_ptr<>Laurent Pinchart
Replace manual resource destruction with std::unique_ptr<> where applicable. This removes the need for several destructors. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2020-12-14libcamera: pipeline: vimc: Use V4L2*::fromEntityName() where possibleLaurent Pinchart
Replace manual construction of V4L2VideoDevice and V4L2Subdevide with the fromEntityName() helper where possible. The returned pointer is managed as a std::unique_ptr<>, which simplifies the VimcCameraData destructor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2020-12-14libcamera: pipeline: raspberrypi: Don't leak RPiCameraData::sensor_Laurent Pinchart
The CameraSensor instance stored in RPiCameraData::sensor_ is allocated dynamically and never deleted. Fix the memory leak by storing it in a std::unique_ptr<>. Fixes: 740fd1b62f67 ("libcamera: pipeline: Raspberry Pi pipeline handler") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2020-12-14libcamera: Replace ARRAY_SIZE() with std::size()Laurent Pinchart
C++17 has a std::size() function that returns the size of a C-style array. Use it instead of the custom ARRAY_SIZE macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-14android: camera_device: Replace auto with explicit typeLaurent Pinchart
The auto keyword facilitates writing code. It avoids typing out very long types, which can make the code more readable, but it can also have a negative impact on readability as it requires the reader (including reviewers) to look up the type of the variable. Replace one occurrence of auto with the explicit type where doing so doesn't require a long type name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-14android: camera_device: Temporary fix sensor propertiesJacopo Mondi
The ChromeOS camera service, which is the current main user of the Android Camera HAL, fails to start if the pixel array properties are not registered. As the sensor driver for the Soraka test device have not yet been updated to report their pixel array properties through the V4L2 selection API, temporary fix the gap by re-establishing the default properties values removed by commit 1889cdc2e91c ("android: camera_device: Initialize pixel array properties") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-11ipa: raspberrypi: Move initial frame drop decision to AGC/AWBDavid Plowman
Previously the CamHelper was returning the number of frames to drop (on account of AGC/AWB converging). This wasn't really appropriate, it's better for the algorithms to do it as they know how many frames they might need. The CamHelper::HideFramesStartup method should now just be returning the number of frames to hide because they're bad/invalid in some way, not worrying about the AGC/AWB. For many sensors, the correct value for this is zero. But the ov5647 needs updating as it must return 2. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: Estimate the colour temerature if starting with fixed ↵David Plowman
colour gains When the AWB is started from "cold" with fixed colour gains, we try to estimate the colour temperature this corresponds to (if a calibrated CT curve was supplied). When fixed colour gains are set after the AWB has been running, we leave the CT estimate alone, as the one we have is probably sensible. This estimated colour is passed out in the metadata for other algorithms - notably ALSC - to use. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: Compute inverse of piecewise linear functionDavid Plowman
Add a method to the piecewise linear function (Pwl) class to compute the inverse of a given Pwl. If the input function is non-monotonic we can only produce a best effort "pseudo" inverse, and we signal this to the caller. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: awb: Add GetConvergenceFrames method to AWB base classDavid Plowman
We add a GetConvergenceFrames method to the AwbAlgorithm class which can be called when the AWB is started from scratch. It suggests how many frames should be dropped before displaying any (while the AWB converges). The Raspberry Pi specific implementation makes this customisable from the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: agc: Add GetConvergenceFrames method to AGC base classDavid Plowman
We add a GetConvergenceFrames method to the AgcAlgorithm class which can be called when the AGC is started from scratch. It suggests how many frames should be dropped before displaying any (while the AGC converges). The Raspberry Pi specific implementation makes this customisable from the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11libcamera: pipeline: raspberrypi: Pass the drop frame count in start, not ↵David Plowman
configure The number of frames to drop (not display) is passed back now from the start method, not configure. This means applications have a chance to set fixed exposure/gain before starting the camera and this can affect the frame drop count that is returned. Note how we need to be able to tell the very first time we start the camera from subsequent restarts, hence addition of the "firstStart_" flag. Both the IPA implementation file and the pipeline handler need matching modifications. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11libcamera: pipeline: raspberrypi: Allow ScalerCrop to work when passed in ↵David Plowman
Camera::start The ScalerCrop control is handled by the pipeline handler, not the IPA, so must be handled explicitly in the Camera::start method. The ScalerCrop code used when processing requests has been factored out to make it easy to reuse. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11android: camera_device: Reorder configurations before requestingHirokazu Honda
This reorders Camera3Configs before executing CameraConfiguration::validate() to make it easier for the Camera to satisfy the Android framework request. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Add blank line and fix compilation on gcc 7. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11android: camera_device: Use Camera3StreamConfig in configureStreams()Hirokazu Honda
Use the newly introduced Camera3StreamConfig to associate the Android requested streams with the associated StreamConfiguration in a vector of configurations. This change prepares to sort the vector of configuration before using it to configure the Camera and populate the streams_ vector. No functional changes intended. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11android: camera_device: Introduce Camera3StreamConfigHirokazu Honda
Camera3StreamConfig is a new class to store camera3_stream and types with associated StreamConfiguration. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-09libcamera: v4l2_device: Return a unique pointer from fromEntityName()Laurent Pinchart
The fromEntityName() function returns a pointer to a newly allocated V4L2Device instance, which must be deleted by the caller. This opens the door to memory leaks. Return a unique pointer instead, which conveys the API semantics better than a sentence in the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-09libcamera: v4l2_subdevice: Return a unique pointer from fromEntityName()Laurent Pinchart
The fromEntityName() function returns a pointer to a newly allocated V4L2Subdevice instance, which must be deleted by the caller. This opens the door to memory leaks. Return a unique pointer instead, which conveys the API semantics better than a sentence in the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-08pipeline: ipa: raspberrypi: Pass controls to IPA on startNaushir Patuck
Forward any controls passed into the pipeline handler to the IPA. The IPA then sets up the Raspberry Pi controller with these settings appropriately, and passes back any V4L2 sensor controls that need to be applied. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-08libcamera: ipa: Pass a set of controls and return results from ipa::start()Naushir Patuck
This change allows controls passed into PipelineHandler::start to be forwarded onto IPAInterface::start(). We also add a return channel if the pipeline handler must action any of these controls, e.g. setting the analogue gain or shutter speed in the sensor device. The IPA interface wrapper isn't addressed as it will soon be replaced by a new mechanism to handle IPC. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-08libcamera: pipeline: Pass libcamera controls into pipeline_handler::start()Naushir Patuck
Applications now have the ability to pass in controls that need to be applied on startup, rather than doing it through Request where there might be some frames of delay in getting the controls applied. This commit adds the ability to pass in a set of libcamera controls into the pipeline handlers through the pipeline_handler::start() method. These controls are provided by the application through the camera::start() public API. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-07pipeline: ipa: raspberrypi: Handle failures during IPA configurationNaushir Patuck
If the IPA fails during configuration, return an error flag to the pipeline handler and fail the use case gracefully. At present, the IPA configuration can fail for the following reasons: - The sensor is not recognised, and fails to open a CamHelper object. - The pipeline handler did not pass in controls for the ISP and sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>