| Age | Commit message (Collapse) | Author |
|---|
|
Simple pipeline retrieves the requests to complete from the
conversionQueue_. This patch stores the requests in conversionQueue_
explicitly. This explicit tracking is supposed to be preferred to
implicit retrieval and it simplifies the completion code a bit here and
in the followup patch that adds request cleanup on stop.
The change as implemented assumes that all the buffers in each of the
conversionQueue_ elements point to the same request, the one specified.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Let's extract the two occurrences of canceling a request to a common
helper. This is especially useful for the followup patch, which needs
to cancel a request from outside.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The "useDewarper_" class variable is set to true during configure
only if the configuration is !isRaw.
The main path buffer pool creation can thus be moved out of the
if (!isRaw) block at allocateBuffers() time.
Cosmetic change that will make it easier to create a buffer pool
for the main and self paths unconditionally in future.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
In order to support a default implementation for camera sensors when no
better implementation matches, libcamera needs to try "specialized"
implementations first and pick the default last. Make this possible by
adding a priority value for factories. Newly registered factories are
inserted in the factories list sorted by descending priority, and the
default factory uses a negative priority to be inserted as the last
element.
This mechanism may be a bit overkill in the sense that there is no
expected use cases for priorities other than trying the default last,
but the implementation is simple and easy to understand.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
With a camera sensor factory in place, the next step is to create an
abstract base class that all camera sensors implement, providing a
uniform API to pipeline handler. Turn all public functions of the
CameraSensor class into pure virtual functions, and move the
implementation to the CameraSensorLegacy class.
Part of the code is likely worth keeping as common helpers in a base
class. However, to follow the principle of not designing helpers with a
single user, this commit moves the whole implementation. Common helpers
will be introduced later, along with other CameraSensor subclasses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Introduce a factory to create CameraSensor derived classes instances by
inspecting the sensor media entity name and provide a convenience macro
to register specialized sensor handlers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit implements gstreamer controls for the libcamera element by
generating the controls from the control_ids_*.yaml files using a new
gen-gst-controls.py script. The appropriate meson files are also changed
to automatically run the script when building.
The gen-gst-controls.py script works similar to the gen-controls.py
script by parsing the control_ids_*.yaml files and generating C++ code
for each exposed control.
For the controls to be used as gstreamer properties the type for each
control needs to be translated to the appropriate glib type and a
GEnumValue is generated for each enum control. Then a
g_object_install_property(), _get_property() and _set_property()
function is generated for each control.
The vendor controls get prefixed with "$vendor-" in the final gstreamer
property name.
The C++ code generated by the gen-gst-controls.py script is written into
the template gstlibcamerasrc-controls.cpp.in file. The matching
gstlibcamerasrc-controls.h header defines the GstCameraControls class
which handles the installation of the gstreamer properties as well as
keeping track of the control values and setting and getting the
controls. The content of these functions is generated in the Python
script.
Finally the libcamerasrc element itself is edited to make use of the new
GstCameraControls class. The way this works is by defining a PROP_LAST
enum variant which is passed to the installProperties() function so the
properties are defined with the appropriate offset. When getting or
setting a property PROP_LAST is subtracted from the requested property
to translate the control back into a libcamera::controls:: enum
variant.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In preparation for generic support of all libcamera controls, remove the
manual handling of the auto-focus-mode property from the libcamerasrc
element.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The device provider is not supposed to have control properties, remove
the auto-focus-mode property which was introduced by accident.
Fixes: 5a142438b025 ("gstreamer: Add enable_auto_focus option to the GStreamer plugin")
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
v4l2-compliance reports an error due to VIDIOC_S_PARM being supported
without VIDIOC_G_PARM. Fix it by implementing VIDIOC_G_PARM. To satisfy
all compliance tests, VIDIOC_S_PARM also needs to be updated to properly
zero reserved fields.
Fixes: 5456e02d3f5b ("v4l2: Support setting frame rate in the V4L2 Adaptation layer")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The parsing of video/x-bayer sources from string makes it possible to
use cameras providing e.g SGRBG8 streams via gst-launch.
Like:
gst-launch-1.0 libcamerasrc camera-name=<cam> ! video/x-bayer,format=grbg
Without this change the gstreamer plugin complains about "Unsupported
media type: video/x-bayer".
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle multiple scaler crops being set through the rpi::ScalerCrops
control. We now populate the cropParams_ map in the loop where we handle
the output stream configuration items. The key of this map is the index
of the stream configuration structure set by the application. This will
also be the same index used to specify the crop rectangles through the
ScalerCrops control.
CameraData::applyScalerCrop() has been adapted to look at either
controls::ScalerCrop or controls::rpi::ScalerCrops. The latter takes
priority over the former. If only controls::ScalerCrop is provided, the
pipeline handler will apply the same scaler crop to all output streams.
Finally return all crops through the same ScalerCrops control via
request metadata. The first configure stream's crop rectangle is also
returned via the ScalerCrop control in the request metadata.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
At this point, the index is unused, but will be in a future commit where
we can set different crops on each ISP output.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a ispIndex field to CropParams that is used to track
which ISP output (0/1) will be used for a given stream during
configuration.
Tracking this information is required for an upcoming change where crop
rectangles can be specified for each configured stream. Currently, the
value is fixed to 0.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for assigning separate crop windows for each stream, add
a new CropParams structure that stores the existing ispCrop_ and
ispMinCropSize_ as fields. Use a new std::map to store a CropParams
structure where the map key is the index of the stream configuration in
the CameraConfiguration vector.
At preset, only a single CropParams structure will be set at key == 0 to
preserve the existing crop handling logic.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will be required when we program separate crop values to each ISP
output in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not cache the scalerCrop_ parameter. The cached value is used to
update the request metadata, but since this is not an expensive
operation (and can only occur once per frame), caching it is of limited
value.
This will simplify logic in a future commit where we can specify a
crop per-output stream.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a vendor control rpi::ScalerCrops that is analogous to the current
core::ScalerCrop, but can apply a different crop to each configured
stream.
This control takes a span of Rectangle structures - the order of
rectangles must match the order of streams configured by the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The RGB565 and RGB565_BE formats incorrectly specify a wrong value
of 3 bytes per group of pixels, when they actually use 2. Fix them.
Signed-off-by: Hou Qi <qi.hou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previous iterations of the ExposureModeHelper class had a
setShutterGainLimits() function, which got renamed to setLimits(). The
documentation still uses the old name. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When only a single camera is available, showing the camera selection
dialog is unnecessary. It's better to automatically select the available
camera without prompting the user for input.
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Plumb the dw100 dewarper as a V4L2M2M converter in the rkisp1 pipeline
handler. If the dewarper is found, it is instantiated and buffers are
exported from it, instead of RkISP1Path. Internal buffers are allocated
for the RkISP1Path in case where dewarper is going to be used.
The RKISP1 pipeline handler now supports scaler crop control through
the converter. Register the ScalerCrop control for the cameras created
in the RKISP1 pipeline handler.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Currently the rkisp1 pipeline handler only registers controls that are
related to the IPA. This patch prepares the rkisp1 pipeline-handler to
register camera controls which are not related to the IPA.
Hence, introduce an additional ControlInfoMap for IPA controls. These
controls will be merged together with the controls in the pipeline
handler (introduced subsequently) as part of updateControls() and
together will be registered during the registration of the camera.
This is similar to what IPU3 pipeline handler handles its controls.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the converter has cropping capability on its input, the interface
should support it by providing appropriate virtual functions. Provide
Feature::InputCrop in Feature enumeration for the same.
Provide virtual setInputCrop() and inputCropBounds() interfaces so that
the converter can implement its own cropping functionality.
The V4L2M2MConverter implements these interfaces of the Converter
interface. Not all V4L2M2M converters will have cropping ability
on its input, hence it needs to be discovered at construction time.
If the capability to crop is identified successfully, the cropping
bounds are determined during configure() time.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
This patch intends to extend the converter interface to have feature
flags, which enables each converter to expose the set of features
it supports.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
OV7251 is a mono VGA global shutter sensor that has a mainline
driver and works with libcamera.
Add the supporting files for it. The tuning is copied from OV9281.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add python bindings for quering vendor information from a ControlId.
While at it, update __repr__ so that it also prints the vendor.
Example usage:
>>> cid
libcamera.ControlId(20, libcamera.Saturation, ControlType.Float)
>>> cid.vendor
'libcamera'
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the vendor of the control can be queried, print it in
--list-controls.
Example output:
$ cam -c 1 --list-controls
Using camera platform/vimc.0 Sensor B as cam0
Control: libcamera::Brightness: [-1.000000..1.000000]
Control: libcamera::Contrast: [0.000000..2.000000]
Control: libcamera::Saturation: [0.000000..2.000000]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add vendor/namespace information to ControlId, so that the vendor can be
queried from it. This is expected to be used by applications either
simply to display the vendor or for it to be used for grouping in a
UI.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The delay values should be managed correctly. Not the dealys.
Correct accordingly.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This patch allows obtaining a black level from a tuning file in addition
to the camera sensor helper. If both of them define a black level, the
one from the tuning file takes precedence.
The use cases are:
- A user wants to use a different black level, for whatever reason.
- There is a sensor without known gains but with a known black level.
Because a camera sensor helper cannot be defined without specifying
gains, the only way to specify the black level is using the tuning
file. Software ISP uses its fallback gain handling in such a case.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The black level in software ISP is unconditionally guessed from the
obtained frames. CameraSensorHelper optionally provides the black level
from camera specifications now. Let's use the value if available.
If the black level is not available from the given CameraSensorHelper
instance, it's still determined on the fly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Like the hardware pipelines do. Not clearing frameContexts otherwise can
trigger asserts like "Frame context for ... has been overwritten by ..."
when switching between cameras using the swISP, e.g. on phones.
Clearing the configuration and active state will become more important
with upcoming changes such as getting the black level from the camera
helper.
Fixes: 04d171e6b299 ("libcamera: software_isp: Call Algorithm::queueRequest")
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In the python bindings ControlTypePoint is not handled in the
corresponding conversion functions. Add that.
While at it, sort the listings in the same order as the enum in
controls.h.
Fixes: 200d535ca85f ("libcamera: controls: Add ControlTypePoint")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AWB bit to prevent using invalid
or outdated data. As it doesn't happen regularly add an error message to
get notified when it happens.
For simpler code structure, the ColourTemperature metadata entry gets
written unconditionally and overwritten later if needed.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AUTOEXP bit to prevent using
invalid or outdated data. As it doesn't happen regularly add an error
message to get notified when it happens.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix typo in comment block formatting.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Alphabetical order of Forward declarations should be maintained hence,
'class V4L2Subdevice' should come after 'class SensorConfiguration'.
Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The 'found' flag was mistakenly understood that a compatible sensor
format has been found when a sensor configuration is passed in. However,
'found' related to the stream configuration's pixelformat, whether it is
supported by the RkISP1Path video node or not. It does not relate to the
sensor format, hence the check:
if (sensorConfig && !found)
doesn't make sense.
Rectify the above check with:
if (sensorConfig && !rawFormat.isValid())
to ensure a sensor format compatible with sensor configuration has been
set to rawFormat.
Fixes: 047d647452c4 ("libcamera: rkisp1: Integrate SensorConfiguration support")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
User-provided sensor configuration is never meant to be altered,
hence pass SensorConfiguration by `const` reference in
RkISP1Path::validate().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Commit 761545407c76 ("pipeline: rkisp1: Filter out sensor sizes not
supported by the pipeline") introduced a mechanism to determine maximum
supported sensor resolution and filter out resolutions that cannot be
supported by the ISP.
However, it missed to update the raw stream configuration path, where
it should have clamped the raw stream configuration size to the maximum
sensor supported resolution.
This patch fixes the above issue and can be confirmed with IMX283
on i.MX8MP:
From:
($) cam -c1 -srole=raw,width=5472,height=3072
INFO Camera camera.cpp:1197 configuring streams: (0) 5472x3648-SRGGB12
ERROR RkISP1 rkisp1_path.cpp:425 Unable to configure capture in 5472x3648-SRGGB12
Failed to configure camera
Failed to start camera session
To:
($) cam -c1 -srole=raw,width=5472,height=3072
INFO Camera camera.cpp:1197 configuring streams: (0) 4096x3072-SRGGB12
cam0: Capture until user interrupts by SIGINT
536.082380 (0.00 fps) cam0-stream0 seq: 000000 bytesused: 25165824
536.182378 (10.00 fps) cam0-stream0 seq: 000001 bytesused: 25165824
536.282375 (10.00 fps) cam0-stream0 seq: 000002 bytesused: 25165824
...
Fixes: 761545407c76 ("pipeline: rkisp1: Filter out sensor sizes not supported by the pipeline")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Integrate the RkISP1 pipeline handler to support sensor configuration
provided by applications through CameraConfiguration::sensorConfig.
The SensorConfiguration must be validated on both RkISP1Path (mainPath
and selfPath), so the parameters of RkISP1Path::validate() have been
updated to include sensorConfig.
The camera configuration will be marked as invalid when the sensor
configuration is supplied, if:
- Invalid sensor configuration (SensorConfiguration::isValid())
- Bit depth not supported by RkISP1 pipeline
- Sensor configuration output size is larger than maximum supported
sensor's size on RkISP1 pipeline
- No matching sensor configuration output size supplied by the sensor
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
In the case of an AWB search failure, the current algorithm logic will
return a point on the CT curve closest to where the search finisned.
This can be quite undesirable. Instead, add some bias params to the AWB
algorithm which will direct the search to a set CT value in the case
where statistics become unreliable causing the search to fail.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A default CT of 4500K is used in a couple of places. Add a constexpr
value for the default CT value and use it instead.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation of CameraConfiguration::validate() has one
misspelled "CameraConfiguration". Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A minor wording improvement suggested on refactoring review.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In many cases a static string literal is used as key. Thus
having the argument type be `const std::string&` is suboptimal
since an `std::string` object needs to be constructed before
the call.
C++17 introduced `std::string_view`, using which the call
can be done with less overhead, as the `std::string_view`
is non-owning and may be passed in registers entirely.
So make `YamlObject::{contains,operator[]}` take the string keys
in `std::string_view`s.
Unfortunately, that is not sufficient yet, because `std::map::find()`
takes an reference to `const key_type`, which would be `const std::string&`
in the case of `YamlParser`. However, with a transparent comparator
such as `std::less<>` `std::map::find()` is able to accept any
object as the argument, and it forwards it to the comparator.
So make `YamlParser::dictionary_` use `std::less<>` as the comparator
to enable the use of `std::map::find()` with any type of argument.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow Android HAL adapter to pass the face detection metadata control to
the pipeline and also send face detection metadata to the camera client
if the pipeline generates it.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
|
|
Add FaceDetectMode, FaceDetectFaceRectangles, FaceDetectFaceScores,
and FaceDetectFaceLandmark. Also add ControlTypePoint for supporting
FaceDetectFaceLandmark.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Becker Hsieh <beckerh@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
|
|
Add a control_type<> specialization for libcamera::Point to allow
storing data of that type in a ControlValue instance.
The new control type will be used by controls introduced in the
next patches.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Becker Hsieh <beckerh@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
