| Age | Commit message (Collapse) | Author |
|---|
|
In the description of DeviceMatch, the word 'appropriate' is
spelled incorrectly as 'appropriare'. Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Black may not be represented as 0 pixel value for given hardware, it may
be higher. If this is not compensated then various problems may occur
such as low contrast or suboptimal exposure.
The black pixel value can be either retrieved from a tuning file for the
given hardware, or automatically on the fly. The former is the right
and correct method, while the latter can be used when a tuning file is
not available for the given hardware. Since there is currently no
support for tuning files in software ISP, the automatic, hardware
independent way, is always used. Support for tuning files should be
added in future but it will require more work than this patch.
The patch looks at the image histogram and assumes that black starts
when pixel values start occurring on the left. A certain amount of the
darkest pixels is ignored; it doesn't matter whether they represent
various kinds of noise or are real, they are better to omit in any case
to make the image looking better. It also doesn't matter whether the
darkest pixels occur around the supposed black level or are spread
between 0 and the black level, the difference is not important.
An arbitrary threshold of 2% darkest pixels is applied; there is no
magic about that value.
The patch assumes that the black values for different colors are the
same and doesn't attempt any other non-primitive enhancements. It
cannot completely replace tuning files and simplicity, while providing
visible benefit, is its goal. Anything more sophisticated is left for
future patches.
A possible cheap enhancement, if needed, could be setting exposure +
gain to minimum values temporarily, before setting the black level. In
theory, the black level should be fixed but it may not be reached in all
images. For this reason, the patch updates black level only if the
observed value is lower than the current one; it should be never
increased.
The purpose of the patch is to compensate for hardware properties.
General image contrast enhancements are out of scope of this patch.
Stats are still gathered as an uncorrected histogram, to avoid any
confusion and to represent the raw image data. Exposure must be
determined after the black level correction -- it has no influence on
the sub-black area and must be correct after applying the black level
correction. The granularity of the histogram is increased from 16 to 64
to provide a better precision (there is no theory behind either of those
numbers).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
BGR888 is RGB888 with the red and blue pixels swapped, adjust
the debayering to swap the red and blue pixels in the bayer pattern
to add support for writing formats::BGR888.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard
bayer orders.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard
bayer orders.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To enable the Simple Soft ISP and Soft IPA for simple pipeline handler
configure the build with:
-Dpipelines=simple -Dipas=simple
Also using the Soft ISP for the particular hardware platform must
be enabled in the supportedDevices[] table. It is currently enabled
for and only for qcom-camss.
If the pipeline uses Converter, Soft ISP and Soft IPA aren't
available.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The converterBuffers_ and the converterQueue_ are not that specific
to the Converter, and could be used by another entity doing the format
conversion.
Rename converterBuffers_, converterQueue_, and useConverter_ to
conversionBuffers_, conversionQueue_ and useConversion_ to
disassociate them from the Converter.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Define the Soft IPA main and event interfaces, add the Soft IPA
implementation.
The current src/ipa/meson.build assumes the IPA name to match the
pipeline name. For this reason "-Dipas=simple" is used for the
Soft IPA module.
Auto exposure/gain and AWB implementation by Dennis, Toon and Martti.
Auto exposure/gain targets a Mean Sample Value of 2.5 following
the MSV calculation algorithm from:
https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf
Use CameraSensorHelper to convert the analogue gain code read from the
camera sensor into real analogue gain value. In the future this makes
it possible to use faster AE/AGC algorithm. Right now the CameraSensorHelper
lets us use the full range of analogue gain values.
If there is no CameraSensorHelper for the camera sensor in use, a
warning log message is printed.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Marttico <g.martti@gmail.com>
Signed-off-by: Marttico <g.martti@gmail.com>
Co-developed-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add CPU based debayering implementation. This initial implementation
only supports debayering packed 10 bits per pixel bayer data in
the 4 standard bayer orders.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a base class for debayer implementations. This is intended to be
suitable for both GPU (or otherwise) accelerated debayer implementations
as well as CPU based debayering.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a CPU based SwStats implementation for SoftwareISP / SoftIPA use.
This implementation offers a configure function + functions to gather
statistics on a line by line basis. This allows CPU based software
debayering to call into interleave debayering and statistics gathering
on a line by line basis while the input data is still hot in the cache.
This implementation also allows specifying a window over which to gather
statistics instead of processing the whole frame.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Marttico <g.martti@gmail.com>
Signed-off-by: Marttico <g.martti@gmail.com>
Co-developed-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SharedMemObject class
The SharedMemObject class template contains a fair amount of inline code
that does not depend on the template types T. To avoid duplicating it in
every template specialization, split that code to a separate base
SharedMem class.
We don't define copy semantics for the classes (we don't need one at the
moment) and we make them non-copyable since the default copy constructor
would lead to use-after-unmap.
Doxygen documentation by Dennis Bonke and Andrei Konovalov.
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move SharedMemObject class out of RPi namespace and put it into
include/libcamera/internal so that everyone could use it.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an argument to the constructor to specify dma heaps type(s)
to use. Can be DmaHeapFlag::Cma and/or DmaHeapFlag::System.
By default DmaHeapFlag::Cma is used. If both DmaHeapFlag::Cma and
DmaHeapFlag::System are set, CMA heap is tried first.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
DmaHeap class is useful outside the RPi pipeline handler too.
Move dma_heaps.h and dma_heaps.cpp to common directories. Update
the build files and RPi vc4 pipeline handler accordingly.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SimpleCameraConfiguration::validate() adjusts the configuration of its
streams (if the size is not in the outputSizes) to the captureSize. But
the captureSize itself can be not in the outputSizes, and then the
adjusted configuration won't be valid resulting in camera configuration
failure.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When file output is requested from cam app, it simply dumps the
processed data and it must be converted to a readable image format
manually. Let's add support for PPM output file format to make files
produced by cam directly readable by image display and processing
software.
For now, only BGR888 output format, which is the simplest one to use, is
supported but nothing prevents adding support for other output formats
if needed. Nevertheless, they would typically need byte reordering or
other conversions for PPM file format. It may be better to find a way to
dump the image data in other output formats directly using some of the
already existing file formats or raw file format converters.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Due to my mistake, commit 705601781b6a ("v4l2: Unset _TIME_BITS in
addition to _FILE_OFFSET_BITS") got merged with incorrect sorting of
defines. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
libcamera fails to build from source in Debian/Ubuntu on 32-bit
architectures under 64-bit time_t (to avoid the 'year 2038
problem'), because its v4l2 module legitimately un-sets
_FILE_OFFSET_BITS for building but this is not allowed without
also unsetting _TIME_BITS.
Having verified that nothing in this module is sensitive to 64-bit
time_t (none of the functions it intercepts handle time), we also
unset _TIME_BITS to allow this to build as before.
Signed-off-by: Steve Langasek <steve.langasek@canonical.com>
Reviewed-by: Dylan Aïssi <dylan.aissi@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a pipeline handler for the Mali-C55 ISP.
The pipeline doesn't currently support an IPA and does not run
any 3a algorithm but only handles the media graph topology and
formats/sizes configuration
Co-developed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the Android framework sends to the camera device settings
incrementally (only the ones that change are updated), the CameraDevice
class in the Android camera HAL keeps a copy of the last received
settings to be able to apply controls to the libcamera Camera and to
populate metadata correctly.
When a valid 'camera3Request->settings' is provided, it gets saved to
'lastSettings_' but 'descriptor->settings_' is not initialized until
the next frame (assuming it does not contain more settings).
Fix this by assigning to 'descriptor->settings_' the last saved
settings unconditionally.
Signed-off-by: Fang Hui <hui.fang@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Before adding more tests and more helper classes to lc-compliance,
reorganize the source tree to split test and helpers in two separate
directories.
While at it, rename the 'SimpleCapture' class and its derived classes to
just 'Capture'. Rename the source files accordingly.
Re-sort headers inclusions to please checkstyle.py too.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Fix a small typo in a comment.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a request fails to queue it is completed but with its status set to
RequestCancelled. Add a check in the requestComplete callback to make
sure that the request was completed successfully.
For the SimpleCaptureUnbalanced test we need to do this check only if
the capture isn't over yet, otherwise the few extra requests that get
cancelled at the end, which is the normal behavior, will make the test
fail.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Pipeline handlers may need to know the Bayer order produced by the
sensor when a Transform is applied (horizontal or vertical flip). This
is currently implemented manually in the Raspberry Pi pipeline handler.
Move the implementation to the CameraSensor class to make it usable in
other pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The CameraSensor class tests if the sensor HBLANK control is read-only
by comparing the minimum and maximum values, and documents this as being
a workaround for the lack of a read-only control flag in V4L2. This is
incorrect, as the V4L2 API provides such a flag. Use it to replace the
workaround.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraSensor class has grown a lot since its creation, with many
functions added for different types of purposes. They are not grouped by
categories in the class definition, generating confusion when reading
the header file. Improve readability by sorting functions by category:
- Getters for static data (model, entity, focus lens, ...)
- Format and sensor configuration accessors
- Properties and controls (including test pattern mode)
Update the .cpp file accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The CameraSensor::updateControlInfo() function is a wrapper around the
same function of the V4L2Subdevice class. It was meant to be called by
pipeline handlers that modify the sensor configuration directly,
bypassing the CameraSensor::setFormat() function. This never happened,
and the function is called once only, internally to the CameraSensor
class. No external users are foreseen, drop the function and call
V4L2Subdevice::updateControlInfo() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
In preparation for adding alternative implementations of the
CameraSensor class, move the code to a subdirectory to avoid cluttering
the main src/libcamera/ directory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The V4L2Subdevice class deals with streams in two places:
- In routing tables, streams as expressed as a pad number and a stream
number in a v4l2_subdev_route instance.
- In the format and selection get and set functions, streams as
expressed using the Stream structure, which binds the pad number and
stream number.
Expressing streams in different ways requires pipeline handlers and
other helpers to convert between the two representations. This isn't
much of an issue yet as libcamera has little stream-aware code, but it
is expected to increasingly become a burden.
To simplify the API, introduce a V4L2Subdevice::Route structure that
mimicks the kernel v4l2_subdev_route structure but represents streams as
V4L2Subdevice::Stream instances. This will improve seamless integration
of routes, formats and selection rectangles.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The main (and only at the moment) use case for the Routing::toString()
function is to print a representation of the routing table in a log
message. The function is implemented using an std::stringstream, and the
returned std::string is then inserted into an std::ostream. This is
inefficient. Replace the function with a specialization of the
operator<<() and use it in the caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Extend the V4L2Subdevice API with stream support for the functions that
get and set formats and selection rectangles. Add a Stream structure to
identify a subdev pad and stream, and use it to extend the V4L2Subdevice
functions that get and set formats and selection rectangles with stream
support.
To preserve the existing pad-based API, implement overloaded functions
that wrap the new stream-based API. This allows callers that are not
stream-aware to use a simpler pad-based API, instead of having to
explicitly set the stream number to 0 in all API calls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2SubdeviceFormat::mbus_code member doesn't follow the libcamera
coding style as it should use camelCase. Fix it by renaming it to just
'code', to shorten lines in addition to fixing the coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2SubdeviceFormat::bitsPerPixel() function is just a wrapper
around a MediaBusFormatInfo lookup. It made sense when the
MediaBusFormatInfo class was not exposed outside of the compilation
unit, but is now redundant. Drop it and use MediaBusFormatInfo in the
only caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Not all media bus formats describe image formats. Extend the
MediaBusFormatInfo class with a type member to indicate if the format
corresponds to image data or metadata, and add the (only) metatdata
format supported by the kernel to the known mediaBusFormatInfo.
The kernel doesn't (yet) have any metadata format specific to sensor
embedded data. This is being addressed in the V4L2 API. In preparation
for embedded data support, already introduce the EmbeddedData type here.
Corresponding formats will be added when available.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2SubdeviceFormatInfo structure, internal to the
v4l2_subdevice.cpp compilation unit, contains information about media
bus formats that will be useful in other parts of libcamera. To prepare
for this, expose the structure in the v4l2_subdevice.h header and turn
it into a class with a similar design as PixelFormatInfo.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for exposing the MediaBusFormatInfo structure as an internal
API, add a code member to the structure to store the media bus code.
This makes MediaBusFormatInfo usable standalone, without having to
externally associate the code related to the info.
The entries in the mediaBusFormatInfo map are becoming too long, so
split them on multiple lines.
While at it, swap the order of the members to match the PixelFormatInfo
class for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2SubdeviceFormatInfo structure contains information about a media
bus format, not a V4L2 subdevice format. Rename it to MediaBusFormatInfo
to clarify its purpose. Rename the formatInfoMap map accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is useful in many cases although not included in the stl.
Note: This is an ABI incompatible change.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Remove the entry from the `buffers_` mapping if
`Camera::exportFrameBuffers()` fails, otherwise
there would be a stale entry in the map.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The compiler generated destructor works fine, so use that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The single argument, of type `std::shared_ptr<Camera>`,
is passed by value, so it can simply be moved from in order to
avoid calling the copy constructor.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
parseRectangles currently always parses Rectangle controls as an array
of Rectangles. This causes non-array Rectangle controls to not be parsed
correctly, as when the ControlValue is get()ed, the non-array assertion
will fail.
Set the ControlValue with a single Rectangle in case a single Rectangle
has been specified in the yaml capture script to fix that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix embedded data byte-skipping for 14-bit modes (4 out of 7 bytes
carry register data), and allow 14-bit modes in IMX708 PDAF parsing.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add MEDIA_BUS_FMT_SBGGR14_1X14 etc to formatInfoMap.
Not adding any Y14 for now.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation for the SensorTemperature control has a spelling
mistake for thermal.
Fix it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The camera pipeline for MediaTek MT8365 consists of the following:
Raw sensor (+ external ISP) --> SENINF --> CAMSV30 --> DRAM
SENINF (SENsor INterFace) is a CSI-2 receiver.
CAMSV30 (Camera Simple Version) is a DMA Engine which bypasses
ISP3.0 and writes directly to DRAM.
Both SENINF and CAMSV30 are supported by V4L2 drivers.
MT8365 platform consists of a hardware converter called MDP which
supports up to three streams.
Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The plane validation in the stride helper incorrectly accepts the number
of planes as a plane index. Fix the off by one issue.
Fixes: e83727a194b5 ("libcamera: PixelFormatInfo: Add functions stride and frameSize")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PixelFormatInfo documentation has typo. Fix two of them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
