| Age | Commit message (Collapse) | Author |
|---|
|
Commit a3178dd0391f ("ipa: rkisp1: agc: drop hard-coded analogue gain range")
removed both minimum and maximum limits for the analogue gain value.
However, as some sensors can potentially have a minimum gain lower than
1.0, restore the check for the minimum limit.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the sensor's analogue gain range is known, drop the arbitrary
maximum limit for the sensor analogue gain.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The addition of the CameraSensorHelperImx327 class was not correctly
inserted in alphabetical sort order.
Move it to the correct location.
Fixes: 7d5b38e2ef41 ("libipa: camera_sensor_helper: Add IMX327 helper")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The controls relates to the public API, which doesn't expose IPA modules
as they are internal to libcamera. Replace the mention of "IPA" in the
controls documentation.
While at it, fix a small text reflow issue.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Do not advertise colour related controls (i.e. [A]WB, colour saturation)
in the ControlInfoMap of available controls returned out to the
application.
Silently ignore these controls in the control handler in case applications
don't use the advertised ControlInfoMap to validate controls.
As a drive-by fix, don't advertise controls::ColourCorrectionMatrix in
the ControlInfoMap as it is not handled by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new cfaPattern field to the IPACameraSensorInfo to pass the
CFA/Bayer pattern for the current sensor configuration to the IPA.
This field takes a value from properties::draft::ColorFilterArrangementEnum.
Populate cfaPattern in CameraSensor::sensorInfo(), called by the
pipeline handler before it calls ipa->init() and ipa->config().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix code formatting.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the noise profile and reference lux level with newly taken
calibration pictures. Remove GEQ/cross-talk processing block as this is
a mono sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We are using pybind11 'smart_holder' branch to solve the Camera
destructor issue (see the comment in this patch, or the commit
that originally added Python bindings support).
As it would be very nice to use the mainline pybind11 (which is packaged
in distributions), this patch adds a workaround allowing us to move to
the mainline pybind11 version.
The workaround is simply creating a custom holder class
(PyCameraSmartPtr), used only for the Camera, which wraps around the
shared_ptr. This makes the compiler happy.
Moving to mainline pybind11 is achieved with:
- Change the pybind11 wrap to point to the mainline pybdind11 version
- Tell pybind11 to always use shared_ptr<> as the holder for
PyCameraManager, as we use the singleton pattern for the
PyCameraManager, and using shared_ptr<> to manage it is a requirement
- Tell pybind11 to always use PyCameraSmartPtr<> as the holder for Camera
- Change the meson.build file to use a system-installed pybind11
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We have multiple methods which return an error code, mimicking the C++
API. Using exceptions is more natural in the Python API, so change all
those methods to raise an Exception instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move ColorSpace and Transform classes to separate files from the main
py_main.cpp, for clarity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current CameraManager.version doesn't work at all (raises a
TypeError), as that's not how you use expose C++ static methods as
Python class methods.
Fix it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 66c618f378aa ("android: mm: generic: use
GRALLOC_HARDWARE_MODULE_ID") made libhardware a required dependency for
the Android camera HAL on non-Chrome OS platforms. This isn't an issue
for real devices, as Android provides libhardware, but it prevents
compile-testing the camera HAL on traditional Linux systems.
To restore the compile-test coverage, stub the libhardware function used
by the camera HAL when libhardware isn't found.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # meson build test
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
PlatformFrameBufferAllocator is an abstraction over gralloc.
Right now hardwareModule_ points towards a CAMERA_HARDWARE_MODULE_ID.
When gralloc_open() is called we observe:
libcamera: DEBUG HAL camera3_hal.cpp:75 Open camera gpu0
libcamera: ERROR Camera camera.cpp:524 Camera in Configured state trying acquire() requiring state Available
01-23 14:14:04.742 370 416 E libcamera: FATAL HAL generic_frame_buffer_allocator.cpp:105 gralloc_open() failed: -87
Which is wrong, gralloc_open() is attempting to re-open the camera HAL,
instead of the gralloc HAL.
Point to a GRALLOC_HARDWARE_MODULE_ID instead so that we can request
buffers from gralloc in android.
Note: this adds new dependencies on android's libhardware [1] and on libdl.
[1] https://android.googlesource.com/platform/hardware/libhardware
Fixes: c58662c5770e ("android: Introduce PlatformFrameBufferAllocator")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Copy the sensor properties from Sony IMX290, as the IMX327 is a variant
of it.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust sort order]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a user uses a pipeline handler config file where a custom timeout
value is specified, it would lead to a segmentation fault when
loadPipelineConfiguration() tried to access the as yet uninitialised
V4L2VideoDevice object.
To fix this, parse the pipeline handler config file only after fully
initialising and registering the pipeline handler and V4L2VideoDevice
objects.
Fixes: 6c71ee1f15305 ("pipeline: raspberrypi: Introduce PipelineHandlerBase class")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for the Sony IMX327, which is added to the kernel with
commit 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327
variant"). It is basically a derivate of the IMX290, therefore also
derive the helper.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the sensor's analogue gain range is known (read-out in
IPARkISP1::configure()), drop the limiting hard-coded range.
This enables better performance in low-light conditions for sensors with
a higher gain (e.g. the imx327).
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When iterating over enabled pipelines and IPA modules, libcamera
descends into subdirectories in a recursive manner, which involves
nested loops. Both the outer and inner loops use the same loop variable
named 'pipeline'. As the outer loop uses the variable after descending
into the inner directory, it ends up using an incorrect value. Fix it by
moving all use of the variable before the subdir() call, and add a
comment that warns about the issue to avoid reintroducing it.
Fixes: e8526c0c2bc6 ("ipa: meson: Allow nested IPA directory structures")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that we allow IPA modules to live in nested directories for the
RaspberryPi platform, it is required to allow parsing one more level
to be able to run libcamera from the source directory.
Without this patch the $(builddir)/src/ipa/rpi/vc4/ipa_rpi_vc4.so
IPA module cannot be loaded.
The issue is only present when running from the source directory
as when libcamera is installed all IPA modules are deployed to a single
$(prefix)/$(libcamera_libdir)/libamera/ location.
Fixes: 46aefed208fe ("pipeline: meson: Allow nested pipeline handler directory structures")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Files opened internally in libcamera without the O_CLOEXEC file will
remain open upon a call to one of the exec(3) functions. As exec()
doesn't destroy local or global objects, this can lead to various side
effects. Avoid this by opening file descriptors with O_CLOEXEC for all
internal files.
The O_CLOEXEC flag should also be set when obtaining file handles from
the V4L2 VIDIOC_EXPBUF operation, but was missed during the updates to
both d942bdc913c5 ("libcamera: v4l2_device: openat(2) with O_CLOEXEC to
cleanup after exec(3)") and 436b38fd89fe ("libcamera: Open files with
O_CLOEXEC").
Set the O_CLOEXEC flag on calls to ioctl(VIDIOC_EXPBUF).
Fixes: 436b38fd89fe ("libcamera: Open files with O_CLOEXEC")
Signed-off-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the v4l2-compat.so shared library installation to the libcamera
directory under libexec. This is the same location that the proxy
workers live and will facilitate easier packaging of the V4L2
compatibility layer with distributions.
Create a new libcamera_libexecdir variable within meson to simplify
representation of this path and update the proxy worker meson.build
infrastructure to make use of it as well.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a flags_ field to indicate stream state information in RPi::Stream.
This replaces the existing external_ and importOnly_ boolean flags.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new PipelineHandlerBase class that handles general purpose
housekeeping duties for the Raspberry Pi pipeline handler. Code the
implementation of new class is essentially pulled from the existing
pipeline/rpi/vc4/raspberrypi.cpp file with a small amount of
refactoring.
Create a derived PipelineHandlerVc4 class from PipelineHandlerBase that
handles the VC4 pipeline specific tasks of the pipeline handler. Again,
code for this class implementation is taken from the existing
pipeline/rpi/vc4/raspberrypi.cpp with a small amount of
refactoring.
The goal of this change is to allow third parties to implement their own
pipeline handlers running on the Raspberry Pi without duplicating all of
the pipeline handler housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Return a const std::string reference from RPi::Stream::name() to avoid
copying a string when not needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The region weights for the the AGC zones are handled by the AGC
algorithm. Apply them directly in the IPA (vc4.cpp) to the statistics
that we pass to the AGC.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new IpaBase class that handles general purpose housekeeping
duties for the Raspberry Pi IPA. The implementation of the new class
is essentially pulled from the existing ipa/rpi/vc4/raspberrypi.cpp file
with a minimal amount of refactoring.
Create a derived IpaVc4 class from IpaBase that handles the VC4 pipeline
specific tasks of the IPA. Again, code for this class implementation is
taken from the existing ipa/rpi/vc4/raspberrypi.cpp with a
minimal amount of refactoring.
The goal of this change is to allow third parties to implement their own
IPA running on the Raspberry Pi without duplicating all of the IPA
housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Restructure the IPA mojom interface to be more consistent in the use
of the API. Function parameters are now grouped into *Params structures
and results are now returned in *Results structures.
The following pipeline -> IPA interfaces have been removed:
signalQueueRequest(libcamera.ControlList controls);
signalIspPrepare(ISPConfig data);
signalStatReady(uint32 bufferId, uint32 ipaContext);
and replaced with:
prepareIsp(PrepareParams params);
processStats(ProcessParams params);
signalQueueRequest() is now encompassed within prepareIsp().
The following IPA -> pipeline interfaces have been removed:
runIsp(uint32 bufferId);
embeddedComplete(uint32 bufferId);
statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls);
and replaced with the following async calls:
prepareIspComplete(BufferIds buffers);
processStatsComplete(BufferIds buffers);
metadataReady(libcamera.ControlList metadata);
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
At present, the RPiStream buffer ids == -1 indicates an invalid value.
As a simplification, use id == 0 to indicate an invalid value. This
allows for better code readability.
As a consequence of this, use unsigned int for the buffer id values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current pipeline handler build files require a flat directory
struture for each pipeline handler. Modify the build files to remove
this restriction and allow a directory structure such as:
src/libcamera/pipeline/
|- raspberrypi
|- common
|- vc4
|- rkisp1
|- ipu3
where each subdir (e.g. raspberrypi/common, raspberrypi/vc4) has its own
meson.build file. Such a directory structure will be introduced for the
Raspberry Pi pipeline handler in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current IPA build files require a flat directory structure for the
IPAs. Modify the build files to remove this restriction and allow a
directory structure such as:
src/ipa
|- raspberrypi
|- common
|- cam_helpers
|- controller
|- vc4
|- rkisp1
|- ipu3
where each subdir (e.g. raspberrypi/common, raspberrypi/cam_helper) has
its own meson.build file. Such a directory structure will be introduced
for the Raspberry Pi IPA in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the restriction on using the '/' character in the IPA name
string. This allows more flexibility in IPA directory structures where
different IPA modules might live in subdirectories under the usual
src/ipa/<platform>/ top level directory.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The switch statement checks `roles.size()` with cases for 1 and 2,
so in the `default` branch, `role.size() > 2`, i.e. it is always
different from 1, so the check is unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The STM32 contains a camera pipeline known as the DCMIPP (Digital
Camera-Memory Interface Pixel Processor) which receives data from a
parallel interface and dumps the post-processed data to memory. The
pipeline is capable of some processing in the form of downscaling
captured data through cropping or skipping the sensor's output.
The simple pipeline handler is quite capable of handling the DCMIPP
given its operation is handled entirely through configuring the pads
of a media graph, so add support for the driver to the pipeline's
supportedDevices array.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A new warning has been introduced to gcc-13 that produces a false
positive on the cam file sink object:
src/cam/file_sink.cpp:92:45: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i];
| ^~~~
src/cam/file_sink.cpp:92:81: note: the temporary was destroyed at the end of the full expression '(& buffer->libcamera::FrameBuffer::metadata())->libcamera::FrameMetadata::planes().libcamera::Span<const libcamera::FrameMetadata::Plane>::operator[](i)'
92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i];
| ^
cc1plus: all warnings being treated as errors
Workaround this issue by refactoring the code to take a local const
copy of the bytesused value, rather than a local const reference to the
plane.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=185
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107532
Co-developed-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Commit and comment reworded prior to merge]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the imx258 and ov8858
sensors found on Pine64 PinephonePro devices.
The tuning file contain LSC tables extracted from the Rockchip Android
BSP the PinephonePro ships with.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the ov2685 and ov5695
sensor found on Google DRU "Scarlett" tablet.
The tuning files contain LSC tables extracted from the Google Chrome
Android HAL configuration files, available at
src/overlays/overlay-scarlet/media-libs/cros-camera-hal-configs-scarlet/files/IQ/
at revision "stabilize-14790.B".
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Just like we do for other pipeline handlers already.
This ensures we corretly pass on transforms that are not handled by the
sensor - e.g. rotations - back to the app via the config, which is
required on devices like the Pinephone.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Tested-by: Arnav Singh <me@arnavion.dev>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the media bus code selection procedure does not depend
on the ISICameraConfiguration::formatsMap_ remove the association
between PixelFormat supported by the ISI and the media bus code produced
by the sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
At generateConfiguration() a YUV/RGB pixel format is preferred for the
StillCapture/VideoRecording/Viewfinder roles, but currently there are no
guarantees in place that the sensor provides a non-Bayer bus format from
which YUV/RGB can be generated.
This makes the default configuration generated for those roles not to
work if the sensor is a RAW-only one.
To improve the situation split the configuration generation in two,
one for YUV modes and one for Raw Bayer mode.
StreamRoles assigned to a YUV mode will try to first generate a YUV
configuration and then fallback to RAW if that's what the sensor can
provide.
As an additional requirement, for YUV streams, the generated mode has to
be validated with the sensor to confirm the desired sizes can be
generated as the ISI cannot up-scale. In order to test a format use the
newly introduced CameraSensor::tryFormat().
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a function to the CameraSensor class that allows to test a format
without applying it to the subdevice and without modifying any control
value associated with the camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ISICameraConfiguration::validate() function selects which media
bus format to configure the sensor with based on the pixel format
of the first configured stream using the media bus code associated to it
in the formatsMap_ map.
In order to remove the PixelFormamt-to-mbus-code association in
formatsMap_ provide a wrapper function for the newly introduced
getRawMediaBusFormat() and getYuvMediaBusFormat() that automatically
selects what media bus format to use based on the first stream pixel
format.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As per the RAW format selection, the media bus format selection
procedure relies on the direct association of PixelFormat and media
bus code in the formatsMap_ map.
As the ISI can generate YUV and RGB formats from any non-Bayer media
bus format, break out the YUV/RGB media bus format selection to a
separate function.
The newly introduced getYuvMediaBusFormat() tests a list of
known-supported media bus formats against the list of media bus
formats supported by the sensor and tries to prefer media bus
codes with the same encoding as the requested PixelFormat.
Use the newly introduced function in
ISICameraConfiguration::validateYuv() to make sure the sensor can
produce a YUV/RGB media bus format.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current implementation of the ISI pipeline handler handles
translation of PixelFormat to media bus formats from the sensor
through a centralized map.
As the criteria to select the correct media bus code depends on if the
output PixelFormat is a RAW Bayer format or not, start by splitting
the RAW media bus code procedure selection out by adding a function
for such purpose to the ISICameraData class.
Add the function to the ISICameraData and not to the
ISICameraConfiguration because:
- The sensor is a property of CameraData
- The same function will be re-used by the ISIPipelineHandler
during CameraConfiguration generation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no need to wrap DRM::AtomicRequest in std::unique_ptr<>
in KMSSink::start(). Remove it so that the syntax becomes similar to
what we have in KMSSink::stop().
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's possible to construct a Camera with an unsafe controlInfo_.
This is the case in the Simple pipeline, where the camera controls are
not populated.
With Simple, if we attempt to set a Control, we end up with a segfault
because the default constructor for ControlInfoMap doesn't
intialized idmap_ which is initialized at class declaration time as
const ControlIdMap *idmap_ = nullptr;
Add some safeguards in ControlInfoMap to handle this case.
Link: https://lists.libcamera.org/pipermail/libcamera-devel/2023-April/037439.html
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In `udevNotify()`, constructing an std::string from the device's
associated action is unnecessary as it is only compared against static
strings, and for that purpose an std::string_view works just as well,
while being cheaper to construct.
In the same vein, an std::string_view can be used to store the device's
devnode initially, and the string construction can be deferred until it
is needed.
Furthermore, previously `udev_device_get_devnode()` was called twice.
The extra call is now removed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add formats definition and mappings for 14-bits Bayer RAW formats.
Add definitions for non-packed and CSI-2 packed variants.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Previously, after `addV4L2Device()` had seen all dependecies, it would
remove the `MediaDeviceDeps` object from the `pending_` list, which
would result in it being destroyed. However, there would still be
(dangling) pointers to this object in `devMap_` that were added in
`addUdevDevice()` (line 103). So remove the entry with the given devnum
when it is removed from the corresponding `MediaDeviceDeps` object.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
