summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-09libcamera: pipeline: raspberrypi: Use LGPL-2.1 licenseNaushir Patuck
Swap the pipeline handler to use "LGPL-2.1-or-later" license. This is to unify with the libcamera core source code license. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09qcam: Fix compilation with Qt v5.15.0Peter Seiderer
Starting from Qt v5.15.0, the QTextStreamFunctions::fixed function used to configure formatting on QTextStream is deprecated in favour of Qt::fixed. This causes a compilation error: ../src/qcam/main_window.cpp:634:16: error: ‘QTextStream& QTextStreamFunctions::fixed(QTextStream&)’ is deprecated: Use Qt::fixed [-Werror=deprecated-declarations] 634 | << "fps:" << fixed << qSetRealNumberPrecision(2) << fps; | ^~~~~ Fix it by using Qt::fixed, and provide backward compatibility with Qt versions older than v5.14.0 that didn't provide Qt::fixed. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # 5.12.8 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09v4l2: v4l2_camera_proxy: Support MJPEGPaul Elder
Add an entry for MJPEG in V4L2CameraProxy's PixelFormatInfo list to allow proper calculation of sizeimage for MJPEG, such that the parameters to mmap can align properly instead of failing. This allows MJPEG to be used in the V4L2 compatibility layer. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09libcamera: CameraManager, PipelineHandler: Automatically map devnums to CameraPaul Elder
The V4L2 compatibility layer uses devnum to match video device nodes to libcamera Cameras. Some pipeline handlers don't report a devnum for their camera, which prevents the V4L2 compatibility layer from matching video device nodes to these cameras. To fix this, we first allow the camera manager to map multiple devnums to a camera. Next, we walk the media device and entity list and tell the camera manager to map every one of these devnums that is a video capture node to the camera. Since we decided that all video capture nodes that belong to a camera can be opened via the V4L2 compatibility layer to map to that camera, it would cause confusion for users if some pipeline handlers decided that only specific device nodes would map to the camera. To prevent this confusion, remove the ability for pipeline handlers to declare their own devnum-to-camera mapping. The only pipeline handler that declares the devnum mapping is the UVC pipeline handler, so remove the devnum there. We considered walking the media entity list and taking the devnum from just the one with the default flag set, but we found that some drivers (eg. vimc) don't set this flag for any entity. Instead, we take all the video capture nodes (entities with the sink pad flag set). Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-08android: camera_device: Translate Android formatJacopo Mondi
Translate the Android format code to the libcamera format code at stream configuration time, using the translation map built at camera device initialization time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-08android: camera_device: Replace hardcoded stream configurationJacopo Mondi
Replace the hardcoded stream configuration map with the information collected at CameraDevice initialization time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-08android: camera_device: Calculate metadata sizeJacopo Mondi
As we move to have more and more dynamically generated static metadata entries, the size of the metadata buffer has to be calculated dynamically inspecting the information collected from the camera. Provide a method to perform metadata buffers size calculation and use it when generating camera static metadata. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-08android: camera_device: Initialize stream configurationJacopo Mondi
Initialize the stream configuration map by applying the Android Camera3 requested resolutions and formats to the libcamera Camera device. For each required format test a list of required and optional resolutions, construct a map to translate from Android format to the libcamera formats and store the available stream configuration to be provided to the Android framework through static metadata. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-08v4l2: v4l2_camera_proxy: Fix NV24 subsamplingKieran Bingham
The NV24 pixelFormatInfo table entry defines an incorrect horizontal sub-sampling. Update to the correct value. Fixes: 29c5508075c1 ("v4l2: camera_proxy: Create format info array") Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-08v4l2: v4l2_camera_proxy: Fix segfault on restarting streamsPaul Elder
The V4L2 compatibility layer keeps track of the index of the next buffer to be dequeued, to handle VIDIOC_DQBUF. This index is set to 0 on startup and incremented (modulo #frames), and is otherwise never reset. This means that if the last handled frame index is not #frames-1, and the stream is restarted without restarting libcamera and the V4L2 compatilibity layer, the buffer index number won't match with the libcamera buffer index number, causing a segfault. Fix this by resetting the current buffer index to zero on VIDIOC_STREAMON. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-08v4l2: v4l2_compat: Add eventfd signaling to support pollingPaul Elder
To support polling, we need to be able to signal when data is available to be read (POLLIN), as well as events (POLLPRI). Add the necessary calls to eventfd to allow signaling POLLIN. We signal POLLIN by writing writing to the eventfd, and clear it by reading from the eventfd, upon VIDIOC_DQBUF. Note that eventfd does not support signaling POLLPRI, so we don't yet support V4L2 events. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-08v4l2: v4l2_camera_proxy: Don't return -EINVAL for zero sizeimage in REQBUFSPaul Elder
If VIDIOC_REQBUFS returns -EINVAL, it signals to the application that the requested buffer or memory type is not supported. If we return -EINVAL due to a zero sizeimage, then the application will think that we don't support a memory type that we actually do. We cannot error on a zero sizeimage, because reqbufs could be called merely to probe what IO methods we support; qv4l2, for example, called reqbufs once with userptr and once more with mmap, both times with count=1. On the other hand, sizeimage will be zero for formats whose size we don't know how to calculate, such as MJPEG. If we try to stream such formats anyway, we will get a floating point exception and crash. Issue a warning for now, and don't return -EINVAL, so that we can continue operation. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-08v4l2: v4l2_camera_proxy: Acquire only one buffer semaphore on VIDIOC_DQBUFPaul Elder
We use a semaphore to atomically keep track of how many buffers are available for dequeueing. The check for how to acquire the semaphore was incorrect, leading to a double acquire upon a successful nonblocking acquire. Fix this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-08v4l2: v4l2_camera_proxy: Fix bounds check for VIDIOC_ENUM_FMTPaul Elder
VIDIOC_ENUM_FMT is meant to return -EINVAL if the requested index is out of bounds. This bounds is obtained from the libcamera Camera's list of formats. The bounds check for this list was incorrect; fix it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-08libcamera: IPAManager: remove instance() and make createIPA() staticPaul Elder
As the only usage of IPAManager::instance() is by the pipeline handlers to call IPAManager::createIPA(), remove the former and make the latter static. Update the pipeline handlers and tests accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-08libcamera: IPAManager: make IPAManager lifetime explicitly managedPaul Elder
If any ipa_context instances are destroyed after the IPAManager is destroyed, then a segfault will occur, since the modules have been unloaded by the IPAManager and the context function pointers have been freed. Fix this by making the lifetime of the IPAManager explicit, and make the CameraManager construct and deconstruct (automatically, via a unique pointer) the IPAManager. Also update the IPA interface test to do the construction and deconstruction of the IPAManager, as it does not use the CameraManager. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-07libcamera: ipa_module: Fix implicit sign-extension in elfSectionUmang Jain
Given how the elfSection() function uses the sub-expression (idx * eHdr->e_shentsize) it has effectively two (16 bits, unsigned) operands. The sub-expression is promoted to type int (32 bits, signed) for multiplication and then added to eHdr->e_shoff, which is uint32_t on 32-bit platforms and uint64_t on 64-bit platforms. Since eHdr->e_shoff is unsigned, the integer conversion rules dictate that the other signed operand (i.e. the result of aforementioned sub-expression) will be converted to unsigned type too. This causes sign-extension for both of the above operands to match eHdr->e_shoff's type and should be avoided. The solution is to explicitly cast one of the operands of the sub-expression with unsigned int type. Hence, the other operand will be integer promoted and the resultant will also be of unsigned int type, not requiring to bother about a sign-extension. Reported-by: Coverity CID=280008 Reported-by: Coverity CID=280009 Reported-by: Coverity CID=280010 Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-07libcamera: ipa_module: Share code to find section header of ELF headerUmang Jain
Refactor the code to find section into a common helper function. This commit introduces no functional changes. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-06libcamera: pixel_format: Make PixelFormat usable as a constexprLaurent Pinchart
The PixelFormat class is a lightweight wrapper around a 32-bit FourCC and a 64-bit modifier. Make is usable as a constexpr. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-06libcamera: Rename pixelformats.{cpp,h} to pixel_format.{cpp,h}Laurent Pinchart
The libcamera source files are named after class names, using snake_case. pixelformats.h and pixelformats.cpp don't comply with that rule. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-05libcamera: raspberrypi: Align include guardNiklas Söderlund
The preprocessor directive '#pragma once' is non-standard, replace it with the include guard used elsewhere in libcamera. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-05libcamera: ipa_context_wrapper: Fix typo in commentsPaul Elder
Fix a typo in a comment in ipa_context_wrapper.cpp. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-05libcamera: camera: Order parameter documentation correctlyMarvin Schmidt
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-05libcamera: ipa_module: Fix typo in function descriptionMarvin Schmidt
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-04libcamera: pipeline: vimc: Remove unsupportable formatKieran Bingham
The DRM(BGRA8888)/V4L2(ARGB8888) format is not supportable by the current configurations of VIMC. Remove it from the list of supported configurations. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-04libcamera: pipeline: vimc: Skip unsupported formatsKieran Bingham
Older kernels do not support all 'reported' formats. Skip them on those kernels. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-04libcamera: camera: Return -EINVAL if any stream is null while configure()Umang Jain
Fail and return the Camera::configure() operation if any of the stream turns out to be a nullptr even after the PipelineHandler handler seems to have configured the config successfully. This prevents a null-dereference below in the loop. Reported-by: Coverity CID=279069 Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-04pipeline: raspberrypi: Fix for staggered write on resetNaushir Patuck
The reset function in staggered write was using the wrong index when looking for the last updated camera parameters. This would cause possibly stale exposure values to be written to the camera on a mode switch for captures. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-04libcamera: pipeline: vimc: Use appropriate media bus formatLaurent Pinchart
Pick the correct media bus format based on the video pixel format on the capture node. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-04libcamera: camera: Drop full stop from \returnJacopo Mondi
We don't use full stops at the end of \return directives in Doxygen documentation. Drop it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-04android: hal_manager: Do not hardcode propertiesJacopo Mondi
The CameraHalManager::getCameraInfo() method hardcodes the camera facing side and orientation (which corresponds, confusingly, to libcamera's location and rotation properties). Instead of hard-coding the values based on the camera id, inspect the libcamera properties that report the camera location and rotation in a new initialize() method, and use them to report the android camera info and to populate the static metadata buffer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-04android: hal_manager: Report supported API versionJacopo Mondi
Report the supported API version in the camera_info structure provided to the framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-04android: camera_device: Provide log prefixJacopo Mondi
Make the CameraDevice a Loggable subclass and provide a logPrefix() method to identify which camera the log output refers to. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-28qcam: viewfinder: Use correct DRM/QImage mappingsKieran Bingham
When the native pixel formats supported by QT were introduced, the RGB/BGR formats were inverted. Swap the BGR888 and RGB888 mappings accordingly. Fixes: f890a57b7a06 ("qcam: viewfinder: Add support for more native formats") Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-28v4l2: Relicense V4L2 compatibility layer under LGPLLaurent Pinchart
The V4L2 compatibility layer is licensed under the GPL. It is compiled as a binary separate from libcamera.so, and is loaded into the address space of processes through LD_PRELOAD to intercept calls to the C library. It is our understanding and intent that the GPL license doesn't propagate to the binaries whose calls are intercepted, considering those binaries are not derivative work of the V4L2 compatibility layer and are not designed to be linked to the V4L2 compatibility layer. There is however a possibly grey area if binaries are packaged with a shell script wrapper that loads the V4L2 compatibility layer. This could lead to license-related issues if such packaging is performed by Linux distributions or system integrators. To clarify the intent and lift the doubts, relicense the V4L2 compatibility layer under the LGPL. The V4L2 compatibility layer code itself still benefits from the license protection, while its usage with third-party binaries is clearly allowed as intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2020-05-22libcamera: pipeline: simple: Add scaling supportLaurent Pinchart
Use the converter to implement scaling. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-22libcamera: pipeline: simple: converter: Add scaling supportLaurent Pinchart
Extend the SimpleConverter to support scaling, with reporting of the minimum and maximum output sizes supported for a given input size. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-22libcamera: pipeline: simple: Add stride supportLaurent Pinchart
Report the stride when configuring the camera. The stride is retrieved from the capture device first, and overridden by the converter if used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-21libcamera: raspberry: Fix segfault in ~RPiCameraData()Jacopo Mondi
The RPiCameraData class destructor tries to stop its ipa_ instance without making sure it has been initialized. If the RPiCameraData gets destroyed before its ipa_ member is initialized, for example if the sensor initialization fails during the match() function, a nullptr dereference segfault is triggered preventing a graceful library teardown. Fix this by checking for ipa_ to be initialized before stopping it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-21libcamera: camera_sensor: Update properties parsingJacopo Mondi
Update the properties parsing routine in the CameraSensor class to use the newly defined V4L2 control V4L2_CID_CAMERA_ORIENTATION in place of the downstream V4L2_CID_CAMERA_SENSOR_LOCATION which has now been removed. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-19libcamera: v4l2_videodevice: Use FileDescriptor "fd move" constructorLaurent Pinchart
Use the newly added "fd move" constructor of the FileDescriptor class to avoid dup() + close(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-05-19libcamera: file_descriptor: Implement move semantics for constructorLaurent Pinchart
The FileDescriptor class, when constructed from a numerical file descriptor, duplicates the file descriptor and takes ownership of the copy. The caller has to close the original file descriptor manually if needed. This is inefficient as the dup() and close() calls could be avoided, but can also lead to resource leakage, as recently shown by commit 353fc4c22322 ("libcamera: v4l2_videodevice: Fix dangling file descriptor"). In an attempt to solve this problem, implement move semantics for the FileDescriptor constructor. The constructor taking a numerical file descriptor is split in two variants: - A "fd copy" constructor that takes a const lvalue reference to a numerical file descriptor and duplicates it (corresponding to the current behaviour). - A "fd move" constructor that takes a rvalue reference to a numerical file descriptor and takes ownership of it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-05-18(q)cam: Fix header guardsLaurent Pinchart
Several headers belonging to cam and qcam use __LIBCAMERA_*_H__ as a header guard. They're not part of the libcamera core, use __CAM_*_H__ and __QCAM_*_H__ instead, similarly to all other headers of cam and qcam. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-05-18libcamera: v4l2_videodevice: Fix dangling file descriptorNaushir Patuck
The FileDescriptor constructor used in V4L2VideoDevice::exportDmabufFd() creates a duplicate of the fd to store in the object. The original fd returned by the VIDIOC_EXPBUF ioctl was never closed, and left dangling. This would cause out of memory conditions if the camera stream was repeatedly started and stopped. This change closes the original fd explicitly, fixing the leak. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-18meson: Rename variables storing headers listsLaurent Pinchart
The list of public, IPA and internal header files are stored in three meson variables, named libcamera_api, libcamera_ipa_api and libcamera_headers respectively. The lack of uniformity is a bit confusing. Fix it by renaming those variables to libcamera_public_headers, libcamera_ipa_headers and libcamera_internal_headers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-05-16libcamera: Move IPA headers from include/ipa/ to include/libcamera/ipa/Laurent Pinchart
The IPA headers are installed into $prefix/include/libcamera/ipa/, but are located in the source tree in include/ipa/. This requires files within libcamera to include them with #include <ipa/foo.h> while a third party IPA would need to use #include <libcamera/ipa/foo.h> Not only is this inconsistent, it can create issues later if IPA headers need to include each other, as the first form of include directive wouldn't be valid once the headers are installed. Fix the problem by moving the IPA headers to include/libcamera/ipa/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move internal headers to include/libcamera/internal/Laurent Pinchart
The libcamera internal headers are located in src/libcamera/include/. The directory is added to the compiler headers search path with a meson include_directories() directive, and internal headers are included with (e.g. for the internal semaphore.h header) #include "semaphore.h" All was well, until libcxx decided to implement the C++20 synchronization library. The __threading_support header gained a #include <semaphore.h> to include the pthread's semaphore support. As include_directories() adds src/libcamera/include/ to the compiler search path with -I, the internal semaphore.h is included instead of the pthread version. Needless to say, the compiler isn't happy. Three options have been considered to fix this issue: - Use -iquote instead of -I. The -iquote option instructs gcc to only consider the header search path for headers included with the "" version. Meson unfortunately doesn't support this option. - Rename the internal semaphore.h header. This was deemed to be the beginning of a long whack-a-mole game, where namespace clashes with system libraries would appear over time (possibly dependent on particular system configurations) and would need to be constantly fixed. - Move the internal headers to another directory to create a unique namespace through path components. This causes lots of churn in all the existing source files through the all project. The first option would be best, but isn't available to us due to missing support in meson. Even if -iquote support was added, we would need to fix the problem before a new version of meson containing the required support would be released. The third option is thus the only practical solution available. Bite the bullet, and do it, moving headers to include/libcamera/internal/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-15libcamera: pipeline: raspberrypi: Move StaggeredCtrl to libcamera namespaceLaurent Pinchart
The StaggeredCtrl class, part of the Raspberry Pi pipeline handler, is part of libcamera. Move it to the libcamera namespace to simplify usage of libcamera APIs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-05-15libcamera: pipeline: raspberrypi: Don't inline all of StaggeredCtrlLaurent Pinchart
The StaggeredCtrl class has large functions, move them to a .cpp file instead of inlining them all to reduce the binary size. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-05-13ipa: Only sign IPA modules that are being installedLaurent Pinchart
The ipa-sign-install.sh script, run when installing libcamera, signs all IPA modules present in the module directory. This would result in third-party modules being signed if any are present in the directory. Fix it by explicitly passing the list of IPA modules to the ipa-sign-install.sh script. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org>