summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-07-04gstreamer: Rename queued requests queue to queuedRequests_Laurent Pinchart
To prepare for the addition of a completed requests queue, rename the existing queued requests queue from requests_ to queuedRequests_. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Move timestamp calculation out of pad loopLaurent Pinchart
The buffer pts and the pad latency are computed from the framebuffer timestamp, separately for each pad. Use the sensor timestamp provided through the request metadata instead, to compute the values once outside of the pads loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Pass Stream to RequestWrap::addBuffer()Laurent Pinchart
For symmetry with RequestWrap::removeBuffer(), pass the Stream pointer to addBuffer(). This handles streams at the GstPad level instead of the GstBuffer level, which allows making the GstLibcameraPool API a bit cleaner by removing the gst_libcamera_buffer_get_stream() helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Move variable to loop scopeLaurent Pinchart
The GstBuffer variable in GstLibcameraSrcState::requestCompleted() is only used within the loop scope. Make it a local loop variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Use gst_task_resume() when availableLaurent Pinchart
The gst_libcamera_resume_task() helper is an implementation of the gst_task_resume() function that predates its addition to GStreamer. Use gst_task_resume() when available, and rename gst_libcamera_resume_task() to gst_task_resume() to support older GStreamer versions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
2022-06-29ipa: rkisp1: Add support of Black Level Correction tuningFlorian Sylvestre
Get the Black Level Correction algorithm parameters from YAML tuning data. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Add OV5640 tuning fileFlorian Sylvestre
Add the OV5640 tuning file containing default values for 'black level correction' algorithm. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Add IMX219 tuning fileLaurent Pinchart
Add a skeleton for the IMX219 tuning file, with data for the BLC algorithm. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: rkisp1: Add YAML tuning file supportFlorian Sylvestre
Retrieve root node in YAML tuning file and provide to each algorithm this YamlObject to allow them to grab their default parameters by calling init() function. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Register algorithmsLaurent Pinchart
To prepare for dynamic instantiation of algorithms from the tuning file, register the algorithms with the Module class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29pipeline: rkisp1: Support IPA tuning fileFlorian Sylvestre
Pass the path name of the YAML IPA tuning file to the IPA module. The file name is derived from the sensor name ("${sensor_name}.yaml"), with a fallback to "uncalibrated.yaml". The tuning file name can be manually overridden with the LIBCAMERA_RKISP1_TUNING_FILE environment variable. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: libipa: module: Make the Module class LoggableLaurent Pinchart
To help attribute messages logged by the Module class to a particular IPA module, make the class loggable. The logPrefix() function must be implemented by the IPA module-specific derived class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: module: Add support for instantiation from YAMLLaurent Pinchart
Add a Module::createAlgorithms() function to instantiate algorithms from a YamlObject. The instantiated algorithms are stored in a private member variable list, exposed through the Module::algorithms() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: algorithm: Add init() function to the Algorithm classFlorian Sylvestre
Add the init() function that will be called during algorithm initialization to provide each algorithm the list of algorithms tuning data. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: libipa: algorithm: Add an algorithm registration mechanismLaurent Pinchart
In order to allow dynamic instantiation of algorithms based on tuning data files, add a mechanism to register algorithms with the IPA module. The implementation relies on an AlgorithmFactory class and a registration macro, similar to the pipeline handler registration mechanism. The main difference is that the algorithm registration and instantiation are implemented in the Module class instead of the AlgorithmFactory class, making the factory an internal implementation detail. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: Move ipa namespace documentation to module.cppLaurent Pinchart
The libipa.cpp file exists for the sole purpose of documentating the ipa namespace. As we now have a top-level module.cpp file in libipa, move the documentation there, and drop libipa.cpp. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: Introduce a Module class templateLaurent Pinchart
libipa defines an abstract Algorithm class template that is specialized by IPA modules. IPA modules then instantiate and manage algorithms internally, without help from libipa. With ongoing work on tuning data support for the RkISP1, and future similar work for the IPU3, more code duplication for algorithms management is expected. To address this and share code between multiple IPA modules, introduce a new Module class template that will define and manage top-level concepts for the IPA module. The Module class template needs to be specialized with the same types as the Algorithm class. To avoid manual specialization of both classes, store the types in the Module class, and replace the template arguments of the Algorithm class with a single Module argument from which the other types are retrieved. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29pipeline: raspberrypi: Advertise ScalerCrop from the pipeline handlerNaushir Patuck
The ScalerCrop control is handled directly by the pipeline handler. Remove the control from the IPA's static ControlInfoMap, and let the pipeline handler add it to the ControlInfoMap advertised to the application, ensuring the limits are set appropriately based on the current sensor mode. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Correctly report available control limitsNaushir Patuck
The ipa currently advertises a static ControlInfoMap to specify the available controls and their limits. Fix this limitation by having the IPA populate a new ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and FrameDurationLimits controls based on the current sensor mode. This new ControlInfoMap is then returned back to the pipeline handler and available to the application after a successful Camera::configure() call. Before the first call to Camera::configure(), this ControlInfoMap provides some reasonable default limits for ExposureTime, AnalogueGain, and FrameDurationLimits. However, applications must not rely on these values, but obtain the correct limits after the call to Camera::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Move ControlInfoMap to the IPANaushir Patuck
Currently the pipeline handler advertises controls handled by the IPA from a static ControlInfoMap defined in the raspberrypi.h header. This change removes this header file, and instead the IPA returns the ControlInfoMap to the pipeline handler from the ipa::init() function. This is done to allow the IPA to adjust the limits of the controls based on the sensor mode in a subsequent change. Bug: https://bugs.libcamera.org/show_bug.cgi?id=83 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Use std::optional in DeviceStatusNaushir Patuck
Switch the aperture, lens_position, and flash_intensity fields in the DeviceStatus structure to use std::optional instead of using invalid default values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: imx477: Get sensor temperature from embedded dataNaushir Patuck
Fetch the sensor temperature value from the embedded data buffer and add it to the DeviceStatus structure in CamHelperImx477::PopulateMetadata(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Add sensor temperature to DeviceStatusNaushir Patuck
Add an optional sensor_temperature field to the DeviceStatus structure. If a temperature measurement is available for a frame, the value is returned out through the SensorTemperature control in the Request metadata. Additionally, provide the sensor temperature value from the std::ostream &operator<< overload. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29libcamera: controls: Add SensorTemperature controlNaushir Patuck
Add a SensorTemperature control to return the temperature of the camera sensor in Celsius. This control will only be present in the Request metadata if a thermal sensor is available to the camera sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-27libcamera: v4l2_videodevice: Identify non-zero stream startsKieran Bingham
V4L2 Video devices should always start streaming from index zero. Identify and report a warning if they don't, and correct for any offset. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-20cam: kms_sink: Remove limitation that camera and display must matchEric Curtin
There is a limitation that requires input and output to be pixel for pixel identical in terms of height and width. Remove this limitation to enable more hardware that doesn't match. Just start drawing from top left 0, 0 corner. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com>
2022-06-20libcamera: yaml_parser: Add get() specializations for 16-bit integersLaurent Pinchart
Extend the YamlObject::get() function template to support 16-bit integers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Fix range checks for 32-bit integersLaurent Pinchart
The strtol() and strtoul() functions return long integers, which may be larger than 32-bit integers. Add manual range checks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Remove memberNames() functionLaurent Pinchart
Now that YamlObject supports iteration, the memberNames() function isn't useful anymore as it can be implemented using utils::map_keys() if really needed. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20android: Use the YamlObject iterator APILaurent Pinchart
Replace usage of YamlObject::memberNames() with the more efficient iterator API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Add iterator APILaurent Pinchart
Allow using range-based for loops over YamlObject instances by implementing iterators. New YamlObject::DictAdapter and YamlObject::ListAdapter adapter classes are introduced to provide different iterators depending on the object type. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-19cam: drm: Support /dev/dri cards other than 0Eric Curtin
Existing code is hardcoded to card0. Since recent fedora upgrades, we have noticed on more than one machine that card1 is present as the lowest numbered device, could theoretically be higher. This technique tries every file starting with card and continue only when we have successfully opened one. These devices with card1 as the lowest device were simply failing when they do not see a /dev/dri/card0 file present. Reported-by: Ian Mullins <imullins@redhat.com> Tested-by: Ian Mullins <imullins@redhat.com> Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-18ipa: ipu3: awb: Correct the gains calculationJean-Michel Hautbois
The factor used right now in the IPU3 is 8192, as a multiplier of the estimated gain. This is wrong, as the isp is adding 1.0 to the gain applied, ie Pout = { Pin * (1 + Gx) }. Fix it, and to ease the reading, introduce a small helper function. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: pipeline: simple: Support scaling on the sensorLaurent Pinchart
As the simple pipeline handler targets simple pipelines on the SoC side, it often gets used with platforms that have a YUV sensor capable of outputting different sizes. Extend the heuristics used for pipeline discovery and configuration to scale as much as possible on the sensor side, in order to minimize the required bandwidth. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: pipeline: simple: Store sensor resolution in configurationLaurent Pinchart
When enumerating the supported configurations, store the corresponding sensor resolution in the SimpleCameraData::Configuration structure and use it when configuring the camera, instead of hardcoding the sensor full resolution. This prepares for support of downscaling in the camera sensor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: pipeline: simple: Factor out format test to separate functionLaurent Pinchart
To prepare for the implementation of a more complex format discovery method, factor out code that tries a pipeline configuration to a separate function. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: pipeline: simple: Document the pipeline traversal algorithmLaurent Pinchart
Add a section to the documentation at the top of the file to describe in a bit more details how the media graph is traversed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: pipeline: simple: Improve debug message on config failureLaurent Pinchart
When pipeline configuration fails, print the format returned by the kernel in addition to the one requested by libcamera, to ease debugging. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-16libcamera: yaml_parser: Switch from FILE to FileLaurent Pinchart
THe FILE object isn't very user-friendly as it requires manual close. Replace it with File to provide RAII-style resource management in the YamlParser API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-16libcamera: yaml_parser: Extend YamlObject::size() to dictionariesLaurent Pinchart
Dictionaries have a size too, extend the size() function to support them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-16libcamera: yaml_object: Turn Type into an enum classLaurent Pinchart
Turn the Type enum into an enum class to force qualifying 'List' and 'Dictionary' in the YamlObject namespace scope. This will help avoiding ambiguities when adding iterator support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-10android: camera_device: Print the correct number of completed streamsJacopo Mondi
When a request completes, a debug message is generated to help identify the request and the number of streams it contains. The printed number of streams is however the number of output buffers requested by the camera framework, not the number of streams generated by libcamera. In facts, some output buffers are generated by post-processing, and not directly from the camera. As the debug message prints the libcamera identifier for the Request, it is more logical to print the number of streams generated by the camera instead of the total number of streams. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-10android: camera_device: Use YUV post-processorHirokazu Honda
When creating the list of StreamConfiguration to be requested to the camera, map NV12 streams of equal size and format together, so that they will be generated by using the YUV post-processor. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-10android: camera_device: Postpone mapped streams handlingJacopo Mondi
Mapped streams are generated by post-processing and always require a source buffer to process image data from. In case a Mapped stream is requested but its source stream is not, it is required to allocate a buffer on the fly and add it to the libcamera::Request. Make sure a source stream is available for all mapped streams, and if that's not the case, add a dedicated buffer to the request for that purpose. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-10android: camera_stream: Create allocator unconditionallyJacopo Mondi
Originally buffer allocation was only required for Internal streams which are not backed by a frame buffer provided by the Android framework. Now that mapped streams can be generated without the corresponding source stream being part of the Android's provided stream list, also buffers of type Mapped can be required to allocate buffers on demand. Create CameraStream::allocator_ and the associated mutex unconditionally for all types of stream. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-10android: camera_stream: Add sourceStreamHirokazu Honda
Add a sourceStream field to the CameraStream class, meant to contain a reference to the direct stream which produces actual image data for streams of type CameraStream::Mapped. The sourceStream of mapped streams will be used in later patches to make sure for each Mapped stream at least one libcamera::Stream is queued to the libcamera::Camera. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-08py: examples: Add simple-cam.pyTomi Valkeinen
Add a Python version of simple-cam from: https://git.libcamera.org/libcamera/simple-cam.git Let's keep this in the libcamera repository until the Python API has stabilized a bit more, and then we could move this to the simple-cam repo. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-08py: examples: Add simple-continuous-capture.pyTomi Valkeinen
Add a slightly more complex, and I think a more realistic, example, where the script reacts to events and re-queues the buffers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-08py: examples: Add simple-capture.pyTomi Valkeinen
Add an example to showcase the more-or-less minimal capture case. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-06libcamera: base: log: Color the log prefixLaurent Pinchart
Add coloring to the log prefix to increase log readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>