| Age | Commit message (Collapse) | Author |
|---|
|
The descriptors_ map holds Camera3RequestDescriptor(s) which are
per-capture requests placed by the framework to libcamera HAL.
CameraDevice::requestComplete() looks for the descriptor for which the
camera request has been completed and removes it from the map.
Since the requests are placed in form of FIFO and the framework expects
the order of completion to be FIFO as well, this calls for a need of
a queue rather than a std::map.
This patch still keeps the same lifetime of Camera3RequestDescriptor as
before i.e. in the requestComplete(). Previously, a descriptor was
extracted from the map and its lifetime was bound to requestComplete().
The lifetime is kept the same by manually calling .pop_front() on the
queue. In the subsequent commit, this is likely to change with a
centralized location of dropping descriptors from the queue for request
completion.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use Camera3RequestDescriptor as cookie for the Capture Request.
The cookie is used to lookup descriptors map in
CameraDevice::requestComplete(). The map will be transformed to a
queue in subsequent commit.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Acquire fences for streams of type Mapped generated by
post-processing are not correctly handled and are currently
ignored by the camera HAL.
Fix this by adding CameraStream::waitFence(), executed before
starting the post-processing in CameraStream::process().
The change applies to all streams generated by post-processing (Mapped
and Internal) but currently acquire fences of Internal streams are
handled by the camera worker. Postpone that to post-processing time by
passing -1 to the Worker for Internal streams.
Also correct the release_fence handling for failed captures, as the
framework requires the release fences to be set to the acquire fence
value if the acquire fence has not been waited on.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera and libcamera-base libraries are currently unversioned, but
donwstream users expect these to have a proper SONAME version in order to
package them.
A stable release has not yet happened because the project is still under
development and the API/ABI might change. But having a versioned SONAME
would allow distributions to package libcamera, without the need to add
any downstream patch to set the version.
Since the "0.0.0" version is already used in different places, let's also
use that as the library version. The meson build system will use the first
part of the version ("0") as the SONAME version, which is aligned with the
convention used by other projects:
$ ls /lib64/libcamera*so* -1
/lib64/libcamera-base.so
/lib64/libcamera-base.so.0
/lib64/libcamera-base.so.0.0.0
/lib64/libcamera.so
/lib64/libcamera.so.0
/lib64/libcamera.so.0.0.0
$ objdump -p /lib64/libcamera.so.0.0.0 | grep SONAME
SONAME libcamera.so.0
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Camera3RequestDescriptor containing the capture request is added to
the descriptors_ map after a call to CameraWorker::queueRequest(). This
is a race condition since CameraWorker::queueRequest() queues requests
to libcamera::Camera asynchronously. The requests may thus complete
before they get added to descriptors_, in which case requestComplete()
will fail to lookup the request in the map.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Fix all name in all instances of the function gst_libcamera_get_camera_mananger
to gst_libcamera_get_camera_manager. Spelling of manager was incorrect.
This patch has no functional changes.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The idMap variable may be used uninitialized in the
ControlSerializer::deserialize<ControlList>() function as reported by
gcc 11:
../../src/libcamera/control_serializer.cpp: In member function ‘T libcamera::ControlSerializer::deserialize(libcamera::ByteStreamBuffer&) [with T = libcamera::ControlList]’:
../../src/libcamera/control_serializer.cpp:609:33: error: ‘idMap’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
609 | ControlList ctrls(*idMap);
|
This is due to a missing default case in a switch/case. Fix it by adding
the default case.
Fixes: 6b1404fc4836 ("libcamera: control_serializer: Fix usage of uninitialized variable")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Generation of thumbnail is not occuring currently because
ANDROID_JPEG_THUMBNAIL_SIZE is not set for request metadata passed
to PostProcessorJpeg::process(). The commit 1264628d3c92("android:
jpeg: Configure thumbnailer based on request metadata") introduced
the mechanism to retrieve the thumbanil size from request metadata,
however it didn't add the counterpart i.e. inserting the size in
the request metadata in request metadata template, at the first place.
The patch fixes this issue by setting ANDROID_JPEG_THUMBNAIL_SIZE in
the request metadata template populated by
CameraCapabilities::requestTemplatePreview(). The value for
ANDROID_JPEG_THUMBNAIL_SIZE is set to be the first non-zero size
reported by static metadata ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES.
Fixes: 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
CameraMetadata's constructor take in number of entries and number of
bytes to be allocated for those entries. However, CameraMetadata is
already capable of resizing its container on the fly, in case more
entries are added to it. Hence, the numbers passed in during the
construction acts as hint values for initialization.
Clarify this in CameraCapabilities::requestTemplatePreview() and
remove the \todo, as the arguments and the \todo gives the perspective
that we need to be quite accurate with the numbers of entries / bytes,
which is not the case.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Two independent instances of the ControlSerializer class are in use at
the IPC boundaries, one in the Proxy class that serializes data from the
pipeline handler to the IPA, and one in the ProxyWorker which serializes
data in the opposite direction.
Each instance operates autonomously, without any centralized point of
control, and each one assigns a numerical handle to each ControlInfoMap
it serializes. This creates a risk of potential collision on the handle
values, as both instances will use the same numerical space and
are not aware of what handles has been already used by the instance "on
the other side".
To fix that, partition the handles numerical space by initializing the
control serializer with a seed according to the role of the component
that creates the serializer and increment the handle number by 2, to
avoid any collision risk.
While this is temporary and rather hacky solution, it solves an issue
with isolated IPA modules without too much complexity added.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlInfo class was originally designed to only transport
the control's minimum and maximum values which represent the control's
valid limits.
Later the default value of the control has been added to the ControlInfo
class, but the control serializer implementation has not been updated
accordingly.
This causes issues in IPA modules making use of ControlInfo::def() as,
when running in isolation, they would receive 0.
Fix that by serializing and deserializing the additional ControlValue
and update the protocol description accordingly.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When a ControlList is deserialized, the code searches for a valid
ControlInfoMap in the local cache and use its id map to initialize the
list. If no valid ControlInfoMap is found, as it's usually the case
for lists transporting libcamera controls and properties, the globally
defined controls::controls id map is used unconditionally.
This breaks the deserialization of libcamera properties, for which a
wrong idmap is used at construction time.
As the serialization header now transports an id_map_type field, store
the idmap type at serialization time, and re-use it at
deserialization time to identify the correct id map.
Also make the validation stricter by imposing to list of V4L2 controls to
have an associated ControlInfoMap available, as there is no globally
defined idmap for such controls.
To be able to retrieve the idmap associated with a ControlList, add an
accessor function to the ControlList class.
It might be worth in future using a ControlInfoMap to initialize the
deserialized ControlList to implement controls validation against their
limit. As such validation is not implemented at the moment, maintain the
current behaviour and initialize the control list with an idmap.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA::configure() function has an IPAConfigInfo parameters which
contains a map of numerical indexes to ControlInfoMap instances.
This is a leftover of the old IPA protocol, where it was not possible to
specify a rich interface as it is possible today and each entity
ControlInfoMap was indexed by a numerical id and stored in a map.
Now that the IPA interface allows to specify parameters by name, drop the
map and send the sensor's control info map only.
If we'll need more ControlInfoMap to be shared with the IPA, a new parameter
can be added to IPAConfigInfo.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The utils.h header #include is separate from the rest of the group for
no reason. Move it to where it should be.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Returning a non-managed pointer can cause leaks. Use a unique_ptr<>
instead to avoid possible future issues.
The std::move() for the planes argument to the FrameBuffer constructor
is dropped as it's misleading. FrameBuffer has no constructor that takes
an rvalue reference to planes, so the vector was copied despite the
move. This only clarifies the intent, no functional change is
introduced.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The FrameBuffer class has no constructor that takes an rvalue reference
to planes. The std::move() is thus misleading as a copy will still take
place. Drop it to clarify the code, no functional change is introduced.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The global pointer pointing to libcamera's CameraManager isn't used
outside of the gstlibcamera-utils.cpp compilation unit. Make it static.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Existing pipeline handlers already support planar YUV formats.
Extend the gstreamer format map to incorporate them.
While here, split the formats into distinct groups.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
The RGB and YUV conversion doesn't take the stride into account, neither
when creating the textures, nor when sampling them. Fix it by using the
stride as the texture width, and multiplying the x coordinate in the
vertex shaders by a factor to only sample the active portion of the
image.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add support for the YUV420, YVU420 and YUV422 formats supported by
libcamera. YUV420 can be produced by the Raspberry Pi pipeline handler,
being able to display it is useful for testing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
To prepare for fully-planar YUV support, rename the existing format
families YUV and NV to YUVPacked and YUVSemiPlanar respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Make the stride configurable to support conversion of images with
padding at the end of lines.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
qcam currently assumes that no padding is used at end of lines, and uses
the image width as the stride. This leads to rendering failures with
some formats on some platforms. To prepare for stride support, add a
stride parameter to the ViewFinder::setFormat() function to pass the
stride from the stream configuration to the viewfinder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
An Android HAL client may request multiple identical streams. It is
redundant that a native camera device produces a separate stream for
each of the identical requests. Configure the camera with a single
stream in that case. The other identical HAL streams will be produced by
the YUV post-processor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraStream creates PostProcessorYuv if the destination format
is NV12.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraStream creates PostProcessor and FrameBufferAllocator in
the constructor. CameraStream assumes that a used post processor
is JPEG post processor. Since we need to support various post
processors, we would rather move the creation to configure() so
as to return an error code if no proper post processor is found.
This also moves FrameBufferAllocator and Mutex creation for
consistency.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rectify variable renaming style for YPlaneSize, UVPlaneSize.
libcamera uses camelCase where first letter should be in lower case.
Fixes: e355ca0087cd9("android: jpeg: Split and pass the thumbnail planes to encoder")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
YUV post-processor doesn't need any instance reference from CameraDevice
class. Remove it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Add libatomic dependency which is needed since the addition of the base
support library in commit 27aff949fbc1 ("libcamera/base: Move extended
base functionality") to avoid the following build failure:
/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/libcamera/base/libcamera-base.so.p/message.cpp.o: in function `libcamera::Message::registerMessageType()':
message.cpp:(.text+0x290): undefined reference to `__atomic_fetch_add_4'
Fixes: 27aff949fbc1 ("libcamera/base: Move extended base functionality")
Fixes: http://autobuild.buildroot.org/results/6e3471df8e9312a1789ca05ae70cc2283bfeec23
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A kernel bug can lead to unexpected buffers being dequeued where we
haven't entered the buffer in our queuedBuffers_ list.
This causes invalid accesses if not handled correctly within libcamera,
and while it is a kernel issue, we can protect against unpatched
kernels to provide a more suitable error message.
This is fixed in the kernel by commit c592b46907ad ("media:
videobuf2-core: dequeue if start_streaming fails") [0]
[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c592b46907ad
Handle unexpected buffers by returning a nullptr, and move cache
management after the validation of the buffer.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The incoming params buffer may contain uninitialised data, or the
parameters of previously queued frames. Clearing the entire buffer
may be an expensive operation, and the kernel will only read from
structures which have their associated use-flag set.
It is the responsibility of the algorithms to set the use flags
accordingly for any data structure they update during prepare().
Clear the use flags of the parameter buffer before passing the buffer
to the algorithms during their prepare() operations.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set the compressed flag in ENUM_FMT if the format is MJPEG. As the only
compressed format that libcamera currently supports is MJPEG, this
should be sufficient.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Now that libcamera has the V4L2 format names, retrieve and report those
names in ENUM_FMT. While at it, refactor the code slightly with
PixelFormatInfo.
This fixes the test failures on v4l2-compliance with the v4l2
compatilibity layer that were observed in version v4l2-compliance
version 1.21.0-4838.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Add a helper function to V4L2PixelFormat for retrieving the V4L2
description string.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The entries for NV24 and NV42 were missing from the V4L2PixelFormat map.
Add them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Add V4L2 description strings to the map of V4L2 formats. To achieve
this, create an Info struct to wrap them. Update the one current user of
the old map.
This will be used later in the V4L2 compatibility layer to report the
V4L2 format description.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Some applications (like Firefox) run open() many times on video device
nodes. This may lead to user confusion when they see "INFO V4L2Compat
v4l2_compat_manager.cpp:146 No camera found for /dev/videoX" over and
over again.
Lower the log level to debug so that we can still get this information
on debug, and so users won't see it all the time.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
After multi-planar support was introduced for jpeg encoding as well,
EncoderLibJpeg::encode() expects a vector of planes as the source of
framebuffer to be encoded. Currently, we are passing a contiguous buffer
which is treated as only one plane (instead of two, as thumbnail is NV12).
Hence, split the thumbnail data into respective planes according to NV12.
This fixes a crash in encoding of thumbnails.
Fixes: 894ca69f6043("android: jpeg: Support multi-planar buffers")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ControlValidator passed to a ControlList constructor
is used, but not modified.
Make it const.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Failure can still happen by CameraBufferManager during Unlock() and/or
Deregister() of camera3Buffer handles. We should be logging those
errors as well.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2 compatibility layer supports the single-planar API only, and
thus exposes a single V4L2 buffer plane to applications, regardless of
the number of planes in the FrameBuffer. For multi-planar frame buffers,
the bytesused value isn't correct as it only takes the first plane into
account. Fix it by summing the bytesused values for all FrameBuffer
planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Now that the ViewFinderQt receives an Image, move the Converter API to
take an Image as well, and enable multi-planar buffer support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the ViewFinderGL receives an Image, it can trivially support
multi-planar buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the manual implementation of frame buffer mapping with the Image
class to improve code sharing. The ViewFinder API is updated to take an
Image pointer in the render() function to prepare for multi-planar
buffer support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix the debug message that prints frame metadata to print the number of
bytes used for each plane, not just the first one.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When creating a DRM frame buffer, the dmabufs for the planes are
imported as GEM objects. For multi-planar formats, all planes may use
the same dmabuf, which results in multiple imports. This doesn't cause
any issue at import time, as DRM detects this situation and returns the
same GEM object. However, when destroying the frame buffer, the same GEM
object ends up being closed multiple times, which generates an error.
Fix this by avoiding multiple imports of the same dmabuf for the same
frame buffer. While the issue may theoretically occur with identical
dmabufs for different frame buffers, this is quite unlikely and is thus
not addressed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that libcamera supports per-plane offsets, pass the values to
drmModeAddFB2(). The KMS sink in cam is now capable of rendering
multi-planar formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The stride is not always identical for all planes for multi-planar
formats. Semi-planar YUV formats without horizontal subsampling often
have a chroma stride equal to twice the luma stride, and tri-planar YUV
formats with a 1/2 horizontal subsampling often have a chroma stride
equal to half the luma stride. This isn't correctly taken into account
when creating a DRM frame buffer, as the same stride is set for all
planes.
libcamera doesn't report per-plane stride values yet, but uses chroma
strides that match the above description for all currently supported
platforms. Calculation the chrome strides appropriately in the KMSSink
class, and pass them to DRM::createFrameBuffer().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the manual implementation of frame buffer mapping with the Image
class to improve code sharing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The new Image class represents a multi-planar image with direct access
to pixel data. It currently duplicates the function of the
MappedFrameBuffer class which is internal to libcamera, and will serve
as a design playground to improve the API until it is considered ready
to be made part of the libcamera public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
