summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-10-24ipa: rpi: agc: Fetch AWB status in the prepare methodDavid Plowman
AWB writes this out during prepare, so we may as well read it in AGC prepare as well. Reading it in process is wrong on the PiSP platform because process runs before prepare, so the AWB status won't be there (on vc4 it made no difference). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: vc4: Move denoise control handling into the VC4 derived IPANaushir Patuck
Since noise control handling differs between the VC4 and PiSP IPAs, move the current denoise control handler from ipa base into the vc4 IPA derived class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: agc: Allow AGC channels to avoid using "fast desaturation"David Plowman
"Fast desaturation" is a technique that can help the AGC algorithm to desaturate images more quickly when they are very over-exposed. However, it uses digital gain to do this which can confuse our HDR techniques. Therefore make it optional. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: alsc: Do not re-read the alsc.status metadataDavid Plowman
This was being re-read in order to determine what LSC gains had been applied. We can just retrieve these numbers from the prevAsyncResults_ instead. This will also enable other future algorithms to manipulate the LSC tables in the alsc.status, without it breaking the core ALSC algorithm here. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: hdr: Add the ability to alter the LSC tableDavid Plowman
We can perform some of the local contrast adjustment using global gains in the LSC table. We can vary the amount of gain according to the measured brightness of that image region. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-23libcamera: transform: Make the transformFromOrientation() function staticLaurent Pinchart
Now that the transformFromOrientation() function isn't used outside of transform.cpp, make it static to remove it from the public API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-10-23libcamera: transform: Fold transformToOrientation() in its only callerLaurent Pinchart
The transformToOrientation() function is called from Orientation operator*(const Orientation &o, const Transform &t); only. Fold the code in the caller and drop the transformToOrientation() function to drop what can be considered as an ill-defined operation from the API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-10-23libcamera: camera_sensor: Cache mounting orientation instead of transformLaurent Pinchart
The cached rotationTransform_ value is used in computeTransform() only, to compute the mounting orientation. Cache the mounting orientation instead, removing the need for the intermediate conversion of the rotation to a transform. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-10-23py: cam: Add option to set stream orientationJacopo Mondi
Add a '--orientation|-o' option to the Python version of the cam test application to set an orientation to the image stream. Supported values are: - rot0: no rotation - rot180: rotate 180 degrees - flip: vertical flip - mirror: horizontal flip Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23apps: cam: Add option to set stream orientationJacopo Mondi
Add a '--orientation|-o' option to the cam test application to set an orientation to the image stream. Supported values are the ones obtained by applying flips to the camera sensor: - rot0: no rotation - rot180: rotate 180 degrees - flip: vertical flip - mirror: horizontal flip Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: Use CameraConfiguration::orientationJacopo Mondi
Replace the usage of CameraConfiguration::transform with the newly introduced CameraConfiguration::orientation. Rework and rename the CameraSensor::validateTransform(transform) to CameraSensor::computeTransform(orientation), that given the desired image orientation computes the Transform that pipeline handlers should apply to the sensor to obtain it. Port all pipeline handlers to use the newly introduced function. This commit breaks existing applications as it removes the public CameraConfiguration::transform in favour of CameraConfiguration::orientation. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23py: libcamera: Define and use OrientationJacopo Mondi
Define an enumeration type for Orientation and expose the CameraConfiguration::orientation property in place of CameraConfiguration::transform. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: transform: Add operations with OrientationJacopo Mondi
Add two operations that allows to combine Transform with Orientation. - Transform operator/(const Orientation &o1, const Orientation &o2) allows to easily get back the Transform that needs to be applied to Orientation2 to get Orientation1 - Orientation operator*(const Orientation &o, const Transform &t) allows to apply a Transform to an Orientation and obtain the combination of the two These two operations allow applications to use Transforms to manipulate the Orientation inside the CameraConfiguration, if they wish. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: transform: Invert operator*() operandsJacopo Mondi
The current definition of operator*(Transform t1, Transform t0) follows the function composition notion, where t0 is applied first then t1 is applied last. In order to introduce operator*(Orientation, Transform) where a Transform is applied on top of an Orientation, invert the operand order of operator*(Transform, Transform) so that usage of operator* with both Orientation and Transform can be made associative. For example: Orientation o; Transform t = t1 * t2 Orientation o1 = o * t = o * (t1 * t2) = (o * t1) * t2 = o * t1 * t2 Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: transform: Add functions to convert OrientationJacopo Mondi
Add two helper functions to the transform.cpp file that allows to convert to and from an Orientation. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: properties: Make 'Rotation' the mounting rotationJacopo Mondi
Specify in the documentation that properties::Rotation specifies the mounting rotation of the camera module. This avoids confusion with the image orientation which is instead expressed by CameraConfiguration::orientation. For this reason, do not compensate the Rotation property when initializing the CameraSensor class but report the value of V4L2_CID_CAMERA_SENSOR_ROTATION or 0 if the control is not available. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23Documentation: Add figures to document OrientationJacopo Mondi
Add figures in Documentation/rotation/ to document the plane transformations defined by the Orientation enumeration. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: camera: Introduce OrientationJacopo Mondi
Introduce the Orientation enumeration which describes the possible 2D transformations that can be applied to an image using two basic plane transformations. Add to the CameraConfiguration class a new member 'orientation' which is used to specify the image orientation in the memory buffers delivered to applications. The enumeration values follow the ones defined by the EXIF specification at revision 2.32, Tag 274 'orientation'. The newly introduced field is meant to replace CameraConfiguration::transform which is not removed yet not to break compilation. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23libcamera: camera_sensor: Cache rotationTransform_Jacopo Mondi
The rotationTransform_ depends on a V4L2 control whose value does not change for the whole lifetime of the camera. Instead of re-calculating it everytime the camera is configured, cache it at properties initialization time. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-23apps: qcam: Add support for RGB565Daniel Scally
Qt supports RGB565 natively; add support for the format by mapping the libcamera format to Qt's representation of it. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-18pipeline: rpi: vc4: Allocate more embedded data buffersWilliam Vinnicombe
If the pipeline runs out of embedded data buffers, then it will pass the frame to the IPA without the metadata. The IPA then has to use the delayed controls as inputs to the algorithms. This can cause problems with the subsequent algorithms if the sensor did not action the controls, especially with the autofocus as that doesn't have controls which can be passed in lieu of the metadata. Reduce the likelihood of this by increasing the number of embedded data buffers, as they are small so a generous number can be allocated. Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: When AGC channels are changed, start with the 1st channelNaushir Patuck
Whenever the AGC active channels are changed, start with the first channel listed. This allows applications to rely on a particular channel being generated first. For example, multi-exposure HDR always wants the short channel first. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Avoid overwriting caller's statistics pointerDavid Plowman
The code was inadvertently overwriting the caller's StatisticsPtr, meaning that subsequent algorithms would get the wrong image statistics when AGC channels changed. This could be fix using std::ref, though I find the C-style pointer fix easier to understand! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: denoise: Support different denoise configurationsDavid Plowman
Some use cases may require stronger, or different, denosie settings to others. For example, the way frames are accumulated during single exposure HDR means that we may want stronger denoise. This commit adds such support for different configurations that can be defined in the tuning file. Older tuning files, or files where there is only a single configuration, load only the "normal" denoise configuration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: contrast: Allow adaptive contrast enhancement to be disabledDavid Plowman
The enableCe() function enables or disables adaptive contrast enhancement and the restoreCe() function sets it back to its normal state (which is what was read from the tuning file). In future, algorithms like HDR might want to take over tonemapping functions, so any dynamic behaviour here would upset them. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Add an AGC stable regionDavid Plowman
Add a small "stable region" parameter (defaulting to 2%) within which the AGC will not adjust the exposure it requests. It allows applications to configure the AGC to avoid continual micro-adjustments of exposure values if they are somehow sensitive to it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Make color space members in RPiCameraConfiguration publicNaushir Patuck
This allows them to be accessed by the pipeline handlers when needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Move flip handling validation codeNaushir Patuck
Move the handling of Bayer order changes due to flips to run before platformValidate(). This removes the need for this code to be split between platformValidate() and validate() as it is right now. Also add some validation to ensure the vc4 pipeline handler only supports CSI2 packing or no packing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Add SW downscale status to RPi::StreamNaushir Patuck
Record if additional software downscaling is needed for a particular stream in the RPi::Stream class. Additional software downscaling may be needed if the user required downscale factor is greater than what the ISP hardware is capable of. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add new algorithms for PiSPNaushir Patuck
Add new CAC, HDR, Saturation and Tonemapping algorithms. Add a new Denoise algorithm that handles spatial/temporal/colour denoise through one interface. With this change, the old SDN algorithm is now considered deprecated and a warning message will be displayed if it is enabled. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare AWB for PiSP supportNaushir Patuck
Prepare the AWB algorithm to support the PiSP hardware. The key change is to factor in the LS correction in the AWB zone statistics. This is different from VC4 where the LS correction happens before statistics gathering. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare ALSC for PiSP supportNaushir Patuck
Prepare the ALSC algorithm to support the PiSP hardware. The key change is to avoid factoring out the WB correction in the AWB zone statistics. Add the ALSC correction to the global metadata so that AWB can use it to factor the gains back in for the AWB calculations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add PiSP definitions to the Controller hardware descriptionNaushir Patuck
Add an entry to Controller::HardwareConfig describing the PiSP hardware for the IPA and controller algorithms to use. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add statsInline to the Controller hardware descriptionNaushir Patuck
Add a new boolean field (statsInline) to Controller::HardwareConfigMap. This field indicates where the statistics are generated in the hardware ISP pipeline. For statsInline == true, statistics are generated before the frame is processed (e.g. the PiSP case), and statsInline == false indicates statistics are generated after the frame is processed (e.g. the VC4 case). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add try_lock() to RPiController::MetadataNaushir Patuck
Add the missing try_lock() member function to RPiController::Metadata. This will allow RPiController::Metadata to be used as a template parameter in std::scoped_lock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18mojom: pipeline: ipa: rpi: Add fields for PiSP objectsNaushir Patuck
Add the PiSP Frontend and Backend SharedMemObject file descriptors to the ipa::init() call. This will allow the pipeline handler to pass these objects to the IPA after construction. Add a flag to indicate if buffer swaps are needed when starting the ISP for the stitch block. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add IpaBase::platformStart() member functionNaushir Patuck
Add a virtual IpaBase::platformStart() member function that is called at the end of IpaBase::start(). For the IpaVc4 derived class, this function does nothing, but will be used in the PiSP derived class to reset internal state on startup. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Add SharedMemObject classNaushir Patuck
Add new SharedMemObject class that wraps a memfd memory allocation and constructs a templated object in the memory. With appropriate locking, this object can then be shared across different processes using the associated allocation file handle. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Add Recurrent and Needs32bitConv flags to RPi::StreamNaushir Patuck
Add a new "Recurrent" stream flag. This flag indicates the stream buffer handling/management happend from the pipeline handler exclusively. This is used for TDN/Stitch and Config streams. Add a new Needs32bitConv stream flag to indicate that this stream needs a software postprocessing conversion run on it before returning out to the application. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18pipeline: rpi: Add RequiresMmap flag to RPi::StreamNaushir Patuck
Add a new RequiresMmap flag to the RPi::Stream class indicating that buffers handled by the stream must be mmapped after allocation and cached internally. Add a new member function getBuffer(id) which can be used to obtain the mapped buffers for a given buffer id. Add a new member function acquireBuffer() which can be used to obtain any mapped buffer that has not already been acquired by the caller. As a drive-by, add the <algorithm> header to rpi_stream.cpp as it is needed for the std::find_if() function. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-16py: gen-py-controls: Remove SceneFlicker workaroundKieran Bingham
The python bindings layer has to parse the libcamera controls to ensure that they are converted to suitable names for the python layer. Part of this strips out common prefixes from control names, however the SceneFlicker control would end up using an illegal name if processed in the same way as the other controls. The SceneFlicker control has now been removed as part of the introduction of the AeFlickerMode and AeFlickerPeriod controls. Remove the workaround in the python layer. Fixes: 6fdbf3f38c31 ("libcamera: controls: Add controls for AEC/AGC flicker avoidance") Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-16py: Add the SensorConfiguration classDavid Plowman
We provide access to the various fields of the new SensorConfiguration class. The class also needs a constructor so that Python applications can make one and put it into the CameraConfiguration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-06libcamera: converter: drop unnecessary #include directiveAndrey Konovalov
libcamera/internal/media_device.h includes linux/media.h already. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-06libcamera: converter: A few fixes to ConverterFactoryBase documentationAndrey Konovalov
The description of ConverterFactoryBase::registerType() referred to a converter factory as "converter class" and "converter". Fix that. Also make the descriptions of ConverterFactoryBase::compatibles() and ConverterFactoryBase::create() a bit more specific. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-05ipa: rpi: Avoid skipping IPAs on the first frame after the drop framesDavid Plowman
We avoid skipping the IPAs while frameCount_ is less than dropFrameCount_, indicating that these frames will not be sent to the application. This means that when these numbers are equal then this is the first frame the application will get, so again, we must avoid skipping the IPAs. Consequently the test here must avoid the case of equality. Fixes: 51533fecae8d ("ipa: rpi: Fix frame count logic when running algorithms") Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-09-27libcamera: rpi: Simplify validate() and configure() for YUV/RGB streamsNaushir Patuck
This commit simplifies the validate() and configure() calls in the pipeline handler in a number of ways: - Determine the V4L2DeviceFormat structure fields for all streams in validate(), cache them and reuse in configure() instead of re-generating this structure multiple times. - Remove setting a default pixel format in validate(), this code patch will not be used. - Use the recently added updateStreamConfig() and toV4L2DeviceFormat() helpers to populate fields in the V4L2DeviceFormat and StreamConfiguration structures to reduce code duplication. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-09-27libcamera: rpi: Change default stream formatsNaushir Patuck
Switch to XRGB8888 as a default Viewfinder role output format, this is a more correct description of the ISP hardware output, and what is accepted by the Raspberry Pi hardware. Switch to YUV420 as a default output format for everything else, as this format is best supported by encoding (e.g. H.264, JPEG) sinks on the Raspberry Pi platform. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-09-27libcamera: rpi: Simplify validate() and configure() for RAW streamsNaushir Patuck
This commit simplifies the validate() and configure() calls in the pipeline handler in a number of ways: - Only pass the RPiCameraConfiguration structure into platformValidate() and platformConfigure(). - Determine the V4L2DeviceFormat structure fields for all streams in validate(), cache them and reuse in configure() instead of re-generating this structure multiple times. - Use the recently added updateStreamConfig() and toV4L2DeviceFormat() helpers to populate fields in the V4L2DeviceFormat and StreamConfiguration structures to reduce code duplication. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-09-27libcamera: rpi: Add some helpers to PipelineHandlerBaseNaushir Patuck
Add a helper updateStreamConfig() that updates the format related fields in a StreamConfiguration from a given V4L2DeviceFormat structure. Add and override to the toV4L2DeviceFormat() helper that returns a V4L2DeviceFormat structure populated from the format related fields in a StreamConfiguration. Both these helper functions will be used in a future commit to simplify the Raspberry Pi pipeline handler configuration/validation code. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-09-27libcamera: rpi: Cache rawStreams and outStreamsNaushir Patuck
Currently, the stream configuration is stored in two vectors, rawStreams and outStreams for convenience. However, these vectors are constructed in both platformValidate() and platformConfigure(). This change caches these vectors in the RPiCameraConfiguration class to construct them only once in platformValidate(). Pass a pointer to the current configuration to platformValidate() and platformConfigure() so that they can access the streams vectors. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>