| Age | Commit message (Collapse) | Author |
|---|
|
The CameraSensorHelperFactory::createInstance() function overrides a
virtual function from CameraSensorHelperFactoryBase. The function
declaration doesn't mark it with the override keyword. This could cause
issues in the future if the base class' function changes, as the
compiler will not issue any warning in that case. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The classes Rectangle, Size and SizeRange are referenced with \struct in
the doxygen comments in geometry.cpp. Correct the reference to \class
to better reflect their definition.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All the Raspberry Pi official camera tuning files are updated for
HDR. As stated previously, there is no mechanism in the hardware for
combining images so all this does is enable multi-channel AGC to
produce short and long exposure frames. It will be up to the
application to deal with them.
The changes are identical in every tuning file.
1. The existing AGC tuning is duplicated twice so that we have 3 AGC
channels.
2. The first is left alone (the default AGC channel), the second is
tweaked to under-expose significantly (ev -3) and the final one is
tweaked to over-exposure slightly (ev +0.5)
3. Control parameters are provided to the "rpi.hdr" algorithm to
associate these AGC channels correctly with the HDR modes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sufficient plumbing is added so that the HDR mode control can be used
to engage HDR modes on platforms that support them. On the vc4
platform, this allows multi-channel AGC to run, though there is no
image merging.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The vector in question is destroyed when the item in the `buffers_` map
is destroyed as a result of the `erase()` call. A vector's destructor
already does all the things that `clear()` does,
so calling it earlier is not needed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When activating both ISP nodes on the i.MX8MP, but only connecting one
camera sensor, libcamera aborts because it couldn't find the chosen
entity's device node:
[37:54:40.779902250] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media1: rkisp1
[37:54:40.780196750] [3631] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:54:40.780237875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media0: rkisp1
[37:54:40.780505125] [3631] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:54:40.780599875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:312 Successful match for media device "rkisp1"
[37:54:40.780731375] [3631] ERROR V4L2 v4l2_device.cpp:93 'rkisp1_isp': Failed to open V4L2 device '': No such file or directory
Fix this by skipping empty device nodes:
[37:49:05.172672000] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media1 found
[37:49:05.172720625] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media1: rkisp1
[37:49:05.172973875] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:49:05.173012125] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media0: rkisp1
[37:49:05.173281625] [3603] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:49:05.173376875] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:107 Skip rkisp1_isp: no device node
[37:49:05.173414375] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:316 Successful match for media device "rkisp1"
[37:49:05.173671250] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video1[15:cap]: Opened device platform:rkisp1: rkisp1: rkisp1_stats
[37:49:05.173775125] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video2[16:out]: Opened device platform:rkisp1: rkisp1: rkisp1_params
[37:49:05.173880500] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video0[18:cap]: Opened device platform:rkisp1: rkisp1: rkisp1
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The capture_test.cpp file was added in the source list of meson in the
wrong place. Fix it so the list is alphabetically sorted.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the OV64A40 tuning files for the Arducam Omnivision camera
module to operate on the VC4 ISP architecture on Raspberry Pi 4 and
below.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a CameraSensorHelper for the OV64A40 camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the OV64A40 sensor with a camera helper to manage the gain
model, light sensitivity, and control delays.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel
size of 1.008µ.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement the StatsOutputEnable control for the VC4 IPA. When set,
this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput
metadata control.
To get this working, IpaBase::libcameraMetadata_ is moved from a private
to a protected member variable. This makes it accessable to the VC4
derived IPA class.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific
vendor controls.
Define a control StatsOutputEnable to allow the ISP hardware statistics
to be output through metadata via the Bcm2835StatsOutput control. The
implementation of these controls will follow in a subsequent patch.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to get reasonable default colour gains before AWB
has run. This is particularly important on the PiSP platform where
these numbers are helpful in programming the Front End statistics
block in advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to discover the correct black level values even
before any frames have been processed. This is important on the PiSP
platform where the front end black level blocks must be programmed in
advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't assert when taking the weighted mean of a zero-width or
zero-weight interval; return its upper bound. That is certainly
correct in the zero-width case, and plausible otherwise.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The gst_clear_event() function used by libcamerasrc has been introduced
in GStreamer 1.16, while libcamera claims to need 1.14 or newer. This
causes a compilation error. Fix it by copying the gst_clear_event()
implementation to gstlibcamera-utils.h when compiling with older
GStreamer version.
The version check makes it clear that the workaround is needed with
older versions only, flagging it for removal when the minimum GStreamer
version requirement will be bumped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
lc-compliance depends on support for skipping tests in gtest (commit
00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum
version for the gtest dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Advertise hardware constraints on the pixel processing rate through the
Controller::HardwareConfig structure. When calculating the minimum line
length during a configure() operation, ensure that we don't exceed this
constraint.
If we do exceed the hardware constraints, increase the modes's minimum
line length so the pixel processing rate falls below the hardware limit.
If this is not possible, throw a loud error message in the logs.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When converting from StreamConfiguration to V4L2DeviceFormat, the stride
was being dropped with the result that users could not request a custom
stride.
Set the stride in the V4L2DeviceFormat to prevent this happening.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When compiling with gcc 8.4.0, the compiler was reported to throw an
unused variable warning:
../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’:
../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable]
for (auto [i, cfg] : utils::enumerate(config_)) {
^
The build environment may have been incorrect as the problem couldn't be
reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is
indeed unused. It turns out that the code can be simplified, as the
commit that removed usage of the variable kept the now unneeded
utils::enumerate() call.
Simplify the code and fix the warning in one go.
Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting with meson 0.59, the custom_target() function substitutes
'@BASENAME@' in the output parameter with the input file name, with the
extension removed. This is exactly what we implement manually when
generating the IPA interface .cpp files.
Furthermore, starting with meson 0.60, the 'name' positional parameter
to the custom_target() function is optional, and defaults to the
basename of the output file (including the extension). This is exactly
the name we compute manually and pass to the function.
As libcamera requires meson 0.60 or newer, we can depend on those two
features and drop manual computation of the base name. This fixes a
warning with recent meson versions that complain that passing a file
object to the format() function is a broken feature:
WARNING: Broken features used:
* 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'}
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This commit implements renegotiation of the camera configuration and
source pad caps. A renegotiation can happen when a downstream element
decides to change caps or the pipeline is dynamically changed.
To handle a renegotiation the GST_FLOW_NOT_NEGOTIATED return value has
to be handled in GstLibcameraSrcState::processRequest(). Otherwise the
default would be to print an error and stop streaming.
To archive this in a clean way the if statement is altered into a switch
statement which now also has a case for GST_FLOW_NOT_NEGOTIATED. In the
case of GST_FLOW_NOT_NEGOTIATED every source pad is checked for the
reconfiguration flag with gst_pad_needs_reconfigure() which does not
clear this flag. If at least one pad requested a reconfiguration the
function returns without an error and the renegotiation will happen
later in the running task. If no pad requested a reconfiguration then
the function will return with an error.
In gst_libcamera_src_task_run() the source pads are checked for the
reconfigure flag by calling gst_pad_check_reconfigure() and if one pad
returns true and the caps are not sufficient anymore then the
negotiation is triggered. It is fine to trigger the negotiation after
only a single pad returns true for gst_pad_check_reconfigure() because
the reconfigure flags are cleared in the gst_libcamera_src_negotiate()
function.
If any pad requested a reconfiguration the following will happen:
1. The camera is stopped because changing the configuration may not
happen while running.
2. The completedRequests queue will be cleared by calling
GstLibcameraSrcState::clearRequests() because the completed buffers
have the wrong configuration.
3. The new caps are negotiated by calling gst_libcamera_src_negotiate().
When the negotiation fails streaming will stop.
4. The camera is started again.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a clearRequests() function to GstLibcameraSrcState which clears the
GstLibcameraSrcState::completedRequests_ queue.
Use this new function in gst_libcamera_src_task_leave() instead of doing
it manually.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the code which negotiates all the source pad caps into a separate
function called gst_libcamera_src_negotiate(). When the negotiation
fails this function will return false and true otherwise.
Use this function instead of doing the negotiation manually in
gst_libcamera_src_task_enter() and remove the now redundant error
handling code accordingly.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We make a few small improvements to the code:
* The arrayToSet method is prevented from overwriting the end of the
array if there are too many values in the input table. If you supply
a table, it will force you to put the correct number of elements in
it.
* The arrayToSet and setStrength member functions are turned into
static functions. (There may be a different public setStrength
member function in future.)
* When no tables at all are given, the configuration is flagged as
being disabled, so that we can avoid copying tables full of zeroes
around. As a consequence, the pipeline handler too will disable this
hardware block rather than run it needlessly. (Note that the tuning
tool will put in a completely empty "rpi.cac" block if no CAC tuning
images are supplied, benefiting from this behaviour.)
* The initialise member function is removed as it does nothing.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change where time-filtering is done before sorting out the
digital gain means that the target exposure without digital gain is no
longer set, breaking the 'AeLocked' calculation.
We can use the regular (full) target exposure instead.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain")
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Label draft controls and properties through the "draft" vendor tag
and deprecate the existing "draft: true" mechanism. This uses the new
vendor tags mechanism to place draft controls in the same
libcamera::controls::draft namespace and provide a defined control id
range for these controls. This requires moving all draft controls from
control_ids.yaml to control_ids_draft.yaml.
One breaking change in this commit is that draft control ids also move
to the libcamera::controls::draft namespace from the existing
libcamera::controls namespace. This is desirable to avoid API breakages
when adding new libcamera controls. So, for example, the use of
controls::NOISE_REDUCTION_MODE will need to be replaced with
controls::draft::NOISE_REDUCTION_MODE.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ranges.yaml file that is used to reserve control id
ranges/offsets for libcamera and vendor specific controls. This file is
used by the gen-controls.py script to generate control id values for
each control.
Draft controls now have a separate range from core libcamera controls,
breaking the existing numbering behaviour.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add support for using separate YAML files for controls and properties
generation. The mapping of vendor/pipeline handler to control file is
done through the controls_map variable in include/libcamera/meson.build.
This simplifies management of vendor control definitions and avoids
possible merge conflicts when changing the control_ids.yaml file for
core and draft controls. With this change, libcamera and draft controls
and properties files are designated the 'libcamera' vendor tag.
In this change, we also rename control_ids.yaml -> control_ids_core.yaml
and property_ids.yaml -> property_ids_core.yaml to designate these as
core libcamera controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The template file to the gen-controls.py and gen-py-controls.py is now
passed in through the '-t' or '--template' command line argument instead
of being a positional argument. This will allow multiple input files to
be provided to the scripts in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for vendor-specific controls and properties to libcamera.
The controls/properties are defined by a "vendor" tag in the YAML
control description file, for example:
vendor: rpi
controls:
- MyExampleControl:
type: string
description: |
Test for libcamera vendor-specific controls.
This will now generate a control id in the libcamera::controls::rpi
namespace, ensuring no id conflict between different vendors, core or
draft libcamera controls. Similarly, a ControlIdMap control is generated
in the libcamera::controls::rpi namespace.
A #define LIBCAMERA_HAS_RPI_VENDOR_CONTROLS is also generated to allow
applications to conditionally compile code if the specific vendor
controls are present. For the python bindings, the control is available
with libcamera.controls.rpi.MyExampleControl. The above controls
example applies similarly to properties.
Existing libcamera controls defined in control_ids.yaml are given the
"libcamera" vendor tag.
A new --mode flag is added to gen-controls.py to specify the mode of
operation, either 'controls' or 'properties' to allow the code generator
to correctly set the #define string.
As a drive-by, sort and redefine the output command line argument in
gen-controls.py and gen-py-controls.py to ('--output', '-o') for
consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix -Wdeprecated-this-capture error when building with c++20 by
explicity naming this in the capture.
Signed-off-by: Brett Brotherton <bbrotherton@google.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit fd84180d7a09 ("gstreamer: Implement element EOS handling") has
introduced a compilation warning with clang:
../../src/gstreamer/gstlibcamerasrc.cpp:768:23: error: unused variable 'oldEvent' [-Werror,-Wunused-variable]
g_autoptr(GstEvent) oldEvent = self->pending_eos.exchange(event);
^
This seems to be a false positive, but nonetheless breaks the build. Fix
it.
Fixes: fd84180d7a09 ("gstreamer: Implement element EOS handling")
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The algorithm computes R/G and B/G colour ratio statistics which we
should not allow to go to zero because there is clearly no gain you
could apply to R or B to equalise them. Instead flag such regions as
having "insufficient data" in the normal manner.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit implements EOS handling for events sent to the libcamerasrc
element by the send_event method (which can happen when pressing
Ctrl-C while running gst-launch-1.0 -e, see below). EOS events from
downstream elements returning GST_FLOW_EOS are not considered here.
To archive this add a function for the send_event method which handles
the GST_EVENT_EOS event. This function will set an atomic to the
received event and push this EOS event to all source pads in the running
task.
Also set the GST_ELEMENT_FLAG_SOURCE flag to identify libcamerasrc as a
source element which enables it to receive EOS events sent to the
(pipeline) bin containing it. This in turn enables libcamerasrc
to receive EOS events, for example, from gst-launch-1.0 with
the -e (--eos-on-shutdown) flag applied.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=91
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add a bunch of logging messages that have come in handy debugging
various issues with the pipeline handler code.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Correct a crash in CameraSensor::init() when trying to set the
V4L2_CID_HBLANK control on sensor not implementing this control. The
HBLANK sensor not being mandatory for non-RAW sensors, it can happen
that the sensor does not expose this control. Perform check against
availability of the control prior to usage in order to avoid the crash.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If no ISP output streams are configured, the ISP output count is skipped
for the the low res stream, and causes the drop frame logic to fail
because of a count mismatch. This in-turn stops any requests from
completing correctly.
Fix this by ensuring the low res output is counted correctly when no ISP
output streams are configured.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The entityControls variable is unused, remove it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We add an HdrMode control (to enable and disable HDR processing)
and an HdrChannel, which indicates what kind of HDR frame (short, long
or medium) has just arrived.
Currently the HdrMode supports the following values:
* Off - no HDR processing at all.
* MultiExposureUnmerged - frames at multiple different exposures are
produced, but not merged together. They are returned "as is".
* MultiExposure - frames at multiple different exposures are merged
to create HDR images.
* SingleExposure - multiple frames all at the same exposure are
merged to create HDR images.
* Night - multiple frames will be combined to create "night mode"
images.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to be able to do things like enable/disable AGC for all the
channels, so most of the AGC controls are updated to be applied to all
channels. There are a couple of exceptions, such as setting explicit
shutter/gain values, which apply only to channel 0.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
AWB writes this out during prepare, so we may as well read it in AGC
prepare as well. Reading it in process is wrong on the PiSP platform
because process runs before prepare, so the AWB status won't be there
(on vc4 it made no difference).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Since noise control handling differs between the VC4 and PiSP IPAs,
move the current denoise control handler from ipa base into the vc4 IPA
derived class.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
"Fast desaturation" is a technique that can help the AGC algorithm to
desaturate images more quickly when they are very
over-exposed. However, it uses digital gain to do this which can
confuse our HDR techniques. Therefore make it optional.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This was being re-read in order to determine what LSC gains had been
applied. We can just retrieve these numbers from the prevAsyncResults_
instead.
This will also enable other future algorithms to manipulate the LSC
tables in the alsc.status, without it breaking the core ALSC algorithm
here.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can perform some of the local contrast adjustment using global
gains in the LSC table. We can vary the amount of gain according to
the measured brightness of that image region.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the transformFromOrientation() function isn't used outside of
transform.cpp, make it static to remove it from the public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The transformToOrientation() function is called from
Orientation operator*(const Orientation &o, const Transform &t);
only. Fold the code in the caller and drop the transformToOrientation()
function to drop what can be considered as an ill-defined operation from
the API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
