| Age | Commit message (Collapse) | Author |
|---|
|
The Extensible::_d() functions are meant to be called by users of the
class. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add type safety by turning the MapFlag and OpenModeFlag enum into enum
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced Flags<> class to store a bitfield of
File::OpenMode in a type-safe way. The existing File::OpenMode enum is
renamed to File::OpenModeFlag to free the File::OpenMode for the Flags<>
type alias.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced Flags<> class to store a bitfield of
File::MapFlag in a type-safe way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a Flags template class that provide type-safe bitwise operators on
enum values. This allows using enum types for bit fields, without giving
away type-safety as usually done when storing combined flags in integer
variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a MaxLatency control, and plumb it into the HAL accordingly.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=50
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add skeletal still and manual request templates so that we can expand
them for FULL support.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to be able to add additional characteristics/request/result keys
into the corresponding list in the static metadata based on libcamera
camera capabilities. We also need to be able to easily check if the
lists have specific keys, for populating templates and result metadata.
Turn the characteristics, requests, and results keys vectors into sets,
and move them to member variables to achieve this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add helpers for setting android metadata from libcamera controls.
There are two versions, for scalars and collections, both of which take
a default value to fill in the android control if the libcamera control
is not found. They both return the value that was set.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the infrastructure for checking and reporting capabilities. Use
these capabilities to determine the hardware level as well.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=55
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The data for the exif ISO tag needs to come from SENSOR_SENSITIVITY. Set
it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Since we set entries with android tags directly, which are enums and not
arithmetic types, the addEntry template fails to match. Fix this by also
allowing enum values in addEntry.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add convenience functions for checking if an entry is present in a
CameraMetadata instance, and to check if an array entry includes a
specific value.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It would be convenient to be able to iterate over available boolean
values, for example for controls that designate if some function can be
enabled/disabled. The current min/max/def constructor is insufficient,
as .values() is empty, so the values cannot be easily iterated over, and
creating a Span of booleans does not work for the values constructor.
Add new constructors to ControlInfo that takes a set of booleans (if
both booleans are valid values) plus a default, and another that takes
only one boolean (if only one boolean is a valid value).
Update the ControlInfo test accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This commit adds a tuning file for the 12MP imx378 sensor. The sensor
actually shares the same driver (and CamHelper) as the imx477 so only
a new tuning file is required. The default choice of imx477.json can
be overridden by pointing LIBCAMERA_RPI_TUNING_FILE at a version of
the new imx378.json file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Return controls::FrameDuration through the per-frame Request metadata.
The frame duration is obtained by either the value in DelayedControls,
or (preferably) the value parsed from the embedded data buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When RPiCameraData::clearIncompleteRequests() clears out the request
queue during a stop condition, it unconditionally calls completeBuffer()
on all buffers in each request. This is wrong, as a buffer could have
already been completed as part of the current request, but the request
itself may not yet have completed.
Fix this by checking if the buffers in the request have been completed
before cancelling them.
Fixes: d372aaa10ddb ("pipeline: raspberrypi: Simplify RPiCameraData::clearIncompleteRequests()")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch adds group_id in GstLibcameraSrcState, since group_id is
something which should be same for all the pads, it can be reused
later.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The validation of RAW stream support is performed in two different
places:
- At initializeStreamConfigurations() time, by verifying that the
libcamera format associated with HAL_PIXEL_FORMAT_BLOB is a Raw format
and ensuring the Camera successfully validates it
- As initializeStaticMetadata() time by generating a CameraConfiguration
for the Raw stream role and ensuring it is a Raw format with a 16 bit
depth
The first check is used to build the list of supported Raw stream
resolutions. The latter is used to register the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability.
As building the list of supported Raw streams doesn't serve any
purpose if the RAW capability is not registered, centralize the Raw
format support verification at initializeStreamConfigurations() time by
ensuring the supported format is a Raw one with a 16 bit depth.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The getYUVResolutions() and getRawResolutions() functions are called
from the initializeStreamConfigurations() function, which is called by
initialize().
Rationalize the function naming scheme by renaming the two functions to
initializeYUVResolutions() and initializeRawResolution().
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When building the list of supported YUV streams in getYUVResolutions()
the CameraConfiguration provided by the caller as first parameters is used.
As the CameraConfiguration will be later actually applied to the Camera,
avoid any possible overlap of the configuration parameters by using a
throw-away CameraConfiguration generated for the Viewfinder stream role
in getYUVResolutions().
It's also nicer to avoid having two functions with a similar purpose
such as getYUVResolutions() and getRawResolutions() with different
parameter lists, as the presence of a CameraConfiguration as first
parameter might be confusing to the reader.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The std::cerr adjustment is set to std::left to print the usage text.
Restore it to its original value when done, to avoid affecting the
caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Keep entries sorted by sensor name to ensure the file stays readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add camera sensor properties for the OV8865 sensor. This is the world
facing camera on most MS Surface platforms.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a CameraSensorHelperOv8865 class. The gain coefficients are gleaned
from the datasheet; the lowest 7 bits are reported there as fractional
bits, so real gain is val/128.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the CameraSensorHelper factory with support for the IMX258
sensor found in the Nautilus Chromebook.
The values are read by manually tweaking the IMX258 kernel driver.
The IMX258 kernel driver hints that the sensor may be compatible
with the MIPI CCS specification, as the register set matches.
The values for analog gain constants are obtained by reading the
register indexes, corresponding to the analog gain constants, as
mentioned in MIPI CCS v1.1 specification.
The values have further been confirmed by Dave Stevenson as being
those specified in the datasheet.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CamApp loopUsers_ member variable isn't initialized, which results
in random execution of the event loop. Fix it.
Fixes: caa6ffacb2fc ("cam: Reorganize run() function and merge the two event loops")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
To allow testing capture from multiple cameras concurrently, turn the
--camera option into an array option, and create one CameraSession per
specified camera. The code is adapted to iterate over the sessions
vector instead of handling a single session. Thanks to all the
refactoring previously performed, changes are minimal.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for multi-camera support, extend the file naming scheme for
captured frames to include the camera index in addition to the stream
name and frame number.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the new hierarchical options feature of the option parser to turn
camera-related option (--capture, --file, --stream, --strict-formats and
--metadata) into children of the --camera option. As an added bonus, we
don't need to check anymore if a camera has been specified when capture
is requested, as that's now enforced by the option parser.
This change prepares for support of multiple cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The value of the --file option is the full name of the file to which
captured frames are written. To write files to a specific directory with
the default naming scheme, the "frame-#.bin" name has to appear at the
end of the file name. Simplify usage of the option by allowing --file to
specify a directory only. If the file name ends with a '/', the default
"frame-#.bin" file name is automatically appended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reorganize the run() function to make it more readable, and merge the
two event loops into one as capture and hotplug monitoring don't have to
be mutually exclusive.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The session_ member of the CamApp class is only needed in the run()
function. Make it a local variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The three CamApp functions listControls(), listProperties() and
infoConfiguration() operate on a camera. They would thus be better
placed in the CameraSession class. Move them there. As they now have no
error to return anymore, make them void functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move creation of the camera session and setup of the hotplug monitoring
from the init() function to the run() function, to group all the code
that performs operations based on command line options in a single
place. The cleanup() call on session creation failure isn't required
anymore, as the cleanup() function is called unconditionally upon return
from run().
This change allows merging two different code blocks related to hotplug
monitoring.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CamApp::cameraName() doesn't need to access any member of the CamApp
class. Make it static. While at it, drop an unneeded const from the
return value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The EventLoop::exec() function returns the exit code of the event loop,
not an error status. Drop the corresponding error check and error
message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Store the CameraManager instance in a unique_ptr to simplify memory
management and avoid leaks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Continue moving towards making the CameraSession class the central point
to handle a camera by moving the camera acquire operation. A new
CameraSession::camera() function is needed to allow access to the camera
from CamApp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Creating a configuration for a camera is an operation that logically
belongs to the CameraSession class. Move it there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the local CameraSession variable from the CamApp::run() function to
a member variable of the CamApp class, created in CamApp::init(). This
is a first step towards moving code to the CameraSession class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Store the BufferWriter and FrameBufferAllocator pointers in
std::unique_ptr<> instances to simplify memory management and avoid
leaks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for multiple concurrent camera sessions, move the event loop
exec() call from the CameraSession class to the CamApp class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make exiting the event loop the responsibility of the application, not
the camera session, to prepare for support of multiple camera sessions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't pass the event loop to the CameraSession constructor, as passing
this global object explicitly isn't a design that can scale.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename the Capture class to CameraSession, to prepare for multi-camera
support that will gather more camera-related operations than capture in
that class.
While at it, remove an unneeded blank line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The options parser currently ignores non-option arguments silently,
which is confusing. It's a common error to run 'cam -c1 -C 10' and
expect only 10 frames to be captured. As the -C option takes an optional
argument, the number 10 is interpreted as a non-option argument instead
of the argument to the -C option.
Fail parsing with an appropriate message and print usage information
when a non-option argument is found. The parser may be extended later to
accept non-option arguments when the application has a use for them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The OptionValue toKeyValues() and toArray() functions return a copy of
the values. This is unnecessary, and can cause use-after-free issues
when taking references to the return values. Return references instead
to optimize the implementation and avoid issues.
The behaviour of the two functions is now undefined in case of an option
type mismatch. The current implementation catches this with an
assertion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The roles() and updateConfiguration() functions check if the OptStream
OptionValue they receive is empty by first casting it to an array. To
prepare for the toArray() function not allowing such a cast when the
option value is empty, test if the option value is empty instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a convenience helper to check if an option value is empty, based on
the value type. This is useful as a shortcut syntax to check if an
option has been set.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
