summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-08-09ipa: rkisp1: Remove unused algorithms includes from rkisp1.cppDaniel Semkowicz
Algorithms are now created dynamically basing on tuning file, so there is no longer dependency on specific algorithms. Signed-off-by: Daniel Semkowicz <dse@thaumatec.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-09libcamera: Make IPA module signing recommended instead of mandatoryLaurent Pinchart
Commit b382f67c833d ("libcamera: Make IPA module signing mandatory for the meantime") made openssl and gnutls dependencies mandatory to work around the lack of proper IPA module isolation support, which broke operation without module signatures. This has now been fixed, so IPA module isolation isn't strictly required anymore. There are few use cases for disabling module signing completely, given that the openssl or gnutls dependencies are available on the vast majority of systems and the overheard introduced by isolating all IPA modules when signatures are not available is better avoided. Nonetheless, libcamera should operate properly with forced IPA module isolation, so we can support those use cases. Adopt a middle-ground approach to avoid unintentional isolation by documenting the dependencies as recommended, and warn at meson setup time if they are not found. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09libcamera: pub_key: Support openssl as an alternative to gnutlsLaurent Pinchart
Support verify IPA signatures with openssl as an alternative to gnutls, to offer more flexibility in the selection of dependencies. Use gnutls by default, for no specific reason as both are equally well supported. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09libcamera: pub_key: Gracefully handle failures to load public keyLaurent Pinchart
If the public key fails to load, PubKey::isValid() function returns false. The only user of the PubKey class, the IPAManager class, doesn't check that condition, and still calls the PubKey::verify() function, which leads to a crash. Fix this by returning false from PubKey::verify() if the key isn't valid, and log a warning in the IPAManager constructor to report the issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09libcamera: meson: Use dependency() to find gnutlsLaurent Pinchart
The gnutls library ships a pkgconfig .pc file. Use the standard dependency() method to locate it, instead of cc.find_library(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09libcamera: controls: Generate and use fixed-sized Span typesChristian Rauch
Define Span types explicitly as either variable- or fixed-sized. This introduces a new convention for defining Span dimensions in the property and control value definitions and generates Span types as variable-sized Span<T> or as fixed-sized Span<T,N>. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-09cam: kms_sink: Scale the frame buffer to full screen if supportedLaurent Pinchart
The KMS sink currently displays the frame buffer on the top-left corner of the screen, resulting in either a black area on the bottom and right sides (if the frame buffer is smaller than the display resolution) of in a restricted field of view (if the frame buffer is larger than the display resolution). Improve this by scaling the frame buffer to full screen if supported, and aligning the crop rectangle to the frame buffer center if the field of view needs to be restricted. The implementation test for possible composition options, from best to worst. The tests are performed when the camera is started, as testing atomic commits requires access to frame buffer objects, which are not available at configure time. Changing this would require either a large refactoring of the cam application to provide frame buffers earlier, or extending the KMS API to support testing commits with dummy buffer objects. Both are candidates for later development. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09cam: kms_sink: Make lifetime management of DRM request saferLaurent Pinchart
The drmRequest is KMSSink::processRequest() is created as a naked pointer, passed to the constructor of the KMSSink::Request object that stores it in a std::unique_ptr<>, and used later in the function. The current implementation is safe, but could be prone to both memory leaks and use-after-free bugs if modified. Improve it by replacing the naked pointer with a std::unique_ptr<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09cam: drm: Add support for test-only commitsLaurent Pinchart
Test-only commits are used to test a commit without applying any modification to the device. This will be used by the KMS sink to test feature support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-08cam: sdl_sink: Fix compilation with SDL2 <2.0.16Laurent Pinchart
The SDL_UpdateNVTexture() function, used for NV12 texture support, has been introduced in SDL2 2.0.16. Compiling against older SDL versions fails with ../src/cam/sdl_texture_yuv.cpp: In member function ‘virtual void SDLTextureNV12::update(const std::vector<libcamera::Span<const unsigned char> >&)’: ../src/cam/sdl_texture_yuv.cpp:19:2: error: ‘SDL_UpdateNVTexture’ was not declared in this scope; did you mean ‘SDL_UpdateYUVTexture’? 19 | SDL_UpdateNVTexture(ptr_, &rect_, data[0].data(), pitch_, | ^~~~~~~~~~~~~~~~~~~ | SDL_UpdateYUVTexture Fix it with conditional compilation based on the SDL version. Fixes: 7b8df9fe6b3e ("cam: sdl_sink: Add NV12 texture support") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com>
2022-08-08cam: sdl_sink: Add NV12 texture supportLaurent Pinchart
Extend the SDL sink with support for NV12 textures, useful on platforms that don't support packed YUYV formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-08cam: sdl_sink: Support multi-planar formatsLaurent Pinchart
In order to prepare for NV12 support, implement support for multi-planar formats in the SDL sink. This mainly consists in passing a vector of plane data to the SDLTexture::update() function instead of a single value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-08cam: Rename sdl_texture_yuyv.{cpp,h} to sdl_texture_yuv.{cpp,h}Laurent Pinchart
In preparation for the addition of NV12 support in the SDL sink, rename the sdl_texture_yuyv.{cpp,h} files to just "yuv". Separate sdl_texture_nv12.{cpp,h} files could be added instead, but given how short the implementation will be, grouping all YUV formats in a single file is better. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-08cam: sdl_texture_yuyv: Make line stride configurableLaurent Pinchart
The line stride of the texture is currently hardcoded based on the image width, which may not match the real stride. Use the stride value from the stream configuration instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-04libcamera: Correct typos and omissions for packed 10-bit raw monochrome formatDavid Plowman
One typo is corrected, and this format is added to one further table where it was missing entirely. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-04libcamera: Switch internal YAML files to YAML 1.1Laurent Pinchart
The python3-yaml package (containing the PyYAML Python package) shipped by Debian stable is documented as a YAML 1.1 parser: Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. PyYAML doesn't implement YAML 1.2 support, but ignores the minor number of the YAML directive, and thus doesn't choke on the libcamera internal files used to generate format- and control-related source code that explicitly state conformance with YAML 1.2. Still, given that we don't use any feature of YAML 1.2, and that the tuning data files now use YAML 1.1, switch the internal YAML files to version 1.1 as well for consistency. The main drawback of YAML 1.1 is that the unquoted literal strings Yes, No, On and Off will be parsed as booleans. We need to be careful to avoid those values in YAML files, until libcamera can switch to YAML 1.2 once more recent versions of libyaml get shipped by the distributions we want to support. This is however not an issue introduced by this change, as the existing YAML 1.2 files were parsed with the YAML 1.1 string literal parsing rules anyway. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-04ipa: rkisp1: Use YAML 1.1 for tuning data filesLaurent Pinchart
YAML 1.2 support has been added in libyaml in version 0.2.3. Debian stable ships version 0.2.2 of libyaml, which causes parse errors of the tuning tuning data files due to the YAML 1.2 directive at the beginning. As we don't use any feature of YAML 1.2, downgrade the data files to YAML 1.1. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-04pipeline: rkisp1: Move ControlInfoMap to IPA moduleLaurent Pinchart
Currently the pipeline handler advertises controls handled by the IPA from a ControlInfoMap it manually constructs. This is wrong, as the IPA module is the component that knows what controls it supports. Fix this by moving the ControlInfoMap construction to the IPA module, and pass it to the pipeline handler as a return value from the IPA init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
2022-08-03libcamera: pipeline: simple: Add support for NXP ISILaurent Pinchart
Several NXP i.MX8 SoCs (such as the i.MX8MN and i.MX8MP) contain a camera pipeline made of sensor interfaces (with parallel and/or CSI-2 receivers) and an image processing engine named ISI. The ISI contains an input crossbar switch and one or more processing pipelines capable of format conversion and scaling. This is a good candidate for the simple pipeline handler as a first step. The i.MX8MP should eventually graduate to having its own pipeline handler as it also contains two ISP instances (supported by the rkisp1 driver). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: pipeline: simple: Don't disable links carrying other streamsLaurent Pinchart
If a subdev supports the internal routing API, pads unrelated to the pipeline for a given camera sensor may carry streams for other cameras. The link setup logic is updated to take this into account, by avoiding disabling links to unrelated pads. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: pipeline: simple: Walk pipeline using subdev internal routingPhi-Bang Nguyen
When traversing the media graph to discover a pipeline from the camera sensor to a video node, all sink-to-source paths inside subdevs are considered. This can lead to invalid paths being followed, when a subdev has restrictions on its internal routing. The V4L2 API supports exposing subdev internal routing to userspace. Make use of this feature, when implemented by a subdev, to restrict the internal paths to the currently active routes. If a subdev doesn't implement the internal routing operations, all source pads are considered, as done today. This change is needed to properly support multiple sensors with devices such as the NXP i.MX8 ISI or the MediaTek i350 and i500 SENINF. Support for changing routes dynamically will be added later when required. Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: pipeline: simple: Setup links in the context of sink entitiesLaurent Pinchart
To setup links the pipeline handler iterates over all entities in the pipeline and disables all links but the ones we want to enable. Some entities don't allow multiple sink links to be enabled, so the iteration needs to be based on sink entities, disabling all their links first and then enabling the sink link that is part of the pipeline. The loop implementation iterates over all Entity instances, and uses their source link to locate the MediaEntity for the connected sink. The sink entity is then processed in the context of the source's loop iteration. This prevents the code from being able to access extra information about the sink entity, as we only have access to the MediaEntity, not the Entity. To prepare for subdev routing support that will require accessing additional entity information, refactor the loop to process the sink entity in the context of its Entity instance. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: pipeline: simple: Reset routing table of subdevsJacopo Mondi
Reset the routing table of subdevices supporting the V4L2 streams API to its default state when initializing the pipeline handler. This avoids issues caused by usage of leftover state. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: v4l2_subdevice: Add support for the V4L2 subdev routing APIJacopo Mondi
Extend the V4L2Subdevice class to support getting and setting routing tables. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: v4l2_subdevice: Collect subdev capabilitiesJacopo Mondi
Collect subdev capabilities at open() time. Model the V4L2SubdevCapabilties as V4L2Capability from the video device class. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-03libcamera: v4l2_subdevice: Change V4L2Subdevice::WhenceJacopo Mondi
The V4L2Subdevice::Whence enumerations defines two values that should correspond to the V4L2_SUBDEV_FORMAT_ACTIVE and V4L2_SUBDEV_FORMAT_TRY definitions. The V4L2 symbols are defined as: V4L2_SUBDEV_FORMAT_TRY = 0, V4L2_SUBDEV_FORMAT_ACTIVE = 1, While the libcamera defined enumeration is: enum Whence { ActiveFormat, TryFormat, } As V4L2Subdevice::Whence values are used to populate data types defined in v4l2-subdev.h used as arguments to VIDIOC_SUBDEV_* ioctls, the V4L2Subdevice class is required to adjust their value as: subdevFmt.which = whence == ActiveFormat ? V4L2_SUBDEV_FORMAT_ACTIVE : V4L2_SUBDEV_FORMAT_TRY; Drop the adjustment by defining : Whence::TryFormat = V4L2_SUBDEV_FORMAT_TRY; Whence::ActiveFormat = V4L2_SUBDEV_FORMAT_ACTIVE; Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-03libcamera: formats: Add AVUY8888 and XVUY8888 formatsLaurent Pinchart
Add missing 32-bit packet YUV 4:4:4 formats. These formats are used by the i.MX8 ISI driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: yaml_parser: Return nullopt on errorJacopo Mondi
The YamlParser::getList<>() function returns an std::optional<> to allow callers to identify cases where parsing the .yaml file failed from cases where the parsed list is just empty. The current implementation returns a default constructed std::optional in case of errors with return {}; The returned value is thus equal to std::nullopt, but the code can be easily misinterpreted as returning an empty vector by a reader. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-03libcamera: formats: Map V4L2_PIX_FMT_JPEG to formats::MJPEGJacopo Mondi
The V4L2_PIX_FMT_JPEG and V4L2_PIX_FMT_MJPEG formats are under-specified and are used interchangeably by kernel drivers. Map both of them to formats::MJPEG and use the newly re-introduced V4L2VideoDevice::toV4L2PixelFormat() to map to the one actually used by the video device. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_videodevice: Match formats supported by the deviceJacopo Mondi
Now that V4L2PixelFormat::fromPixelFormat() returns a list of formats to chose from, select the one supported by the video device by matching against the list of supported pixel formats. The first format found to match one of the device supported ones is returned. As the list of pixel formats supported by the video device does not change at run-time, cache it at device open() time. Maximize the lookup efficiency by storing the list of supported V4L2PixelFormat in an std::unordered_set<>. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_pixelformat: Return the list of V4L2 formatsJacopo Mondi
Multiple V4L2 formats can be associated with a single PixelFormat. Now that users of V4L2PixelFormat::fromPixelFormat() have been converted to use V4L2VideoDevice::toV4L2PixelFormat(), return the full list of V4L2 formats in order to prepare to match them against the ones supported by the video device. The V4L2 compatibility layer, not having any video device to interact with, is converted to use the first returned format unconditionally. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_videodevice: Reintroduce toV4L2PixelFormat()Jacopo Mondi
This is a partial revert of commit 395d43d6d75b ("libcamera: v4l2_videodevice: Drop toV4L2PixelFormat()") The function was removed because it incorrectly maps non-contiguous V4L2 format variants (ie V4L2_PIX_FMT_YUV420M) to the API version supported by the video device (singleplanar API and multiplanar API). It was decided at the time to remove the function and let its users call directly V4L2PixelFormat::fromPixelFormat() which accepts a 'multiplanar' flags. As we aim to associate multiple V4L2PixelFormat to a single libcamera format, the next patches will verify which of them is actually supported by the video device. For now, return the contiguous version unconditionally. Re-introduce V4L2VideoDevice::toV4L2PixelFormat() and convert all the V4L2PixelFormat::fromPixelFormat() users to use it. The V4L2 compatibility layer is the only outlier as it doesn't have a video device to poke, hence it still uses V4L2PixelFormat::fromPixelFormat(). Next patches will implement the device format matching logic and handle the non-contiguous plane issue in V4L2VideoDevice::toV4L2PixelFormat(). Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: formats: Merge V4L2 single and multi formatsJacopo Mondi
To each libcamera PixelFormat two V4L2 formats are associated, the 'single' and 'multi' format variants. The two versions list plane contiguous and non-contiguous format variants, and an optional argument to V4L2PixelFormat::fromPixelFormat() was used to select which one to pick. In order to prepare to remove V4L2PixelFormat::fromPixelFormat(), and considering that no caller in the codebase uses the non-contiguous format variant, merge the two formats vectors in a single one and default the selection to the first available one, which is functionally equivalent to what is currently implemented. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()Jacopo Mondi
The PixelFormatInfo::info(const V4L2PixelFormat &format) function returns the PixelFormatInfo associated with a V4L2 pixel format. As the pixelFormatInfo map is indexed using PixelFormat and a V4L2 format can easily be converted to a PixelFormat, simply return the info() function overload instead of maintaining two similar implementations of the same function. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-02ipa: raspberrypi: Reset embedded data parser on configureDavid Plowman
When we switch camera mode following a pipeline reconfiguration, the embedded data parser should be "reset" to discard any data that it may have cached and that might now be invalid. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-29ipa: raspberry: awb: Include <functional>Jacopo Mondi
Building on gcc8 on Debian 10 fails with asyncThread_ = std::thread(std::bind(&Awb::asyncFunc, this)); ../src/ipa/raspberrypi/controller/rpi/awb.cpp:177:34: note: ‘std::bind’ is defined in header ‘<functional>’; did you forget to ‘#include <functional>’? Fix that by including <functional> in awb.cpp. Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost") Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/414 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-28ipa: raspberrypi: Add functional include to pwl.hEric Curtin
The Pwl class uses std::function, defined in <functional>, without including the header directly. This results in a compilation error with the Fedora 36 compiler toolchain (gcc 12.1.1): In file included from ../src/ipa/raspberrypi/controller/rpi/awb.h:14, from ../src/ipa/raspberrypi/controller/rpi/awb.cpp:14: ../src/ipa/raspberrypi/controller/rpi/../pwl.h:97:18: error: 'std::function' has not been declared 97 | void map(std::function<void(double x, double y)> f) const; | ^~~ Fix it by including <functional>. Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost") Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28libcamera: Drop unnecessary typename keyword used with std::enable_if_tLaurent Pinchart
Usage of the std::enable_if_t type doesn't need to be prefixed by typename. Drop the unnecessary keyword. Reported-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28ipa: raspberrypi: Remove unused Controller constructorNaushir Patuck
The Controller(char const *jsonFilename) is not valid anymore since Controller::read() can now return an error on a failure. Additionally, this constructor is not actually used, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of ColorProcessing controlFlorian Sylvestre
Add ColorProcessing algorithm that is in charge to manage brightness, contrast and saturation controls. These controls are currently based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Filter controlFlorian Sylvestre
Denoise and Sharpness filters will be applied by RkISP1 during the demosaicing step. The denoise filter is responsible for removing noise from the image, while the sharpness filter will enhance its acutance. Add filter algorithm with denoise and sharpness values based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Defect Pixel Cluster Correction controlFlorian Sylvestre
The Defect Pixel Cluster Correction algorithm is responsible to minimize the impact of defective pixels. The on-the-fly method is actually used, based on coefficient provided by the tuning file. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Lens Shading Correction controlFlorian Sylvestre
The Lens Shading Correction algorithm applies multipliers to all pixels to compensate for the lens shading effect. The coefficients are specified in a downscaled table in the YAML tuning file. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Gamma Sensor Linearization controlFlorian Sylvestre
The GammaSensorLinearization algorithm linearizes the sensor output to compensate the sensor non-linearities by applying piecewise linear functions to the red, green and blue channels. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28libcamera: base: utils: Provide defopt to simplify std::optional::value_or() ↵Laurent Pinchart
usage The std::optional<T>::value_or(U &&default_value) function returns the contained value if available, or default_value if the std::optional has no value. If the desired default value is a default-constructed T, the obvious option is to call std::optional<T>::value_or(T{}). This approach has two drawbacks: - The \a default_value T{} is constructed even if the std::optional instance has a value, which impacts efficiency. - The T{} default constructor needs to be spelled out explicitly in the value_or() call, leading to long lines if the type is complex. Introduce a defopt variable that solves these issues by providing a value that can be passed to std::optional<T>::value_or() and get implicitly converted to a default-constructed T. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28cam: sdl_sink: Pass a Span<const uint8_t> to SDLTexture::update()Laurent Pinchart
The SDLTexture::update() function isn't meant to modify the data it receives. Make the Span type const to ensure this at compile time. While at it, pass the Span by value instead of reference, as a Span is only a pointer and size, which will fit in registers and will avoid pointer dereferences in the callee. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28cam: sdl_sink: Use libjpeg over SDL2_imageEric Curtin
We were using the libjpeg functionality of SDL2_image only, instead just use libjpeg directly to reduce our dependancy count, it is a more commonly available library. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28ipa: raspberrypi: agc: Use YamlObject::getList()Laurent Pinchart
Replace the manual implementation of the readList() functions with YamlObject::getList(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28libcamera: yaml_parser: Add getList() functionFlorian Sylvestre
Allow to retrieve a YAML list of any already supported types in a std::vector. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: raspberrypi: Convert existing cameara tuning files to version 2.0Naushir Patuck
Use the convert_tuning.py script to convert all existing tuning files to version 2.0. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>