| Age | Commit message (Collapse) | Author |
|---|
|
The return value of a read() call is mistakenly checked for nonzero
rather than less than zero. Fix this.
Fixes: df23ab95f3d7 ("libcamera: process: fix compilation on Chromium OS")
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit 3d20beca6616 ("libcamera: Add Process and ProcessManager
classes") causes the build to fail in the Chromium OS build environment,
because the return values of some function calls marked with the
__warn_unused_result__ attribute are ignored. Fix this.
Fixes: 3d20beca6616 ("libcamera: Add Process and ProcessManager classes")
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the dummy IPA that needs isolation to meson. At the same time, clean
up the IPA meson to facilitate adding more IPAs.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a dummy IPA that needs to be isolated.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Make IPAManager isolate an IPA in a Proxy if the IPA's license is not
open source, before returning the IPA to the caller. For now, only use
the default Linux IPA proxy, and only LGPL 2.1+ is considered open
source.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a skeletal default linux IPA proxy. It currently lacks the IPA proxy
protocol itself.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an IPAProxy class whose implementations will act as a proxy between a
pipeline handler and an isolated IPA interface. Also add an IPAProxyFactory
that will construct the IPAProxy implementations as necessary.
Update Doxygen to ignore the directory where IPAProxy implementations will
reside.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a Process class to abstract a process, and a ProcessManager singleton
to monitor and manage the processes.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method to IPAModule to check if the module is open source.
This uses the license field of the member IPAModuleInfo.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a field to IPAModuleInfo to contain the license of the module.
This license field will be used to determine whether the IPA module
should be run in an isolated process or not. If the license is open
source, then the IPA module will be allowed to run without process
isolation, if the user enables it. If the license is not open source,
then the IPA module will be run with process isolation.
Update the dummy IPA and IPA test to conform to the new struct layout.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently the log file and the log level can only be set via environment
variables, but applications may also want to set the log file and the
log level at run time. Provide an API for this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SlotBase implementation stores the receiver object pointer as a void
pointer internally. The pointer is then cast back to an Object pointer
when the receiver object class derives from Object. When the receiver is
an object that inherits from both the Object class and other classes,
the Object data members may not be stored at the beginning of the object
memory. The cast back to an Object pointer is thus incorrect.
Fix this by casting the receiver object pointer to an Object pointer
where the type of the receiver object is known, and pass it along with
the receiver void pointer to the SlotBase class. The SlotBase class
stores both pointers internally, and doesn't need the isObject_ field
anymore as the same information is obtained from checking if the Object
pointer is null.
To avoid confusing the two pointers, use the same naming scheme through
the whole implementation: "obj" points to a receiver object as an
unknown type, and "object" to the receiver object cast to an Object. The
latter is null when the receiver object doesn't inherit from the Object
class.
To further clarify the code, remove direct access to the SlotBase "obj"
and "object" fields as much as possible. They are replaced by two new
methods :
- SlotBase::disconnect() to disconnect a signal from the slot's receiver
object
- SlotBase::match() to test if an object pointer matches the slot
The match() method is a template method with a specialisation for the
Object type, to compare either the obj or the object pointer depending
on the type of the parameter. This is required as the Object destructor
calls the SignalBase::disconnect() method for signal connected to the
object, and passes a pointer to Object to that method, while the actual
object may have a different address due to the issue explained above.
The pointer must thus be compared with the stored Object pointer in that
case, not to the pointer to the receiver object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow signals to cross thread boundaries by posting them to the
recipient through messages instead of calling the slot directly when the
recipient lives in a different thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Create a new Message class to model a message that can be passed to an
object living in another thread. Only an invalid message type is
currently defined, more messages will be added in the future.
The Thread class is extended with a messages queue, and the Object class
with thread affinity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The new Thread class wraps std::thread in order to integrate it with the
Object, Signal and EventDispatcher classes. By default new threads run
an internal event loop, and their run() method can be overloaded to
provide a custom thread loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit b817bcec6b53 ("libcamera: Auto generate version information")
causes the build to fail in the Chromium OS build environment, because
git update-index tries to take a lock (ie. write) in the git repo that
is outside of the build directory.
The solution is to simply skip git update-index if we are building in
the Chromium OS build environment, and this decision is made if the
build directory is not a subdirectory of the source directory.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit b817bcec6b53 ("libcamera: Auto generate version information")
generates version information in order to automatically include it
various locations (Sphinx and Doxygen documentation, libcamera::version
variable available at runtime, and version.h available at compile time).
Unfortunately this causes lots of unnecessary rebuilds when modifying
the git tree state, which hinders development.
The problem is caused by the generated version.h being listed as a
dependency for the whole libcamera. This is required as meson (to the
best of my knowledge) doesn't provide a way to explicitly specify the
dependency of a single object file (camera_manager.o in this case, as
camera_manager.cpp is the only consumer of the generated version string)
on the custom target used to generate version.h. The dependency can't be
automatically detected at build time, like dependencies on normal
headers that are generated by parsing the source, because the version.h
header may not exist yet. The build could then fail in a racy way.
This change attempts at solving the issue by generating a version.cpp
instead of a version.h to set the git-based version. This minimises the
number of files that need to be rebuild when then git tree state
changes, while retaining the main purpose of the original automatic
version generation, the ability to access the git-based version string
at runtime. We however lose the ability to access git-based version
information at build time in an application building against libcamera,
but there is no expected use case for this.
The version string is moved from the libcamera namespace to the
CameraManager class in order to avoid including version.h inside
libcamera (in version.cpp and in camera_manager.cpp), which would create
dependencies causing more rebuild steps, as described above.
On the other hand, major, minor and patch level version numbers are
useful at build time. This commit changes the generation of version.h in
order to add three macros named LIBCAMERA_VERSION_MAJOR,
LIBCAMERA_VERSION_MINOR and LIBCAMERA_VERSION_PATCH for this purpose.
version.h is not included by any other libcamera header or source file,
and thus doesn't force a rebuild of the library.
The Sphinx and Doxygen documentation keep their git-based version
information, which is set during the configuration of the build and then
doesn't track git commits. We may want to investigate how to improve
this, but given that git-based version for the documentation has very
few use cases outside of tagging nightly builds, this isn't considered
an issue at the moment.
The documentation install directory now uses the base version string, in
order to avoid increasing the number of documentation directories
needlessly. This shouldn't cause any issue as the API should not change
without a change to the version number.
The version number generation and handling code now also standardises
the version variables to not start with a 'v' prefix in meson, in order
to simplify their handling. The prefix is added when generating the
relevant files.
Note that we go back to specifying the fallback version in the main
meson.build, in the call to the project() function. For the time being I
believe this should be a good compromise to avoid unnecessary
recompilation, and moving the fallback version to a different file for
tarball releases can be built on top of this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide an average FPS in the QCam title bar to show the current rate of
frame processing.
The QCam compilation is updated to process the Qt MoC headers to support
signals and slots accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the version string reported by the libcamera library on the qcam
test utility.
This helps confirm the exact version of the library that is being used
while testing.
The version string is stored in the MainWindow so that it can be reused
without reconstructing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The 'last' buffer timestamp is stored as a static. Rename the variable
to a more descritive 'lastBufferTime' and move it to the class instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generate a version string, and provide a global string object which
allows applications to interrogate the current libcamera version
information.
The version header is automatically updated by meson on each build.
The string roughly follows the semver [0] conventions of
major.minor.patch-label as a value.
[0] https://semver.org/
A script (utils/gen-version.sh) is provided which is modelled upon the
processing from autoconf's git-version-gen. The gen-version.sh script
will look for tags in the form vX.Y as starting points for the version
string. While the repository does not have any matching tags, v0.0 will
be assumed, resulting in versions with both major and minor being set to
'0', and the patch count resulting from the number of patches in the
history to that point.
Finally, a uniquely identifying shortened hash is provided from git:
v0.0.509+0ec0edf7
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Group together operations to enumerate formats and operations to handle
memory handling, alternating public and private operations but
respecting the ordering within each group. Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Make elfLoadSymbol more generic by making the symbol size an output
rather than an input. Also move the memcpy out of elfLoadSymbol.
If the size of struct IPAModuleInfo changes between versions, we still
want to be able to load it and perhaps do conversions for backwards
compatibility. In this case the size should not be a restriction when
searching for the symbol.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an error message to tell, if an IPA module failed to load, the
path to the IPA module shared object that was attempted to be loaded.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a method to IPAModule to get the path of the IPA module shared
object that the IPAModule was constructed from.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement control support in the VIMC pipeline handler by dynamically
querying the V4L2 device for the supported V4L2 controls and populating
the list of camera controls accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement control support in the UVC pipeline handler by dynamically
querying the V4L2 device for the supported V4L2 controls and populating
the list of camera controls accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an initial set of controls to demonstrate how controls are defined.
Proper documentation for each control is missing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide a ControlList on request objects to facilitate setting controls.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlList class implements a map from control specifier to control
ID. To avoid constant lookups of ControlInfo when using the class in the
libcamera core or in pipeline handlers, the map uses ControlInfo
pointers instead of ControlId values. This is however not very
convenient for applications or pipeline handlers, as they would be
forced to first look up the ControlInfo pointers for the controls they
want to access. Facilitate ease of use of ControlLists by implementing
an internal lookup of the ControlInfo from the controls provided by the
Camera.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Extend the Camera class to expose the controls it supports. Each
pipeline should generate a list of controls supported by each camera it
creates. These are represented by a ControlInfoMap, and an associated
ControlList of default values.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a set of data types to support controls:
- ControlValue stores a control type and value in a generic way
- ControlId enumerates all the control identifiers
- ControlIdentifier declares the types of a control and map their names
- ControlInfo stores runtime information for controls
- ControlList contains a set of control info and value pairs
The control definitions map is generated from the controls documentation
to ensure that the two will always be synchronised.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a new controls() method to the V4L2Device class to retrieve the map
of all supported controls. This is needed in order to dynamically query
the supported controls, for instance for drivers that support different
sets of controls depending on the device model.
To make the API easier to use, create a type alias for the control ID to
ControlInfo and use it.
Remove the getControlInfo() method that is not used externally, as it
can now be replaced by accessing the full list of controls.
Update the CameraSensor API accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add min() and max() methods to V4L2ControlInfo to report the control's
minimum and maximum value respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Blocking socket operation when receiving messages may lead to long
delays, and possibly a complete deadlock, if the remote side delays
sending of the payload after the header, or doesn't send the payload at
all. To avoid this, make the socket non-blocking and implement a simple
state machine to receive the header synchronously with the socket read
notification. The payload read is still synchronous with the receive()
method to avoid data copies.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To be able to isolate an IPA component in a separate process an IPC
mechanism is needed to communicate with it. Add an IPC mechanism based
on Unix sockets which allows users to pass both data and file descriptors
to and from the IPA process.
The implementation allows users to send both data and file descriptors
in the same message. This allows users to more easily implement
serialization and deserialization of objects as all elements belonging
to an object can be sent in one message.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If a timer is running while it's deleted it is still register with the
event dispatcher. This causes a segmentation fault when the timer
time-out and its signal is emitted. Fix this my stopping the timer when
it's deleted.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Compiling with clang renders errors as a variable-sized arrays are not
allowed to be initialized. Solve this by using memset() for v4l2Ctrls
which is the only one of the two arrays that needs to be zeroed.
../../src/libcamera/v4l2_device.cpp:155:37: error: variable-sized object may not be initialized
const V4L2ControlInfo *controlInfo[count] = {};
^~~~~
../../src/libcamera/v4l2_device.cpp:156:36: error: variable-sized object may not be initialized
struct v4l2_ext_control v4l2Ctrls[count] = {};
^~~~~
../../src/libcamera/v4l2_device.cpp:227:37: error: variable-sized object may not be initialized
const V4L2ControlInfo *controlInfo[count] = {};
^~~~~
../../src/libcamera/v4l2_device.cpp:228:36: error: variable-sized object may not be initialized
struct v4l2_ext_control v4l2Ctrls[count] = {};
^~~~~
Fixes: eb068f4e67eedacd ("libcamera: v4l2_device: Implement get and set controls")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When enumerating the available V4L2 controls at video device open
time set the V4L2_CTRL_FLAG_NEXT_CTRL flag if an unsupported control
type is encountered to prevent infinite loops.
While at it, downgrade the message reporting the unsupported control
type to Debug, as it is not an error worth being reported unconditionally.
Fixes: 030ce6491ed3 ("libcamera: v4l2_device: List valid controls at open")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When using -std=c++11, GCC versions 6.2 and 6.3 take objection to
declaring a struct type when using a range based iterator:
event_dispatcher_poll.cpp:231:13: error: types may not be defined
in a for-range-declaration [-Werror]
for (const struct pollfd &pfd : pollfds) {
^~~~~~
cc1plus: all warnings being treated as errors
Removing the keyword 'struct' ensures that the compiler does not try to
declare the type, and instead uses the type as already defined by the
relevant poll.h header.
This issue does not affect later compiler versions.
Reported-by: [autobuild.buildroot.net] Thomas Petazzoni <thomas.petazzoni@bootlin.com>
http://autobuild.buildroot.net/results/f6dd4c60c04892c8b1669e6000fce7edb2b6349e/
Fixes: 8356f8a6ab87 ("libcamera: Add a poll-based event dispatcher")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
queueRequest() is called after starting the stream.
If it fails, the stream should be stopped, otherwise it can get a
"Device or resource busy" error, due to VIDIOC_REQBUFS ioctls being
called after VIDIOC_STREAMON without VIDIOC_STREAMOFF in-between.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set the ImgU pipe_mode control based on the active stream configuration.
Use 'Video' pipe mode unless the viewfinder stream is not active.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add operations to get and set control and to retrieve the informations
on a V4L2 control. For simple camera sensors, the operations are
directly called on the underlying V4L2 subdevice.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement getControls() and setControls() operations in V4L2Device class.
Both operations take a V4L2Controls instance and read or write the V4L2
controls on the V4L2 device.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Enumerate all the valid controls a device supports at open() time.
A control is valid only if its type is supported.
Store the control information in a map inside the device to save
querying the control when setting or getting its value from the device
and provide an operation to retrieve information by control ID.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add libcamera V4L2 control support, implemented using the V4L2 Extended
Control APIs. This patch defines the types used to create and manage
controls.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Include errno.h header to fix missing definition of -EEXIST error code:
src/libcamera/formats.cpp:43:11: error: use of undeclared identifier 'EEXIST'
Fixes: 1cf709b1d2bb ("libcamera: formats: Add ImageFormats")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The file uses the std::array class but doesn't include the corresponding
header. This breaks compilation with clang and libc++. Fix it.
Fixes: 63c578ed9993 ("libcamera: stream: Add StreamFormats")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that we have V4L2Device and V4L2VideoDevice update the documentation
of the latter to use "video device" every time the term "device" was
used in the V4L2 context.
While at it clean up by removing a stale todo entry.
Documentation only change, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2 devices and subdevices share a few common operations,like
opening and closing a device node, and perform IOCTLs on the device.
With the forthcoming introduction of support for V4L2 controls, the
quantity of shared code will increase, as the control support
implementation is identical for the two derived classes.
To maximize code re-use and avoid duplications, provide a V4L2Device
base class which groups the common operations and members.
The newly introduced base class provides methods to open/close a device
node, access the file descriptor, and perform IOCTLs on the device.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
