| Age | Commit message (Collapse) | Author |
|---|
|
Versions of the ISP differ in the processing blocks they include, as
well as in the implementation of some of those blocks. In particular,
they have different numbers of histogram bins oe AE statistics cells.
The algorithms take these differences into account by checking the ISP
version reported by the driver.
These checks are currently scattered in multiple places. Centralize them
in the IPARkISP1::init() function, and store the version-dependent
hardware parameters in the IPA context, accessible by all algorithms.
While at it, drop the IPASessionConfiguration::hw member that stores the
revision number, unused by the algorithms. It can be added back laer to
the IPAHwSettings structure if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The RkISP1 statistics structure contains multiple arrays whose length
varies depending on the hardware revision. Accessing those arrays is
error-prone, wrap them in spans at the top level to reduce risks of
out-of-bound accesses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
When validating a stream, and no valid packed pixel format can be
found, see if an unpacked format can be used instead.
This is particularly helpful for 8 (and 16) bit raw formats, where
asking for a packed format would previously have failed. Now the
configuration will be adjusted to give you a format (in fact, the only
format) that will work.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
These formats are now defined in upstream GStreamer main branch, so it
is now safe to use their names. Note that libcamera only supports little
endian variants of these formats.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This enables monochrome support in libcamerasrc.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Several functions in libcamera classes are marked as thread-bound,
restricting the contexts in which those functions can be called. There
is no infrastructure to enforce these restrictions, causing difficult to
debug race conditions when they are not met by callers.
As a first step to solve this, add an assertThreadBound() protected
function to the Object class to test if the calling thread context is
valid, and use it in member functions of Object subclasses marked as
thread-bound. This replaces manual tests in a few locations.
The thread-bound member functions of classes that do not inherit from
Object are not checked, and neither are the functions of classes marked
as thread-bound at the class level. These issue should be addressed in
the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Object instances are meant to be deleted from the thread they are bound
to, and this requirement is documented. There are however exceptions to
the rule, as threads may be stopped and restarted, with objects bound to
them not being deleted and recreated for every stop/restart cycle. Bound
objects may therefore need to be deleted after the thread has stopped,
making it impossible to use Object::deleteLater().
Document the lifetime requirements more precisely, and enforce them with
an assertion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Objects can be scheduled for deletion with Object::deleteLater(), which
queues a deferred deletion to the thread's event loop. As the
deleteLater() function is meant to be called from a different thread,
this may race with thread termination, and deferred deletions queued
just before calling Thread::exit() may not be processed by the event
loop. Make sure they get processed when finishing the thread, before
stopping.
This eliminates the race condition that occurs when calling
Object::deleteLater() followed by Thread::exit() from the same thread.
Calling deleteLater() from neither the thread the object is bound to or
the thread calling Thread::exit() is still inherently racy.
The change fixes a failure in the object-delete unit test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The signal.h header doesn't need to include object.h. Replace it with a
forward declaration, and instead include object.h in source files that
require it. It can speed up compilation a little bit, but more
importantly avoids unintended dependencies from the Signal class to the
Object class to be added later as the compiler will catch them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The Object::message() function is documented as thread-bound without
using the correct \threadbound reference. Fix it to ensure it gets
included in the thread safety context list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Clearly all cases in the switch are already satisfied, but some
compilers fail to realize this and spit out an error:
Compiler version: gcc 11.2.0 "aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.11) 11.2.0"
../../src/apps/common/dng_writer.cpp: In function ‘void thumbScanlineIPU3(const FormatInfo&, void*, const void*, unsigned int, unsigned int)’:
../../src/apps/common/dng_writer.cpp:277:55: error: ‘val4’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:48: error: ‘val3’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:41: error: ‘val2’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:34: error: ‘val1’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
Add a default case for the switch-case on a modulo to silence this.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=207
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The sort order used in the table isn't obvious. Reference the source of
linux/media-bus-format.h at the top of the table for reference for
future updates.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support for Mono 12-bit formats were added to the mbusCodeToBayer table
without supplying the corresponding entry for converting the other way.
Add the relevant entry to the bayerToFormat table.
Fixes: ec6309571654 ("libcamera: bayer_format: Add unpacked mono 12-bit format to the conversion table")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move formats::R10_CSI2P to be grouped with the formats::R10 counterpart
and keep the section of format declarations sorted in increasing bit
depth.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the relevant definitions for a 16-bit mono pixel and media-bus
format.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Commit e0a51061bc69 ("libcamera: formats: Add 14-bits Bayer RAW
formats") added an empty formats.c file by mistake (and we failed to
catch it during review). Delete it.
Fixes: e0a51061bc69 ("libcamera: formats: Add 14-bits Bayer RAW formats")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Vc4CameraData::findMatchBuffers() may return successfully with a null
embedded buffer, in which case the embedded buffer id would be left
uninitialized.
Without this change, libcamera v0.2.0 usually crashes for me with an
assertion error:
ipa_base.cpp:397 assertion "it != buffers_.end()" failed in prepareIsp()
Signed-off-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change to the build system will prepend the plugin build directory
to GST_PLUGIN_PATH environment. This makes the built plugin visible to
GStreamer inside meson devenv enabling uninstalled testing. In order to
avoid polluting the user registry, the GST_REGISTRY environment is also
set.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation is effectively the same, but we should be pointing
to the actively supported and used Qt version.
Signed-off-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The streams API needs to be enabled explictly by setting a subdev client
capability. Do so unconditionally for subdevs that expose streams
support. We don't need any kernel version check to use the
VIDIOC_SUBDEV_S_CLIENT_CAP ioctl, as it is guaranteed to be supported by
kernels that support streams.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraSensorHelperFactory::createInstance() function overrides a
virtual function from CameraSensorHelperFactoryBase. The function
declaration doesn't mark it with the override keyword. This could cause
issues in the future if the base class' function changes, as the
compiler will not issue any warning in that case. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The classes Rectangle, Size and SizeRange are referenced with \struct in
the doxygen comments in geometry.cpp. Correct the reference to \class
to better reflect their definition.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All the Raspberry Pi official camera tuning files are updated for
HDR. As stated previously, there is no mechanism in the hardware for
combining images so all this does is enable multi-channel AGC to
produce short and long exposure frames. It will be up to the
application to deal with them.
The changes are identical in every tuning file.
1. The existing AGC tuning is duplicated twice so that we have 3 AGC
channels.
2. The first is left alone (the default AGC channel), the second is
tweaked to under-expose significantly (ev -3) and the final one is
tweaked to over-exposure slightly (ev +0.5)
3. Control parameters are provided to the "rpi.hdr" algorithm to
associate these AGC channels correctly with the HDR modes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sufficient plumbing is added so that the HDR mode control can be used
to engage HDR modes on platforms that support them. On the vc4
platform, this allows multi-channel AGC to run, though there is no
image merging.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The vector in question is destroyed when the item in the `buffers_` map
is destroyed as a result of the `erase()` call. A vector's destructor
already does all the things that `clear()` does,
so calling it earlier is not needed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When activating both ISP nodes on the i.MX8MP, but only connecting one
camera sensor, libcamera aborts because it couldn't find the chosen
entity's device node:
[37:54:40.779902250] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media1: rkisp1
[37:54:40.780196750] [3631] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:54:40.780237875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media0: rkisp1
[37:54:40.780505125] [3631] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:54:40.780599875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:312 Successful match for media device "rkisp1"
[37:54:40.780731375] [3631] ERROR V4L2 v4l2_device.cpp:93 'rkisp1_isp': Failed to open V4L2 device '': No such file or directory
Fix this by skipping empty device nodes:
[37:49:05.172672000] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media1 found
[37:49:05.172720625] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media1: rkisp1
[37:49:05.172973875] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:49:05.173012125] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media0: rkisp1
[37:49:05.173281625] [3603] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:49:05.173376875] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:107 Skip rkisp1_isp: no device node
[37:49:05.173414375] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:316 Successful match for media device "rkisp1"
[37:49:05.173671250] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video1[15:cap]: Opened device platform:rkisp1: rkisp1: rkisp1_stats
[37:49:05.173775125] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video2[16:out]: Opened device platform:rkisp1: rkisp1: rkisp1_params
[37:49:05.173880500] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video0[18:cap]: Opened device platform:rkisp1: rkisp1: rkisp1
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The capture_test.cpp file was added in the source list of meson in the
wrong place. Fix it so the list is alphabetically sorted.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the OV64A40 tuning files for the Arducam Omnivision camera
module to operate on the VC4 ISP architecture on Raspberry Pi 4 and
below.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a CameraSensorHelper for the OV64A40 camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the OV64A40 sensor with a camera helper to manage the gain
model, light sensitivity, and control delays.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel
size of 1.008µ.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement the StatsOutputEnable control for the VC4 IPA. When set,
this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput
metadata control.
To get this working, IpaBase::libcameraMetadata_ is moved from a private
to a protected member variable. This makes it accessable to the VC4
derived IPA class.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific
vendor controls.
Define a control StatsOutputEnable to allow the ISP hardware statistics
to be output through metadata via the Bcm2835StatsOutput control. The
implementation of these controls will follow in a subsequent patch.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to get reasonable default colour gains before AWB
has run. This is particularly important on the PiSP platform where
these numbers are helpful in programming the Front End statistics
block in advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to discover the correct black level values even
before any frames have been processed. This is important on the PiSP
platform where the front end black level blocks must be programmed in
advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't assert when taking the weighted mean of a zero-width or
zero-weight interval; return its upper bound. That is certainly
correct in the zero-width case, and plausible otherwise.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The gst_clear_event() function used by libcamerasrc has been introduced
in GStreamer 1.16, while libcamera claims to need 1.14 or newer. This
causes a compilation error. Fix it by copying the gst_clear_event()
implementation to gstlibcamera-utils.h when compiling with older
GStreamer version.
The version check makes it clear that the workaround is needed with
older versions only, flagging it for removal when the minimum GStreamer
version requirement will be bumped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
lc-compliance depends on support for skipping tests in gtest (commit
00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum
version for the gtest dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Advertise hardware constraints on the pixel processing rate through the
Controller::HardwareConfig structure. When calculating the minimum line
length during a configure() operation, ensure that we don't exceed this
constraint.
If we do exceed the hardware constraints, increase the modes's minimum
line length so the pixel processing rate falls below the hardware limit.
If this is not possible, throw a loud error message in the logs.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When converting from StreamConfiguration to V4L2DeviceFormat, the stride
was being dropped with the result that users could not request a custom
stride.
Set the stride in the V4L2DeviceFormat to prevent this happening.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When compiling with gcc 8.4.0, the compiler was reported to throw an
unused variable warning:
../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’:
../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable]
for (auto [i, cfg] : utils::enumerate(config_)) {
^
The build environment may have been incorrect as the problem couldn't be
reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is
indeed unused. It turns out that the code can be simplified, as the
commit that removed usage of the variable kept the now unneeded
utils::enumerate() call.
Simplify the code and fix the warning in one go.
Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting with meson 0.59, the custom_target() function substitutes
'@BASENAME@' in the output parameter with the input file name, with the
extension removed. This is exactly what we implement manually when
generating the IPA interface .cpp files.
Furthermore, starting with meson 0.60, the 'name' positional parameter
to the custom_target() function is optional, and defaults to the
basename of the output file (including the extension). This is exactly
the name we compute manually and pass to the function.
As libcamera requires meson 0.60 or newer, we can depend on those two
features and drop manual computation of the base name. This fixes a
warning with recent meson versions that complain that passing a file
object to the format() function is a broken feature:
WARNING: Broken features used:
* 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'}
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This commit implements renegotiation of the camera configuration and
source pad caps. A renegotiation can happen when a downstream element
decides to change caps or the pipeline is dynamically changed.
To handle a renegotiation the GST_FLOW_NOT_NEGOTIATED return value has
to be handled in GstLibcameraSrcState::processRequest(). Otherwise the
default would be to print an error and stop streaming.
To archive this in a clean way the if statement is altered into a switch
statement which now also has a case for GST_FLOW_NOT_NEGOTIATED. In the
case of GST_FLOW_NOT_NEGOTIATED every source pad is checked for the
reconfiguration flag with gst_pad_needs_reconfigure() which does not
clear this flag. If at least one pad requested a reconfiguration the
function returns without an error and the renegotiation will happen
later in the running task. If no pad requested a reconfiguration then
the function will return with an error.
In gst_libcamera_src_task_run() the source pads are checked for the
reconfigure flag by calling gst_pad_check_reconfigure() and if one pad
returns true and the caps are not sufficient anymore then the
negotiation is triggered. It is fine to trigger the negotiation after
only a single pad returns true for gst_pad_check_reconfigure() because
the reconfigure flags are cleared in the gst_libcamera_src_negotiate()
function.
If any pad requested a reconfiguration the following will happen:
1. The camera is stopped because changing the configuration may not
happen while running.
2. The completedRequests queue will be cleared by calling
GstLibcameraSrcState::clearRequests() because the completed buffers
have the wrong configuration.
3. The new caps are negotiated by calling gst_libcamera_src_negotiate().
When the negotiation fails streaming will stop.
4. The camera is started again.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a clearRequests() function to GstLibcameraSrcState which clears the
GstLibcameraSrcState::completedRequests_ queue.
Use this new function in gst_libcamera_src_task_leave() instead of doing
it manually.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the code which negotiates all the source pad caps into a separate
function called gst_libcamera_src_negotiate(). When the negotiation
fails this function will return false and true otherwise.
Use this function instead of doing the negotiation manually in
gst_libcamera_src_task_enter() and remove the now redundant error
handling code accordingly.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We make a few small improvements to the code:
* The arrayToSet method is prevented from overwriting the end of the
array if there are too many values in the input table. If you supply
a table, it will force you to put the correct number of elements in
it.
* The arrayToSet and setStrength member functions are turned into
static functions. (There may be a different public setStrength
member function in future.)
* When no tables at all are given, the configuration is flagged as
being disabled, so that we can avoid copying tables full of zeroes
around. As a consequence, the pipeline handler too will disable this
hardware block rather than run it needlessly. (Note that the tuning
tool will put in a completely empty "rpi.cac" block if no CAC tuning
images are supplied, benefiting from this behaviour.)
* The initialise member function is removed as it does nothing.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change where time-filtering is done before sorting out the
digital gain means that the target exposure without digital gain is no
longer set, breaking the 'AeLocked' calculation.
We can use the regular (full) target exposure instead.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain")
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Label draft controls and properties through the "draft" vendor tag
and deprecate the existing "draft: true" mechanism. This uses the new
vendor tags mechanism to place draft controls in the same
libcamera::controls::draft namespace and provide a defined control id
range for these controls. This requires moving all draft controls from
control_ids.yaml to control_ids_draft.yaml.
One breaking change in this commit is that draft control ids also move
to the libcamera::controls::draft namespace from the existing
libcamera::controls namespace. This is desirable to avoid API breakages
when adding new libcamera controls. So, for example, the use of
controls::NOISE_REDUCTION_MODE will need to be replaced with
controls::draft::NOISE_REDUCTION_MODE.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ranges.yaml file that is used to reserve control id
ranges/offsets for libcamera and vendor specific controls. This file is
used by the gen-controls.py script to generate control id values for
each control.
Draft controls now have a separate range from core libcamera controls,
breaking the existing numbering behaviour.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
