| Age | Commit message (Collapse) | Author |
|---|
|
Use DRM FourCC values for the newly defined PixelFormat.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If there is only one camera exposed by libcamera, there is little value
in asking the user to choose it.
Automatically select it, and remove the need to ask the user to select
'ok' from a Dialog box.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The QtEventDispatcher timers implementation depends on Qt 5.9 or newer
due to the use of QObject::startTimer(std::chrono::milliseconds).
Support earlier Qt versions by using the QObject::startTimer(int)
version instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The libcamera timers are single-shot timers. They are started with a
duration, but fire once only, not based on an interval. Remove the
interval concept by removing the interval() method, and rename other
occurences of interval to duration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The timer signal was never emitted in QtEventDispatcher::timerEvent(),
this results in timers not working as designed running under the Qt
event loop. Fix this by emitting the signal on timeout.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Stopping the timer will reset the Timer::deadline_ field to 0 fixing
potential bugs and call QtEventDispatcher::unregisterTimer() which will
take care of the cleanup.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If an unregistered timer is given to QtEventDispatcher::unregisterTimer()
an error is printed and Qt gets confused and locks up. Fix this by
following the libcamera documentation that passing a unregistered timer
is a no-op.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When setting the format on the ViewFinder, a new image_ is allocated.
Any change in format deletes the existing allocation, but it is not
cleaned up on shutdown:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f0bf8a7e17f in operator new(unsigned long) (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x10e17f)
#1 0x564c7205f7b0 in ViewFinder::setFormat(unsigned int, unsigned int, unsigned int) ../src/qcam/viewfinder.cpp:43
#2 0x564c71fec467 in MainWindow::startCapture() ../src/qcam/main_window.cpp:152
#3 0x564c71fe6c1a in MainWindow::MainWindow(libcamera::CameraManager*, OptionsParser::Options const&) ../src/qcam/main_window.cpp:40
#4 0x564c71fdf133 in main ../src/qcam/main.cpp:76
#5 0x7f0bf5944b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Provide a ViewFinder destructor, and delete the allocation as
appropriate.
Fixes: 97e8b3a2eb32 ("qcam: Add Qt-based GUI application")
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
gcc-9 has introduced a deprecated-copy warning that is triggered by Qt
header files. The issue has been fixed in Qt 5.13. Fix compilation with
earlier Qt versions by disabling the warning. In order to still benefit
from the warning when possible, only disable it for gcc-9 and Qt < 5.13.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraManager class is not supposed to be instantiated multiple
times, which led to a singleton implementation. This requires a global
instance of the CameraManager, which is destroyed when the global
destructors are executed.
Relying on global instances causes issues with cleanup, as the order in
which the global destructors are run can't be controlled. In particular,
the Android camera HAL implementation ends up destroying the
CameraHalManager after the CameraManager, which leads to use-after-free
problems.
To solve this, remove the CameraManager::instance() method and make the
CameraManager class instantiable directly. Multiple instances are still
not allowed, and this is enforced by storing the instance pointer
internally to be checked when an instance is created.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass the CameraManager instance from the main() function to the
MainWindow class instead of accessing it through
CameraManager::instance(). This prepares for the removal of the
CameraManager::instance() method.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera manager is stopped both in the destructor of the MainWindow
class and in the main() function. This double stop isn't needed, remove
the former and keep the latter as the manager is started in the main()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a '-s|--size' option to qcam to allow selecting the stream
resolution using a command line option.
If the sizes are not supported by the camera, they get automatically
adjusted and the user notified via an output message.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Buffer instances reference memory, which is modelled internally by a
BufferMemory instance. Store a pointer to the BufferMemory in the Buffer
class, and populate it when the buffer is queued to the camera through a
request. This is useful for applications to access the buffer memory in
the buffer or request completion handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
All interactions with the Stream's buffers currently go through the
BufferPool. In order to shorten accessing the buffers array, and eventually
restrict access to the Stream's internal buffer pool, provide operations to
access, create and destroy buffers.
It is still possible to access the pool for pipeline handlers to
populate it by exporting buffers from a video device to Stream's pool.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The cam and qcam applications, as well as the camera capture test case,
access the Stream::bufferPool in order to know how many requests to
initially queue. As part of an effort to remove access to the buffer
pool from applications, use the buffer count from the stream
configuration instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Buffer class is a large beast the stores information about the
buffer memory, dynamic metadata related to the frame stored in the
buffer, and buffer reference data (in the index). In order to implement
buffer import we will need to extend this with dmabuf file descriptors,
making usage of the class even more complex.
Refactor the Buffer class by splitting the buffer memory information to
a BufferMemory class, and repurposing the Buffer class to reference a
buffer and to store dynamic metadata. The BufferMemory class becomes a
long term storage, valid and stable from the time buffer memory is
allocated to the time it is freed. The Buffer class, on the other hand,
becomes transient, is created on demand when an application requires a
buffer, is given to a request, and is deleted when the request
completes.
Buffer and BufferMemory don't need to be copied, so their copy
constructor and assignment operators are deleted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit b817bcec6b53 ("libcamera: Auto generate version information")
generates version information in order to automatically include it
various locations (Sphinx and Doxygen documentation, libcamera::version
variable available at runtime, and version.h available at compile time).
Unfortunately this causes lots of unnecessary rebuilds when modifying
the git tree state, which hinders development.
The problem is caused by the generated version.h being listed as a
dependency for the whole libcamera. This is required as meson (to the
best of my knowledge) doesn't provide a way to explicitly specify the
dependency of a single object file (camera_manager.o in this case, as
camera_manager.cpp is the only consumer of the generated version string)
on the custom target used to generate version.h. The dependency can't be
automatically detected at build time, like dependencies on normal
headers that are generated by parsing the source, because the version.h
header may not exist yet. The build could then fail in a racy way.
This change attempts at solving the issue by generating a version.cpp
instead of a version.h to set the git-based version. This minimises the
number of files that need to be rebuild when then git tree state
changes, while retaining the main purpose of the original automatic
version generation, the ability to access the git-based version string
at runtime. We however lose the ability to access git-based version
information at build time in an application building against libcamera,
but there is no expected use case for this.
The version string is moved from the libcamera namespace to the
CameraManager class in order to avoid including version.h inside
libcamera (in version.cpp and in camera_manager.cpp), which would create
dependencies causing more rebuild steps, as described above.
On the other hand, major, minor and patch level version numbers are
useful at build time. This commit changes the generation of version.h in
order to add three macros named LIBCAMERA_VERSION_MAJOR,
LIBCAMERA_VERSION_MINOR and LIBCAMERA_VERSION_PATCH for this purpose.
version.h is not included by any other libcamera header or source file,
and thus doesn't force a rebuild of the library.
The Sphinx and Doxygen documentation keep their git-based version
information, which is set during the configuration of the build and then
doesn't track git commits. We may want to investigate how to improve
this, but given that git-based version for the documentation has very
few use cases outside of tagging nightly builds, this isn't considered
an issue at the moment.
The documentation install directory now uses the base version string, in
order to avoid increasing the number of documentation directories
needlessly. This shouldn't cause any issue as the API should not change
without a change to the version number.
The version number generation and handling code now also standardises
the version variables to not start with a 'v' prefix in meson, in order
to simplify their handling. The prefix is added when generating the
relevant files.
Note that we go back to specifying the fallback version in the main
meson.build, in the call to the project() function. For the time being I
believe this should be a good compromise to avoid unnecessary
recompilation, and moving the fallback version to a different file for
tarball releases can be built on top of this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide an average FPS in the QCam title bar to show the current rate of
frame processing.
The QCam compilation is updated to process the Qt MoC headers to support
signals and slots accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the version string reported by the libcamera library on the qcam
test utility.
This helps confirm the exact version of the library that is being used
while testing.
The version string is stored in the MainWindow so that it can be reused
without reconstructing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The 'last' buffer timestamp is stored as a static. Rename the variable
to a more descritive 'lastBufferTime' and move it to the class instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of manually adding the libcamera library and include path to
every target that requires it, declare a dependency that groups the
headers as source, the library and the include path, and use it through
the project. This simplifies handling of the dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for specialising the CameraConfiguration class in pipeline
handlers, return a pointer to a camera configuration instead of a
reference from Camera::generateConfiguration(). The camera configuration
always needs to be allocated from the pipeline handler, and its
ownership is passed to the application.
For symmetry, change Camera::configure() to take a CameraConfiguration
pointer instead of a reference. This aligns with our coding practice of
passing parameters that are modified by the callee by pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Refactor the CameraConfiguration structure to not rely on Stream
instances. This is a step towards making the camera configuration object
more powerful with configuration validation using "try" semantics.
The CameraConfiguration now exposes a simple vector-like API to access
the contained stream configurations. Both operator[]() and at() are
provided to access elements. The isEmpty() method is renamed to empty()
and the methods reordered to match the std::vector class.
As applications need access to the Stream instances associated with the
configuration entries in order to associate buffers with streams when
creating requests, expose the stream selected by the pipeline handler
through a new StreamConfiguration::stream().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to prepare for an API overhall of the camera configuration
generation, remove the StreamUsage class and replace its uses by stream
roles. The size hints can't be specified anymore, and will be replaced
with an API on the StreamConfiguration to negotiate configuration
parameters with cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Rename the configureStreams() and streamConfiguration() methods to
configure() and generateConfiguration() respectively in order to clarify
the API. Both methods deal with CameraConfiguration objects, and are
thus not limited to streams, even if a CameraConfiguration currently
contains streams only.
While at it, remove the qcam MainWindow::configureStreams() method that
is declared but never defined or used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for some NV formats:
- V4L2_PIX_FMT_NV12, V4L2_PIX_FMT_NV21
- V4L2_PIX_FMT_NV16, V4L2_PIX_FMT_NV61
- V4L2_PIX_FMT_NV24, V4L2_PIX_FMT_NV42
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is not sustainable to add a new flag for every new video format
family (eg. YUYV, RGB, NV, MJPEG, etc), so add a formatFamily enum to
indicate these in the FormatConverter.
Note that formats are grouped into families based on if they are able to
share a set of parameters for conversion.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for the RGB format supported by VIMC (V4L2_PIX_FMT_BGR24,
V4L2_PIX_FMT_RGB24 and V4L2_PIX_FMT_ARGB32).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Name all instances of CameraConfiguration "config", and all instances of
StreamConfiguration "cfg" accross the cam and qcam applications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Several of our structures include width and height fields that model a
size while we have a Size class for that purpose. Use the Size class
through libcamera, and give it a toString() method like other geometry
and format classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The cam and qcam utilities are meant to be shipped with libcamera,
install them by default.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the camera configuration thru out the library, tests, cam and
qcam tools.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of requesting the default configuration for a set of streams
where the application has to figure out which streams provided by the
camera is best suited for its intended usage, have the library figure
this out by using stream usages.
The application asks the library for a list of streams and a suggested
default configuration for them by supplying a list of stream usages.
Once the list is retrieved the application can fine-tune the returned
configuration and then try to apply it to the camera.
Currently no pipeline handler is prepared to handle stream usages but
nor did it make use of the list of Stream IDs which was the previous
interface. The main reason for this is that all cameras currently only
provide one stream each. This will still be the case but the API will be
prepared to expand both pipeline handlers and applications to support
streams usages.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Meson searches for qmake to determine if QT5 is available to support the
optional qcam component.
When cross compiling, meson can incorrectly identify the host qmake
which will cause incorrect linkage and usage of system headers.
Set the dependency method to specify pkg-config which resolves the
issue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the camera provides MJPEG, use the QImage JPEG decompression code
to convert that to RGB.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
qcam is a sample camera GUI application based on Qt. It demonstrates
integration of the Qt event loop with libcamera.
The application lets the user select a camera through the GUI, and then
captures a single stream from the camera and displays it in a window.
Only streams in YUYV formats are supported for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
